About Enjoy Transactions ------ Very Urgent

Is it recommendable to use BDC for Enjoy Transactions ?
If no , Why ?

hi,
Enjoy transactions use Enjoy SAP Controls like ALV Grid, ALV Tree. If you run BDC in background these Controls would not be able to communicate front-end since they need some files in front-end (client - PC), so BDC fails.
Therefore what can be done? There are two possibilities:
1- ) There might be a alternative, usually older version, transaction. You can use it. For example ME22N is a Enjoy transaction, but ME22 is the older one, does the same thing. So ME22 can be used.
2- ) If it is available, a BAPI can be used. Whatever you want to do, you can search BAPIs and use it instead of BDC technique.
Hope this is helpful, Do reward.
Edited by: Runal Singh on Feb 6, 2008 6:26 PM

Similar Messages

Customization of CAT2 transaction - Very Urgent

Dear SDNers,
We have created variant version for standard CAT2 transaction using SHDS trans code. (Just to hide some of the options from the end user to enhance the usability). To extend the usability, we need to do the following activity.
In the Release View of CAT2, when user clicks Release, the save should happen internally. Could we achieve this using some configuration? If not, to achieve this activity, how can I proceed to perform further customization? Could we achieve this by modifying some HTML / Dynpro code etc? If, what could be the approach?
<b>PS:
I am not interested to do the customization of standard CAT2 transaction program using user exits and then create variant out of this.
I have explored CATW but the client shown interest to use standard CAT2
</b>
Points will be awarded immediately.

Hello Seshagiri,
your question is not really about ITS, but rather on how to customize the Application. I am not sure if there is a forum for CA-TS, but if there is, I am pretty certain you will get more (and better) answers there ...
Regards,
Jan

About Oracle Reports very urgent

can you pls explain me about what isOracle reportcaching,interactivereports and batched reports.

pls refer [     Publishing reports to web - 10G ]see link below
caching
reports o/p is cached in oh/reports/cache so that if later a report with same cmd line param is requested, the c ached report is returned.
interactive report
- didnt get fully. It may mean report with embedded links which in turn will submit request to run other reports and hence being interactive
batch reports
- submitting a number of reports in batches to reports server in batch mode (batch=yes) and potentially scheduled using schedule cmd line parameter.
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Very urgent, no Transacctions Types possible to create Business Transaction

Hello, this question is very urgent, please I will be very pleased if anybody can helps me.
When I want to create a Business Transaction, at CRMD_ORDER, I dont have any Transaction Type to choose to create the Business Transaction, so I can't create anyone.
I have got many Transaction types, I am usign CRM 5.0 and I have got many Transaction Types with all Channel communication allowed.
Please check this image for further information:
<a href="http://img380.imageshack.us/my.php?image=businesspq5.jpg">http://img380.imageshack.us/my.php?image=businesspq5.jpg</a>

HI Fernando,
Please check whether all your Transaction type are in Active mode or Not.
Also check the Allowed Channels status, if it is not filled please add the same from the drop down.
Regards
Arun Kumar

Hi all..very urgent..problem with the transaction VL10.

Hi gurus,i having trouble in executing the transaction VL10.
the procedure is as follows.
1.Enter the transaction VL10
2.Select Sales orders Tab
Enter sales document number 16283319 to 16283320
Remaining all fields should be blank
3.Click on Execute Icon.
4.Selected two Sales Documents.
5.Clickd on Back ground icon.
6.Error i am getting is OBJECT REQUESTED IS CURRENTLY LOCKED BY USER PSREDDY.
Can anybody help me with this..very urgent and full marks wud be given.

Hi Sahil,
Go to transaction SM12, put user name PSREDDY.
Exceute it, and select all entry and delete.
After follow the same procedure, you followed early.
Hope it will solve the problem.
Regards
Krishnendu

How to go about with a finance project in BW - very urgent

Dear Guru's
As i need to extract the data from R/3 for the first time, how should i decide to go for extractors. those are financial datas. should i go to COPA or FISL or Generic Extraction. how to proceed with, kindly help me in this regards, it's very urgent.
Thanks and Regards
C.S.Ramesh
Edited by: cs ramesh on Feb 14, 2008 6:12 PM

