About EBS12 rapid clone issue

I always need to clone a test environment from PROD environment.
every time I configure the target system by "perl adcfgclone.pl ...", I always need to enter many value (such as SID, servername, oracle_home ...) by interactive mode, I think it is troublesome. so I want to find a simple way to confige the target system (perl adcfgclone.pl ) without interactive mode. such as identify a template file that save all the instacne value(SID,servername,ORACLE_HOME etc.), how to realise it ? please help, thanks!
Edited by: easonmy on 03-May-2012 00:03

Hi;
I suggest to check below links
Is it possible to run Rapid clone in a silent/automatic mode?
automatic cloning method
https://blogs.oracle.com/stevenChan/entry/certified_rac_scenarios_for_ebs_cloning
Regard
Helios

Similar Messages

R12 rapid clone issue.

Dear All,
I wanted to clarify a question regarding rapid clone since I encountered this in one of our customer site recently.
If preclone was not run before moving the source system to the target host, will the following work-around be sufficient.
1. Run the preclone on the db and Apps Tier
2. Copy RDBMS_ORACLE_HOME/appsutil to the target DB Tier and replace
3. Copy COMN_TOP/clone to the target Apps Tier and replace
4. Run the postclone scirpts.
You feedback is appreciated, thanks in advance.
Thanks &
Regards,

yes it is sufficient.
http://oracleajidba.blogspot.in/2010/07/what-happening-when-executing.html
Regards,
Haafiz

Issue in rapid clone

Hi,
i am facing a version mismatch with perl
this is the error
Perl lib version (5.10.0) doesn't match executable version (v5.8.8)
it comes just before execution of adclone.pl
my OS in rhel5
perl -v
gives 5.8.8
EBS is 12.1.2 and DB is 11.2.0.1

Hi,
/usr/bin/perlYou need to use Perl shipped with OracleAS 10.1.3 as per (Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]) -- You may also review these docs.
Perl lib version (5.00503) doesn't match executable version (5.006) [ID 391884.1]
Common Perl Setup Issues and Solutions for E-Business Suite 11i [ID 404055.1]
Thanks,
Hussein

About Rapid clone

My system is
O/S : Linux AS 2.1 (CPU 2.8Gh *2 , 4G mem)
EBS Version : 11.5.9
I want cloning so I have worked with rapid clone process document "Cloning Oracle Applications Release 11i with Rapid Clone 230672.1".
I have one question
Must I target system installed EBS 11.5.9 before "start perl script" or "source data copy" ??
otherwise taget system is running only copy source data ???

Hi Cho,
You can copy the source and start the rapid clone.
Magesh

R12.1.3 - clone issues now after DB upgrade to 11gr2

R12.1.3 on RH Linux x86_64.
Upgraded the dB from 11.1.0.7 to 11.2.0.3 over the weekend and now trying to do rapid clone and having some challenges.
1. adcfgclone.pl dbTechStack
First issue was after refreshing dbTier files and running "perl adcfgclone.pl dbTechStack".
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Errors about perl 5.10 vs 5.8 or something
o Ended up being because the $Oracle_Home/appsutil/jre directory didn't exist.
o Which still needs to be sorted out in Prod but for now I just copied it from Test.
o Then "export PATH=/app/oracle/ebsd/db/tech_st/11.2.0/perl/bin/:$PATH" to make it use new perl version.
Edit: This thread seems to be very similar but I still don't see the jre step that I missed that he refers to here.
https://forums.oracle.com/thread/2372594
I did re-run "How To Recreate the /appsutil/scripts/ directory [ID 377495.1]" but I see now that just creates the scripts directory and not my missing jre.
I do have it on a Test instance I upgraded some time ago. Can I just copy from there?
2. Then I used rman to refresh my database. This step worked ok.
3. adcfgclone.pl dbTier
Now trying to run this step and first issue is:
RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip 5.X is supported.
Please make sure you have UnZip 5.X in your path and try again...
I see some others pots on this but I can't apply patch yet so just modify PATH to use Linux unzip vs unzip 6 in $Oracle_Home.
Now I get:
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
If I check the log file at the end I see this:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
    Directory: /app/oracle/ebsd/db/tech_st/11.2.0/appsutil/install/EBSD_db6t
      adcrdb.sh               INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
One thing I do notice is when providing my responses it is suggesting my Dev Oracle_Home with the old 11.1.0 path instead of the path for my Prod server and the 11.2.0 directory.
Also the display is already set to my Test server while it should be making me change it from Prod.
Is that clear? Something is not right here... (obviously)

Well that wasn't the silver bullet I was hoping for.
Still getting "RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack".
If I look in my ApplyDBTier_06192204.log file I see.
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .58
and then "Warning: Unable to connect to Database" but the db is down now anyway so why the error?
and eventually:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
    Directory: /app/oracle/ebsd/db/tech_st/11.2.0/appsutil/install/EBSD_xxx
      adcrdb.sh               INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack

R12 Application Cloning without Rapid Clone.

