About Bug ID: 4992645

In the published release notes below:
Sun Java System Message Queue Release Notes
Version 3 2005Q1 (3.6)
(http://docs.sun.com/source/819-0064/index.html)
Bug ID 4992645 was already fixed.
"Message Queue Resource Adapter: JMS Resource Adapter needs to support connection pooling."
However, as I searched for the details of the bug fix in http://bugs.sun.com, I got zero result. Is the bug id correct or has it been renamed to a different id? Would appreciate a lot if someone can give any info about this bug id.
Thanks and looking forward to your reply.

Hi Jaime,  I updated the bug. It should be visible in bug toolkit or bug search tool in 24-48 hours.  Regards, Wes

Similar Messages

  • I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (ver

    I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (version BIOS 1.7).
    After flashig BIOS I cannot change parameters "Shutdown temperatures", "Spread spectrum" and some others !!!
    When I try to do it, my computer hangs.
    I have CPU PIV-2.4-400-512 with memory 512MB Samsung original PC-800 ECC
    (By the way,there was no problems with BIOS 1.5 and CPU Intel PIV-1.6)
    [email protected]

    I have also noticed that the bios write protect control is missing.
    I don't know the reason why it's been removed but if you want to protect your bios you can set the jumper (J16) on your motherboard.
    If the jumper (J16) is shorted (Little plastic thing conecting both pins together) then the bios flash is locked and can't be updated.
    If the jumper (J16) is not shorted (Little plastic thing removed) then the bios flash is unlocked.
    Also can anyone tell me if two gameports are listed in the Device Manager after clearing cmos using bios 1.7.
    Bios 1.5 is ok apart from the fact that i can't upgrade my processor to 2.6GHz as it only supports up to 2.2GHz so if i upgrade processor i won't be able to clear cmos because of the problem with the gameports.
    I have tried everything to get rid of one of the gameports but nothing seems to work apart from going back to bios 1.5 which is no good because i wan't to upgrade my processor.

  • Does Apple know about bug in Timer that shows minutes but counts down seconds?

    I have a couple of times changed my timer from a few minutes down past zero to 59 or so to time out about an hour.  But the timer, while still showing minutes count down seconds.  This image is a captured screen shot as it is counting down seconds.  But when I cancel the timer, I get which shows the 59 minutes I expected to get.  If I press Start at this point, it will count down seconds.  If I attempt to reproduce conditions, by going to 8 or 9 minutes, then canceling and going to 59 minutes, it works.  It may be that you have to run the timer down to alarm and then try the lower setting.

    Does Apple know about bug in Timer that shows minutes but counts down seconds?
    How would we know?  Call them and ask.

  • Quick question about bug reports

    Hi all,
    I was just reading the reporting bug guidelines (https://wiki.archlinux.org/index.php/Re … Guidelines) and was wondering about the section "Upstream or Arch?".
    I'm not an expert on the particular package I want to file a bug against, so I have no idea whether the problem is upstream or Arch. Should I just go ahead anyway? I cannot find a similar bug on any upstream bug trackers.

    eggplantbren wrote:
    Hi all,
    I was just reading the reporting bug guidelines (https://wiki.archlinux.org/index.php/Re … Guidelines) and was wondering about the section "Upstream or Arch?".
    I'm not an expert on the particular package I want to file a bug against, so I have no idea whether the problem is upstream or Arch. Should I just go ahead anyway? I cannot find a similar bug on any upstream bug trackers.
    If you're not sure, try a quick post on the forums.
    In general, once you've used your google-fu you should know whether the problem is distro-specific. Its normally highly unlikely that you'd be the first in the world to run into a real bug (if no-one else has reported anything, its likely user error, especially if you're not using [testing]).

  • Want answer from Oracle about bug in Login Config Provider...

    Hello. Several days ago I posted a question about a potential bug in oracle.security.jazn.spi.LoginConfigProvider. No responses so far - Could someone at Oracle please comment about this? I am preparing to document my own solution, but I would prefer to use Oracle's - if I can make it work.
    Is this a bug or am I doing something wrong. The thread with the details is below...
    Bug in oracle.security.jazn.spi.LoginConfigProvider?
    Thanks
    Chris

    You should probably post in Metalink for 'official' responses

  • Further information about bug #4503177 available?

