About Create Asset Master Record

hi expert,
when use the tcode as01 to create an asset master record.
there is a location filed and the location relative to an address number .
my concerns that how can we maitian the address number or do we just pick
one from the table adrc?
thanks in advance

Hi,
Check whether the asset class is locked in for your depreciation area in T Code AM05. If so, remove the lock.
Regards,
A.Saravanan.

Similar Messages

Error in Asset Master record creation

I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
I have filled all account determination, screenlayout, etc.
When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
Error shown is:
Chart of depreciation IN00 that was determined is not entered for asset class 3001.
_How to rectify the problem ?_
Help with Tcode or menu path.
Further to rectify,
I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)

I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)
Solution given is:
In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
1. Defined at least two active charts of depreciation
2. Assigned asset class 1001 to more than one chart of depreciation
However, at the moment this asset class is only assigned to chart of depreciation 1.
I m unable to understand the solution
Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM

Business area default in asset master record

Dear all
Here is one ticket pertains to asset
when i create asset master record business area will be defaulted
the problem is when i upload asset master record through LSMW
by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
This is happening for all the asset classes
so i want to remove that default business area from where should i remove that which t-code or menu path
regards ravindra kumar

Dear ravinagh
removing of business area in asset master record is always possible but
see when u r uploading bulk asset master records through LSMW we cant replace the business area as it is already defaulted in asset master record
means some where we have assigned the default values to the asset classes or some other master record
so we have to find out the source of the defualt business area for asset master record
when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
so please try to find out the source....................
regards
ravindra kumar

Time interval in Asset master record.

Hi All,
I am creating asset master record using AS01. Then I am doing intercompany transfer of asset via T Code ABT1N.
If I view the asset time dependant data after this I am getting the following:
1. The time interval mentioned is 01.01.1900 till 31.08.2007.
2. When I add the furthur time interval I am getting the ABAP dump.
Please help on this.

Hi,
When you look in the dump you see on the begin somwere of the dump
> here you see the reason for the dump, perhaps there is field what can help you to solve the problem.
You can have a look with the programmer and or create a message to SAP support.
Paul

Asset Master Record - Time Dependent tab - locations to be created

Hi Guru's
Hot to create the new locations in the Asset Master Record - time dependent tab.
Some locations descriptions I need to change.
Please help me.
Regards
Jenny Connes

Hi,
change your location description at following SPRO location:
SPRO->Enterprise Structure -> Definition->Logistic - General ->Define Location
Thanks,
Dharmesh

Low Value Assets master records

I need to have a solution for my issue.
We want to manage certain assets which are having minor value and the same needs to be depreciated in the same year.
For this purpose, I am thinking about the Low Value Assets functionality. When I go through the help, I find that :
"In contrast to fixed assets of greater value, low value assets (LVAs) are completely depreciated in the year in which they are acquired. Therefore, you do not usually need an individual assessment of their values. Since they individually have little value, they are often managed collectively as a single asset master record.."
It says we need to have only one single asset master record. My doubt is then how we can represent different assets ? viz. I have one calculator, briefcase, mobile phone, buzzer clock, paper cutter, etc. How can I represent each of these in the Low Value Asset single master record ?

Hey,
Most of the companies create separate assets for LVA. When help says create one asset, they keep in mind that we
want to 100% complaint and have all assets in SAP and so we create assets for value at even min. In countires like US
any amount less than $500 can be writen-off. Large number of assets mean high performance. Hence they say one asset for LVA. You can ignore this statement at help and create separate assets for LVA.
Hope this helps you.
Regards
harikishan Kolli (Kishan)

Equipment master record updation in Asset master record

Dear Friends,
I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
Thanks,
Dwarak.

Hi,
Thanks a lot for your reply.
I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
Thanks
Dwarak.

Insurance view disappear in Asset Master record

Hello,
I can not see The insurance View while creating/changing or displaying Asset master record.
What can be the resons ?
I checked the customizing (Define Screen Layout for Asset Master Data) but the insurance view are alreeady defined as " Optional ".
What can i check also ?
Thanks

Dear,
Tarek.
Please go to T.code ANSICHT and look for the respective that No Authorization Radio Button is not selected. I think this may be the problem in your case, it is selected. I hope this helps you.
ANSICHT manages the asset views with the option of Master Data & Depreciation Areas.
If you need any clarification. Please revert back. I hope this may solve your problem.
Regards,
Pankaj A Bhalerao.

