About adobe

first does this cost anything and second I have been having
to upload adobe constantly to watch/listen to videos on youtube can
anybody help me with the problem

The Flash Player plugin and/or activeX controls are freely
available from
http://www.adobe.com/go/getflashplayer.
There are various issues around the installation process,
almost exclusively involving the Windows version of the Flash
Player activeX control. For your issue please open a web support
case via
http://www.adobe.com/support/flashplayer
(note that support is email only).
Bentley

Similar Messages

How can I lodge a complaint about Adobe Flash Player?

How can I lodge a complaint about Adobe Flash Player? When I updated Adobe Flash Player this morning it also installed a McAfee scanning software without any warning or notification. I find this totally unacceptable. But I cannot find any information on the Adobe website that will allow me to lodge my complaint. Which I also find totally unacceptable.
Ho hum.

This is a an old complaint. I would have thoughtas much bad karma as Adobe has received would have stopped this practice espcially since it found that many time McAfeee either gets protection signatures wrong or cause more problems than it fixes.
I don't know whether mailto:[email protected] is still effective.
At one time a disgruntled Adobe products user created a FaceBook or twitter page. And many in past have claimed when there complaints got ignored or laughed at by Adobe. They suddenly got action whe airring their complaint on this FaceBook or Twitter page.
There should be a big warning Box stating:
Adobe is about to install a package Called McAfee on your computer. If you do not wish to instal click checkmark here.
Do you wish have Adobe install Products not requested on your computer yes__ or no__ please use a √
And to adhere to wishes of the customer.

Questions about Adobe Muse CC single-app membership.

When speaking to adobe customer service reps about Adobe Muse I feel like their taking me around in circles. My annual membership to the current Adobe Muse is going to expire in June. So before I sign on for another year I had some basic questions that seem to be baffling the adobe reps. one rep called Travis just hung up on me.
My questions;
With an Adobe Muse CC single-app membership.
Can I host a site on Business Catalyst for free?
The rep said I have to purchase Business Catalyst separately from Adobe Muse
This adobe page says, “An Adobe Muse CC one-year single-app membership includes hosting for one webBasics site
(http://www.adobe.com/au/products/muse/faq.edu.html)
How much space do I get on www.creativecloud.comwith a single-app membership?
The rep said I get 20GB when Adobe Muse becomes Adobe Muse CC in June
I currently have Adobe Muse and I have 20GB of space on creative cloud.
This adobe page says I get 10 GB (http://www.adobe.com/au/products/muse/faq.edu.html)
This adobe page says I get 20 GB (http://www.adobe.com/au/products/muse/features.edu.html)
Can someone pleas answer these questions!

With an Adobe Muse subscription, you get BC website hosting for 1 webBasics site. With a subscription to the creative cloud, hosting for 5 webBasics sites are included.
Single app subscriptions get 20GB of storage space on creative cloud.
I'll try to get that first link updated with the correct info.

Hello. I have adobe forms and received the alert that it will be ending in July. Then I received an email about Adobe Acrobat XI Pro which can create forms. I signed up for the free trial and when I began to make a new form it brings me back to Adobe Form

Hello. I have adobe forms and received the alert that it will be ending in July. Then I received an email about Adobe Acrobat XI Pro which can create forms. I signed up for the free trial and when I began to make a new form it brings me back to Adobe Forms. My question is, when Adobe Forms ends on July 28th will Adobe Acrobat XI Pro be able to create forms or will it now? and if not, then why is adobe advertising for it still?

What you're calling "Adobe Forms" is really Adobe FormsCentral. The FormsCentral service is indeed going away soon, but you can always create PDF forms (AcroForms) with Acrobat. Acrobat also comes with a desktop version of the FormsCentral desiger, which can be used to create simple PDF forms that can be used apart from the FormsCentral service. So you'll no longer be able to create and host web forms with the FormsCentral service or use PDF forms with the FormsCentral service. You will be able to create standalone PDF forms with Acrobat and simple PDF forms with the FormsCentral desktop app.

Can I add my plugin to the "About Adobe Plug-Ins" dialog box?

Hello,
I have created my own Adobe plug-in (.api file), placed it in the plug-ins folder and it's loading and working as expected :-)
However, when I launch Acrobat and navigate to Help > ''About Adobe Plug-Ins", my plug-in is not listed.
Is it possible to have my plug-in listed in the 'About Adobe Plug-Ins' dialog box? Or is this reserved for Adobe certified plug-ins only?
Thanks!

Excellent - good work!
You would be listed in the "About 3rd party plugins" section IF you added an about item from your plugin.

Why is Windows Defender telling me to give information about Adobe?

It's telling me to send information to Windows about Adobe after installing a Reader update. What is this?

