About EFI development with Visual Studio

Hi all!
Please help me about this problem issue bellow.
I 'm developing for a demo application about UEFI and EFI technology.
I using EFI_Toolkit_2.0 to build this demo follow some step on command line of Visual Studio from 2005 to 2010 , on Win7 32bit:
/cd EFI_Toolkit_2.0
build nt32
Nmake
And this is the result of it, it had a error
I found very much solution to resolve it but not successful.

Hi Tung,
The forum supports VS Setup and Installation. Your issue isn't related to the forum.
I suggest you post your issue to the related forum for better support.
Such as:http://www.uefi.org/
I will move the thread to off-topic forum. Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Beginning SharePoint 2010 Development with Visual Studio 2010

I am a beginner with SharePoint 2010 development with Visual studio 2010. Please guide me for some good, practical videos tutorials and books which would help me get started with programming. I need to build some workflow in VS2010 in C#. Please help!

Hi PinkRuby,
There are some good videos on the MSDN site that give a general overview of developing on the SharePoint platform.
http://msdn.microsoft.com/en-au/office/dn448488
Another good resource is PluralSight. You need a paid subscription (though it's not much), but it has lot's of great video content for learning.
http://pluralsight.com/training/Courses#sharepoint
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
I am a newbie at development in visual studio. Any help will be highly appreciated.
Thanks,
Rajib

Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
Look in the registry for HKLM\software\business objects and remove the business objects entry.
Download CR 2008 from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

SharePoint development with Visual Studio

I am just getting started SharePoint and developing .NET web parts for SharePoint. One of the things that is annoying me is that I have to remotely log in to server which is hosting SharePoint Foundation to do the development. It is making
development extremely slow.
Is there a way to develop visual studio web parts on your local machine and then deploy?
I am not sure if I even provided enough information. But please let me know if I can provide any more details.
Thanks

Sandbox solutions require the Server Object Model to be installed locally. The only form of development you can do without having SharePoint installed is the SharePoint 2013 App model.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint 2010 Remote Development using Visual Studio 2013 Connection Errors

I have a customer who is using a custom skinned site developed in Sharepoint 2010.
I am trying to debug a webpart that is not loading on a page.
My Environment:
Local Laptop running Win 7 64 Enterprise, Visual Studio 2013, and Sharepoint Designer 2010.
I connect to the customers network via VPN and use RDP to access the server. I have Admin rights to the server.
Everything that I have read indicates that Web Part dev has to be done in VS. When I try to connect using server explorer, VS kicks back a 'Server Can not be found' error.
I have tried using the computer name, the app url listed in SP Central Admin, the IP address of the box, and the actual URL of the site. However, VS can not connect to the server.
I have done some homework on connecting VS to a remote machine:
Adding New Servers in Server Explorer
http://msdn.microsoft.com/en-us/library/edfcxas2%28v=vs.71%29.ASPX
Add Server Dialog Box
http://msdn.microsoft.com/en-us/library/107b72aa%28v=vs.71%29.ASPX
SharePoint -how to connect remotely to production server
http://stackoverflow.com/questions/3188364/sharepoint-how-to-connect-remotely-to-production-server
SharePoint 2010 Development with Visual Studio
http://stackoverflow.com/questions/10529917/sharepoint-2010-development-with-visual-studio
Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Using SharePoint Designer 2010 to Work with Web Parts
http://msdn.microsoft.com/en-us/library/ff630941%28v=office.14%29.aspx#odc_sp14_qn_UsingSharePointDesigner2010WorkwithWebParts_CreateXSLTListView
The last connection article is confusing because one of the SO answers indicates that you do not need to have SP2010 installed.
I have been doing lots of reading on SP structure, and it seems to jump all over the place. (Or at least my research does). I have been reading this Ebook:
SharePoint 2010 Development with Visual Studio 2010
http://books.google.com/books/about/SharePoint_2010_Development_with_Visual.html?id=TVKICs4vHTcC
My questions are:
Why cant I connect to the Server if I connected through VPN which would inherently make the server a local network computer?
Do I need to have VS installed on the actual server? I read that I can install Sharepoint Foundation locally and this will give me access to the server in VS.
Do I need to have the full version of VS installed in order to use Remote Tools?
For the Web Parts:
Why cant I see the web parts in Sharepoint Designer? I take it they are exclusively designed in VS, which brings me back to the questions above.
In Sharepoint Designer, I can see a custom view that was created from a custom list. I want to add that list to the page where the web part isnt working. When I open up the Edit Interface, and try to find that list, it does not display in the 'Lists and Libraries'
menu

Hello,
As per your description, remote deployment is not possible for server side code in sharepoint so if you are using server object model then you won't be able to debug or deploy your solution from visual studio.
VS is not required to installed on UAT/prod server but you need sharepoint along with visual studio in same development machine to develop any custom webpart.
Once you deploy your custom webpart on site then you will be able to see that webpart in webpart gallery and that gallery is also available in designer so it means you can also add your custom webpart from designer to any page.
Correct me if i misunderstood you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Version of jvm.dll compatible with 64-bit development on Visual Studio 2013?

