About ECM's function with release key

hello,every expert.
Help me solve a problem.
current situation:
we use the tunction with release key in ECM,when we process the last step,release ECO,at first,set status ECOR,next,input release key 01,finally,save.
in this case,if don't input release key,still may save.
hope result:
after set status ECOR,if don't input release key,don't allow save.
how to achieve our hope result?
Best Regard.
YangTing PANG.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Similar Messages

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Change master with release key

Hello,
When change master is created with release key, changes to material master is not possible.
However changes to BOM are possible. If someone wants to make changes possible for material master with release key then how one can do that?
Thanks in advance,
jagruti

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Extended Rebate Functionality with Variable Keys

Hello All,
I am trying to find information on extended rebate functionality in 4.7. I have looked though white pages G72, G63, and G64 but have yet to find what I am looking for.
Basically I want to be able to spread a rebate settlement (credit memos) to multiple partners in a customer hierarchy evenly based on their individual sales volume (instead of one Rebate recipient per agreement I want many based on customer hierarchy node).
I also would like to spread the settlement against multiple materials.
I have heard this is may be possible using the variable keys and structure S469 but for the life of me I cannot figure out if it is possible to do what I am asking.
I really appreciate any help that can be extended to me.
Thanks,
Lance

Hi Lance,
thr price-conditions ( values or rabates ) are stored in Tables like S+++ ( S469).
You want to have an access to a pricing table with other keys as you found in the standard system.
Therefor : make you own S9++.
there are the following steps:
Check, if your key is in the selected keys for pricing - if not, add it there.
The field must be in an apend of structure KOMG ( generally ) and KOMP ( for position fields ) or KOMK ( for header fields ).
Create your own S9++ -- ( in Pricing, i have about 150 own pricing tables ).
Next : go to the Customizing of the ?? German = Zugriffsfolge ?? for the condition.
Here you can add up to 99 Zugriffe to get the condition. Here you need your new S9++ and you have to connect it with the fields.
( i have had problems with the 'little' number of 99. for one Condition i need up to 160 Zugriffe - i have split it up into 2 Conditions ).
In one S9++ you can connect several fields to one Condition table.
The customer - numer and the hierarchi - number and the recipienst-number - all fields are of the sae kind.
In the Zugriffsfolgen, you can do several Zugriffe for the same Table S9++ - but in the connection of the fields, you can variate the souce fields -- first Zugriff : Customer - number / secons Zugriff : Hierarchy 1 / ....
With this method, you can also add customer fields of VBAP or VBAK into your pricing module.
I hope, youve got an idea, where t go. see also in the SAP documentation - in german, i have picked many things out of the documentation.
Hans

Activating ObjectKey's in change master with Release Key.

Hello Gurus,
I would like if SAP has come up with any solution for activating Object key for other objects apart from the standard BOM along with the release key.
Scenario:
I want my Engineering Record to create a change master with the Release key and use same the change master for making changes to Documents along with BOM. There is an OSS note 1767458 - WebUI: Object category enhancement for packages, release key for PLMWUI 746 and not for later versions of PLMWUI ( PLMUI 747).
Kindly advice.
Thanks & Regards
Jo

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Shift and CMD keys not functioning with other keys

System Specs:
15-inch, Early 2011
Processor 2.2 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Software OS X 10.8.5 (12F37)
Hello,
My issue is with the keybaord of my Macbook Pro. Just yesterday I noticed the following problems with my keyboard.
Error Issue:
Right Shift key+D
Right Shift key+C
Right Shift key+E
Left CMD+C
Are all not functioning. I don't know what happened, I ran the keyboard viewer and tested all these keys out, the weird thing is that I can use the alternate keys on right and left, like shift and CMD.
Please help your urgent feedback is appreciated.

I suggest trying the following (check after each step):
1) Reboot
2) Reset PRAM using this procedure: http://support.apple.com/kb/HT1379
3) Reset the SMC: http://support.apple.com/kb/ht3964
4) check in a different user space (maybe it's a preferences problem)
5) take to Apple store

How to setup MM costing and drive for new parts before ECM release key is triggered?

Hi,
I am on the engineering side of SAP ERP where I create new materials, BOMs, etc. We do this with a change master without release key today. We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM). The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production. There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed. Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
Thanks,
Joseph

the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

Release Key in ECM

Hi Gurus,
Can you tell me the importance of the Release key and Lock Change Number option given in the Set Up Control Data screen for the ECM.
Following Lock Change Number key options are there in SAP.
1) Global Release
2)Release for Costing
3)Release for Planning
4)Release for production.
Any detail document with ECM spro-configuration would have the full points in the basket.
Thanks,
Paddy

Hi Paddy,
In CC01 initial screen when choose "With Release key" option then no need to
attach an objects to the ECR/ECO, Tik/select only "Actv" "Object" MgtRec"
use the change number to change the object BOM/Routing, i.e. until you release the Change Number you don't see the change in Production order.
This is the relevancy of Release key in ECM.
When you lock the release key, i.e. you cannot make the changes affect in the production order or in OCM i.e order change management. So locking prevents you to make affect of changes in OCM.
similarly for costing, Planning & Global.
Regards
Rehman
Reward Points if Useful.