I am on our enterprise configuration management team and we are using BMC Blade Logic for Client Automation (Marimba) to deliver the msi. The MSI that we are installing is AdbeRdr11002_en_US. Marimba simply delivers the MSI and triggers an install.
Reader XI installs just fine, but Windows Defender then pop ups the "submit this to Microsoft" type message which leads me to believe that Adobe just needs to submit information to Microsoft to ignore their product in the defender scan. I have tried going down the MS support route but so far its been unsuccessful.

What to do about Adobe Photoshop CS6 13.0.1 Error Code: U44M2P6

what to do about Adobe Photoshop CS6 13.0.1 Error Code: U44M2P6? tried repeated installs and reboots. Nothing works. Am using Windows 8.1.

some files have probably been removed from your original installation. system cleaners/optimizers often do that.
to remedy, reinstall ps cs6 and retry updating.

No "About Adobe Reader" tab... How to check for updates?

How do we check the version of Adobe Reader installed on an Android 4.3+ device? Especially, how do we check that all security patches have been installed? There is no (apparent) "About Adobe Reader" tab.

Hi,
There's "About Adobe Reader" page which tells you the App version. The page comes by "Select help tab", press the hardware Menu button (or select the action bar overflow button on top right) and then select "About Adobe Reader".
For the various new features in Reader and other Help related stuff, you can go to the "Help" tab and find various options there.
Please let us know if there are any issues.
Thanks,
Adobe Reader Team

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

About Adobe Flash Media Live Encoder Compatibility

Hello Adobe supports and everyone,
I would like to ask for some information about Adobe's product that Adobe Media Live Encoder (Version 3.2)
can work with SDI capture cards below on Window plateform...or not?
1. Black Magic Design: Decklink Quad (I see that Decklink HD Extreme 3D is in compatibility list, but I'm not sure
with Decklink Quad)
link to ---> http://www.blackmagic-design.com/products/decklink4k/techspecs/
2. Elecard HDAccess 2
link to ---> http://www.elecard.com/assets/files/manuals/hdaccess/Elecard_HDAccess2.pdf
Thank you.

http://forums.adobe.com/community/flash/flash_media_live_encoder

HOW DO YOU GET TO ASK A QUESTION AND GET AN ANSWER ABOUT ADOBE

HOW DO YOU GET ANSWER ABOUT ADOBE
MESSING WITH EVERY THING I TRY AND DO ON MY COMPUTER IS THERE AWAY TO SET IT SO IT WILL NOT MESS WITH EVERYTHING I DO ?
[edited by forum host - you have violated the Community Guidelines on acceptable language]

Well, the first thing to bear in mind that we are all just folk like you who use Adobe products. And we choose to share our time here helping people.
So, you need to be
1. Informative. What EXACTLY happens. Give details, exact messages, screen shots, whatever.
2. Polite. Because if we don't take to you we just won't help. You should understand that posting in all caps is considered rude, like going into a store SHOUTING. Unlike the store staff we don't have to deal with you, we can just ignore you. I know you explained why you use caps in another message, but seriously, it really hinders your chances of getting help. No wonder you find it FRUSTRATING.

About adobe forms...

Hi abapers,
i recently dowloaded sap netweaver 2004s trial version.
now i want to start doing adobe forms in that version.
can anyone tell me how to start adobe forms like thru which t-code etc.,.
i m new to adobe forms and i got some material thru sdn and i m in confusion state like how to start?
do i need to install any setup if i want to start adobe?
waiting for the replies.
Thanks...

Hai.
check this.
look at the Adobe page here in SDN:
Use the Tcode : SFP
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
follow these links.
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sapfinug.fi/downloads/2006/seminaari/uudet/SAP_Adobe.pdf
https://weblogs.sdn.sap.com/weblogs/topic/45?x-o=50
Interactive Forms based on Adobe software is SAP's new solution for forms development. Its first release has the focus on interactive use of forms. High-volume printing is supported in principle, but - being a new solution - the performance has not yet reached the same level as Smart Forms or SAPscript, two established solutions that had years to grow. Interactive Forms is the only solution that will continue to be enhanced with new features, while SAPscript and Smart Forms will be supported without limitations.
When (or if) to move to Interactive Forms depends on your requirements. For interactive forms usage, i.e. the new functions, you have no choice, as the existing solutions don't support it. High-volume print scenarios need to be carefully analyzed to see whether your concrete requirements can be met at this point.
However, it is possible to move to Smart Forms and design your forms in such a way that a migration at any point in the future would be but a small step. Smart Forms offers from Web AS 6.40 a migration wizard to Interactive Forms. Technically, everything can be migrated, but we recommend against things like ABAP program nodes, for example.
You are not forced to ever go to Interactive Forms if you don't want to. It really depends on whether your client needs any of the new features in Interactive Forms. Also, if they are currently working with JetForms, they could enquire with Adobe directly what migration path they offer to the joint solution.
go thru this links
http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm
example
To get an overview idea about Adobe forms ,
Using SFP Tcode , first you need to create a interface . in interface you can declare the import and export parameters and also the declaration part, coding etc : This is nothing but similar to Function module interface.
And now we have to create the Form which is interactive. Create the form and enter the interface name which you have created in first step, so that the parameters , declarations of fields etc : will be copied and available in the form layout. So that you can drag and drop these declared fields ( dclared fields of interface ) to the layout.
Create the context and layout in the form.
The layout generated can be previewed and saved as PDF output.
Now we need to integrate the driver program and the PDF form to get the final output as per the requirement.
On activating and executing the form you will get a function module name just similar to smartforms.
The driver program needs to call this FM.
Refer to the below sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards.
sowjanya.b

Hello, I want to post about adobe color on my blog.. so can I know what is performance property of adobe color??

hello, I want to post about adobe color on my blog.. so can I know what is performance property of adobe color??

