About Cisco secure ACS v3.0

HI
I have rebuilt the Tacac server for cisco secure ACS v3.0 and then retore all the data via the "data restore" under the system configuration.
After rebuilt, it was only working for one day... and then it fails to authenticate users. I checked the event viewer, the error message is:
ODBC authentication dll failed to initalise, code -1110
and
CSMon message: Problem Logging on to CSTacacs. Got as far as Starting Processing in Auth module
any idea?
Thanks

Hi
When I tried to view it, it says:
This bug is no longer available in Bug Toolkit. Click bug ID for details.
would you be able to provide more information for this bug please?
Thanks
kind regards
Rachel

Similar Messages

EAP-TLS witch Cisco Secure ACS

Hi everyone,
we have implemented wpa/leap in our WLAN. We would use certificates for machine authentication. There is a Cisco Secure ACS Server 3.3 installed.
Is it possible to use the ACS self generated certificate without a CA ?
The examples I found on the web describes only the configuration with CSACS with Microsoft CA.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a0080205a6b.html
We use Cisco AP1231/AP1232 with 12.3.4JA.
I think for machine authentication we have to install a CA. Let me know, how you think about that issue.
Armin

There are no much options on Client side: MS PEAP, EAP-TLS, EAP-MD5. ACS version 3.3 can generate self-signed certificate (for itself) without the need to install separate CA server. So I'd recommend you to use MS PEAP (PEAP MS-CHAPv2) with self-signed certificate on ACS.

Cisco Secure ACS 4.0 Solution engine problem

Hi,
I have a probleme with a Cisco Secure ACS 4.0 Solution Engine (CSACSE-1113-K9).
I try to power up the engine, but the light in the power button stay blinking all the time. Anyone have a idea why ?
Last week, I boot it for the first time (It's brand new), every things goes fine.
I made " shutdown " then wait the message to press 4 seconds power button to turn it off. This morning, nothing come up.
I see one thing in the console "Press <SpaceBar> to update BIOS." after that, blank. No bios detection, no harddrive dectection, no windows boot.
Any idea ?
Thank you

No, I'm sur.
Then we have version 1113 of ACS.
See: http://www.cisco.com/application/pdf/en/us/guest/products/ps6731/c2001/ccmigration_09186a008068f7bd.pdf
Page 32(1-8) #2.
I let the engine off about 6hours after my first post, then I try back. The engine start.
What can cause this problem ?

Cisco Secure ACS 4.2 with Oracle

hi there...
Our campus using WisM (WS-SVC-WISM-1-K9) as wireless controller , Cisco 1130 access point and Cisco Secure ACS 4.2 Solution Engine 1113 Appliance as radius server. For username and password, ACS will export the data from Oracle database(production DB).
The problem that we are facing right now is password that store in oracle database is in encrypted format. Base feedback from our database administrator, the encryption is done by oracle - application layer and cannot be decrypt back. In Oracle they call it "Oracle Stored Procedures"
My questions :
1- Can Cisco Secure ACS 4.2 work with Oracle 10G or 11G?
2- Is there any option to tackle the encrypted password? Can ACS handle the "Oracle Stored Procedures" function?
Please advice.
Thanks