    Hi,
    my plattform is:
    SunOS 5.8 Generic_108528-11 sun4u sparc SUNW,Ultra-60
    the compiler is:
    CC: Sun WorkShop 6 update 1 C++ 5.2 2000/09/11
    I've encountered problems with exception-handling (not reliable reproducable).
    My application stops with signal 10 when throwing a derived exception and trying to catch the base-class.
    I've read about a bug in: "Patch README for 111685-12":
    4503177 derived exception classes not working properly
    - but this patch is for WS6U2.
    Qestions:
    Q1: What is the exact problem of bug #4503177? - I'd like to find out if this bug has anything todo with my problem!
    Q2: Is there a Bug like #4503177 in WS6U1 to?
    Q3: Is there a Patch for WS6U1 available?
    Thank you very much - bye H. B.

    You can download the free Update 2 (6U2), and then get
    the latest patches for that, which will fix the bug.It turned out, that my problem seems to have no relation with bug #4503177 - but i will update the compiler anyway - do i need to update the machines which are runnig the application beside the one i'm developing with also?
    bye - H.B.

  • An Open Letter to Apple About Bug-Ridden Logic Pro 7.1.1

    The bile rises in my throat as I write this, as it has all day struggling with the innumerable bugs in Logic. That's right, not pilot error, but de facto B U G S. Dangerous bugs.
    Today's tale is about 2/4 measures. In the score I'm writing I have a 2/4 measure. Big deal, right? Problem is, I've had to re-insert this ******* 2/4 measure about 4 dozen times today, because every time I undo an edit -- one that occurs many editing-steps after I inserted the 2/4 time signature -- the time signature disappears. Oh yes, and this signature can't be retrieved with undo/redo.
    This bug is akin to the one I reported previously where, after inserting numerous markers one after the other, and then undoing the next edit, all of the markers disappear (and can't be retrieved with undo/redo).
    Sound familiar? See a pattern forming?
    Two days ago I was working on a record for a high-profile artist. The question arose as to why, at one point in the track, the click's loud downbeat click was playing on the 3 and the soft clicks on 1, 2, and 4. The answer? Same bug! There was a 2/4 measure in that piece too, and when I undid an edit, the 2/4 measure disappeared. You want to talk about embarrassing? Want to talk about time-wasting effort?
    How wonderful for us professional Logic users that my "For Apple Employees Only" thread -- which asked that someone from Apple/Logic respond to the various problems that people were posting here -- was locked. Talk about the exactly wrong response from Apple/Logic. Couldn't be more wrong in your approach if you tried harder.
    So, Apple/Logic. What are you going to do about the plethora of other bugs that riddle this otherwise grand program? What are you going to do about your severe lack-of-communication problem? After spending $1K on your software, we deserve to know.

    William. Sorry to hear about your troubles. At times I've been tempted at times to go back to 4.8.1! In fact I'm going to be doing just that when I do a live TV performance next week where the artist I'm working with is performing live to a few sequenced tracks.
    I can imagine the difficulties that programmers may have to face in fixing bugs in a complex program such as Logic, but it's a situation that doesn't elicit my empathy for them. That's their job.
    I guess I could sum it up in the form of a quasi-parable: a composer gets a gig to write a score in the style of Bach, but he's much more well-versed with Schoenberg. Despite the composer's assurances that he can do the job, the music ends up sounding like some strange hybrid of the two. It would be quite understandable if the client were upset because he was promised an authentic-sounding, baroque score. No one feels bad for the composer, because he took a job that he wasn't qualified to do, and ultimately didn't deliver what he promised.
    Similarly, I feel hoodwinked by the promise of satisfaction implicit in the notion of purchasing the best that Apple has to offer, i.e., the most powerful computer (which my dp G5 was at the time), lastet OS, and expensive software published under Apple's aegis.
    I agree with you that there's incompetence and irresponsibility at play here. To the latter point, any decent beta tester would have discovered some of the more basic bugs in Logic 7.1.1. And here we are, vis a vis this forum, essentially publically beta-testing Logic's latest offering with zero feedback from the company, despite the fact that our respective problems are absolutely tangible.
    To the former point, I'm wondering if it's the programmers themselves who are not up to the task here, if it's management that have fallen asleep at the wheel, or some combination of the two.
    I've learned that as of last year a fellow named Bob Hunt was the product manager for Logic. If he's still currently the PM, and the feedback and problem-related posts here haven't been enough to prompt him (or someone in an official capacity) to publically address our respective issues, then I'd venture to guess that there's a problem somewhere at the top.