Hello Ramesh,
Please find the links of the datasources,Infocubes etc
5. Business Analytics to be available at single click of a button giving important business insights such as
a. Vendor wise expenditure
b. Customer wise revenue
[Customer / Vendor Analysis (FI-AP & FI-AR)|http://help.sap.com/saphelp_bw33/helpdata/en/ea/cd143c5db89b00e10000000a114084/content.htm]
c. Revenue streams for varying time windows (monthly, quarterly, annually)
d. Comparison reports (against similar time windows)
e. Category wise expenses
[General Ledger Accounting |http://help.sap.com/saphelp_bw33/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm]
f. Statistical reports (highs, lows, averages etc)
1. [Overhead Cost Controlling|http://help.sap.com/saphelp_bw33/helpdata/en/83/7593020c9b9d468746a2e4a132838b/content.htm]
Statistical key figure analysis
Thanks
Chandran
Edited by: Chandran Ganesan on Feb 14, 2008 8:59 AM

Very urgent:about deployment kit or executable option

hay programmers
i have a very urgent problem
i want to make my developer project as executable
is this possible
the next thing is that is there any deployment kit available for developer 6i so that it will automatically install the application as well as developer runtime.
any suggestion regarding this will be wellcome.
Send it to [email protected]
Thanks
Kamran Ahmed

You can use Oracle Software Packager. It can be found on this site.

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Personnel Data Iview Error (It's very Urgent)

Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
     ... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.

Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.06.2007 09:54:55
     Short text
          Access via 'NULL' object reference not possible.
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
           has
          come across a statement that unfortunately cannot be executed.
     What can you do?
          Note down which actions and inputs caused the error.
          To process the problem further, contact you SAP system
          administrator.
          Using Transaction ST22 for ABAP Dump Analysis, you can look
          at and manage termination messages, and you can also
          keep them for a long time.
     Error analysis
          An exception occurred that is explained in detail below.
          The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
           caught in
          procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
           clause.
          Since the caller of the procedure could not have anticipated that the
          exception would occur, the current program is terminated.
          The reason for the exception is:
          You attempted to use a 'NULL' object reference (points to 'nothing')
          access a component.
          An object reference must point to an object (an instance of a class)
          before it can be used to access components.
          Either the reference was never set or it was set to 'NULL' using the
          CLEAR statement.
     How to correct the error
          Probably the only way to eliminate the error is to correct the program.
          If the error occures in a non-modified SAP program, you may be able to
          find an interim solution in an SAP Note.
          If you have access to SAP Notes, carry out a search with the following
          keywords:
          "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
          "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
          "HRXSS_PER_CLEANUP"
          If you cannot solve the problem yourself and want to send an error
          notification to SAP, include the following information:
          1. The description of the current problem (short dump)
             To save the description, choose "System->List->Save->Local File
          (Unconverted)".
          2. Corresponding system log
             Display the system log by calling transaction SM21.
             Restrict the time interval to 10 minutes before and five minutes
          after the short dump. Then choose "System->List->Save->Local File
          (Unconverted)".
          3. If the problem occurs in a problem of your own or a modified SAP
          program: The source code of the program
             In the editor, choose "Utilities->More
          Utilities->Upload/Download->Download".
          4. Details about the conditions under which the error occurred or which
          actions and input led to the error.
          The exception must either be prevented, caught within proedure
          "HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
           in the
          RAISING clause of the procedure.
          To prevent the exception, note the following:
     System environment
          SAP-Release 700
          Application server... "ptgsap10"
          Network address...... "192.168.1.18"
          Operating system..... "Windows NT"
          Release.............. "5.2"
          Hardware type........ "2x Intel 80686"
          Character length.... 16 Bits
          Pointer length....... 32 Bits
          Work process number.. 0
          Shortdump setting.... "full"
          Database server... "PTGSAP10"
          Database type..... "ORACLE"
          Database name..... "EC6"
          Database user ID.. "SAPSR3"
          Char.set.... "C"
          SAP kernel....... 700
          created (date)... "Aug 29 2006 00:18:21"
          create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
          Database version. "OCI_10201_SHARE (10.2.0.1.0) "
          Patch level. 75
          Patch text.. " "
          Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
          SAP database version. 700
          Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
          Memory consumption
          Roll.... 8176
          EM...... 2090448
          Heap.... 0
          Page.... 0
          MM Used. 1208256
          MM Free. 880672
     User and Transaction
          Client.............. 001
          User................ "ESS_USER1"
          Language Key........ "E"
          Transaction......... " "
          Program............. "SAPLHRXSS_PER_MAC"
          Screen.............. "SAPMSSY1 3004"
          Screen Line......... 2
          Information on caller of Remote Function Call (RFC):
          System.............. "########"
          Database Release.... 645
          Kernel Release...... 700
          Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
          Call Type........... "synchron and non-transactional (emode 0, imode 0)"
          Inbound TID.........." "
          Inbound Queue Name..." "
          Outbound TID........." "
          Outbound Queue Name.." "
          Client.............. "###"
          User................ "############"
          Transaction......... " "
          Call Program........." "
          Function Module..... "HRXSS_PER_CLEANUP"
          Call Destination.... "ptgsap10_EC6_10"
          Source Server....... "EPSAND1"
          Source IP Address... "192.168.1.36"
          Additional information on RFC logon:
          Trusted Relationship " "
          Logon Return Code... 0
          Trusted Return Code. 0
          Note: For releases < 4.0, information on the RFC caller are often
          only partially available.
     Information on where terminated
          Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
           "HRXSS_PER_CLEANUP".
          The main program was "SAPMSSY1 ".
          In the source code you have the termination point in line 13
          of the (Include) program "LHRXSS_PER_MACU04".
          The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
          procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
           nor declared
          in the RAISING clause of its signature.
          The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
           line
          1 of the (Include program "LHRXSS_PER_MACU04 ".
     Source Code Extract
     Line     SourceCde
         1     FUNCTION hrxss_per_cleanup.
         2     *"----
         3     ""Local interface:
         4     *" EXPORTING
         5     *"     VALUE(MESSAGES) TYPE BAPIRETTAB
         6     *"----
         7
         8     * CALL METHOD mac_adapter->cleanup
         9     *    IMPORTING
        10     *      messages = messages.
        11
        12     * TRY.
     >>>>>       CALL METHOD xss_adapter->cleanup
        14         .
        15     * CATCH CX_HRPA_VIOLATED_ASSERTION .
        16     * ENDTRY.
        17       IF NOT xss_adapter2 IS INITIAL.
        18         CALL METHOD xss_adapter2->cleanup.
        19       ENDIF.
        20
        21     ENDFUNCTION.
     Contents of system fields
     Name     Val.
     SY-SUBRC     0
     SY-INDEX     2
     SY-TABIX     13
     SY-DBCNT     30
     SY-FDPOS     0
     SY-LSIND     0
     SY-PAGNO     0
     SY-LINNO     1
     SY-COLNO     1
     SY-PFKEY
     SY-UCOMM
     SY-TITLE     CPIC and RFC Control
     SY-MSGTY
     SY-MSGID
     SY-MSGNO     000
     SY-MSGV1
     SY-MSGV2
     SY-MSGV3
     SY-MSGV4
     SY-MODNO     0
     SY-DATUM     20070627
     SY-UZEIT     095455
     SY-XPROG     SAPLHRXSS_PER_MAC
     SY-XFORM     HRXSS_PER_CLEANUP
     Active Calls/Events
     No.   Ty.          Program                             Include                             Line
           Name
         4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
           HRXSS_PER_CLEANUP
         3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
           HRXSS_PER_CLEANUP
         2 FORM         SAPMSSY1                            SAPMSSY1                               85
           REMOTE_FUNCTION_CALL
         1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
           %_RFC_START
     Chosen variables
     Name
         Val.
     No.          4     Ty.      FUNCTION
     Name      HRXSS_PER_CLEANUP
     MESSAGES
          Table[initial]
     SY-XFORM
          HRXSS_PER_CLEANUP
             455555545544444552222222222222
             82833F052F3C51E500000000000000
             000000000000000000000000000000
             000000000000000000000000000000
     %_DUMMY$$
             2222
             0000
             0000
             0000
     XSS_ADAPTER2
             F0000000
             F0000000
     No.          3     Ty.      FORM
     Name      HRXSS_PER_CLEANUP
     SYST-REPID
          SAPLHRXSS_PER_MAC
             5454455555545544422222222222222222222222
             310C82833F052FD1300000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     %_%_MESSAGES
          Table[initial]
     No.          2     Ty.      FORM
     Name      REMOTE_FUNCTION_CALL
     %_DUMMY$$
             2222
             0000
             0000
             0000
     SY-REPID
          SAPMSSY1
             5454555322222222222222222222222222222222