Microsoft SQL Server and Case-Sensitive Passwords
If you want your passwords to be case sensitive and are using Microsoft SQL Server as your ODBC-compliant relational database, configure your SQL Server to accommodate this feature. If your users are authenticating by using PPP via PAP or Telnet login, the password might not be case sensitive, depending on how you set the case-sensitivity option on the SQL Server. For example, an Oracle database will default to case sensitive, whereas Microsoft SQL Server defaults to case insensitive. However, in the case of CHAP/ARAP, the password is case sensitive if you configured the CHAP stored procedure.
For example, with Telnet or PAP authentication, the passwords cisco or CISCO or CiScO will all work if you configure the SQL Server to be case insensitive.
For CHAP/ARAP, the passwords cisco or CISCO or CiScO are not the same, regardless of whether the SQL Server is configured for case-sensitive passwords.
Sample Routine for Generating a PAP Authentication SQL Procedure
The following example routine creates a procedure named CSNTAuthUserPap in Microsoft SQL Server, the default procedure that ACS uses for PAP authentication. Table and column names that could vary for your database schema appear in variable text. For your convenience, the ACS product CD includes a stub routine for creating a procedure in SQL Server or Oracle. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
                         if exists (select * from sysobjects where id = object_id (`dbo.CSNTAuthUserPap') and
                         sysstat & 0xf = 4)drop procedure dbo.CSNTAuthUserPap
                         GO
                         CREATE PROCEDURE CSNTAuthUserPap
                         @username varchar(64), @pass varchar(255)
                         AS
                         SET NOCOUNT ON
                         IF EXISTS( SELECT username
                         FROM users
                         WHERE username = @username
                         AND csntpassword = @pass )
                         SELECT 0,csntgroup,csntacctinfo,"No Error"
                         FROM users
                         WHERE username = @username
                         ELSE
                         SELECT 3,0,"odbc","ODBC Authen Error"
                         GO
                         GRANT EXECUTE ON dbo.CSNTAuthUserPap TO ciscosecure
                         GO
Sample Routine for Generating an SQL CHAP Authentication Procedure
The following example routine creates in Microsoft SQL Server a procedure named CSNTExtractUserClearTextPw, the default procedure that ACS uses for CHAP/MS-CHAP/ARAP authentication. Table and column names that could vary for your database schema appear in variable text. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
                         if exists (select * from sysobjects where id = object_id(`dbo.CSNTExtractUserClearTextPw')
                         and sysstat & 0xf = 4) drop procedure dbo.CSNTExtractUserClearTextPw
                         GO
                         CREATE PROCEDURE CSNTExtractUserClearTextPw
                         @username varchar(64)
                         AS
                         SET NOCOUNT ON
                         IF EXISTS( SELECT username
                         FROM users
                         WHERE username = @username )
                         SELECT 0,csntgroup,csntacctinfo,"No Error",csntpassword
                         FROM users
                         WHERE username = @username
                         ELSE
                         SELECT 3,0,"odbc","ODBC Authen Error"
                         GO
                         GRANT EXECUTE ON dbo.CSNTExtractUserClearTextPw TO ciscosecure
                         GO
Sample Routine for Generating an EAP-TLS Authentication Procedure
The following example routine creates in Microsoft SQL Server a procedure named CSNTFindUser, the default procedure that ACS uses for EAP-TLS authentication. Table and column names that could vary for your database schema appear in variable text. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
                         if exists (select * from sysobjects where id = object_id(`dbo.CSNTFindUser') and
                         sysstat & 0xf = 4) drop procedure dbo.CSNTFindUser
                         GO
                         CREATE PROCEDURE CSNTFindUser
                         @username varchar(64)
                         AS
                         SET NOCOUNT ON
                         IF EXISTS( SELECT username
                         FROM users
                         WHERE username = @username )
                         SELECT 0,csntgroup,csntacctinfo,"No Error"
                         FROM users
                         WHERE username = @username
                         ELSE
                         SELECT 3,0,"odbc","ODBC Authen Error"
                         GO
                         GRANT EXECUTE ON dbo.CSNTFindUser TO ciscosecure
                         GO
Reference:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/d.html#wp355420

Evaluation version of Cisco Secure ACS?

How can I go about getting a trial version of Cisco Secure ACS software? Do I need a CCO login account? If so, how do I get a CCO login?

Yes you need a CCO account. To get an account go to http://tools.cisco.com/RPF/register/register.do
Once your registered, login to cisco.com and go to the following URL
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-eval
You will see a download link for the 90 day eval.
HTH and please rate.

With Cisco Secure ACS For Windows TACACS+, authentication fails with AD

I am setting up a Cisco Secure ACS 4.2 server to act as a TACACS server for Switches and Routers I am using Windows 2003 server for the ACS,
and a Windows 2003 Active Directory server. The AD server is fine, as it is used for many other things.
I have set up ACS as defined nit he installation guide, including all the steps in the 'Member Server' section of the install guide
when using AD as an external database (i.e. setting up the services to run with a domain admin account, setting up a machine called 'CISCO'
on the domain etc).
I've set the unknown user policy to use the Windows database if the internal database doesn;t contain the user details.
If I add a user to the internal database, the authentication goes through fine, with an entry in the 'Passed Authentications' log,
02/24/2010,05:07:03,Authen failed,eXXXX,Network Administrators(NDG) ,X.X.X.X,(Default),Internal error,,(geting error message as INternal Error)
I've scoured google etc, and just cannot come up with any reason why this should be happening.
I've followed all the install guides to the letter. I need to get this up and running as soon as possible,
so am looking forward to finding out if anyone can help me with this one!
THanks and regards
Sharan

Hi Jesse,
Thasts a great answer and Soution.
My previous version was 4.2 and it was installed on 64 bit machine hence getting internal Error.
After this answer i have upgraded it to ACS4.2.1 and its started working fine
Thanks very much for the help
Dipu

Setting privileges in Cisco Secure ACS Version 5.1.0.44

I am setting privileges in Cisco Secure ACS Version 5.1.0.44.
In the command sets from the ACS server, I denied few commands as can be seen in the attached screenshot and selected 'Permit any command that is not in the table below'.
I am unable to see some commands like "Show running-configuration" from the router I was testing. What changes should I do to see all the commands other than the denied commands. Your help will be rated. Thank you.

