About CS4 vs CS5 - a request for information

First my setup:
Sager laptop NP8760
CORE i7 820QM @ 1.73Ghz (both cores)
ATI MR HD 5870 (1 GB)
Ram: 8192MB DDR3 1333 (2 DIMMS)
2 SATA 500GB WD hdd
Win 7 64bit
What I want to hear about, is given the hardware and that its 64 bit win 7... How different will I find CS5 encore to be.
I've been working with CS4 on the same hardware for about a month.
It sounds like CS5 Premier has a significant change with the new rendering engine, but what about Encore? Has it aquired some new and better way to grind avi into mpeg2?
My usage is as an event videographer still in the learning phase in all respects.  Although I have finally developed some familiarity with the Adobe CS4 Production set.  And have been an off and on user of Photoshop, premiere, encore and Illustrator going back to the version where CS had no number following it.
Its really hard to tell from the online descriptions that adobe has posted, although it appears they have put a good effort into trying to describe what to expect.  It isn't enough for me to understand what I might find better or worthwhile about CS5.

John T Smith wrote:
64bit (required for PPro CS5) means better use of more memory
Your ATI graphics card does not allow hardware MPE in PPro
Encore is still 32bit, since the "core" is licensed from Roxio, and they are still 32bit
You might want to check http://ppbm5.com/ to see if there are any laptops like yours, and where they rank
MPE ?... is that hardware acceleration?
And what is the end result of not allowing MPE?
I couldn't make much sense of the tightly woven pages at you citation... looked like it make take some serious pondering just to get started with that
My laptop had 2 choices of vid card... the other one was `Nvidia Quadro FX 2800M 1gb Gddr3'  I didn't know enough about how to read the specs to make an informed choice... but shy'd away from Nvidia due to experineces on a P4 running winXP -pro where I reall couldn't even run encore CS4 without major problems... begining with having to turn hardware excelloration off.
Would that card make a serious difference in working with PP and Encore?

Similar Messages

  • Notification Timeout when Requested for Information

    Hi,
    We have implemented a approval notification for our customer which on a high level is as follows
    requester -> Approver 1-> Approver 2
    Once a request is submitted, the 'approval' notification goes to Approver 1 followed by Approver 2. The request is approved when both approves approve the request. If no action is taken by the approvers, the original notifications are cancelled and escalation notification is sent to supervisor of approver 2.
    We have a timeout of 48 hours set for the initial approval notifications sent to the approvers (1 & 2). In case Approver 2 requests for more information using the 'Request information' button, the TIMEOUT clock does not seem to reset and the notification is cancelled after 48 hrs even if the notification is in the queue of the requester.
    This is causing the escalation notification to be supervisor of approver 2.
    The question here is why does the timeout clock not reset when the notification goes back to the requester for additional information. Is this how the standard oracle workflow notification behaves ? Is there a way to customize and achieve this ?
    Warm Regards,
    Ashwin

    There is an enhancement request for this bug (Enhancement Request Bug 14492570
    Bug 14492570 : ER: TIMEOUT OCCURS EVEN THOUGH YOU SEND A REQUEST FOR MORE INFORMATION To Bottom )
    Also see Note [ID 1483552.1] regarding this issue

  • Request for information regarding the Lumia Denim and WP 8.1 Update 1 for Lumia 920

    When can those of us with the Lumia 920 get the Lumia Denim update and the Windows Phone 8.1 Update 1 Update for our phones? And does AT&T have a time fram for getting us Lumia 920 owners the update or are we not going to get this update until Windows Phone 10 comes out?