             310D339100000000000000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     SYST-REPID
          SAPMSSY1
             5454555322222222222222222222222222222222
             310D339100000000000000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     HEADER
             000000000000
             000000000000
     TYPE
          3
             0000
             3000
     SY-XPROG
          SAPLHRXSS_PER_MAC
             5454455555545544422222222222222222222222
             310C82833F052FD1300000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     %_ARCHIVE
             2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     RC
          0
             0000
             0000
     SY-XFORM
          HRXSS_PER_CLEANUP
             455555545544444552222222222222
             82833F052F3C51E500000000000000
             000000000000000000000000000000
             000000000000000000000000000000
     %_SPACE
             2
             0
             0
             0
     No.          1     Ty.      MODULE (PBO)
     Name      %_RFC_START
     %_PRINT
              000                                                                                0###
             2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     RFCTYPE_INTERNAL
          3
             0000
             3000
     Internal notes
          The termination was triggered in function "method_call_iref"
          of the SAP kernel, in line 2203 of the module
           "//bas/700_REL/src/krn/runt/abmethod.c#7".
          The internal operation just processed is "METH".
          Internal mode was started at 20070627095455.
     Active Calls in SAP Kernel
     Lines of C Stack in Kernel (Structure Differs on Each Platform)
     SAP (R) - R/3(TM) Callstack, Version 1.0
     Copyright (C) SAP AG. All rights reserved.
     Callstack without Exception:
     App       : disp+work.EXE (pid=24080)
     When      : 6/27/2007 9:54:55.565
     Threads   : 2
     Computer Name       : PTGSAP10
     User Name           : SAPServiceEC6
     Number of Processors: 2
     Processor Type: x86 Family 6 Model 11 Stepping 1
     Windows Version     : 5.2 Current Build: 3790
     State Dump for Thread Id 6cd0
     eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
     eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0         nv up ei ng nz ac po cy
     cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00200297
     function : KiFastSystemCallRet
             7c82ed54 c3               ret
             7c82ed55 8da42400000000   lea     esp,[esp]              ss:0549c640=7c822124
             7c82ed5c 8d642400         lea     esp,[esp]              ss:27f2ac53=????????
     FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
     0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
     0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
     0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
     0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
     0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
     0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
     0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
     0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
     0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
     0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
     0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
     0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
     0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
     0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
     0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
     0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
     0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
     0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
     0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
     0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
     0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
     0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
     0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
     State Dump for Thread Id 6408
     eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
     eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0         nv up ei pl zr na po nc
     cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00000246
     function : KiFastSystemCallRet
             7c82ed54 c3               ret
             7c82ed55 8da42400000000   lea     esp,[esp]              ss:0770fec0=7c821514
             7c82ed5c 8d642400         lea     esp,[esp]              ss:2a19e4d3=????????
     FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
     0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
     0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
     0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
     0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
     List of ABAP programs affected
     Index     Typ     Program     Group     Date     Time     Size     Lang.
          0     Prg     SAPMSSY1          0     11.04.2005     09:27:15         21504     E
          1     Prg     SAPLHRXSS_SER_AUTHORITHY_CHECK          1     13.02.2005     19:00:30         16384     E
          2     Prg     SAPLASTAT_TRIG          2     09.09.2004     14:18:33         13312     E
          3     Typ     ASTAT_TYP2          0     10.11.1998     05:35:18          2048
          4     Typ     ASTAT_TYP1          0     30.11.1998     15:54:16          2048
          5     Prg     SAPLSAUTHTRACE          5     07.03.2005     08:51:05         57344     E
          6     Typ     USOBHASH          0     02.07.2003     13:15:24          3072
          7     Prg     SAPLSECH          7     05.07.2005     13:10:18         26624     E
          8     Typ     CVERS          0     09.11.2000     14:05:49          2048
          9     Prg     SAPLHRXSS_PER_MAC          9     10.02.2004     14:21:15         49152     E
         10     Prg     CX_SY_REF_IS_INITIAL==========CP         10     05.07.2005     13:10:16         10240     E
         11     Typ     SCX_SRCPOS          0     18.05.2004     14:07:11          2048
         12     Prg     CX_DYNAMIC_CHECK==============CP         12     05.07.2005     13:10:16         10240     E
         13     Prg     CX_ROOT=======================CP         13     05.07.2005     13:10:16         11264     E
         14     Prg     CX_NO_CHECK===================CP         14     05.07.2005     13:10:16         10240     E
         15     Prg     CX_SY_NO_HANDLER==============CP         15     05.07.2005     13:10:16         10240     E
         16     Typ     SYST          0     09.09.2004     14:18:12         31744
     Directory of Application Tables
     Name                                     Date       Time       Lngth
         Val.
     Program      SAPMSSY1
     SYST            . .            : :          00004612
          \0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
     ABAP Control Blocks (CONT)
     Index     Name     Fl     PAR0     PAR1     PAR2     PAR3     PAR4     PAR5     PAR6     Source Code     Line
       246     FUNC     03     0020                                   LHRXSS_PER_MACU03            1
       247     PAR2     02     0000     001B     C000                         LHRXSS_PER_MACU03            1
       249     FUNC     13     0003                                   LHRXSS_PER_MACU03            1
       250     PAR2     01     0000     0011     C001                         LHRXSS_PER_MACU03            1
       252     FUNC     FF     0000                                   LHRXSS_PER_MACU03            1
       253     ENDF     00     0000                                   LHRXSS_PER_MACU03            1
       254     -
     00     0000                                   LHRXSS_PER_MACU03            1
       255     STCK     02     C001                                   LHRXSS_PER_MACU03            1
       256     CPOP     00     0000                                   LHRXSS_PER_MACU03            1
       257     -
     00     0000                                   LHRXSS_PER_MACU03            1
       258     FUNP     3E     0000     0011     8000     0000     8000     0000     0000     LHRXSS_PER_MACU04            1
       262     FUNP     80     0000     0000     0000     0000     0000     0000     0000     LHRXSS_PER_MACU04            1
     >>>>>     METH     03     0000     0000     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           13
       270     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           13
       272     CMPS     20     024B     001B     001B                         LHRXSS_PER_MACU04           17
       274     BRAF     05     0007                                   LHRXSS_PER_MACU04           17
       275     METH     03     0000     0001     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           18
       279     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           18
       281     FUNE     00     0000                                   LHRXSS_PER_MACU04           21
       282     -
     00     0000                                   LHRXSS_PER_MACU04           21
Thanks and Regards,
Phanikumar