Hi,
The ACS is able to handle permit or deny commands.
I created a configuration example that will help you to understand command shell.(see attach doc)
Instead of using show running-config please use show config.
also make sure that all the users are using privilege 15.
Regards,

Upgrade path for Cisco Secure ACS 4.X Solution Engine 1113 Appliance.

Hello,
I am having Cisco Secure ACS 4.X Solution Engine 1113 Appliance, and is running on version Cisco Secure ACS Release 4.1(1) Build 23 and now want to upgarde it to the latest version. Need to know the upgrade path for the same. As per my information ACS 4.1(1) runs on windows server and releases post to 5.X uses Linux. Please guide how can i upgrade Appliance 1113 from 4.1 to 5.x

Hi,
Cisco ACS 1113 appliance doesn't support ACS 5.x version. 1113 appliance supports till ACS 4.2.1 version.
Cisco ACS SE 1120/1121 appliance models are required for ACS 5.x
The upgrade path for ACS 4.1 to 4.2.1 version can be found in the following link :
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1237189
Regards,
Karthik Chandran
*kindly rate helpful post*

Cisco Secure ACS

Hi all,
With the Base license, a Cisco Secure ACS 5.6 appliance or software virtual machine can support the deployment of up to 500 network access devices (NADs) such as routers and switches. These are not authentication, authorization, and accounting (AAA) clients. The number of network devices is based on the number of unique IP addresses that are configured.
So, when i have 1 firewall for vpn gateway, and using acs as an aaa server, how much network access device which is counted ? 1 or as many as vpn client connected to the firewall ?
500 network access device means concurrent connection or not ?

ACS is based on the number of NADs (Network Access Devices) like switches, routers, ASAs, etc. So in your example, your Firewall will consume 1 license regardless of the total number of VPN sessions.
With ISE, the licenses are based on the total number of endpoints. So in your example, each VPN session will take a license.
I hope this helps!
Thank you for rating helpful posts!

Reporting & Audit Compliance Solutions for Cisco Secure ACS

The Cisco Secure ACS Access Control Server is probably the worlds best selling remote access security solutions and its quite likely that you're already using it! Wouldn't it be great to know exactly what it was doing? Further still, when you have to provide audit documentation regarding your policies and how effective they are, how long does this take and what valuable data remains locked inside the ACS database and logs?
extraxi offer a range of products that deliver a complete solution for harvesting, managing and analyzing your ACS/SBR log data to meet the increasing demands for regulatory compliance (SOX, COBIT) and overall enterprise monitoring and security.
We are proud to supply customers including Intel, Ford, Lego, T-Mobile, US Dept of State, US Army, British Telecom, First Energy, TNT Express, Kodak and JP Morgan and many more so why not take a look at our industry leading solutions and evaluate the benefits for your organization...
Featured Products:
* aaa-reports! enterprise edition - Automated Reporting
The best reporting system for Cisco Secure ACS and Funk SBR just got a whole lot better! Improved reports, enhanced filtering and query builder and now with up to 48GB internal storage based on SQL Server technology makes this the ideal solution for large or complex AAA deployments and those that need the additional functionality from the standard aaa-reports! tool.
With aaa-reports! enterprise you have a complete application for reporting including many canned reports (each with flexible filtering options) and a point-n-click query builder for designing custom reports.
For historic trending, forensics and audit compliance there simply is no better reporting application for Cisco Secure ACS or Funk/Juniper SBR.
* csvsync - Automated ACS Database & Log File Collection
csvsync allows you to download CSV log data (RADIUS, TACACS+, Passed/Failed Attempts etc) directly from any number of Cisco Secure ACS servers (Windows & Appliance) via http(s). Version 3.0 now supports the collection of ACS database itself for import into aaa-reports and detailed reporting based on the ACS security policies. Simple, secure and efficient, csvsync is the best solution for harvesting log data from your Cisco Secure ACS servers.
Download fully working 60 day trial versions at http://www.extraxi.com/rq.asp?utm_source=technet&utm_medium=forum
Fore more information please visit http://www.extraxi.com/?utm_source=technet&utm_medium=forum

bump

Patch rollup for Cisco Secure ACS 4.2 fails.

I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
Thanks

Thanks for the feedback. I attempted the patch rollup install again and it failed in the same place - on the database upgrade. I did think of one thing. Do I need to have my antivirus/protection services disabled prior to installing the rollup?
Also my versions are as follows:
Server OS - Windows Server 2003 R2
Cisco Secure ACS - 4.2.(0) Build 124
Thanks,
Richard Jaehne

