About:blank - flash popup is blank

When going to yahoo maps (the new version that runs on
flash9), when clicking on "printable version" I get a blank page
that pops up with "about:blank" in the address bar and a completely
blank page. Problem is with ie7, but Firefox works fine.
Also...different issue... when going to "
http://www.adobe.com/cfusion/webforums/forum/index.cfm?forumid=15"
the links from home to help are all layered on top of each other
and it looks like one big blurry word.
Attempts made to solve problem #1:
- ran cwshredder to resolve any about:blank issue that could
possibly exist, none present.
- reset all ie7 setting back to default, uninstalled flash
(using the uninstaller from add / remove programs and the program
provided by adobe) and reinstalled using the manual and automated
installations
- everything works fine in firefox

So you are running another WD Component/Application within an iFrame of a parent WD Application? This is not a recommended or supported appraoch. You should not use iFrames to intgrate WD Components. Instead use Component Usages to embed the component within another component (use the ALV as an example).

Similar Messages

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI
I filled in this form with important data. And saved it. I have since opened it and printed it again. Now when I open it the fields become blank I can see them for a split second as it clears them.
I believe I have updated to Reader XI since I filled it in.

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

My macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

my macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

Bummer. Could be a problem with the MBP drive. Are you using Re-writable discs maybe?
Check the discs work in your HP machine. They may have burnt but not successfully. Your HP machine may not be able to open them either.
Have you considered using a USB flash device to transfer the photos, or just copy them over your home network? CD is a slow an cumbersome method.

How can I lodge a complaint about Adobe Flash Player?

How can I lodge a complaint about Adobe Flash Player? When I updated Adobe Flash Player this morning it also installed a McAfee scanning software without any warning or notification. I find this totally unacceptable. But I cannot find any information on the Adobe website that will allow me to lodge my complaint. Which I also find totally unacceptable.
Ho hum.

This is a an old complaint. I would have thoughtas much bad karma as Adobe has received would have stopped this practice espcially since it found that many time McAfeee either gets protection signatures wrong or cause more problems than it fixes.
I don't know whether mailto:[email protected] is still effective.
At one time a disgruntled Adobe products user created a FaceBook or twitter page. And many in past have claimed when there complaints got ignored or laughed at by Adobe. They suddenly got action whe airring their complaint on this FaceBook or Twitter page.
There should be a big warning Box stating:
Adobe is about to install a package Called McAfee on your computer. If you do not wish to instal click checkmark here.
Do you wish have Adobe install Products not requested on your computer yes__ or no__ please use a √
And to adhere to wishes of the customer.

When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install a

When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install apps?

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Flash link(button) problem via xml link (Flash popup error)

hi...
I'm getting a problem when i run a swf file from HTML/Outside(i mean to say from folder) and click on the button (button calling xml file which has link in it), i get a adobe flash popup error/msg. As shown below....
my codes are as follows
XML CODE:
<?xml version="1.0" encoding="utf-8"?>
<tree>
<link>
<port>http://www.marcomanie.com</port>
<news>http://www.asdfmanie.com</news>
<gallery>http://www.wesdmanie.com</gallery>
</link>
</tree>
My flash codes are as follows
LOADING AS
function loadXML(loaded) {
if (loaded) {
_root.port = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
_root.news = this.firstChild.childNodes[0].childNodes[2].firstChild.nodeValue;
_root.gallery = this.firstChild.childNodes[0].childNodes[3].firstChild.nodeValue;
port.text = _root.port;
news.text = _root.news;
gallery.text = _root.gallery;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("linker.xml");
BUTTON AS
on (release) {
getURL(_root.port, "_self");
Pls let me know what i have to do, to get away with that error
im very much new to these kind of errors, any fast help will be appreciated.
thank u
sunder

fix your security settings to trust that swf:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

Check Your Plugins gives a wrong answer about Shockwave Flash

Fist of all, the page lists [http://www.adobe.com/products/shockwaveplayer/ Shockwave Flash] but it reports details about [http://www.adobe.com/software/flash/about/ Macromedia Flash]. This is in concert with the terminology used in the Plugin Manager; I wonder whence this error came from.
Now to the important part: The page [http://www.mozilla.com/plugincheck/ Check Your Plugins] tells me I have Shockwave Flash 10.3 r181 and it is up to date. However, [http://www.adobe.com/software/flash/about/ Adobe Flash Player] tells me I have 10,3,181,14 installed while current is 10.3.181.22. The difference is [http://www.adobe.com/support/security/bulletins/apsb11-13.html CVE-2011-2107], so this mistake is not harmless.