Just as of late I noticed that Apple Stores are selling security cameras that work with their app on an iPhone. Very expensive but it uses both WiFi when local and cellular when not at home.
In your case I would check the apple store and see if there is a free or paid app to access your home closed circuit TV system. The cameras have to have their own ip address so you then need only enter that and access will be available to you. But they must be on your home network.
a lot of the higher end CCTV systems have a free app that can be used like the new Apple Security system.
Just Google it or check the store.
Good Luck

Is Dreamweaver right for me? (also Question about Adobe courses)

Hi!
I'm a grade five student,
who is wanting to learn about
web design and animations.
I already have Photoshop cs5
but i want to learn about web design.
Dreamweaver is the correct program right?
I also have a question about Adobe Courses (Online)
Will they go through, and show you how to set up websites
with dreamweaver... Templates, etc. stuff like that?
All comments appreciates.
Thanks
CG

I am hardy the most qualified to answer this, but I'll have a go at it. First of all, I admire your ambition!
Dreamweaver is a great tool, but it will not necessarily teach you web design. Once you have some basic idea of what goes into a web design, you will realy appreciate what DreamWeaver can do for you. I am going to pass on to you the same advice given to me when I first wanted to get into DreamWeaver and web design.
I would realy suggest some basic HTML and CSS books and use a text editor to create your first pages. Once you start to undersatnd what you are doing, then by all means, get some DreamWeaver training. Everyone has their own favorite titles to learn the basics from, so I'll just say these are a suggestion and helped me get started. The Head First series was clearly written, has a good sense of humor and helped me get the basics. Check your Libraries, second hand book stores, or other resale outlets. I know you mentioned the Adobe Online, but I've also used, and like, the Adobe Classroom in a Book series. Once I learned a particular version, I found the Missing Manual series good for advanced questions and going to a new version.
Don't get discouraged, stay with it and don't be afarid to try another book if you don't like the ones I've suggested. We all learn different ways and what worked for me may not work for you!

Two Questions about Adobe CS6

I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Thanks

1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
Yes.
It will depend on the degree of lens edge intrusion into the frame,
but an enlargement of 5-10% or so is not a big problem.
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Oh, yeah... lots of options (including many 3rd party plugins).
Premiere color correction
FAQ: How do I learn Premiere Pro?
http://forums.adobe.com/thread/878529?tstart=0
Getting Started with Premiere Pro CS6
http://www.video2brain.com/en/getting-started-with-premiere-pro
Adobe Premiere Pro Help and tutorials
http://helpx.adobe.com/premiere-pro/topics.html
Premiere Pro CS5-CS6 Reference
(.pdf 12 MB download)
http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

Questions about Adobe Interactive Forms

Hi everybody,
I have some questions about Adobe Interactive Forms with CRM 2007.
I can create AIFs with the Template Designer via the WebUI. These templates appear e.g. for the account in the selection PopUp "Create from template". But these templates are not interactive at all, just the BP-information is displayed.
Is the template-function only a static way to create a static PDF from the BP-information? Or is there a way to have the BP-information loaded to the PDF but still interactive input to communicate via a webservice?
Thanks a lot for answers.
Regards,
Ben.

My really modify is :
CLASS: CL_CRM_WFD_ASSIGNMENT_FOLLOWUP
METHOD: GET_ATTACHMENT
ORIGINAL CODE:
cl_crm_oi_ads=>call_ads(
        EXPORTING
          iv_xml_string      = lv_ws_data
          iv_xdp_string      = lv_template_data
          iv_returntype      = lv_doc_type      "cl_crm_oi_ads=>gc_doc_type_pdf
        IMPORTING
          ev_result_document = lv_pdf_xstring
NEW CODE
cl_crm_oi_ads=>call_ads(
        EXPORTING
          iv_xml_string      = lv_ws_data
          iv_xdp_string      = lv_template_data
*{   INSERT         CRDK900138                                        1
* Modify for correct Interactive Form
          iv_fillable        = 'X'
*}   INSERT
          iv_returntype      = lv_doc_type      "cl_crm_oi_ads=>gc_doc_type_pdf
        IMPORTING
          ev_result_document = lv_pdf_xstring

About adobe

Similar Messages

Maybe you are looking for