  • About bugs in ios7.0.2

    some times ring is not coming while call is  coming.....and there is no option to cut the call while screen is locked

    No there is not. You might be able to find something similar in the App Store that is more to your liking as far as color goes.
    You can leave feedback to Apple here (that's about all anyone can do):
    http://www.apple.com/feedback/

  • About "Bug ID:4802147" of JRE1.3.1_06

    Hello.
    When applet code causes web page to change, the area in the new
    page where the applet frame existed whitens.
    This phenomenon is reported as "Bug ID:4802147" of JRE1.3.1_06.
    Do you know any way to fix this problem by java code without changing the
    version of JRE?

    I have experienced the same problem, the interapplet communication via static variables is BROKEN (the "normal" way doesnt work either, the function getApplets() returns now (finally) all applets, but they cant by class casted)

  • What about Bug  - FRM-47316: Branch nodes with no children are not allowed

    Hi friends,
    I've just executed another inherited application (Win XP, forms 6i, client/server)..and.. the first on the screen:
    FRM-47316: Branch nodes with no children are not allowed
    The application has a "tree menu".. I supose the problem appears when it's trying to load menu nodes...
    I've searched in metalink, and it only appears a post (483897.995) saying that this is a bug, but...I can't understand if it's already solved in Forms 6i
    Any ideas?
    Thanks,
    Jose.

    Hi friends,
    I've just executed another inherited application (Win XP, forms 6i, client/server)..and.. the first on the screen:
    FRM-47316: Branch nodes with no children are not allowed
    The application has a "tree menu".. I supose the problem appears when it's trying to load menu nodes...
    I've searched in metalink, and it only appears a post (483897.995) saying that this is a bug, but...I can't understand if it's already solved in Forms 6i
    Any ideas?
    Thanks,
    Jose.

  • HT4236 i have just installed an item from my settings ,something about bugging ? after a while my phone displayed the ' connect to itunes \' icon and will not let me accesss my phone to do anything

    please can anyone help ? i have just installed an update from my settings on my iphone 4 within a minute i had the icon for ''connect to itunes ''??
    now my phone wont let me do anything ??
    i connected it to my laptop and now it says i have to restore it back to factory settings ?? i will lose media and data ?
    does this mean i will lose all my photos if i click on continue ?

    It means that you have already lost all the info that was on the phone. If you backup regularly you can restore from that backup. If you do not backup regularly your data is gone.

  • Feedback about glitches, misbehaviors errors, missing features, bugs

    I couldn't find a thread where I could submit feedback about glitches, misbehaviors errors, missing features, bugs (and things of that nature) encountered when using Edge and needed a place where I could collect them writing about them as they happen and before I forget.
    This is not a whishlist, rather simply a place where I'd like to send feedback and hopefully get clarifications on something that may be a non working feature, erratic behavior or a bug.
    That said here is the first one of them:
    Where: Edge Animate > Library>Assets
    What: Impossible to remove from the list the folder and/or assets
    When: Always
    How: After adding asset (add an image to the composition) remove the image from the composition. Then if you would like to remove that asset, there isn't an option to do so. The contextual menu only offer one choice "Reveal in Finder" (on a Mac) which is basically reading the path of the asset and opening the containing folder for the selected asset.
    Only removing the file or folder from the location (which Edge has stored as a path) would yield a removal from the list of the Library>Asset The item will be removed from the list when, upon right clicking and selecting "Reveal in Finder" Edge will not find the asset and ask the user if they want to reload the content of that list which basically will refresh the pointers and if the asset won't be found then the entry for it will be removed from the list. (Quite a cumbersome hoop-jumping just to remove an asset from the list)
    Why: Users wanting to manage and update the content of the Assets may want to see some listed but may want to ignore other entries that have been replaced with different assets, but they want to keep the files within the folder where they were originally placed.
    For instance adding images 001.jpg through 100.jpg  and later removing all odd images or even ones from the composition, the Library will still list them in the assets unless removed from that folder "physically" and placing them somewhere else doing an "update" in the library pane later as explained above. Leaving the unused assets in the list when not necessary adds to clutter and having to perform a manual workaround to update the UI isn't very efficient
    (a minor missing feature... not a feature request to start this feedback thread)
    Hope this helps keep track of issues, but if there's a better way/system, will be glad to use that instead.
    Cheers!
    tfbkny