16.0.0.'''296''' is the most current on https://www.adobe.com/products/flashplayer/distribution3.html and is indeed vulnerable though in next day the 16.0.0.'''305''' may be there.
However if you have automatic updates enabled in Adobe Flash player it should give you the new update 16.0.0.'''305'''
https://helpx.adobe.com/security/products/flash-player/apsa15-02.html

Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

Hi
a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
e. Can You describe the material used to create Your DVD
- Video Codec/s
- Photo file formats
- Audio file formats
iDVD can not use all but only a few of them - still it tries and then often fails
Just to start by.
Yours Bengt W

Please take a survey about using Flash

We are conducting two brief surveys to learn more about how customers get information about using Flash. We'd like your feedback. Please click a link below to take a brief survey on one of the following topics:
Using Video in Flash
Creating Buttons
Thank you.
Jay Armstrong
Adobe Learning Resources team

The question that most individuals ask is how can a person be sure that it is the good time to perform an alcohol or drug intervention. Some signs can be seen and once one is aware of them, its easier to decide a great time for an intervention. For example, a dependent person that drinks alcohol or does drug on a regular basis might begin changing his or her habits, spend ridiculous quantities of money to continue their dependency, less communication with the people that surround him or her, loss of weight, etc
mukesh
Paid Surveys-Paid Surveys

Flash Popup Window

Hey, I want to make a flash popup window that opens up
another frame on the click of a button. I want the window to be a
custom size and custom options like a javascript popup window. I
tried a few things with javascript but none of them worked. I dont
want to have to edit the html, i want to just do this in
actionscript.
Somthing like this for example.
Thanks!

System Preferences->Flash Player->Storage:

Flash player 11 - blank space instead of the content

Hello,
Adobe Flash Player 11 is not working for me !
Here's some information about my laptop: HP G60 AMD Sempron 2.00 GHz Memory (RAM) 3,00 GB 32-bit operating system WINDOWS VISTA
My current browser: Mozilla Firefox 5, but pretty much the same thing happens with IE.
Adobe Flash Player 10 seems to be working for me, only there are some websites that require to update my version to view their content. When I do so (it says my installation is successful), I can't access flash content at all (instead I see blank space), nor can I see the picture that's saying which flash version I run (instead - blank space).
Can you please help me with this issue ? Thanks !

Did you mean Firefox 15 or 5? 15.01 is the latest release version.
When you install 11.4 (http://get.adobe.com/flashplayer) what do you see when you visit this page: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
If you just get white space, check Firefox's Add-ons page and click the Plugins tab. Do you see a listing for Shockwave Flash? If so, is it disabled or enabled? What version is reported?
Thanks,
Chris

Flash Loading With Blank Screen?

I have a flash movie that has an mp3 file on one of the layers. The mp3 file loads fine and plays but when the flash movie first appears on the page it comes up as a blank white box, then it eventually loads 5-6 seconds later. I see the pre-loader for a split-second right before it loads. Shouldn't I be seeing the pre-loader bar right from the beginning? and see the progress bar? Why am I seeing nothing but white prior to it loading?

I've found a solution that works for my situation. I found a lot of solutions while researching this, all of them quite messy. But you gotta do what you gotta do I guess. Anyhow, rather than rewrite what I did, this tutorial pretty much sums it up -
http://www.8bitrocket.com/newsdisplay.aspx?newspage=10807
There are a few things to note in this tutorial, that I did not find in other very similar tutorials. Many tutorials, like this one, have you unchecking export in first frame and placing assets on the stage in an unused frame (usually frame 2). This seemed to work OK for everything except sounds for me. The sounds would work initially, but after beating the game and returning to the main menu, EVERY SINGLE SOUND would be playing. This tutorial makes a point to tell you to place the assets outside the stage area:
see step 6;
6. Put the asset holder clip on the stage in Frame 2 of your main movie (outside the viewable region)
That resolved the issue for me.
Anyhow, hope this helps some people. I now have a preloader that displays when the game is about 15-20% loaded, rather than 80%.

FF16.0.2, after updating flash plugin to 11.5.502.110, all flash content went blank, reinstall dint work.

After updating my shockwave flash player to 11.5.502.110, the flash content on pages went white blank, i can still see the bounding box of the flash content, but they are all white blank. When i right click on the content, flash context menu is not showing up as usual.
tried uninstall (from windows control panel) and reinstall, didnt work.
OS: win7
Firefox : 16.0.2
Flash plugin : 11.5.502.110
help is appreciated, thanks

Flash 9 r45 is way too old and a lot of Flash content won't work with such an old version.<br />
If you want to revert to an older Flash version then get the latest Flash 10.3 version that is still maintained with security updates
Adobe Forums: Where can I find direct downloads of Flash Player 10.3 for Windows or Macintosh?:
* http://forums.adobe.com/thread/889580

Blank flash between SWF pages

Hi all!
I am building my first Flash website and have a small
problem.
I am building it using individual SWF files for each page.
However, when I click a button to navigate from one page to
another, I am getting a flashing blank screen for just a split
second. What i mean is, it doesn't quite flow from one page into
another - just for a split second, a blank screen appears.
Anyone got any idea why this is and how to get rid of it???
THANKS ALL!
Liam

"liamfahy" <[email protected]> wrote in
message news:e80fg1$7tg$[email protected]..
> Hi all!
>
> I am building my first Flash website and have a small
problem.
>
> I am building it using individual SWF files for each
page. However, when I
> click a button to navigate from one page to another, I
am getting a flashing
> blank screen for just a split second. What i mean is, it
doesn't quite flow
> from one page into another - just for a split second, a
blank screen appears.
>
> Anyone got any idea why this is and how to get rid of
it???
>
> THANKS ALL!
>
> Liam
Instead of replacing your current object with a completely
new one, load it into a movieclip or a level instead
tralfaz

About:blank - flash popup is blank

Similar Messages

Maybe you are looking for