Hi. I am building a 64-bit C++ application under Visual Studio 2013. I am using jvm.dll to call Java methods from within the application. The issue is that the version of jvm.dll that is distributed with Java 7 and Java 8 are compiled with Visual Studio 2010 (and thus rely on the msvcr100.dll runtime library). This makes it very dangerous to use with a Visual Studio 2013 application which uses msvcr120.dll (mixing runtime libraries is a very big no-no). I am seeing random memory errors as a result, at the JNI interface level.
Is there any way to get a version of jvm.dll that is compiled with Visual Studio 2013 and is thus dependent on msvcr120.dll?
Thanks,
Dan

Hello,
As per your description, remote deployment is not possible for server side code in sharepoint so if you are using server object model then you won't be able to debug or deploy your solution from visual studio.
VS is not required to installed on UAT/prod server but you need sharepoint along with visual studio in same development machine to develop any custom webpart.
Once you deploy your custom webpart on site then you will be able to see that webpart in webpart gallery and that gallery is also available in designer so it means you can also add your custom webpart from designer to any page.
Correct me if i misunderstood you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Develop streaming data processing applications in C# with Stream Computing Platform and Storm in HDInsight. Can this be done with Visual Studio Community sign up?

Hello,
I am a student and love the Visual Studio Community 2013 to implement some of my research projects. I am currently working on a project that involves streaming data analysis. I found this article ( http://azure.microsoft.com/en-us/documentation/articles/hdinsight-hadoop-storm-scpdotnet-csharp-develop-streaming-data-processing-application/
) but do not have MSDN subscription (I cannot afford it) as required in the article. Can this be done somehow with Visual Studio Community 2013 sign up?
Thank you all in advance for your time and for your help.
J.K.W

Hi,
I just confirmed that the key with Visual Studio Community is that, although it is free like Express, it does not have the limitations that Visual Studio Express had. So, to answer your question, Yes - you can do all your development work as a student with
VS Community 2013 sign up. You can also refer to this blog for more details -
http://blogs.msdn.com/b/quick_thoughts/archive/2014/11/12/visual-studio-community-2013-free.aspx
Regards,
DebarchanS
DebarchanS - MSFT

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Move a Excel 2010 Dokument Addin Project (Visual Studio 2012) to another devleopment machine with Visual Studio 2012 , but Office 2013

Hi
we do have the following situation
on computer A there is a Excel Document Addin development project , Visual Studio 2012, Office 2010 installed. All works fine.
we would like to bring the project to another machine with Visual Studio 2012, but Office 2013 installed.
Visual Studio can not build the project. It says that the application is not installed on the machine (though Excel 2013 is installed , but not Excel 2010) It seems to have a problem with the
vbproj.
In other forums I found a hint that "Hostpackage = ..} needs to be set accordingly in the vbproj. I created then a "empty Excel-Addin project" under Visual Studio , looked at
the Hostpackage entry, put that into the vbproj of "problem project. It still does not work.
It would be great if anyone could help.
Thomas

Hello Eugene
Problem is that it says that projectboard (the name of the main project) can not be loaded. All other projects in the solution can be loaded. Strange thing is , now that I try to create a empty excel Project it says that according to Excel security settings
it can not be generated !?
I opened then Excel and set all Trust Center settings to "Default" - but no effect. I really have no idea what is wrong ..!?
Tom

SharePoint Connection not available with Visual Studio 2013

I've installed Visual Studio 2013 in my SharePoint 2010 environment. When I try to add the existing SharePoint Connections I've used in Visual Studio 2010 there is always the same error: Remote SharePoint site connections are not supported. The SharePoint
site is located at the same server, I'm able to access the Central Administration with Visual Studio 2013, but I can't access my development SharePoint Web Application.
I'm sure I do have access to the configuration database, in Visual Studio 2010 I'm able to delete and add SharePoint Connections without any problems. The URL of the development SharePoint connection (like sp1.sharepoint.contoso.com) is not named like
the URL of the Central Administration (like servername:5000). The port of my development SharePoint is 80, but I can't access with servername:80 too. My account is in the group of the local administrators, Visual Studio is started as Administrator
and my account is a SharePoint farm administrator and additionally a site collection administrator of all site collections in my SharePoint web application.
Any idea what's wrong with this SharePoint connections?
Thanks in advance. Georg

Can you try the following workaround and see if it helps? First try adding host entry for your server name and if that works change it to sp1.sharepoint.contoso.com.
SharePoint
2013 Visual Studio Project Error – “Cannot connect to the targeted site”
I understand your situation is different than the one mentioned in the blog but given you seem to have all the permission so may be you try and see if the error is because of above issue. Actually if above does not work (assuming your are on your development
environment), try adding your account to DB Owner on your site collection database as mentioned here.
http://www.sharemuch.com/2010/03/19/resolving-vs-2010-solution-deployment-issues-for-sharepoint-2010-projects/
Amit

Crystal Report Dll problem with Visual Studio 2005

I am using Crystal Reports with Visual Studio 2005. At one time there were two different version of Crystal Decision Dll in Global Assembly Cache (GAC). So I uninstalled both the versions and then only installed 10.2.3600.
I am facing the following error when building my application in visual studio.
The type 'CrystalDecisions.CrystalReports.Engine.ReportDocument' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\arms website\301a5b02\e03ad7d9\assembly\dl3\c30f5560\00f92427_3857ca01\CrystalDecisions.CrystalReports.Engine.DLL'
and
'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine\10.2.3600.0__692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.dll'
I have only installed it in .Net Framework. For some reason it appears in the temp folder. I cannot delete it and when I renamed it after the next compile it came back again.
I would appreciate any help.

