About creating 'Job created by'-report for multiple user's jobs [sm37c]

hi,
Done some searching for the problem in my SM37C-query  with no luck...
In SM37c there is a User name-field for filtering query for  "User name"-user's jobs. I'm aware that I can use asterisk '*' here but my need is more generic. I would need to filter my query to certain group of users that interest me.
Q: Can I define a filter (or group) in SM37c that I could get listed only predefined user's jobs? If not, any other transaction or workaround thjat would work here?
thanks,
ari

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your question to get quick assistance.
Please close this thread by marking helpful answer.
Thanks & Regards,
Nagarajan

Similar Messages

  • How can I create a folders of apps for multiple users?

    I use several iPads with my students and would like to set up a folder for each student. I want to place "an alias" of each app the student uses in their folder. On my Mac, I can "make alias" and place aliases in seperate folders. How can I do that on my iPad? Thanks!

    You can drag one app on top of another and make a folder. However the limit to this is, for your situation, there can be no sharing of apps....the app Fred can only be in one folder because it's only on the device once.  (so it may not work for what you need)
    and I cannot recall if you can edit the name of the folder.
    Unfortunately, for situations like yours, the iPad was created to be a single user device, so there's really not support for multiple users or multiple levels of access.

  • Creating a custom cache location for multiple users

    If I use the browser.cache.disk.parent_directory method (http://kb.mozillazine.org/Browser.cache.disk.parent_directory) to set up a specific folder for the cache:
    Are there advantages to specifying a different (sub)folder for each of the users on my computer, or will Firefox handle things automatically just as well?

    Note that only one user can use a specific profile at the time, so if there is any chance that two or more users are active at the same time then you need separate profile folders and separate cache folders for each user.
    Note that you can also set prefs via a mozilla.cfg auto configuration file.<br />
    Such a configuration file can contain JavaScript, so you can detect the user profile (ProfD) and environment variables.
    See:
    *http://kb.mozillazine.org/Locking_preferences
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes

  • GRC 10: Initial password for multiple users creation in a ARQ request???

    Hi All,
    I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
    The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
    May I know how to set the initial password for multiple users?
    Regards,
    faisal

    Vit,
    I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
    1. User Name
    2. User Id
    3. Email
    I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
    "Last name is not mentioned for user id XXX"
    But there is not such column in provided template by GRC!
    I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
    Following are the only columns shown:
    1. User Name
    2. User Id
    3. Email
    4. Manager
    Out of above, only "Manager" field is editable and others are disabled.
    Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
    Any idea you have why am I getting such incomplete template?
    Regards,
    faisal

  • Can we creat an Apple ID for multiple users?

    I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
    It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
    Maybe it's possible to create an Apple ID for multiple users???
    Thanks!

    iPad in Business and Education
    You may find a better answer in this part of the forum, since it's meant for situations like you're in.
    http://www.apple.com/support/appleid/
    is also info about apple ID's.
    You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment.

  • Create a site utilization report for SharePoint Site with these conditions

    HI,
    How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
    a) The list of users who are accessing the site
    b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
    c) When was the last date the user has accessed the site

    Hi Kalpana,
    Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
    You can get site collection / sub site user details via
    SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
    Let us know if this helps
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • Creating a customized Historical Report for Abandon Calls

    Hello
    I have a specific question about generating a customized report for a user.  She wants to know the abandonment rate minus the calls that drop off in 10 seconds.  I don't use historical reports so I'm not too sure how to do this.  I looked at the canned reports but it doesn't look like none of those works.
    Can this be done?
    Mark

    Hi Mark
    Here's a couple of suggestions:
    1) You can try the 'Contact Service Queue (by Interval)' report. This has a stat on it called 'Percentage of Service Level Met— Without Abandon'. The description of this is:
    Percentage of presented calls, not counting abandoned calls, handled within the time shown in the Service Level field. This value is calculated as follows:(Number of calls handled within service level / (Number of calls presented – Number of calls abandoned within service level) * 100%
    So to get this working the SLA on your queues would need to be set to 10 seconds, and presumably 100% of calls to be answered at 10 seconds.
    Be aware that the SLA calc is done when the call happens, so if you don't already have those settings it will apply to calls from the time you make the change.
    2) As per Anthony's suggestion, and custom report is the other option. It's a matter of developing SQL code and a Crystal template, and some XML for UCCX HRC - so unless those are things you are familiar with it's not trivial. Maybe PM me if you want it doing for you.
    Regards
    Aaron