CostCenter in Asset Master Record

Hello Gurus,
Our client is using Location field in the asset master record for property tax filing.
So it is required field in asset master record.This location field is same as cost center field,means the data is entered in the cost center has to be entered in Location field also for reporting purpose.So everytime when a new cost center is defined there is a need to define new location also from FA side.My question is ,Is there anyway that when a cost center is created that this can get added into location table? Or, can this table be updated without it being configuration?
Please advise me.All your thoughts are greatly appreciated.
Thanks,
Geeta.

hi,
is this field TXJCD or STORT from table ANLZ ?
you must put a validation or modification in exit COOMKS02 or
COOMKS03 (tcode SMOD)
-> from here you can create an entry in cu-table T499S resp. TTXJ
regards Andreas
Message was edited by:
Andreas Mann

Flow of Data to Asset Master Record

Hi,
I created a Asset Master record. In 'Origin' Tab in asset master record, there is a space for writing Vendor NAme, MAnufacturer, Acquisition Year, Original Value, etc.
After i create Purchase Order or acquire asset through F-92, i noticed that vendor name, value, etc does not flow to the Asset Master Record.
Please let me now how the data will flow to asset master record ?
Am i missing any entry

Dear Deepak,
please check the Tcode AW01N , this for asset explorer.
In this screen if you select Purchase Order in Object related to Asset tab from the left side of the screen , you will get all vendor details for particular asset.
You can able to see the Migo details also......
If you have any doubt plz let us know.......
Regards,
Pavan.

Group box in asset master record's tab overlap each other

Hi Gurus,
I was wondering anyone has seen the same issue that I'm experiencing. I'm on EHP6 and have logged the issue with SAP but wondering if you've faced the same problem.
I basically designed a new tab layout with 2 tabs and assigned the following group box to the 1st tab
S0001     General
S0003     Time-Dependent Data
S0002     Posting Information
S0013     Equipment
to the 2nd tab I only assigned
S0009     Origin
S0100     Depreciation Areas
Then I assigned the new tab to the asset class.
Now when I create the asset through AS01, the tab and group boxes appear however the time-dependent group box overlaps with posting information (please see below). Have you experienced the same issue in your environment?
Thank you.

Dear Minab,
This is definitively the problem of overlapping of the layouts.
The asset master data transactions AS01, AS02 and AS03 uses a generic tool to define the screen layout. Unfortunately there are some restrictions on that tool which are based on basis functionality.
The problem is caused by compression and resizing (note 203023)
Since Release Enterprise there are more fields on that screen in Release Enterprise than before.
Hence, the problem is caused by the definition of your asset layout the solution in your case could be to move the screen to an own subscreen or to move this screen to the end of the tab.
Please go the customizing (transaction SPRO) and follow these steps:
   Financial Accounting -> Asset Accounting -> Master Data -> Screen
   Layout -> Specify Tab Layout for Asset Master Record -> Define Tab
   Layout for Asset Master Data
Select in your layout the relevant tab page.
Here you may need to change positions and group boxes around. Unfortunately there's no other solution possible due to technical restrictions.
best regards Bernhard

Using the same Asset Master Record for similar assets

Dear all,
I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged according to the useful life of the individual assets posted to the same master record and which in turn will vary according to periods / fiscal year posted.
For example, an asset master record is created for Vehicles. The 1st vehicle with a useful life of 4 years is depreciated at the start of the year for 4 years. The second vehicle is purchased on 6 months after on the 1st June using the same asset master record. However the depreciation is not worked out over the same useful life of the previous vehicle but is extended for a further 6 periods. Is this possible and how is it done.
Many thanks for any feedback and help.
Thanks
PRG

Dear Peter
What is the issue in case you created separate Asset Master for each Vehcile ? Is there any specific need for you to accommodate all the assets in one single asset master ?
I don't think it is correct method as per Company's Act. Over and above, how would you plan for the Fixed Assets Register in the given situation ?
Regards
Gemini

EQUIPMENT ASSIGNMENT TO ASSET MASTER RECORD

Hi All:
I am trying to assign the Equipment Number in the Asset Master Record but am not able to do so. Is it even possible, has anyone had any success with the configurations and can share them with me?
I know that I can create the Equipment Number automatically when creating the Asset Master but what I need to do is to assign an existing Equipment Number to an existing or new Asset Master & the asset number will be reflected on the Equipment Master.
Thanks and Regards
Hisham

What is the problem now? Aren't you able to assign the Equipment number in the Asset master data?
What is the error message?
Well, just try this and see whether it works for you or not.
IMG -> Asset Accounting -> Master Data -> Automatic Creation of Equipment Master Records -> Specify Conditions for Synchronization of Master Data

Change Of Asset Master Record?

For one of my client, they had created couple of asset master records and posted the depriciation for 6 months.Now auditors suggested they wanted to move this asset master record to another master.already they had posted depriciation also. auditors suggested you are not supposed to show this asset master record conver this asset class. how we want to rectify this?
Regards
K.srinivasrao

Dear sree.kancharla
Were you properly maintained period control (in AFAMP) here you can Acq. Add, Retirement , Trnasfer. you can maintain (like that, 01/06/06/06
Regards
shankar

Change/ Add screen in Group Box specify tab layout for Asset master Record

Hi All,
I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
Thanks & Regards,
Pankaj

Hi,
Try at below path:
Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
here you can change the layout for the same.
Kind Regards,
Mehul

About Create Asset Master Record

Similar Messages

Maybe you are looking for