    GLIMMERMAN76 wrote:
    the phone is almost 3 years old they may not update it..  But then again there are suprise around every corner sometimes.  People with the 830 are waiting for an update also.When the update came out the phone was about two years old.  Now we expect GDR2. On the Microsoft update page there are seven AT&T Lumia phones. There would be eight but the 830 is no longer listed. Did AT&T have it removed ? Only three of these phones have the Denim update available, that is 37.5%.  Is AT&T even trying, I don't think so.  The same models of phones all over the world have been updated. Now WP10 is coming up. Microsoft says they will update WP10 directly, no carrier in the middle and they say it will be available to all phones and only phones running Lumia Denim, OS version 8.10.14219.341 or higher can be upgraded.  So, the phone has to have at least Denim before you can update.Will Windows 10 update be available for my Lumia phone? We bought two 920's from AT&T in 2012. Wife is still using hers and I replaced mine with a 1520.3 last year. It has Qi wireless charging and 32GB memory, not the AT&T version. We no longer have a contract and never will, using 'bring your own phone'.The other 62.5% of the Lumia phone users with AT&T probably feel the same way.  

  • Request for information from EFI Windows/Linux dual-booters

    Hi,
    As many of you know, I'm the developer of the rEFInd boot manager. I'm currently adding a new feature to rEFInd, the intent of which is to kick the Windows recovery boot options off of the main list of OSes and into the second row. The trouble is that I suspect there's a lot of variability in what the recovery boot loader is called. On a lot of computers with Windows 8 pre-installed, there seem to be recovery tools on a second non-ESP FAT partition, but I don't know what these tools are called in all cases. Thus, I'd appreciate it if those of you with Windows 8 EFI/UEFI installations could get back to me with this information. What I'd like is the filesystem label and complete file path to any Windows recovery tool(s) on your computer. For instance, "EFI/Manufacturer/bootmgfw.efi on the FOO filesystem boots to a Windows recovery tool." Note that the filesystem label is critical and it varies between manufacturers. It appears in the rEFInd menu (if rEFInd picks up the tool) and should be revealed by "blkid" under Linux. (I need the LABEL= value, not the PARTLABEL= value.) My intention is to incorporate all the known names as defaults in rEFInd, and give an override option to add to or replace that default list of filenames.
    You can post here (if the forum moderators don't mind), send me a PM on this system, or e-mail me ([email protected]). Thanks in advance for any responses.

    In my system originally created I have as follow
    /dev/sda1: LABEL="SYSTEM" UUID="3EB7-5907" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="6b139546-f3e4-423c-8a5a-5429389899b4"
    /dev/sda4: LABEL="OS" UUID="A478065E7806301A" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="a5dc35f6-5a5e-47f9-97d2-207ddf78489e"
    /dev/sda6: LABEL="Restore" UUID="FAC20D83C20D44FB" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="14fa438d-4143-4e70-923a-f3a4f971ceb9"
    As per partitioning
    # gdisk /dev/sda -l
    GPT fdisk (gdisk) version 0.8.8
    Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
    Found valid GPT with protective MBR; using GPT.
    Disk /dev/sda: 1465149168 sectors, 698.6 GiB
    Logical sector size: 512 bytes
    Disk identifier (GUID): E805A24A-C0ED-4E17-B852-352C5CD6A9F7
    Partition table holds up to 128 entries
    First usable sector is 34, last usable sector is 1465149134
    Partitions will be aligned on 2048-sector boundaries
    Total free space is 3757 sectors (1.8 MiB)
    Number Start (sector) End (sector) Size Code Name
    1 2048 616447 300.0 MiB EF00 EFI system partition
    2 179179520 220139519 19.5 GiB 0700
    3 616448 2721791 1.0 GiB 0C01
    4 2721792 179179519 84.1 GiB 0700 Basic data partition
    5 588779520 1423183871 397.9 GiB 0700 Basic data partition
    6 1423183872 1465147391 20.0 GiB 2700 Basic data partition
    8 220139520 261099519 19.5 GiB EF02
    9 261099520 383979519 58.6 GiB 0700
    10 383979520 588779519 97.7 GiB 0700
    $ sudo mount /dev/sda1 /boot/efi/
    $ ls /boot/efi/EFI/
    ASUS Boot Microsoft arch_grub gummiboot
    $ find /boot/efi/ -iname 'bootmgfw.efi'
    /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
    I hope I was of some help.