Cisco Secure ACS with UCP assistance and enable password

I am running Cisco Secure ACS version 4.2 running on a
Standalone Windows 2003 Enterprise 2003with the lastest
windows service pack and update. Secure ACS is running
fine and I can authenticate with Cisco routers and
switches. The Windows 2003 server is also running Microsoft
IIS Server. In other words, the IIS server and Cisco
Secure ACS is running on the same windows 2003 server.
I am trying to get Cisco User-Changeable password to work
with Cisco Secure ACS. I followed the release notes lines
by lines and the work around provided below:
Also server require more privileges for the internal windows user that runs CSusercgi.exe.
The name of the windows user that runs UCP is IUSR_<machine_name>.
Workaround steps:
1) Install UCP 4 on a machine that runs IIS server.
2) Open IIS manager
3) Locate Default Web Site
4) Double click on the virtual name 'securecgi-bin'
5) Right click on CSusercgi.exe and choose Properties
6) Choose 'File Security' tab
7) Choose 'Edit' in 'Authentication and access control' area
8) Change username from IUSR_<machine_name> to 'Administrator' and enter his
password (make sure that 'Integrated Windows authentication' is checked)
I still can NOT get this to work. I got this error:
It says:
The page cannot be found
The page you are looking for might have been removed,
had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
I modified everything in the Windows 2003 to be "ALLOWED" by
EVERYONE. In other words, there are NO security on the windows 2003.
It is still NOT working.
The other question I have is that can Cisco UCP allow user
to change his/her enable password?
Can someone help? Thanks.

Yes bastien,
Thank you.
But one thing more i want to know that in its Redundant AAA server, when i try to open IIS 6.0 window 2003; it prompts for Username and Password.
I've given it several time; also going through Administrator account with administrative credentials but it always failed.
Any suggestions/solution/?
This time many thanks in advance.
Regards
Mehdi Raza

With Cisco Secure ACS 4.2 User accounts gets locked at first instance of wrong credentials even if configured for 3 attempts

Hello Everybody,
I am working with Cisco Secure ACS 4.2 and it is integrated with Active Directory at a Windows 2008 R2 functional level, user accounts that are set with lockout parameters (3 incorrect attempts) are locked out prematurely after the user enters the wrong credentials just once, the integration is done via LDAP.
I wonder if anybody has any idea why this is happening, because when I connect to a Cisco device or VPN, and type my password wrongly, on the Active Directory I get extra bad password counts.
Thanks in advance and regards....

Hello Scott,
Thanks for your answer. However we checked the ACS logs and it shows that we entered bad credentials just once, but in the Active Directory our account sometimes is blocked because we get at least 2 and sometimes 3 failures. This problem is only presented when we authenticate Cisco devices or through VPN, in normal circumstances, when users enter bad credentials on their computers, it works fine.
Thanks and regards...

Advice for Buying Cisco Secure ACS 3.3 for Windows

Just need advice on what other things I NEED to order apart from the Windows server when I want to iplement ACS and I want to use CISCO SECURE ACS 3.3 FOR WINDOWS
Hope someone will help

Hi,
This is all what you require:
Supported Operating System
Cisco Secure ACS for Windows Servers 3.3 supports the Windows operating systems listed below. Both the operating system and the service pack must be English-language versions.
Windows 2000 Server, with Service Pack 4 installed
Windows 2000 Advanced Server, with the following conditions:
with Service Pack 4 installed
without features specific to Windows 2000 Advanced Server enabled
Windows Server 2003, Enterprise Edition
Windows Server 2003, Standard Edition
Note The following restrictions apply to support for Microsoft Windows operating systems:
We have not tested and cannot support the multi-processor feature of any supported operating system.
We cannot support Microsoft clustering service on any supported operating system.
Windows 2000 Datacenter Server is not a supported operating system.
Please refer to the following link for more information:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/win33sdt.htm
Thanx & Regards

How to configure Cisco Airespace in Cisco Secure ACS v5.3

Need some help regarding Cisco Airespace configuration in Cisco Secure ACS v5.3. We're migrating to ACS v5.3 but we're encountering an issue with
Cisco Airespace. It is only working on ACS4.1 but when we tried to move it to Cisco Secure ACS v5.3, it is not working.

Ok, we have a legacy Cisco wireless devices called Cisco Airespace and this device is the result of Cisco acquisition of Airespace Wireless Network in 2005. Cisco improve this technology and make it a perfect device for WLAN. Going back to my issue, as I mention we have this device and it is working in our older version of ACS (4.x). Since we have now a latest version of ACS which is 5.3. We wanted to migrate all the device into our latest version of ACS including older version (Airespace). Since this is an older device, I'm thinking that the VSA attributes needs to manually added and create Policy and Access Service specific to Cisco Airespace. I've attached the Dictionaries attributed that I've added and needs some advise if I got the correct value for below item
Airespace-WLAN-Id
Airespace-QoS-Level
Airespace-DSCP
Airespace-802.1p-Tag
Airespace-Interface-Name
Airespace-ACL-Name
Below link is the configuration guide for Cisco Airespace under ACS 4.x
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080891919.shtml

About Cisco secure ACS v3.0

Similar Messages

Maybe you are looking for