  • Job not getting triggered for Multiple Scheduler Events

    hi,
    I would like a job to be triggered for multiple scheduler events, subscribing to a single event works fine. But, when I set multiple event condition, nothing works.
    My objective is to run a job, whenever job starts or restarts or exceeds max run duration.
    Note : Is it possible to trigger a job, when a job RESTARTS by subscribing to JOB_START ????????
    procedure sniffer_proc(p_message in sys.scheduler$_event_info)
    is
    --Code
    end sniffer_proc
    dbms_scheduler.create_program(program_name => 'PROG',
    program_action => 'sniffer_proc',
    program_type => 'stored_procedure',
    number_of_arguments => 1,
    enabled => false);
    -- Define the meta data on scheduler event to be passed.
    dbms_scheduler.define_metadata_argument('PROG',
    'event_message',1);
    dbms_scheduler.enable('PROG');
    dbms_scheduler.create_job
    ('JOB',
    program_name => 'PROG',
    * event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
    *' or tab.user_data.event_type = ''JOB_START''',*
    queue_spec => 'sys.scheduler$_event_queue,auagent',
    enabled => true);
    I tried this too...
    dbms_scheduler.create_job
    ('JOB',
    program_name => 'PROG',
    * event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
    *' and tab.user_data.event_type = ''JOB_START''',*
    queue_spec => 'sys.scheduler$_event_queue,auagent',
    enabled => true);
    Need help
    Thanks...
    Edited by: user602200 on Dec 28, 2009 3:00 AM
    Edited by: user602200 on Dec 28, 2009 3:03 AM

    Hi,
    Here is complete code which I tested on 10.2.0.4 which shows a second job that runs after a first job starts and also when it has exceeded its max run duration. It doesn't have the condition but just runs on every event raised, but the job only raises the 2 events.
    Hope this helps,
    Ravi.
    -- run a job when another starts and exceeds its max_run_duration
    set pagesize 200
    -- create a user just for this test
    drop user test_user cascade;
    grant connect, create job, create session, resource,
      create table to test_user identified by test_user ;
    connect test_user/test_user
    -- create a table for output
    create table job_output (log_date timestamp with time zone,
            output varchar2(4000));
    -- add an event queue subscriber for this user's messages
    exec dbms_scheduler.add_event_queue_subscriber('myagent')
    -- create the first job and have it raise an event whenever it completes
    -- (succeeds, fails or stops)
    begin
    dbms_scheduler.create_job
       ( 'first_job', job_action =>
         'insert into job_output values(systimestamp, ''first job runs'');'||
         'commit; dbms_lock.sleep(70);',
        job_type => 'plsql_block',
        enabled => false, repeat_interval=>'freq=secondly;interval=90' ) ;
    dbms_scheduler.set_attribute ( 'first_job' , 'max_runs' , 2);
    dbms_scheduler.set_attribute
        ( 'first_job' , 'raise_events' , dbms_scheduler.job_started);
    dbms_scheduler.set_attribute ( 'first_job' , 'max_run_duration' ,
        interval '60' second);
    end;
    -- create a simple second job that runs when the first starts and after
    -- it has exceeded its max_run_duration
    begin
      dbms_scheduler.create_job('second_job',
                                job_type=>'plsql_block',
                                job_action=>
        'insert into job_output values(systimestamp, ''second job runs'');',
                                event_condition =>
       'tab.user_data.object_name = ''FIRST_JOB''',
                                queue_spec =>'sys.scheduler$_event_queue,myagent',
                                enabled=>true);
    end;
    -- this allows multiple simultaneous runs of the second job on 11g and up
    begin
      $IF DBMS_DB_VERSION.VER_LE_10 $THEN
        null;
      $ELSE
        dbms_scheduler.set_attribute('second_job', 'parallel_instances',true);
      $END
    end;
    -- enable the first job so it starts running
    exec dbms_scheduler.enable('first_job')
    -- wait until the first job has run twice
    exec dbms_lock.sleep(180)
    select * from job_output;

  • How to schedule one report for multiple company code?