Hello Experts
I am new to Apps Cloning.
And I am having some handson R12.
I have been tasked to clone an R12 Application Database manually(without using Rapid Clone)
I am done with the Database Cloning part.
Now struggling with Apps part.
One of the issues is :
applmgr>echo $PERL5LIB
/opt/perl_32/lib/5.8.8/IA64.ARCHREV_0-thread-multi:/opt/perl_32/lib/5.8.8:/opt/perl_32/lib/site_perl/5.8.8/IA64.ARCHREV_0-thread-multi:/opt/perl_32/lib/site_perl/5.8.8:/opt/perl_32/lib/site_perl:/opt/perl_32/lib/vendor_perl/5.8.8/IA64.ARCHREV_0-thread-multi:/opt/perl_32/lib/vendor_perl/5.8.8:/opt/perl_32/lib/vendor_perl:.:/a01/app/applmgr/tt1/apps/apps_st/appl/au/12.0.0/perl:/a01/app/applmgr/tt1/apps/apps_st/appl/au/12.0.0/perl
$perl admkappsutil.pl
JAVA - Pass a context file
Please let me know if any of you have any link for R12 manual apps cloning doc.
Please help
Thanks
-K

Hello I am new to EBS too. Can you please provide me the steps for cloning the db tier 11.2.0.3 for oracle ebs12.1.3
thanks,

Cloning Oracle Applications Release 12 with Rapid Clone

Hi,
I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
I couldn't understand a few points.
I would appreciate if someone can guide me regarding the following queries.
There is a statement in the doc
1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
--What is meant by topology in this description?
2)The Cloning methodology posted on this document requires full Autoconfig complience.
--didn't get this point.
3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
--what soft links are being talked about?will the regular cp -R command not preserve the soft links?
4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
--HOw do I check if AutoConfig is enabled or not?
5)Why do I need to synchronize appsutil on database tier from application tier?
6)Why do we need to maintaain snapshot information?
What does snapshot actually do?
Thannks,
Rushi

This is what I get when doing "grep rror" from 9239089 logfile.
will be ignored without error.
will be ignored without error.
will be ignored without error.
0 files had fatal errors.
0 files had fatal errors.
Performing second half of mirrored copies...
No mirrored copies were executed in this patch.
oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
oracle/apps/media/ieu_status_error
oracle/xml/parser/v2/XMLErrorMsg
oracle/xml/parser/v2/mesg/XMLErrorMesg
oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
Errors and warnings are listed in the log file
Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
Although there were neither failures nor any ORA- error in any of the log files.
Please guide what needs to be done regarding the shown errors for the patches.
after executing adpreclone on db tier I got the following message in logfile.
error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
What could have been wrong?
Is the message normal and can it be safely ignored?
As a pre-install task of patch 9239089,I executed adgrantsall.sql
which gave me a prompt Enter a value for 1:
I entered apps (apps schemaname/username)
Is it ok?
Thanks,
Rushi

Rapid Clone hangs on 50% on Windows 2003

Hi,
I am running Rapid Clone for the first time on a fresh install of 11.5.10.2 on Windows 2003.
I have applied all preprequisites and patches to the source environment, as per Metalink note 230672.1.
I have successfully prepared the source system, copied the souce system to the target system and configured the target system database server.
However when I attempt to configure the target system application tier, I get a small error message saying 'Installation failed'. The cloning process continues to run but hangs at 50%.
The command I am executing is:
cd <COMMON_TOP>\clone\bin
perl adcfgclone.pl appsTier
The last entries in the log file are:
AutoConfig Services Phase
Running Service Process 1 of 12 for AD_TOP
Executing script in InstantiateFile:
F:\MASTER\oracle\masterora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe -I F:\MASTER\oracle\masterora\iAS\Apache\perl\5.00503\lib\MSWin32-x86 -I F:\MASTER\oracle\masterora\iAS\Apache\perl\5.00503\lib -I F:\MASTER\oracle\masterora\iAS\Apache\perl\site\5.00503\lib\MSWin32-x86 -I F:\MASTER\oracle\masterora\iAS\Apache\perl\site\5.00503\lib -I F:\MASTER\oracle\masterappl\au\11.5.0\perl F:\MASTER\oracle\mastercomn\admin\install\MASTER_lsvgl01\adadmat.pl
script returned:
Validating information in AD_APPL_TOPS table........
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 2 of 12 for AD_TOP
Executing script in InstantiateFile:
F:\MASTER\oracle\mastercomn\admin\install\MASTER_lsvgl01\adsvalsn.cmd
I have noted from Metalink Note 218089.1, FAQ 55 that there is a known issue with adsvalsn.cmd and AutoConfig. I have applied the solution:
copy %AD_TOP%\bin\adstart.exe %COMMON_TOP%\util\SrvStart.exe
and re-run adcfgclone.pl.
This gets rid of the error message but the process still hangs at 50%.
Any assistance is gratefully received.
Thanks,
Mark