    Bug Reporting (is there anywhere users can provide feedback about bugs/program's glitches?)
    Not knowing where to list what would appear to be bugs/glitches I'll keep adding them here and hopefully someone at the Edge Team will look into it eventually as time allows
    Issue: Min W in Symbols' stage property won't stick to percentage.
    To reproduce behavior:
    - Create symbol,
    - Double click to edit created symbol,
    - When in Symbol Edit mode, click on the stage (once),
    - Edit the Min W of the symbol's stage properties on the left "Properties" panel,
    - Without changing the value (which will be zero), toggle px to percentage,
    - Save your project,
    ...et voilà by magic the property you just toggled reverts itself to px
    (To make it stick apparently it's necessary to change the value in the text field then toggle px to % and it will be properly kept when saving.)
    side note: I don't know if that's something that can be a factor in causing the glitch, but each time a project is saved and a the user is "inside" a symbol's stage, the values in the properties panel will display the main stage properties and then will go load again the properties of the symbol being edited.
    Cheers!
    tfbkny

  • On-the-go playlist bug when it contains podcasts (will not play them)

    Hello,
    I want to report a bug in the iPod Nano 3rd generation. Here are the steps to reproduce, first to check that the playlist works with only songs, and then to see that it does not work with songs and podcasts, and lastly to see that it does not work at all with only podcasts.
    1. Clear the On-the-go playlist.
    2. Add any number of songs to the On-the-go playlist (let's say 3).
    3. Confirm that you can play the playlist by selecting it in the list of playlists and hitting the play button on your iPod. The Now Playing screen should say "1 of 3".
    1. Clear the On-the-go playlist. If it was playing it should now be stopped.
    2. Add any number of songs to the On-the-go playlist (we'll add 3 for now).
    3. Add at least one podcast to the On-the-go playlist.
    4. Highlight the On-the-go playlist in the list of playlists. It should say "4 Songs".
    5. Hit the play button. The Now Playing screen will say "1 of 3". At the end of the third song you will be returned to the Playlists screen without the podcast ever having been played.
    1. Clear the On-the-go playlist.
    2. Add at least one podcast to the On-the-go playlist. We''ll add 2 podcasts.
    3. Go the Playlists screen and highlight the On-the-go playlist. It should say "2 Songs".
    4. Hit the play button. The Now playing screen should show, the songtitle displayed is that of a song that was playing recently. There will be no album art displayed, even if that last songs did have album art associated with it. The screen will say "1 of 0" and there is no sound. There is no play/pause indicator next to the battery indicator. The time indicators are "0:00" and -"0:00" left and right respectively. You can hit the center button and try to scrub the position on the bar, it will not go beyond the time of the last song that was played on the iPod.
    Should you reset the iPod and try to play the playlist with only podcasts now, the screen will have no song information, just the missing album art picture and "1 of 0". There is also no time indicators and the bar on the bottom is as wide as the screen minus its normal padding.
    If you hit the center button while in the Now Playing screen with the "1 of 0" display, and you then try to scrub the player the iPod will reset.
    Can someone confirm this bug? Is there a fix?
    I really like to have multiple podcasts in the On-the-go playlist when using Nike+ and now I can't. I don't like to have to reach for my iPod during running to start another podcast, because you have to pause the workout to do that. I don't want to save the playlist, because I won't ever use it again, so I'd just have to remove it again. If it could just work, that'd be great, thanks!

    Well, I guess Apple just doesn't care about bugs in the iPhone or customer satisfaction. Just as long as they have the money they couldn't care less about anything else.
    Thanks Apple!

  • Bug report: Naming a Bin after creating it with drag'n'drop

    There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon. 
    To reproduce:
    Select some clips in your project browser
    Drag them onto the New Bin button
    A new bin is created with the clips in it
    - the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
    - type in a new name - it accepts the name fine, now press enter.
    - your new name disappears, and *now* you are really in the mode to edit the bin name
    - type your name again, and it works.
    Work around:
    When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
    (is there a better place to file bug reports?)
    Version 6.0.1 (014 (MC: 264587))
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          4
      L2 Cache (per core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MP51.007F.B03
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11
    OS X 10.6.8

    Er, just answered my question about bug reports by reading the "read this before posting" link above
    But I'll leave this here for the work-around in case anyone else needs it.

  • IPod Touch skips (jumps to the end of) the first track. Bug?

