About adobe video rander encoder!!!!

Hi,everyone
I have a big question about encoder,it confuse me.
I want to make a red title on white bakcground,and I use H264 encoder as commonly used.
The final video seems like the title have a shadow or bevel ,it looks like 3D, but what I want is flat effect.
Here the screenshot below.
1.preview in AE,the edge between two colors is clean .
2.preview of video with quicktime animation,There are some shadows about 1pixel at the edge between two colors.
3.preview of video with quicktime H264,become worst!
Is anyone knows how to do? Is it a unsolvable technical problem?Help me pls!!!

You're running into low color-subsamping and minmal luma contrast. That is, the colors are highly saturated and change abruptly from one hue to another, but the luma values aren't that much different. That is pretty much worst-case for a highly compressed format like H.264.
Try reducing the saturation of your colors. If the problem is specifically red-on-white, try reducing the saturation of the red and also reducing the brightness of the white. You can also try a slight horizontal blur prior to compression. None of that will eliminate the problem, but may make it a lot more acceptable. You'll be surprised at how much you can desaturate the red with it still looking "bright red" on your final LED display device.
(Highly saturated, bright red is the worst color there is in terms of artifacts in highly-compressed codecs, although fluorescent orange safety vests and traffic cones may be worse.)

Similar Messages

  • Can Adobe Live Media Encoder encode with Left audio only?

    Hi all,
    I have a live feed video that contain dual audio (left = Englisg, right = Chinese).
    Can i use Adobe Live Media Encoder to encode with English audio mono ONLY so that FMS can stream it to user with left&right = English audio?
    Thank you.

    Are you  talking about Adobe media Live encoder and "Adobe media Server"...Just can publish from "Adobe media Live encoder"  and publish to "Adobe media server"..
    This is a adobe media server forum...and your question it seems lies in the domain of encoders.

  • I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

    I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

    Hi
    Uninstall the Adobe Application manager from your computer.
    and download the latest version of the AAM from the below mentioned sites.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
    Once installed , Then try to update the application by launching the application and Help--> Update
    Hope It Helps
    Thanks

  • Adobe CS6 Media Encoder encoding 4K video

    When will Adobe CS6 media encoder be upgraded to process 4K video or encode into h.265?

    There will be no changes to Adobe Media Encoder CS6 (6.0). That is a version that is several versions behind the current version, Adobe Media Encoder CC 2014.1 (8.1).
    Regarding changes to the current version:
    You can make feature requests here.

  • I want stream my Video on my dedicated server with Adobe Flash Media Encoder but server dont have sound card what to do

    I want stream my Video on my dedicated server with Adobe Flash Media Encoder but server dont have sound card what to do

    You can not install it.
    Only apps from the official Apple App Store can be installed.

  • Video player to Adobe Flash Media Encoder

    Hi i want stream same video with Adobe Flash Media Encoder what software i can use now im using manycam but quality is no good plz for help.

    You can increase the buffer to 5 seconds, click on the auto adjust and drop frames (recommended over degrade quality in my opinion as it can change the pitch of the audio), then change the buffer to 5 seconds.
    Googled this image:

  • About Adobe Flash Media Live Encoder Compatibility

    Hello Adobe supports and everyone,
         I would like to ask for some information about Adobe's product that Adobe Media Live Encoder (Version 3.2)
    can work with SDI capture cards below on Window plateform...or not?
    1. Black Magic Design: Decklink Quad (I see that Decklink HD Extreme 3D is in compatibility list, but I'm not sure
    with Decklink Quad)
    link to ---> http://www.blackmagic-design.com/products/decklink4k/techspecs/
    2. Elecard HDAccess 2
    link to ---> http://www.elecard.com/assets/files/manuals/hdaccess/Elecard_HDAccess2.pdf
    Thank you.

    http://forums.adobe.com/community/flash/flash_media_live_encoder

  • Novice to Adobe video issue after encoding.

    Hi
    Im very new to Adobe Premiere Pro and Adobe Media Encoder so I realise it might be something I havent or have done to give me my problem.
    Im attempting to create a Minecraft video for YouTube, Using Fraps as the recording program and Adobe Premiere Pro as the video editor.
    My Adobe is the CS4 version
    I have looked at tutorials and followed several different people that are using the same programs as I am but every video I make goes into Adobe Premiere pro good quality but after the Adobe Media Encoding is complete I get like a Motion Blur that was not seen any where during editing.
    I was wondering if this was something I had done or not done, ive tryed many different settings both presets and custom found on the tutorials but what ever I do the final video has this Motion Blurr.  Also when the final video has encoded it has like a grey film over the video rather than crisp, which I think is causing the issue.
    I have included some settings that I am currently using but as I said it happens on all settings.
    The specs that I am using are
    Fraps:
    Recording at 30fps
    Screen Size 1920x1080
    And for Adobe Premiere Pro
    New project settings: are all default except the Capture format which I changed to HDV (Ihave also tryed DV with the same problem)
    New sequence settings: HDV 1080p30
    Adobe Premiere Pro Export Settings
    Format is H.264
    Preset is custom following the HDTV 1080p 29.97 High quality setting, these settigns are as follows:
    Video Settings:
    TV Standard: NTSC
    Frame: 1920x1080
    FPS: 30
    Pixel Aspect Ratio Widescreen: 16:9
    Profile: Main
    Level: 4.2
    Bitrate Settings are
    Bitrate Encoding: VBR, 1 Pass
    Bitrate Mbps is 8-8
    Ive tried to include as much detail as possible.
    Any Help would be appriciated thank you.

