About configuration web dynpro abap

we have ecc5.0 and we cant use web dynpro there. can anyone please tell me how can we use web dynpro there? is it related any sap license related issue? please help me about giving me some knowledge about web dynpro installation and use.
From web every user should need one sap id or one common id can be use for login through web.

>please help me about giving me some knowledge about web dynpro installation and use.
There simply is not option to install or configure Web Dynpro ABAP on ECC 5.0 or earlier. Web Dynpro ABAP is part of the SAP_BASIS Software Component. The versions of ECC 5.0 and earlier simply didn't contain Web Dynpro ABAP. It was new in ECC 6.0.
If you want to create Web Dynpro applications, consider building a standalone ABAP or Java Application Server as a separate instance. You can then do Web Dynpro ABAP or Java development on this standalone instance and make RFC and Web Service calls to your older ECC 5.0 system.

Similar Messages

Configuration Web Dynpro ABAP

Hello,
I am new in Web Dynpro ABAP. I want to use Web dynpro :
- first I activate service by transaction SICF
But in the web dynpro explorer (SE80), when I click on the button 'Layout', a following message is displayed 'the page canno't be displayed'.
I don't know how to setup server ? I don't find informations for that ?
Can you help me ?
Thanks

the error is coming because you didn't add the fully qualified domain in the host file.
in the run , enter Drivers
Drivers->etc->hosts
edit the hosts file , add the entry to it. find the ipaddress from your sap logon pad , and domain from the url
execute any standard application you can find the domain name.
10.1.134.59 xxxxxxx.yyyyyy.com

Blank Layout in Web dynpro ABAP

Hi Experts,
We have configured Web dynpro ABAP in our server and activated all relevant services in SICF.
But, we face a problem where layout is invisible and the ouput is appearing when we test the application.
Please provide a solution as the layout is balnk and not giving any error also.

Hi,
You can also have a look at the thread
[blank preview|White preview area in View Designer].
Some SAP notes are mentioned in that thread.
Regards,
Aditya.

Authorization about Web Dynpro ABAP

Dear all:
I have some problem withs the authorization about the web dynpro for abap.Please give me some advices.
For example: In my web dynpro abap,i have two tabs,one is "upload",anthor is "preview".Now there are two users,
in this example ,i assume user A and user B.If user A have the authorization of "Upload",and the user B have "Preview".
Now how can i solve the problem ? If i do not want to use the code to implement it , is there any solution for it ? Thank you ~
Best wishes !

Hi,
There are many ways to achieve this, but without code changes I guess this would be the easiest route:
Create 2 application configurations: one with Upload button Hidden and other with Preview Button Hidden.
Now to run you application you have 2 URL's by vritue of 2 application configurations.
Give the appropriate URL to required set of people.
Learn more about [App Configuration Here|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/af5e19e7-0b01-0010-37af-bc816f9a240c]
Hope this helps.
Regards
Manas Dua

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

I need information about Web dynpro ABAP Exception : ICF Service Node

I need information about Web dynpro ABAP Exception :
ICF Service Node "/sap/bc/webdynpro/sap/abcd/undefined" does not exist.
Here abcd is application name.
ICF Service Node exists and activated but kindly let me know from where "undefined" is coming .
Please let me know your comments /views about this.

Hi,
I think ur webdynpro service is not active after upgradation.
You have manually activate it.
Go go Tcode SICF,Execute the Initial screen,
and in this new screen give service as your application name and click on filter.
You will get your service below which will be ur application name .
right-Click on the deactivate and activate it or just activate it,.
This shd work

Error configuring the Web Dynpro ABAP

Hi,
I am configuring the web dynpro ABAP which is giving an error that is mentioned below when i try to logon to the system.
I have followed the note 1088717 for activating the services for Web Dynpro ABAP in SICF .
i have even followed the note 434918 for configuring the fully qualified host names for BSP.
Please let me know what might be the error.
Error when processing your request
What has happened?
The URL http://cgslsvr3:8020/sap/bc/webdynpro was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: Application // Does Not Exist
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: BASIS -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080401 -t: 144740 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
than you have to add in the hostfile at c/windows/system32/drivers/etc
your mapping with the ip address of the server, add a line like:
XXX.XXX.XXX.XXX servername
but it seems the server is found, so really check in sicf:
/default_host/sap/bc/webdynpro/namespace/application_name
this should be active as well
grtz,
Koen

