About Connect by clause plz help

Hello,
I'm supposed to use connectby clause, and i'm not getting clear idea abt it. can any one help me...
regards
pavani

Pls check the following link
http://www.oracle.com/technology/oramag/oracle/05-may/o35asktom.html
Cheers

Similar Messages

  • Did all the resets and still wifi connects and disconnects , plz help

    did all the resets and still wifi connects and disconnects , plz help

    I upgraded Apple TV late last week. Last weekend I rented a couple of movies from Apple TV. I watched one immediately, and was going to watch the other one the next day. On Sunday I opened up Apple TV to watch the film, and..... NOTHING THERE. I could see 'purchased movies', 'top movies', etc., at the top of the bar, but no mention of rentals. Even the film I'd watched (which obviously you can see for 48 hours) had disappeared into a black hole in Apple TV. I have been charged for these movie, and sent in a complaint.
    My airplay seemed to be fine, but.... last night, my computer was not seeing an Apple TV or showing an airplay sing, so I restarted and the Apple TV and airplay sign returned. If I chose to watch the film on the computer it started up immediately, if I chose airplay, I got the first image of the film and the loading sign going on and on (round and round) forever. The film never started. I restarted my Apple TV, the same. I restarted the computer, the same. I tried with various programmes and no go.
    iMore has the following suggestion. I am not sure if this will help. It sounds a PIA, but if I can't get airplay to work, I might try it: http://www.imore.com/how-restore-2nd-or-3rd-generation-apple-tv-back-factory-set tings-itunes

  • Problem in Connection Polling? Plz Help Me

    This is the Error i got.....
    weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Oracle JDBC Driver]Error establishing socket. Connection timed out: connect
    My application is runing Fine when small numer of users & less Database Connection Objects used.
    When more user it gives THIS Error.
    i increased the Connection poll Size But Again it gives the same error.....
    yesterday my server(Linux) was Hanged(problem with RAM) . Today
    we changed the RAM and its working fine. But the connection Polling is the current Problem.
    test Connection is Working Fine. But more Connection its not Working,
    giving this error...
    weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Oracle JDBC Driver]Error establishing socket. Connection timed out: connect
    Plz help Me.....
    regards
    raghavan

    You can use like this:
    Order By
       Depot_Code,
       Bl_No nulls first ,
       Booking_No

  • TS3297 I forgot my security questions what do I do about this?? Plz help

    I forgot my security questions what do I do about this?? Plz help

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • Shuffle wont connect to computer - plz help!

    i have had my ipod shuffle for only 3 months. i have updated it to the latest ipod software, and have the latest version of itunes. when i try to upload new songs onto my shuffle, the shuffle doesnt stay connected long enough for the songs to start uploading. the shuffle continuously connects and disconnects itself, even though the whole time it is connected to the computer. i have also restored it to factory settings. plz help!

    maybe its your USB port !!!
    try another one

  • I Want to connect to database . plz help

    dear programmers
    i use forms9i and oracle database 9i under winxp. the database is on the local machine .
    to connect database from the form i do the following:
    1-choose file | connect from the main menue
    2-type scott/tiger then click on connect
    the following message appear
    ORA-12560 TNS :protocol adapter error.
    please i urgently need to connect to database
    please help

    dear Pamela Gamer
    I really thank u for helping me .
    I did the following :
    1- from Start menu,I select Programs > Oracle9i Developer Suite > Forms Developer > Start OC4J Instance. I waited till the window displays a message that OC4J has been initialized, and I minimized the window,and i did not close it.
    2-I opened my form and connected my database successfuly.
    3- when i started to run my form the same message appeared ( frm-10142: the http listener is not running on 127.0.0.1 at port 8888 . please start the listener or check your runtime perference)
    i do not know why it appeared again .i want to know what is the problem . in fact i hardly need to shift to forms9i, but this problem makes me disapointed.
    if you know the solution , please help me
    thank u again for helping me
    tarek

  • HI, Unable to connect Visual administrator plz help me to this issue.

    Installed SAP XI System every thing is fine except visual administrator,i am getting following error,
    unable to lookup connection default.
    http://sap:8101/msgserver/text/logon returned list of connection parameters

    Hi-
    You can use the template installer to do the post installtion for XI
    To start Visual administrator execute the go.bat file.
    You can find this file in j2ee admin folder.
    J2ee+ ABAP Engine
    C:\usr\sap\<SAPSID>\DVEBMGS<xx>\j2ee\admin\go.bat
    J2EE Engine
    C:\usr\sap\<SAPSID>\JC<xx>\j2ee\admin\go.bat
    So here you can log on to Your Visual Administrator.
    Check out this link its helpful
    http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm

  • Can't get AE clients to connect to internet-Plz help me!