    How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
    points are given for ASAP replies.
    Thanks in advance
    Peter

    Dear Peter,
    Try to restrict the Company Code with  those 20 values and schedule.
    Regards,
    Ramkumar.

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • How to Block Account member in input reporting for some users?

    Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
    I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
    I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
    For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
    I hope understand the question, im sorry about my english
    thank you in advance
    Ignacio Vazquez

    I would think you could do one of the following:
    Either set account as a secured dimension.  You would then define security profiles for all account groups and assign those to your users / teams as appropriate.  Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
    Setup different input templates that only showed the accounts you wanted each group of users to see.  Put the templates in different site folders and assign access to those sites as required.  users would then only have access to open the template applicable to them.  Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
    Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts.  I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc.  You then distribute the passwords to the users as appropriate.
    Hope that helps.

  • SESSION VARIABLES : HOW TO TEST FOR MULTIPLE USERS

    I have a username session variable set up on a localhost testing envirnoment.
    This works fine for one user, but when I open another occurence of the browser (or just another tab) to test for multiple users the system overwrites the session variable with the last username input.
    So the question is:
             Why doesn't dreamweaver hold an instance of the session variable for each browser session? and if not what are your suggestions?
    Thanks
    Adam.

    Thanks for that.
    After scouring the internet I found the only way of running 2 instances of firefox  without them sharing the session variables is to create 2 new firefox profiles in windows + set the MOZ_NO_REMOTE environment variable.
    Internet explorer is much easier as it has a 'new session' option in the file menu, but seems to have more trouble displaying tables correctly.
    Hope this helps anyone with a similar problem.

  • WebStart Single Install for multiple users

    Has anyone figured out how to solve the problem of having to install the software for multiple users now?
    With recent versions of the Sun WebStart, the cache directory has changed to the user's personal directory.
    It used to be that the cache directory was a common shared directory off the C: drive.
    For the software we have developed, it was great to install once as the admin, download the files so that they are cached, and then copy the links to the all users desktop which pointed at that shared location.
    Now there appears to be no way to do this. We've looked to find the default cache location to change it, but there is no way to specify this (that we've found).
    I know I can change each user's cache directory to point to a common location, but it means signing on as each user and making this change manually which takes a considerable more time than it did before. Java WebStart was the EASY way to install the software before (and did not require a browser). Now it is harder than just using a browser with the plugin. We'd like to get the browser out of the picture though still.
    I can see how this feature could benifit individual users who only want their own programs to show up , but we really need to make it work like before for ease of use. With the number of users we are dealing with, it would be very difficult to tell them to click on a link to install the program but only do that the first time, then start using the new link that is created by the program.
    Any suggestions from anyone?

    Sorry, I just realized this is in the wrong forum.
    I'll go post it in a more correct forum instead.

  • Change Reference Attribute - "Manager" for multiple users

    Hi,
    I have a scenario in which I have to create a workflow to change a reference value attribute - "Manager" for multiple users in one go. Is it possible to achieve this with workflow. If yes, then how?
    Regards,
    Manuj Khurana

    Hello,
    not out of the box, since in workflows and custom activities you can only access the reqestor and target object direcly.
    But you can develop your own custom activity that fits you need, or do it with powershell custom activity.
    I did a very similar thing, to be able to change users group membership from the user UI, so I have also edit objects other then requestor and target in a workflow.
    Since both (manager and member) are reference attributes you maybe find this article helpful:
    http://social.technet.microsoft.com/wiki/contents/articles/19615.fim-2010-r2-how-to-manage-group-membership-from-the-user-ui.aspx
    I used this powershell activity in my solution:
    http://fimpowershellwf.codeplex.com/
    Regards
    Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • Design forms for multiple users

    Dear sir
    I am developing new application for my company.I don't know how to desing the the tables for multiple users and how to give rights to users to access certain forms.This application will use in two differnet languages.
    how to switch one language to other languages
    give me some ideas
    thanks
    Dev

    ...how to desing the the tables for multiple users and how to give rights to users to access certain forms.
    There are several ways to do this. One way is to create different database accounts for each user, and give each user priviledges to the tables they need. (Your DBA may need to do this.) Then, when the users logs in, check who it is and call the appropriate form.
    how to switch one language to other languages
    This is a common question. See Experts Experience Required: Direction In 10g or search the forum for additional help.

Maybe you are looking for