ECO number with revision level and release key

Hi All,
I have a requirement from client with regards to Engineering change manangement.
The scenario is that we are maintaining BOM for materials.Whenever a change is required for BOM a ECO number is created with release key.
Once the BOM is changed against ECO number is created a workflow is triggered for approval.
Then it goes through a series of approvals in the heirarchy.In each level the reviewer will propose a new value for the changed line item.
All these changes have to be maintained in record.At the end the final approver reviews all the proposed changes and release the ECO number with the appropriate change.
I had a thought of implementing the above scenario with ECO with revision level and release key.
But I am unable to replicate the scenario due the fact that,when I select the ECO number with release key,I cannot select the material in Object type.
Its disabled.Its available when I create a ECR with release key.
Please suggest a way to create ECO number with release key and revision level for BOM.
Regards
Richie

Hi,
You create the revision level against the material (via MM02, basic data tab)) not against the serial. The serial number, by definition, would be unique to the combination of material and revision.
Regards

ECM-Release key doubt

Hello team,
I have doubts on the below topic in ECM, i browsed through forum but i need some more clarity. If any one can help me it will be of great help.
Release key - In release key we have various areas where we can release like production, planning etc.
For example let us consider, i selected release to production (off course system says if we select production we need to select planing also).
I used this ECM to do changes in E bom released it to production using this key.
Does it mean a) P bom automatically gets updated with the changes which was used for E bom.
b) or is it like PP dept can use this data and make changes in P bom
c) System says it affects the respective areas what does that exactly mean
Please help me as i am confused.

Dear !!!
Please Follow up the Link It will help u and will guide u how to process
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?QuickLink=index&overridelayout=true]
with regards
Pushpalas

Question about function with in parameters

Hello,
I have a question about functions with in-parameters. In the HR schema, I need to get the minimum salary of the job_id that is mentioned as an in-parameter.
this is what I am thinking but I dont know if it's correct or not or what should I do next!
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
begin
SELECT min_salary INTO min_sal
FROM jobs
where job_id = get_minimum_salary(xy);
RETURN i_job_id;
end get_minimum_salary;
thanks in advance
EDIT
Thanks for your help all.
Is it possible to add that if the i_job_id which is the in type parameter does not have a minimum salary then use the following function to register an error:
create or replace procedure insert_error (i_error_code in number,
i_error_message in varchar2)
as
begin
insert into error_table (error_user, error_date, error_code, error_message)
values (user,sysdate,i_error_code,i_error_message);
end insert_error;
This function is basically to say that an error has occured and to register that error, at the same time I need to print out the error using the dbms_out.put_line.
Any ideas of how to do that?
Thanks again
Edited by: Latvian83 on Jun 1, 2011 5:14 AM

HI
I have made little bit changes in ur code. try this
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
v_Min_sal jobs.salary%type=0;---- Variable declaration
begin
SELECT min_salary INTO v_ min_sal
FROM jobs
where job_id = i_job_id;
RETURN v_Min_sal;
end get_minimum_salary;
Regards
Srikkanth.M

Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.

Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

My Media Keys are not functioning with iTunes 10.6.1...

My Media Keys are not functioning with iTunes 10.6.1... As i said
Keyboard: Microsoft Digital Media Keyboard 3000
I've actually had this issue since like what, 10.4? I've tried that dll fix thing and that does nothing. Any help out there so I can play my music without having to leave the micro player popped up all the time?

And included on the retail sales box.
http://www.apple.com/iphone/specs.html
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)

HT4111 I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessf

I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessful.

If you are using a Bluetooth keyboard on your iPad device, you should take advantage of the keyboard shortcuts for quicker access to copy, cut, paste, undo, redo, and other commands.
Command + C : Copy Selected Text
Command + V : Paste
Command + X: Cut Selected Text
Command + Z: Undo
Command + Shift + Z: Redo
Command + Delete: Delete everything to the left of the cursor on the current line
Option + Delete: Delete the word to the left of the cursor
Command + Up Arrow: Go to top of document
Command + Down Arrow: Go to bottom of document
Command + Left Arrow: Go to beginning of current line
Command + Right Arrow: Go to end of current line
F1: Dim screen
F2: Brighten screen
F7: Back one song
F8: Play/pause song
F9: Skip song
F10: Mute
F11: Decrease volume
F12: Increase volume
Eject button: Show or hide onscreen keyboard
 Cheers, Tom

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

About ECM's function with release key

Similar Messages

Maybe you are looking for