Thanks for the tip.
I installed CR XI R2 with SP2 and 2.1
There are few reports in the system they use to run fine but now when I try to run them I get the following error:
Failed to open the connection. Details: [Database Vendor Code: 4060 ] Failed to open the connection. C:\DOCUME1\SSheikh\LOCALS1\Temp\ZGA370 {71BFCD35-F652-48C8-896D-B93229A4D2C2}.rpt Details: [Database Vendor Code: 4060 ]
I understand that these reports run ok independently and on production machine as well; however when I try to run them from my development machine I get the above error.
I would appreciate help to resolve this. The code of the report is with report developer and I need to know what settings do I need to change where to be able to run the reports. Also I use my machine for deployment of application on the production server.
Thanks.

Crystal Report X1 compatibility with Visual Studio 2008

We are migrating an application running on .NET 1.0 to .NET 3.5. Previously Crystal report X1 was working fine with .NET 1.0 however now when it has been migrated to .NET 3.5, we are able to generate crystal report but print and export functionality is not working.
Please confirm if Crystal report X1 is compatible with Visual studio 2008/.NET 3.5? We even updated Release 2 SP4 patch but that didn't solve the problem.
If crystal report X1 is not compatible with Visual studio 2008, which version is compatible so that we can buy the license for the same?

Hello Anurag,
CR XI R1 is not supported for VS 2008.
but for
u2022 Visual Studio .NET 2002
u2022 Visual Studio .NET 2003
CR XI R2
u2022 Visual Studio .NET 2002
u2022 Visual Studio .NET 2003
u2022 Visual Studio .NET 2005
CR XI R3
u2022 Visual Studio 2003
u2022 Visual Studio 2005
CR XI R3 Service Pack 1
Microsoft .NET Framework
u2022 .NET 1.1
u2022 .NET 2.0
u2022 .NET 3.0
u2022 .NET 3.5
Development Platforms
u2022 Visual Studio 2003
u2022 Visual Studio 2005
u2022 Visual Studio 2008
Hope this helps
Falk

Troubles with Visual Studio Ultimate 2013

Help, please, to resolve issue with Visual Studio Ultimate 2013:
VS 2013 Ultimate update 2
System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateDesignerProcess(String applicationPath, String clientPort, Uri hostUri, IDictionary environmentVariables, Int32& processId, Object&
processData)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.ProcessIsolationDomain..ctor(ProcessDomainFactory factory, IIsolationBoundary boundary, AppDomainSetup appDomainInfo, FrameworkName targetFramework,
String identifier, String baseDirectory)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.Initialize()
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.CreateInstance[T](Type type)
at Microsoft.Expression.DesignHost.Isolation.IsolatedObjectFactory.Initialize()
at Microsoft.VisualStudio.ExpressionHost.Services.VSIsolationService.CreateObjectFactory(IIsolationTarget isolationTarget, IObjectCatalog catalog)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.CreateLease(IIsolationTarget isolationTarget, CancellationToken cancelToken, DesignerServiceEntry& entry)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.IsolatedDesignerView.CreateDesignerViewInfo(CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.InvokeWithCulture[T](CultureInfo culture, Func`2 func, CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.<>c__DisplayClassa`1.<StartTask>b__6()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
Thanks You!

Hi Jaer,
>>System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
Since this forum is support the English language, so I suggest you can provide me the Exception message by the English.
In addition, I suggest you can provide me more detail message about your issue as the pvdg42's suggestion.
For example:
How did you get the system exception?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Associate a dtsx package with Visual Studio

when i double click a dtsx package created via import /export wizard, it opens it in Word. what can i do to get it to open in Visual Studio.?
sukai

Hi sukai,
By default, if we’ve ever used Word program open this .dtsx format file, then it always opens .dtsx file in Word.
If we want to directly open the .dtsx file with Visual Studio, we can change the program. For more detail steps, please see:
Right-click file to select “Open with” option.
Expand “+” next to Other Programs.
Click Browser to navigate to “C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE”, then select devenv.exe application.
Click OK. In this way, the .dtsx file would be always opened with Visual Studio. We can design the package, but cannot execute it.
Besides, as Arthur said, by default, the .dtsx file is opened with SSIS Package Execution Utility (DTEXECUI.EXE Utility). I strongly recommend that we should create a SSIS project, then add the package with “Add existing package” option from File System. At
this time, we can edit, execute and deploy it in SQL Server Data Tools.
Reference:
https://www.blackbaud.com/files/support/guides/infinitydevguide/Subsystems/bbdw-developer-help/content/tkaddpackagefromexisting.htm
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

About EFI development with Visual Studio

Similar Messages

Maybe you are looking for