  • Request for information re: Book Download Center

    I recently discovered a potentially useful site, bookdownloadcenter.com, that purports to provide free access to ebooks for a subscription fee. The books they advertise are not just limited to Project Gutenberg and the like--many are pretty new. Naturally I viewed this with a high degree of suspicion, but when I did a pretty thorough search (admittedly limited to Google) for any sort of negative press on them (e.g. bad reviews, scam warnings, etc.) nothing popped up.
    It was quite a chore plowing through all the virtually identical positive reviews that they wrote for themselves, but I'm puzzled by the fact that not one person seems to have ever written anything bad about them, while nobody except themselves seem to have written anything good about them either. So my basic question, are they legit, and is this legal, is still unanswered. I thought that someone in here might be able to shed some light on this.
    Thanks for any guidance you can give.

    I agree on the "too good to be true" part, but maybe they're trying to build a reputation quickly or something similar. You know, something like they're offering lifetime memberships now to get some good press but later will change to periodic subscriptions for new customers.
    I am also troubled by the lack of a catalog, truth be told. However, as you say, if you give them the benefit of the doubt, then you have to take this seriously: "These aren't books by authors you have never heard of, they are popular well-known books which are selling in your local bookstore or on the iTunes iBookstore." That and the advertised 60-day money back guarantee are warring with my natural suspicion. I figure if anyone can tell me if they're legit, it would be someone from iTunes.
    As an aside, their Terms of Service (http://termsandprivacy.com/ebook/privacy.asp?domainName=www.bookdownloadcenter.c om) place them in the Bahamas.

  • Request for information on Contract Life Cycle in SRM 4.0

    Hi SRM Experts,
    I am implementing Contarct Process in SRM 4.0.
    How I can create PO (or cntract release order) with reference to contract (created with process contracts).
    Could you please provide SRM 4.0 contract Life Cycle.
    Thanks,
    Sudarsan

    none

  • How to use mathml in ID CS4 or CS5

    Hi,
    Can any one help me whether InDesign CS4 or CS5 support mathml for equation building.
    In my xml all equations are coded in mathml and I want to convert it to equation within indesign. And also on export, the equations must convert back to mathml.
    Thanks,
    Gopal

    I've never typeset math in ID but I found this post for you... Bookmark InDesign Secrets... its a fantastic site with great people.
    http://indesignsecrets.com/typesetting-math-in-indesign.php

  • Can we use Adobe Creative Suite (student version) CS4 and CS5 for commercial usage in Australia?

    Can we use Adobe Creative Suite (student version) CS4 and CS5 for commercial usage in Australia?
    Can we use for commercial purposes while we are studying?
    How about after we graduate?
    Thank you.

    Check your regional S&T pages for specifics. Generally commercial usage is allowed during school and after graduating, but in some regions extra restrictions may apply if e.g. your software is subsidized by your government or the license owned by the school and you just "loaned" it.
    Mylenium

  • Request for proper information and to refuse to help when it's missing

    On behalf of many of us volunteers who are getting tired of guessing the environment of those who are asking for help, I hereby
    ASK ALL VOLUNTEERS TO STOP RESPONDING TO REQUESTS FOR TECHNICAL ASSISTANCE THAT DO NOT PROVIDE SUFFICIENT INFORMATION
    In general, sufficient information should include:
    1) Operating system and Service Pack, not just the family.
    - Vista is a Family of operating systems. Insufficient information (need Home, Home Premium, etc.)
    - XP is a Family of operating systems. Insufficient information (need Home, Professional, etc.)
    - Linux is a Family of operating systems. Insufficient information (need Oracle Enterprise Linux 4 Update 4, Red Hat EL 4 Update 2, OpenSuSE 10.3, Fedora 8, etc.)
    2) Version of database installed to 4 digits (9.2.0.6, 10.2.0.3, 11.1.0.6) and the database's ORACLE_HOME and ORACLE_SID
    3) Which product being used to access the database, which computer that product is on, and the Oracle Home from which the product is run. (SQLPlus, same home as the database)
    4) The output of lsnrctl status, the contents of the tnsnames.ora and the contents of the listener.ora
    5) The output of the ipconfig /all or ifconfig and of hostname
    6) Copy paste of the actual error message, not just a paraphrase of part of a line..
    Any other ideas?