Question about meta-data of Web Dynpro ABAP / Web Dynpro Java

Hello together,
everywhere I can read, that Web Dynpro meta-data is platform independent.
I´ve read into a book, that the meta-data of Web Dynpro Java is saved as XML and
that Web-Dynpro Java Runtime generates runnable classes and sourcecode out of this...
- What about Web-Dynpro ABAP? Is Meta-code in ABAP is saved in XML too?
- just for theory: is ist possible to take the meta-data of a Web-Dynpro ABAP component and
generate a Web-Dynpro Java Component out of this?
I tried to find it out but i failed... In table WDR_RR_LOAD (is this the right one?) I found only the
field data. But this is a RAWSTRING and I don´t know how to make I "readable".
I must know this for my thesis for my studies, not for work.
Thank you very much !!!!
Greetings,
Oliver

Me again,
I am not sure if I understood it right...
The meta-data which describes the visual part of a view is saved as XML and
would be rendered i.e. in the webbrowser... Right?
What about the meta-data of the Web Dynpro application?
Is this meta-code into an other structure or XML too?
Thank you very much.
Many Greetings,
Oliver

Configuring Web Dynpro for ABAP

SDN,
I have read through the doc's and what I am seeing is that this is the only configuration that must be accomplished for configuring Web Dynpro for ABAP.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm
Please let me if this is correct.
Mike

Yes, this docuementation is correct. You must activate the appropriate nodes in the ICF as well as use the fully qualified domain name in the profile parameter icm/host_name_full. Also make sure that this profile parameter and value is defined in RZ10 as well.
icm/server_port_0 = PROT=HTTP,PORT=80$$
Regards,
Rich Heilman

Is there a way to get Web Dynpro ABAP available in a ECC 5 - NW2004 env?

We will start developing an offline Adobe interactive form with email functionality for ECC 5 on very short terms. We have to decide asap what client/server configuration we will use for this new functionality. We will also develop an online interactive form and an offline form with upload/download functionality for ECC 5. We will have to setup a client/server configuration that supports all 3 scenario's.
The main reason we would like to have NW2004S available for ECC 5 is because we would like to develop the forms in Web Dynpro ABAP instead of Java. Guided Procedures is a "nice to have" too, but not really important at this moment.
At this moment we think we have 3 options:
1. Investigate if we can make an Adobe solution in WDA for ECC 5 with our current setup
2. Upgrade ECC 5 - NW 2004 -> NW 2004S to get WDA functionality available
3. Install ADS for NW 2004 to be able to create Adobe solutions in ECC 5, then we will have to develop in WDJ
1. We have the following configuration up and running: NW2004S - CRM 5 and ADS installed: both Java and ABAP stack work properly. We are wondering if we could develop an Adobe interactive form in Web Dynpro ABAP in CRM 5 using BAPI's to retrieve the data from ECC 5 and put it on the form for display or update purposes. Also we have questions about the email functionality: do forms have to be send by email via a mailserver from ECC 5 via CRM 5 and back or can this be done directly from and to ECC 5 or is it not possible at all? Also we don't know if we can develop an online interactive form for ECC 5 via CRM 5. The current setup is not a real option for us right now as we see far too many uncertainties. Does somebody can give us some answers on the possibilities we are looking for?
2. My assumption is that upgrading ECC5 to ECC6 can be compared with upgrading 46C to ECC5. If my assumption is correct, this would mean an upgrade project with a 6 months leadtime within our company. If my assumption is wrong, please let me know. This upgrade will happen some day, but it has not been planned for 2007. So unfortunately, for us this is not an option at the moment because we cannot wait that long. I was hoping an upgrade of NW2004 -> NW2004s was not that time consuming but I guess this can be compared with a SAP upgrade project like 46C -> ECC 5.
3. Installing Adobe Document Services for NW2004 is not our preferred solution but we think it is the safest/easiest solution at this moment to get started with Adobe interactive forms for ECC 5 on short terms. We will have to develop in Web Dynpro for Java, so be it.
WDA is not a must but if we can find a client/server setup which gives us the possibility to build in WDA for ECC 5 functionality, that would be great. That's why I dropped the question on SDN. I want to be sure we choose the best option possible at this moment for us.
kind regards
Angelique