    I've had a home with router, wired mac's and pc's, and apple laptops for years with no problems. I removed old router and installed AE base station. I can connect to the Base Station via internet and wireless, but can't get past it to the net. I'm out of ideas.
    My DSL modem from Sprint is a Prestige 660ME-61, with an address of 192.168.2.1. My "test" G5 desktop has an IP address of 192.168.1.23, subnet 255.255.255.0 and Router ip of 192.168.1.254 - as shown in system pref/network/built in ethernet configuration. This works fine with old pbx/router. I tried looking at my PBX/router settings and they use different terminology.
    The AE auto setup didn't work, and I noticed it had set an ip address of 10.0.1.1 for the Base Station. I changed that to 192.168.1.x in the manual setup mode of DHCP. That generated starting and ending addresses of 192.168.1.2 to 192.168.1.200. On the Internet Connection tab, it shows IP address of 192.168.2.2, Router address of 192.168.2.254, and the DNS address from Sprint. With these paramters, I get something like "no connection to the internet" when I try to connect.
    It seemed to me that I should set the router to be on the same 192.168.1.x addresses that DHCP is handing out, but when I try to change the Rounter Address to 192.168.1.254, I get a message saying that rounter address is not compatible with the lan address..
    I'v worked with computers and networking for a long, long time, but I am at wits end - maybe it was the chemo! I would very much appreciate some very smart person telling me which simple setting to change to make it work! And yes, the DSL modem is plugged into the WAN port on the AE. Some of you might wonder how I'm sending this. The answer is I went back to my pre-AE configuration.
    Thanks in advance!
    Randy

    Did you happen to allow enough time for a power recycle when switching the router connected to your DSL modem?
    Modem/Router Power ReCycling
    - Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the DSL/Cable modem; Wait at least 30 minutes.
    - Power-on the Internet Router; Wait at least 5 minutes.
    - Power-on the computer(s)

  • I m havin problem wid my phones sound.its only working while connected to headphones.plz help.

    My 5s is 5 months old nd its showing sum not anticipated problems,it sumtyms restart itself nd nw its sound isnt workin widout connecting phone to earphones.what shud i do??

    Put your phone on the radiator for A little bit. A warning will pop up if it's gonna over heat. Worked for me.

  • What do i do when my iphone 5  says ''iphone is disabled'' connect to itunes. plz help

    i need help

    what do i do when my iphone 5  says ''iphone is disabled'' connect to itunes.
    Have you connnected it to iTunes as it tells you to do?

  • I have install wamp server one my first laptop and and i access data with my second laptop. i have connected both pc's with internet wire but it show some error"enable to connect mysql server " plz help me

    string wire = " Persist Security Info=False; server=xain; port=3307; database=test;username=root;password=";
    string query = "insert into test.server_base values('" + textBox1.Text + "', '" + textBox2.Text + "')";
    MySqlConnection condatabase = new MySqlConnection(wire);
    MySqlCommand cmd = new MySqlCommand(query, condatabase);
    MySqlDataReader myreader;
    try
    condatabase.Open();
    myreader = cmd.ExecuteReader();
    MessageBox.Show("Good");
    condatabase.Close();
    catch (Exception xe)
    MessageBox.Show(xe.Message,"na g na");
    /*server=xain is a server name assing in which database is install */

    Hi sohail.
    As you title mentioned wamp server, for WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. This is third-party software. I
    am afraid this is out of our support.  I would suggest you to ask in their
    official forum. Thanks for your understanding.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why wont my ipod connect to itunes plz help

    i need help

    http://support.apple.com/kb/TS3716
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I created an iCloud account and also had to get more space after I have done the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help

    I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S

    This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail.  To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup.  Then go back and turn iCloud Backup back on and try backing up again.
    If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up.  Also be sure to transfer your purchases (File>Devices>Transfer Purchases).  Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone.  This will be much faster than using iCloud anyway.

  • My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

  • Plz help! my ipod no longer gets charged when connected to my computer

    as the topic suggests, my ipod with video(5.5G) always shows that its fully charged when connected to my computer. but it wasn't like this a period of time ago, i wonder why. plz help me. i now dare not to transport more than 1g files to my ipod in case it would run out of battery and sth worse may follow...
    since my computer is old with a celeronA 533(overclocked to 760, not a big difference), i closed lots of the system services which i think are useless, maybe that's the problem? but which service should i start? ipodservice.exe is always running when i connect my ipod with my pc
    btw, i must say sorry with my poor english, hope you understand what i mean

    If you mean that when plugged in it shows the iPod being fully charged but when you disconnect the battery is actually dead, then you probably have a defective battery.
    Patrick

Maybe you are looking for