    I am not requesting this to be enforced by the forum.
    I am requesting that people like you and me reply by linking to this thread (or to the other excellent related threads) INSTEAD of replying. If we do it consistently, eventually the newbies will also enforce it voluntarily, and that will cut the useless teeth-pulling-effort replies to a minimum.
    In your 90% posts figure - you do realize that that means 90% of the posts are badly formed and are wasting your time as well as mine.
    Or - if they were properly formed - you and I could answer that with a lot less effort and a lot faster. With the implication is that the person asking would generally get a resolution a lot faster as well. Net result - you and I get to sleep more (or answer more questions) and people with problems are happier because they get them resolved faster.

  • How to update Phoshop cs4 to cs5 when adobe updater is lost? Which module should I download for Mac OS X 10.6.8?

    Please let me know how to update Photoshop cs4 to cs5 or cs 6 when adobe updater is no longer available? platform Mac OS X version 10.6.8
    Thank you.
    Regards

    If you mean you wish to purchase CS5 as an upgrade for CS4, Adobe no longer sells CS5.  You can purchase CS6, but not likely as an upgrade however because for many CS6 products they require CS5 or newer to qualify for an upgrade purchase of CS6.  Here is a link where you can check if the software you want is available as a CS6 upgrade for CS4....
    Purchase CS6 products:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • Correct install order for CS4 and CS5 on 32-bit system?

    I have CS5 (Master Collection) to install on a 32-bit Windows XP system.
    As the CS5 versions of both Premier Pro and After Effects require a 64-bit edition of Windows, included in the disc set are CS4 versions of those programs for this purpose.
    What, if any, is the preferred install order? I am inclined to install the CS4's first, assuming the CS5 install will overwrite/update some shared components.
    Should I install the CS4's first, CS5 first, or will it make no difference?

    The right procedure is installation of CS4 first then CS5.

  • IRec : Attachment to the Approval "Request for More information"

    Hi.
    How can we add attachment to "Request for more information" response functionality
    thanks
    siva

    Hi Siva,
    Unfortunately, there doesn't seem to be any such functionality at present. I am also exploring the same option and have a SR running with oracle. Shall update you if I hear otherwise.

  • I need to talk to someone about my billing, I have requested it be shut down for 5 months and I am still getting billed for the service

    Duplicate post - please see:
    i need to talk to someone about my billing, I have requested it be shut down for 5 months and I am still getting billed …
    Message was edited by: Admin Moderator

    *611 or 1-800-922-0204
    Good Luck

  • When I boot up i keep getting requests for keychain password, about 6 different things asking for it before i can get to desktop, HELP !!!!!

    When I boot up I keep getting requests for keychain password from various things ive never heard of like cloudd
    Like this basically
    Any ideas how i stop this
    Pete

    Hi Lutonpete,
    Welcome to the Apple Support Communities!
    I understand that you are receiving repeated prompts for different “Local Items” keychain passwords and know how frustrating this situation can be. There is a solution to this issue however. Please use the steps and information in the attached article to resolve this issue. 
    OS X Mavericks v10.9.1: Repeated prompts to unlock "Local Items" keychain - Apple Support
    Cheers,
    Joe

  • CS4 or CS5 for MAC

    I need to upgrade from Dreamweaver CS3 on my MAC, and can't find either CS4 or CS5 for MAC on Adobe web sites. What am I missing?

    I need to upgrade from Dreamweaver CS3 on my MAC, and can't find either CS4 or CS5 for MAC on Adobe web sites. What am I missing?
    Try here:
    http://www.adobe.com/products/dreamweaver/
    HTH,
    Randy

Maybe you are looking for