    Hello,
    I'm experiencing the following problem with my iPod Touch and was unable to find any information about similar cases in different forums:
    I have several Audible.de audiobooks on my iPod that are by default listed under "audiobooks". Recently I noticed that sometimes my Touch would jump over the first track of a music album when I would start playing the first song, directly jumping to the end of the track and starting to play the second (while the status dot stays at the end of track 1 for a while). It looks as if I had fast forwarded to the very end of the first track - and it happens with the first track only.
    I've removed all the music and books from my Touch and moved it back using iTunes, but this didn't help for long. If I completely turn off the Touch and turn it back on, the problem is solved for a moment. I kept asking myself why the problem would reoccur and it seems to me that it has to do with the audiobooks I'm listening to often. I tried the following:
    1. Switched off and on. Listened to music without any title jumping problem.
    2. Opened an audiobook and listened to it for a few seconds.
    3. Went back to music (any album) - the Touch jumps over the first track.
    This leads me to believe that listening to audiobooks (maybe just audible audiobooks) creates this problem.
    I also found out that after starting to play the first track (which gets immediately jumped over or, more exactly, to its very end), I can "heal" the Touch (until I listen to an audiobook again) by pressing Pause, then the back arrow twice so that I jump to the beginning of the first track, then back to the album cover and track list. After that, I can listen to music as long as I want to without any skipping or jumping, as long as I don't play an audiobook.
    To me, this sounds like a bug, but I can't tell if Audible or Apple is to blame. Besides, I don't see an easy way to contact Apple about a bug that might be related to their OS, which I find upsetting (they hide their contact adresses so well that you can't tell them about bugs in their own software, or you have to pay for expensive calls?).
    Maybe someone knows what to do or has already heard about a similar problem. I try to circumvent a complete reset of my iPod, as I have lots of apps that are arranged into many different groups. I'd prefer not to sort all of them again, but if resetting the iPod seems to be the only possible solution, I would try that of course. Of course I'd appreciate if someone could tell me how to fix this or whom to contact about it.
    Thanks (also for reading this long description),
    Alex
    Message was edited by: alexhager

    Hi MikeSpike,
    Thanks for your comment! Have you tried everything to resolve it, like resetting the iPod as a new device after deleting the IPSW from your computer first? Does the error still occur?
    In fact, I cannot reproduce the problem using podcasts (they work fine for me, as far as I can tell there's no effect between podcast and music on my device), but it may very well be that the error is the same or a similar one (this would be for Apple to investigate, I'll forward parts of your comment to the Apple Advisor taking care of my case, if you agree).
    Yes, it is the first track. Although I had one rare occasion where only track 2 was skipped and another one where tracks it happened to tracks 1 and 2 (no shuffle, no remember position activated), the highly reproducible issue touches track # 1 only.
    Thanks for precising that you're using a BT headset. Could you please tell me which one, in case that matters? Has your iPod sometimes reacted weirdly when you used your BT headset to remote control the iPod, for instance skipping more titles than you wanted when you pressed "forward"? This is kind of what happened to me on my iPad and since then I've noticed the error appear on the iPad too.
    Regarding your other issues, I cannot confirm the podcast problem where a podcast starts at some random point. Podcast seem to work fine in my case, but maybe all of this is caused by one and the same error. Let's hope Apple will find it all and fix it in an update asap.
    Also, I don't have the artwork problem where an album displays artwork from a different album. I have had a case where a few tracks of one specific album (and just that one) were not displaying the artwork at all, although everything was properly tagged using the software MP3Tag. If you haven't reset your iPod (as a new device, not from the backup), maybe this would at least resolve some of your problems?
    While my problem is just annoying for people like me who simply want their new device to work without any errors (even if there's an easy temporary fix or workaround to these errors so that I could live with it), your errors sum up to a nuisance that makes it hard to enjoy using the device. Having wrong artwork displayed with albums (or none at all) and podcasts being played at random positions is certainly not what you'd expect from such an expensive device.
    Have you thought of contacting Apple about it? Not only might they have a solution for your specific problems, but it might also be more convincing if more people would independently report the first-track-skipping-issue we're all experiencing! What they need to know is that the bug is global, not just a corner case, and that it seems to be somehow related to their iOS. They couldn't afford ignoring it if several people would complain about this, especially now that a new iOS beta is already out!
    Maybe some other users who read this thread have made similar experiences without paying attention to it? To all other forum users: would you please try if you notice anything weird like first tracks being skipped, either music or podcast? Maybe related to audiobook listening, maybe related to BT headset use? I'd be happy to forward any observation to Apple (to the existing issue case number) in order to better convince Apple to investigate this - asap.
    Thanks again, MikeSpike, of course I will keep you all updated if I hear back from Apple!

Maybe you are looking for