Many thanks for your replies, I have now successfully completed rapid clone.
I checked the log files and there were no errors. The information I posted above was the final entry in the log file.
Unfortunately I am having to perform this clone through remote desktop which is not ideal but unavoidable.
For those of you attempting to rapid clone 11.5.10.2 on Windows, I found the key areas to be:
(1) Before running adcfgclone.pl on the Apps tier:
Add the target <806 ORACLE HOME>\bin to the system path.
If, like me, you're unable to restart the server to globally export this variable (there's another running environment on the machine), you can set this dynamically in the command window by issuing the following command:
set PATH=<806 ORACLE HOME>\bin;%PATH%
To check if it's correctly set:
echo %PATH%
(2) Before running adcfgclone.pl on the Apps tier:
copy %AD_TOP%\bin\adstart.exe %COMMON_TOP%\util\SrvStart.exe
This overcomes a known issue with adsvalsn.cmd and AutoConfig (Metalink Note 218089.1, FAQ 55):
(3) Whilst adcfgclone.pl runs on the Apps tier:
At 50% the process appears to have trouble starting the Discoverer service. Give it a helping hand by starting it manually in the Services console.
Now to see if everything works OK!
Thanks again for your thoughts.
Mark

11i Rapid Clone Not Certified With 10g/11g RAC???

Metalink document 230672.1, "Cloning Oracle Applications Release 11i with Rapid Clone" was updated Feb. 2009 with the following:
February 04, 2009
- Added 11i/10g/11g RAC clarification on Section 4 Steps 6 and 7.
- Corrected incorrect format statements.
The clarification?
Attention: The following steps apply only for 9i RAC Clusters. Rapid Clone is not certified for Cloning 11i with 10g or 11g RAC Systems at this time.
10g RAC support for EBS has existed for quite a while, what's up with this? I'm in the middle of upgrading my 11i EBS on 9i RAC environments to 10gR2 RAC.
Anyone cloning 11i with 10g/11g RAC? How are you doing it?
Disgusted,
Jerry

Take a look Doc ID: 230672.1 on Metalink Section 6 talks about Cloning a RAC system
If you're trying to search for anything on EBS look for Applications 11i, because most docs refer to it as Applications 11i more often then EBS.
Cloning Oracle Applications Release 11i
with Rapid Clone

EBS 11i with 10g RAC - rapid clone

Hi,
I have installed Oracle EBS 11i (11.5.10) with Oracle 10g RAC (two node) on Linux server.
I am using ASM for 10g RAC.
Now I want to rapid clone the EBS to devp server having two node RAC.
Will you pls give me detail steps to perform this cloning?
Any help is highly appreciated.
Thanks,
DR

Take a look Doc ID: 230672.1 on Metalink Section 6 talks about Cloning a RAC system
If you're trying to search for anything on EBS look for Applications 11i, because most docs refer to it as Applications 11i more often then EBS.
Cloning Oracle Applications Release 11i
with Rapid Clone

New Rapid clone document

we have EBS R12.1.2 and plan to do the farm clone. on database side we will use database "hot backup".
Does any one know where is clone document which relate to "hot backup"?
Can I use RMAN backup or not? if YES any document?
Thanks.

Hi,
In addition to the document referenced above, please see:
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
Note: 807597.1 - How to deal with common issues on the Database Tier when cloning with Rapid clone
You can use RMAN, but I believe there is no specific document on how to use RMAN.
Thanks,
Hussein

Post Rapid clone

Hi Guys,
Platform is Linux
11.5.10.2
cloned source to Target successfully using rapid clone and done the finishing steps all is working fine.
However if I login to OAM, on Applications dashboard under "Host" I still see the source listed with the target.
Also if I go to Sitemap -> Autoconfig I still see the source listed under "Host" with the target
Please how can I clean up all the source listing from OAM.
Thanks in advance.
Message was edited by:
user569403

1) Issue the following as APPS user:
SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
SQL> commit;2) Run AutoConfig on the database tier, then on the application tier
Note: 391406.1 - How to get a clean Autoconfig Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391406.1

HT1338 There is a lot of talk about the Java security issues and the ability to download a patch fix, do i need to do this or will software update pick this up for me?

There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?

Thanks for that, how do I establish if I have Java installed as on Safari preferences it indicates the following
Web content - Enable Java
- Enable JavaScript

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

Rapid clone need redo logs

Hi,
Does Rapid clone need redo log files during cloning on target host on DB tier IN 11.5.10.2?
Thanks

Hi;
Per Note: 230672.1
"Copy the Database Tier File System
Log on to the Source System Database Node as the ORACLE user.
Perform a normal shutdown of the Source System Database
Copy the Database (DBF) files from the Source to the Target System
Copy the Source Database ORACLE_HOME to the Target System
Start up the Source Applications System Database and Application Tier processes"
Step "Copy the Database (DBF) files from the Source to the Target System" I think database files means data files and redo logs both in this scope.Basicly copy all dbtier from your target
Regard
Helios

About EBS12 rapid clone issue

Similar Messages

Maybe you are looking for