About BPM Message identification

please,tell me how to identify a BPM message in SXMB_MONI i.e., just by looking at the message we need to tell that

Hi,
go to transaction SXMB_MONI_BPE...all messages under that are BPM related..
More over u can see Integartion process name also..
Regards
BILL

Similar Messages

Bpm:message being sent and wait for event

Hi,gurus:
My scenario is about BPM.In the integration process I used a loop and correlation.The scenario worked successfully yesterday,but after I changed some thing,it did not work.The outbound status of the message in sxi_monitor said "message being sent".And when I clicked PE to see the workflow log, it said " wait for event".
Thanks in advance.

Could you tell me how to reimport the integration progress in ID?
reimport means...delete the already imported BPM from ID.....this would affect the corresponding ID objects....save and activate....and then again run the import Integration Process wizard....create the objects once again.....seems time consuming.....hence mentioned it as the last option in the list:(
Also from SWWL delete only the instance with status as ERROR.
Edited by: abhishek salvi on May 20, 2009 9:30 AM

BPM data increase very fast and want to get suggestion about BPM capacity

Dear BPM Experts:
I meet a problem with BPM capacity problem. My customer using BPM 11g and every day they
Have 1000 new process,every process have 20-30 tasks,they find the data increase very fast,about 1G/day.
We have done a test about BPM capacity, I create a new simple process named simpleProcess.
which only have three input field, I use API to initiate the task and submit to the next
person.
we using dev_soainfra tablespace, and we set the default audit level, after insert 5000 task, we find dev_soainfra is reach 362.375M,
So as assume 30000 task will using 362*6=2G database spaces,and because in next phases,my customer want
To push BPM platform to more customers, which means more and more customer will using this platform,so
I want to ask is it data increase reasonable? Do you have capacity planning guide for BPM 11g? and If I want to reduce
Lower The data increase, how can we do?
We have try to turn the audit log off, but it seems useless, it only save 8% spaces.
Thanks for your help!
Eric

It looks like you are writing your data to disk every so often. For that reason, I recommend making it based on the number of samples you have instead of the time. With that you can preallocate your arrays with constants going into the shift registers. You then use Replace Array Subset to update your arrays. When you write to the file, make sure you go back to overwriting the beginning of your array. This will greatly reduce the amount of time you spend reallocating memory and will reduce your memory usage.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

About the warning about changes message.

Hi all,
There is a messageChoice on the page,and the messageChoice must fire an action.But if the action is fired,then I click on the other tab or link, warning about changes message will not occur and directly farward to the other page.Is that possible that popup the warning about changes message after the messageChoice's event was fired ?
Thanks,
binghao

Hi,
this question is hard to understand. I don't see a messageChoice component in ADF Faces, can you give more details to your usecase and the components involved
Frank

Information about BPM

Hi Experts,
I am new to BPM. Past I worked on Dynpro with JAVA only. Now I am assign to BPM Application. So I need Some Information about BPM. We are using CE 7.1
1.     What is BPM? What is Use of BPM?
2.     Where we can use the BPM Applications?
3.     What is the advantages and disadvantages in BPM?
Is there any documents on BPM. Please Share to me.
Regards
VijayK

Let's start from here:
http://help.sap.com/saphelp_nw04s/helpdata/en/8e/116642a3423654e10000000a155106/frameset.htm
This is the RESOURCE CENTER:
SAP NetWeaver Business Process Management Resource Center
Some GETTING STARTED TUTORIAL:
/people/venky.shankararaman2/blog/2010/08/23/sap-bpm-tutorial-using-ce-72
SAP NetWeaver Business Process Management Resource Center?rid=/library/uuid/307336b8-098c-2d10-be9c-d41ae345f0ff

The "about:tabs" message always appears. The close button appears inactive so checking the "don't show this again" option doesn't work.

I am running Firefox 3.6.13 under windows/xp. All of a sudden, when opening a new tab the "about:tabs" message comes up all the time. I checked the box labeled "do not show this message again" but the "close" box seems to be inactive. Pressing it has no affect so apparently the option to suppress the message is not set. The new tab must be closed manually.

I lost several App Icons after install of 3.0 upgrade. Facebook, Tweetie, Birdhouse and a few others are no longer on the home screen, but they do sync through iTunes and I can access them if I move the home screen to the right (to show the spotlight search screen) and I can open them, the icons just won't show up. It is very inconvenient, hope Apple creates a fix for this soon.

What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.

HT1688 If I'm in Mexico and I'm skyping with someone in the US, will it go against my data plan or is it free? What about text messaging?

If I'm in Mexico and skyping with someone in the US, will it go against my data plan? What about text messaging?

Unless you are connected to an available wi-fi network when Skyping, when doing so via a carrier's cellular network goes against your data plan. The same when using any app that requires internet access.
SMS is exchanged over the same network as calls, so no data usage with SMS.
MMS is exchanged over the carrier's cellular data or internet network so MMS goes against your data plan.
The same when exchanging iMessages unless your are connected to an available wi-fi network when doing so.

Some question about receiving messages from Skype ...