Prb in understanding fields of VBAK(ITS VERY URGENT)

HI,
    Can u tell me, whats the diff. bet ORDER TYPE & SALES DOC CATEGORY.
vbtyp & auart of vbak table
is VBTYP = 'H' only dependent on AUART = 'ZRE'
ZRE = RMA Returns...
Its very urgent.......
Regards,
Parvez.

Hi Parwez,
                    See AUART - is the Order Type which defines that it can a standard order ,Return Order ( ZRE) ,Order without charge ,Credit Memo ,Debit Memo.
The sales document type determines how the system processes the sales
document. For example, depending on the sales document type, the syste
determines which screens to present and which data to ask you for.
While SALES DOC CATEGORY VBTYP indicates it is a conctract ,sales order ,return order ,Purchase Order ,Schedule Agreement .
A classification for the different types of documents that you can
process in the sales and distribution system (for example: quotations,
sales orders, deliveries, and invoices).
The document category determines how the system stores and keeps track
of document data. It enables the system to provide you with status
information about delivery processing, billing, and documents that are
used for reference (for example, inquiries and quotations).
A     Inquiry
B     Quotation
C     Order
D     Item proposal
E     Scheduling agreement
F     Scheduling agreement with external service agentI     Order w/o charge
J     Delivery
K     Credit memo request
L     Debit memo request
M     Invoice
N     Invoice cancellation
O     Credit memo
P     Debit memo
Q     WMS transfer order
R     Goods movement
S     Credit memo cancellation
T     Returns delivery for order
U     Pro forma invoice
V     Purchase order
W     Independent reqts plan
X     Handling unit
0     Master contract
1     Sales activities (CAS)
2     External transaction
3     Invoice list
4     Credit memo list
5     Intercompany invoice
6     Intercompany credit memo
7     Delivery/shipping notification
8     Shipment
a     Shipment costs
c     Unverified delivery
e     Allocation table
g     Rough Goods Receipt (only IS-Retail)
h     Cancel goods issue
i     Goods receipt
j     JIT call
r     TD Transport (only IS-Oil)
s     Load confirmation, reposting (only IS-Oil)
t     Gain    / loss    (only IS-Oil)
u     Reentry into storage (only IS-Oil)
v     2-step Goods receipt (only IS-Oil)
w     Reservation (only IS-Oil)
x     Load confirmation, goods receipt (only IS-Oil)
$     (AFS)
Please Reward if useful .