    I'm not entirely sure how much difference this will make, but have you tried VBR 2 pass encoding? It'll take longer to encode but you should get a better result.

  • Can anyone recommend a Windows 7 compatible USB audio/video interface for Adobe Media Live Encoder??

    Any suggestions?  Also, are they hardware appliances that replace Adobe Media Live Encoder?

    I use this one with Windows 7:http://www.chronos.com.tw/Product/E/2/USB%20Movie%20Editor/USB%20Movie%20Editor.htm
    It worked bad with out of box Windows 7.
    But after all updates it works very well and stable.
    A nice thing is that it has little USB extender cable included. So it is less harmful for laptop usb port.

  • Adobe flash media encoder compatibility with the lion mac mini server

    Can anyone tell me if the adobe flash media encoder is compatible with the lion mac mini server?

    I am running adobe live flash encoder on a new mac-mini server with Lion and am able to stream video just fine - however I get a hum in the audio. I am not sure whether the hum is caused by the audio input, the camcorder, the adobe encoder, or the combination, but it seems to be the camcorder's fault.
    There is a manual about migrating or upgrading to lion server, but none about instituting a new capability from scratch

  • Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

    can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • Upload Adobe video to my site? {subject edited by moderator}

    Hello! How are? I've got question,please.I create my own site and I want to upload on a site the video from Adobe.com.For example : video about "Dreamweaver" captured by Adobe. Is it legally?

    Thank you very much. That's all right.
    Отправлено с iPhone
    23 ביול 2014, в 17:20, Preran <[email protected]> написал(а):
    Upload Adobe video to my site? {subject edited by moderator}
    created by Preran in Dreamweaver support forum - View the full discussion
    Thanks for simplifying this for everyone, Murray.
    Antimusic: While it is not possible to upload an Adobe video to your site, you can embed a video from http://tv.adobe.com using the embed code for the video. Is that what you were looking for?
    Thanks,
    Preran
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6576208#6576208
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver support forum by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Adobe Flash Media Encoder 3.0 Crashes

    Hi, i just installed the new Adobe Flash Media Encoder 3.0 ,
    and when i start it all it does is show up the main screen and then
    closes automatically NO error messages at all!! Adobe Flash Media
    Encoder 2.5 works fine... Any Fix or idea why ?

    sort of same issue here, I downloaded encoder 3.0 and it crashes my pc about 20 seconds after start encoding any suggestions, it also now has issues getting into my livestream.com studio
    And where do i try and delete the xml im dumb
    steve

  • How can i use adobe flash media encoder 3

    how can i use adobe flash media encoder 3

    Flash Media Live Encoder is NOT
    "a codec program to change the parameter of the video format"
    Adobe Flash Media Encoder is:
    http://www.adobe.com/devnet/flash/quickstart/video_encoder.html
    Are you just spamming...
    or is there a legit question involved?
    Adninjastrator

  • Adobe Flash Media Encoder not detecting internal camera

    I'm running OS X 10.8.5 and it won't detect the camera. I've installed the latest update from Apple that's suppose to address this error. After installing the new update I reinstalled Adobe Flash Media Encoder and it still doesn't work. The camera is also not being detecting on Skype. Reisntalled this as well. Anyone running into the same problems post update?

    Verify that you are using the latest Flash version that works with you system:
          http://www.adobe.com/software/flash/about/
    If you need to update, use your Mac's Disk Utility to repair permissions.
    Then follow Adobe's instructions here:
    http://kb2.adobe.com/cps/908/cpsid_90893.html
    Be sure to uninstall your current Flash player before installing the new one.
    Repair permissions again immediately following installation of the updated Flash player.
    Be aware that the current Flash Player Preferences can be configured to block your camera in your Mountain Lion Mac's System Preferences.  However, you still configure Flash settings as shown here: http://tinyurl.com/5kjv3
    Message was edited by: EZ Jim
    Mac OSX 10.8.5

Maybe you are looking for