Yesterday I got new information through SDN which sounds very interesting:
There are technical repository integration points between ECC and the underlying SAP NetWeaver release. To get Web Dynpro for ABAP, you could install a stand-alone SAP NetWeaver 2004s system (without ERP) side-by-side.
Somebody else wrote: we set up a 3-system landscape of NW04s and have configured single sign on and trusted RFC's so that users can hit the webdynpro pages via the portal, and those systems make the necessary queries to the backend systems via RFC.
Does somebody know if this stand-alone system could be a proper solution for our situation? Does somebody foresee any problems related to Adobe LiveCycleDesigner or ADS?

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Web Dynpro ABAP application's link in UWL.

Hi Experts,
                 As per my project requirement i need to send the web dynpro abap application's link for another SAP user by using UWL concept.
My requirements are :
         After triggering the workflow i am getting the tasks inside my SAP inbox ( in SBWP tcode ).But those tasks are not appearing in Portal UWL.
         (ii) After triggering the workflow how to send the link of web dynpro application to portal UWL.
Please help me !
Thanks & Regards,
Gowtham.A

Hi Gowtham.A,
Did you set up the system object in the System Landscape Directory on the portal? Then did you configure the webflow connector in the UWL Administration?
Please see the following help documentation:
For the setup in the Universal Worklist you will need the following:
http://help.sap.com/saphelp_nw70/helpdata/EN/e5/fc550f79ed4131a63c540cddbfe7be/content.htm
You will need this for the Abap Webdynpro Action Handlers setup...ensure you read the area about SWFVISU setup:
http://help.sap.com/saphelp_nw70/helpdata/EN/19/bff5c18ba44da4a4ca68cf572dabda/content.htm
Best Regards,
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

SRM 7.0 Web Dynpro ABAP Customization

Hi ,
Upgrading from SRM 5.0 to SRM 7.0 and would require customization at the Web Dynpro ABAP Component for RFx.
I need to put a pop-up screen when the Buyer clicks on the "AWARD" button on the Bid Screen. Now I am not able to find the award action/event at the Web Dynpro component level where I have to put the pop-up code and other related logic. I also tried getting into the SPRO and find the class which may contain the AWARD event. Please let me know the solution to this problem. Thank you.
Manoj

Hi Akash,
Thanks for the reply. Can you please guide me through how to go about the enhancement, keeping the original functionality of the Award Button intact. And I understand coding in method of interface is not possible.
Manoj
Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:33 PM
Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:35 PM

Integrating Flex/Flash in Web Dynpro ABAP(Netweaver 7.0) need info!

Hi all,
I need to embed a flash or a flex object inside a web dynpro abap application.I am working in Netweaver 7.0 and i don't have enhancement pack 1 installed.Is it possible ? If it is possible can anyone please provide me the coding and configuration details.
Thanks,
Saikat

I'm afraid that the SAP supplied integration technology - call FlashIslands - is only available from NetWeaver 7.01 and forward. You could perhaps do some simple integration (very little data transfer) with the iFrame UI element - although the iFrame is deprecated in 7.0 and 7.01, but does return to full support in 7.02. The other option would be to use the NetWeaver Portal or NetWeaver Business Client and have two iViews within the page. One iView would have WDA and the other some external technology (BSP, JSP, etc) to host the Flash/Flex content. Not tight integration, but you could potentially use Portal Eventing to at least communicate events.

How can I call a java object from Web dynpro ABAP application?

I made Web dynpro ABAP application and posted it to SAP EP.
For certain business purpose, we need to call external 3rd party java object using 3rd party's java api in Web dynpro application.
Is there anybody who experienced this kind of java interface issue?
I know Web dynpro Java environment can fully support this kind of requirement. but regarding Web dynpro ABAP, I couldn't find any clue for this.
Any comment or suggestion would be greatly appreciated.
Thanks,
Raymond, ABAP Consultant

if you have jco configured, then you can make calls to java api from ABAP .
check out this weblog.
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Raja

About configuration web dynpro abap

Similar Messages

Maybe you are looking for