Badi's on vi01. Pls Its very urgent

Hi Experts,
      I have given the requirement below I am not aware of badi's. Pls tell me the info about Business event 1120P. And also post the coding for this functionality . Its very urgent
Enhancement Summary
Two user exits are needed to determine the correct G/L Account and Cost Center on Shipment Cost documents and post the Material Group on the Accounting document. BADI_SCD_ACCTG and Business Event 1120P can be used to accommodate the new functionality.
Business Process
Specific G/L Accounts and Cost Centers have to be determined to post on the Shipment Cost document. This is needed to provide accurate management reporting capabilities on shipments for Sales Order or Stock Transfer Order. A new custom table must be created which contains the following information: Distribution, Mode of Transport, Account, Cost Center Material group. Distribution is an identifier here if this shipment originated from an SO or STO.
There are no screens involved in this enhancement.
Components
Table: ZTABLE1
Field     Data Element     Type     Length     Description
MANDT     MANDT     CLNT (key)     3     Client
DISTRIBUTION     Z_DISTRIBUTION     CHAR (key)     1     Distribution
MOT     ZZDEF_MOT     CHAR (key)     2     Mode of Transportation
MATKL     MATKL     CHAR (key)     9     Material group
SAKNR     SAKNR     CHAR     10     G/L Account Number
KOSTL     KOSTL     CHAR     10     Cost Center
This table gets updated manually by the FI team.
Values for Distribution are:
1 = Primary Distribution to Refinery
2 = Primary and Secondary Excluding refinery
All entries must be checked against SAP config and master tables
User exit BADI BADI_SCD_ACCTG will be used to determine the correct G/L Account, Cost Center and Product Group based on Distribution and Mode of Transport. This BADI gets called only when a new Shipment Cost document get created.
Once the BADI determined the new values it populates field c_vfkn-sakto with the G/L account, field c_vfkn-kostl with the Cost Center and exports the Product group to memory.
There is no field on the Shipment Cost Document to store the Product group. Therefore another mechanism must be used to get the Product Group on the accounting document.
Business Event 1120P can be used to import the Product group out of memory and put it on BSEG-MATNR. Structure BSEG_SUBST must be enhanced with field MATNR for this purpose.
Function, Rules, Exits      Description of Functionality, Rules, Exits
BADI_SCD_ACCTG     Business Add-In for Shipment Cost Account Assignment
Business Framework     Business Event 1120P can be used to import the Product Group from memory and to populate field BSEG_SUBST-MATNR.
This event gets called from different places. It needs to be ensured that it only populates the value when it was called from BADI_SCD_ACCTG.
Custom Table     A look-up Table needs to be maintained for Distribution, Mode of Transport, G/L Account, Cost Center and Material Group
Transaction code     To maintain the new table
Append Structure     To enhance structure BSEG_SUBST with MATNR
      Business Add-In BADI_SCD_ACCTG can be used to determine the account assignments for a shipment cost item to set the G/L Account and Cost Center. All data needed to determine the new information gets provided in this BADI.
Logic:
     Determine if STO or SO based on Document Category from internal table I_REFOBJ-VTRLP field VGTYP If is C then Distribution type is Sales Order (Primary and Secondary Excluding Refinery 2 ) else we need to check the receiving plant. If the receiving plant (I_REFOBJ-VTRLK field WERKS) is a refinery the Distribution type is Primary (1) else its a (Primary and Secondary Excluding Refinery 2 ). Refineries can be identified via Function Module Z_M_GET_PLANTCLASSIFICATION. The plant must be passed into Import Parameter IP_SAPPLANT and field INT_PLANTCHAR-ATNAM must be looked up with value SAPTYPE. If it exists and field ATWRT contains RFY, the plant is a refinery.
     Product Group can be determined from the Material master through Material group field MARA-MATKL.
     Mode of Transport will be passed in the BADI in VTRLK-OIC_MOT.
     Select single entry from table ZTABLE1based on Distribution, Mode of Transport and Material Group. If nothing gets selected, error message No entry exists in table ZTABLE1for Distribution (distribution), MOT (MOT) & Mat. Group (material group) should be triggered.
     Move ZTABLE1-SAKNR to c_vfkn-sakto and ZTABLE1-KOSTL to c_vfkn-kostl
     The Material group must be exported to memory in BADI_SCD_ACCTG
     The Material group must be imported from memory in Business Event BP1120P
     Free Memory in Business Event BP1120P
This is VI01 Creation of Freight Cost Item screen