Hello there,
I have a question or two about recieving messages from Skype users, who are not on my contact list"
1. If I have enabled to only receive messages from people in my contact list, will they be notified when they try to send me an instant message, that they need to add me first?
2. Will I still be able to see messages sent by contacts who are not in my contact list and them see my messages*, if we are both in a Skype conversation group but not on each other's contact list? *The messages either one of us posts in the Skype group conversation
I appreciate the information
Thanks
Solved!
Go to Solution.

1. The person sending this message will not receive any notification about failing message delivery. The message will just disappear in nowhere.
2. Messages exchanged in group chats will be seen both by you and the other person, even if this person is not in your Contact List.

BPM Message is incomplete. No Sender found

Hi,
i am not strong in using BPM, i have searched related to this error on sdn, but still not find.
bpm step
receive1, receive2 in fork in block, out of block transformation and then send step.
receiver determination
BSFILE01 -> BPM (no map)
BSFILE02 -> BPM (no map)
BPM -> BSFILE03 (map2)
i made two mapping in IR,
map1 : N -> 1.
BSFILE01 and BSFILE02 TO ABS(1)
map2 : ABS(1) TO BSFILE03
configuration time does not use map1,
bpm was received two receive in fork as well and then
my XI 3.0 sp info is SP15
error message on moni , but no error on PE, everything green.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">MESSAGE_INCOMPLETE</SAP:Code>
<SAP:P1>Sender</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is incomplete. No Sender found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
venjamin
Message was edited by: venjamin
Message was edited by: venjamin
Message was edited by: venjamin

Hi,
Are you trying to collect 2 different files into a single file or multiple same files into a single file?
If you are trying the former, which I think you are doing as you are using a fork with coreelation to collect the 2 files, you need to have a mapping step which will combine these 2 files into a single file ( N:1 ) mapping and , there is no need for a multiline container element as, both the files are of different message types.
Is this what you are tyring?
Regards,
Bhavesh

BPM - Message Interface

Hello all,
I have some doubts about Messages Interface used in BPM.
BPM just used Abstract Message Interfaces, but to expose the Interface to sender aplication, XI need the same Message Interfaces that is declared abstract but no abstract.
My question is how the Business Process Engine that the Outbound Message Interface, that my application is using, is the Abstract Interface that activate my Integration Process???
Regards,
Luiz

Hi
BPM can process only through abstract interfaces.
Those abstract interfaces attached to a receive step in BPM(Receive step is a mandatory step to start the integration process) are automatically assigned as inbound interfaces with respect to BPM and will be outbound interfaces with respect to sender side and similarly in the receiver side.
I didnt get your question properly.hope i am giving the answer you needed.
Thanks and Regards,
Vineetha

BPM - Message has error on the outbound side

I get this error 'Message has error on the outbound side" . I am using IDOC - BPM - JDBC. I checked SXI_CACHE and I see ret code 99 for this Integration Process. I tried to activate it. I see an error saying that ZCUST_NUMBER is not a component object of PAYLOAD. I have this context object defined on the Abstract Message Interface built to store the IDOC.
Any ideas are helpful

Michael,
The program outputs a returncode = 99 during the cache refresh of an integration process (ccBPM), with an error message that says that 'xxxx' is not a component of the 'PAYLOAD' data object.
If you are getting the above error, check OSS NOte 890760

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

BPM - Message interfaces of one component are not appearing in another comp

Hi,
We have created 2 software components(X and Y) for File to RFC scenario.
"X" SWC is dependent on "Y" SWC.
We are building sync-async bridge using BPM. We have created one BPM in X component. This BPM has the visibility of message interfaces only particular to that component only, not the other component. Though wehave created dependency between these 2 components. But without this we cannot build sync-Async bridge.
Please could you provide the inputs, so that we can proceed further.
Thanks,
Ramesh

Hi,
Where are you developing your BPM objects in X or Y ?
If X is dependendent on Y , then you can access Abstract interfaces created in the X in Y.
After creating SWC dependency, then refresh the cache and check out is it working ..
for dependency-/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
Regards,
Moorthy

BPM Message Split in Block par for Each: Just last message is sent n-times

Hello everybody,
we got BPM with a message split. In a par-for-each block the message is send.
Asuming I have 3 lines in the multiline container element, I can see in SXMB_MONI that that message is send 3 times.
The error is, that 3 times the last message is send.
Sample Error:
Message incoming in BPM:
<root>
<mymessage>M1</mymessage>
<mymessage>M2</mymessage>
<mymessage>M3</mymessage>
</root>
Messages outgoing:
<root>
<mymessage>M3</mymessage>
</root>
<root>
<mymessage>M3</mymessage>
</root>
<root>
<mymessage>M3</mymessage>
</root>
--> As you can see, just the last message M3 is send 3 times!
What can I do?
Regards Mario

If I take the payload from SXMB_MONI an try to test, I get an syntax error when I copy&paste the data into the message mapping.
This is very strange, because
a) the message mapping is done on basis of imported IDOCs!
b) the BPM works without throwing a mapping error
So what should I do?

About BPM Message identification

Similar Messages

Maybe you are looking for