check the reply of ur Same Post .
regards
prabhu

Need help, MMC tree got deleted, very urgent.

Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from   Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
                    SID: DEV
                    NR: 00
                    StartProfile: (entire start profile path given)
                    user: devadm
                    passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.

siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM

Update Routine ... Help me Please--VERY URGENT

Hi All ,
I Moving data from Cube to ODS . Let me explain abt the records in the cube .
There are 6 key figures in the cube as well as dimensions, UNIQKEY TRANSACTION is One Dimension and ARTICLE is another dimension which is having an Navigational attribute called CORE ELEMENT.
I am showing the data with those two dimension and the key figures which are to be used in the routine.
Charc----
Key Figures
UNIQKEY-ARTICLE-Coreelement--
billqty
in base unit
A00N----1006330--1--
10.5
A00M -
1006320----2--
2.5
A00P-----1006330--1--
10.5
A00P-----1006320--2--
2.5
A00Q-----1006320--2--
2.5
A00Q-----1006340--3--
10.5
Now Lets see what the core element numbers mean,
core element 1 means -- fuel .
Core elemnet other 1 -- food .
I need to move these data into ODS Which will have an extra field called No of items in the transaction --ITEMS.For this i need to write a routine .
The Logic is ...
1.if Materail is of type 1(Means if the core element - 1)
I need to Populate the No of items in tnx = 1 .--ITEMS.
2.If Material is of type(Means if the core element)2or 3 I need to populate the billing quantity to the no of transcations.--ITEMS
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1 (replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the Transcation= 3
So the ODS Data should look like this.
UNIQKEY--billqty--
ITEMS
in base unit
A00N--10.5--
1
A00M--2.5--
2.5
A00P--13--
3.5
A00Q--13--
12.5
NOTE : IN the ODS only the UNIQKEY IS THE KEY FIELD and the rest are DATA FIELDS.
I Posted this one before also. But didnt get proper responses.
I am Pasting the piece of code which I have written . This code will work for the first two records in the cube , But it is failing for the UNIQKEY Transcation having Line items.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
       CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line   -
FORM compute_data_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
           RETURNCODE LIKE SY-SUBRC "Do not use!
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
        INTO CORE_ELEMENT
        from /BI0/PMATERIAL
        where
        material = COMM_STRUCTURE-material
        and OBJVERS <>'D'.
   IF CORE_ELEMENT EQ '1'.
   TITEMS = '1'.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
         input         = titems
      IMPORTING
        OUTPUT        = titems
   ELSE.
   TITEMS = COMM_STRUCTURE-BILL_QTY.
   ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
PLease give me ideas on how to acheive this . As I am not Aware of ABAP very well.. PLease try to give me the code. I hope one of you may got the same requirement before.
Its very urgent and I need to deliver it today itself.
Thanks in advance , you can mail me to [email protected]. If anybody intersted to discuss this Issue they can reach at +91 9845922955.

Hi ,
While I am moving the data from cube to ods . I need to create the update rules with cube -- 8cube . WHen i am doing this the billqty is a key figure in cube so that is not a problem but the ITEMS is not there in the cube ,SO for that I need to write a routine to populate that one.
Its strange but the user what to analyse with the UNIQKEY transaction. And these objects will be added as navigational attributes to the Characteristic. as it acts as another dimension.
He wants to laod these from ODS to Master data -Characteristic.
to say for each transcation hpw many items are getting sold.
Message was edited by: Nagarjuna Reddy
ONce again thanks for the qucik replies
Message was edited by: Nagarjuna Reddy

About Enjoy Transactions ------ Very Urgent

Similar Messages

Maybe you are looking for