About Error in Assigning Characterstics in Material Master

HI
This is lingaraj khilar.I am facing the problem in assigning characteristics in material master.I have created batch classification for a raw material.After assigning the classification when i am gng to assign characterstics it has shown the error "Characteristic AGI_CAST_PC cannot be used for proportion or product units"
with Message No Message no. LB123.Here AGi_CAST is classification.So I want to revert back with solution.
Regards
Lingaraj Khilar

Hi,
I believe that you are trying to use the classification functionality in your material, fine
find the procedure and cross chekc whether you have used the same.
1. Define the charateristics and assign the value to it.
2. Define the class with class type 001.
3. Assign the charateristics tothe class.
4. use MM01/MM02> Classification--> Assign class Etc.
hope it helps..
manoj singh

Similar Messages

  • Account assignment group in material master

    Dear Gurus,
    In material master basic view there is account assignment grp field. Earlier this field has the value for 03 semi finished goods and with this setting values the user where posting invoice. But the user wants to change this field value from 03 semi finished goods to 01 trading goods for some specific reason.
    The moment you change this value from 03 to 01, system is giving an error msg as incorrect account assignment group in material master.
    Regards,
    Prashanth Pai

    Check this link http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/account-assignment-group-2207835

  • Error while trying to change Material master

    Hi ,
    I am getting following error when I am trying to Change material master thru Tcode MM02
    "Required parameter missing when calling up module MARA_SINGLE_READ"
    In fact , I also couldn't select this Material in Purchase order .Error which i am getting is "Faulty Material"
    Could anyone pls help me.
    Regards
    Sandeep marwha

    I created a new material also , but for that also I am getting same error.
    Regards
    Sandeep

  • Error during Mass Maintenance of Material Master

    Dear All SAP guru,
    During mass maintenance of order unit ( PCS) and variable order unit "1" (Active) from T-code MM17, system is giving one error message.
    Error Mess:  30000052280140 : Messages have been issued: number MASS000120000000 and notification No.:
    MK101.
    While system allowing automatically to log through MM90, but after puting the log no.: MASS000120000000, system is not execting.
    Pl suggest ....as conversation factor is also maintained in material master for this.
    Regards,
    Pinku.

    HI ,
    check note 487111.
    According to this note
    Symptom
    In the planning data mass maintenance (MPGD_MASS), you select the "Conversion" field (UMREF) and enter the new value e.g. '2,01' and save the change. In the log of the mass maintenance, the system issues error
    MK101:
               ....... : Messages have been issued: number MASS............
    Detailed display of error message:
    Message number BF 020
               Value cannot be interpreted as a floating-point number. Other terms
    Reason and Prerequisites
    The problem is caused by a program error.
    The symptom occurs if during the maintenance of your own user profiles, you defined "Comma" for the decimal notation (Transaction SU3).
    Due to a program error, the system saves the value of the field to be changed program-internally in the exponential display with "Point" as the decimal place (2.01E+00).
    Solution :
    You have implement the solution mentioned in the note .
    Regards,
    Anupam

  • Cost center assignment based on material master

    Hi Experts:
    My client wants cost center assignment to be based on material master, for example, SAP system should be configured in a way that when costs arise due to a product price variance, then SAP should automatically post to the cost center for the specific brand instead of posting to only one default cost center. Is this really possible? In OKB9, I am only able to assign only one cost center to the GL account. Because of this, at the end of each month, the accountant manually allocates the costs from the overhead cost center to the respective cost centers for the brands which incurred this cost.
    Is it possible to configure SAP to detect that the cost belongs to product A therefore post this cost to Cost center for product A; or this cost belongs to product B therefore post this cost to cost center for product B?
    Your feedback is greatly appreciated.
    Thanks,
    Mariam.

    Hi,
    For your scenerio, try Derivative rule of Profit center. If you maintain Derivative rule for Profit center with product which is indirectly assigned to cost center.
    For example :
    Product A - Profit center1-cost center1
    productB- Profit center2- Cost center2
    Regards,
    Sreekanth

  • Runtime error in LSMW to create Material Master

    Hi all,
    I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
    "A RAISE statement in the program "SAPLMG25" raised the exception
    condition "NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated."
    I have checked all the steps of lsmw. Any idea why this specific error is coming?

    Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

  • Error in Purchasing tab of Material Master (MM02)

    When we select views, Basic Data 1, 2 & Purchasing in MM02, it is
    giving an error
    "Maintenance status of field MARA-LABOR does not correspond to status
    of screen E Message no. M3826 "
    One point, which we want to highlight, that this error is coming only
    with some user ids only. Authorisation is also ok. what could be the
    problem ?. we have checked all possible defaults & user parameters, but
    we are not getting any clue. Pl. resolve ...
    thanks
    amit

    Hi Amit,
    MARA-LABOR represents for Laboratory/design office. Therefore you have to check following customization settings in your system;
    (a) Goto transaction code OMS9
    (b) Enter 10 in Field Sel. Group
    (c) Select your Material Type
    (d) Make it Optional Entry
    Bye,
    Muralidhara

  • Exchange rate error in Material Master Upload (MB1C - 561)

    Hi.
    While uploading material through MB1C with movement type 561, I am getting following error
    My company code currency, material master currency is EUR but still following error is occuring.
    "Enter rate EUR / rate type M for 01.10.2010 in the system settings
    Message no. SG105
    Diagnosis
    For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
    Procedure
    Add the missing entry in the currency conversion table.
    Execute function
    You can then continue to process the commercial transaction."
    Why system is asking to maintain exchange rate for same currency?
    What are the settings that I should maintain? Thanks in advance.
    Regards
    Anand

    Hi,
    My material master currency is EUR
    Both Stock and Upload GL accounts currency is EUR
    Co COde currency is EUR
    Where else is the revevant Settings?
    Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
    25/Oct/2010 system is giving exchage rate error
    What could be the remedy?
    Regards
    Anand

  • Material Master data distribution using the Classifications

    Hi All,
    I am attempting to cater for a business scenario where we wish to distribute material master records via IDOCS by assigning a class to each material we wish to send out. 
    We have a new classtype (Z01) which is setup for distribution purposes (the status for this class type has been maintained).  I have defined a filter using classes in BD60.
    The next step was to setup the distribution model for my message type and partner.  I added the filter group in the distribution model for the message type (filter group "dependant on class membership").  The final step after generating the partner profile was to assign a new class that I created to the material master.
    We are using change pointers and BD21 to create the IDOCs.  I am managing to create the outbound IDOC but I am getting a 29 Status with an error message "Class type Z01 , receiving system ZFR001 : no list maintained".  ZFR001 is the name of the external partner.  The name of the class that has been assigned to the material master is also ZFR001.  There are no characteristics assigned to the class.
    Has anyone setup a similar scenario?  I'd appreciate any guidance as I have hit a bit of a wall.
    Best regards,
    James.

    Hi,
    The message type to send HR data is HRMD_A, i don't think that filtering this only message you achieve what you describe.
    In this message type, yo can define filters to send only the relevant infotypes that you need, but all of them will be send in the same idoc, for one employee.
    So I think to achieve what you want, you should create customer Message types (Z's) as reductions of HRMD_A standard message type and then in BD64 create one different Model for each one. So in each model you can put only the infotypes you want. You should very carefull with the updating in your destination system, because if you process all the message type at the same time, there will be a lot of blocking in employee objects.
    It is weird what you want to do, but this could be the solution.
    Regards,

  • Updation of Material Master Views

    Dear All,
    I am facing a design problem in creation of Material Master.
    A certain user group creates X,Y,Z views in MM01 , MM02 but the other views data which would be of relevance to other users needs to be updated based on certain conditions like Material Type etc.
    Eg : PLM user making Basic Data view .
           FI views and Sales View to be created automatically for other users.
    The issue is this <b>updation of data in other views</b> which is of two categories :
    i) if material type = 'abc'.
          MRP profile = 'fgh'.
    ii) if material type = literature.
       then plants = '1111', '2222' , '3333' etc....
    Regarding i):-
    This data can being updated in a user exit , eg '<b>MGA00001</b>'  called in MM01.
    But it <b>doesnot allow to change any other structure other than WMARA</b> where as we need to update data for WMARC, WMBEW, WMVKE etc.
    Regarding ii) :-
    How can I create material on <b>many plants while the material is under creation in MM01</b> ?
    How can i) and ii) be cracked ?
    Pls give solutions asap .
    Rewards are sure for helpful answers!!
    Regards,
    Shweta

    >
    zkarnalkar wrote:
    > Hi,
    >  I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    >
    > e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    >
    > regards,
    >  zafar
    To know the authorization objects of material master screen, check the following link on my blog
    http://aroopsnotepad.wordpress.com/2010/09/09/material-master-authorization/
    To find all authorization objects for a transaction, you can try SU22.
    Hope this helps.
    Regards,
    Aroop

  • Upload Material Master to non SAP Catalog

    Hi Guys,
    we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
    Are there reports available in the backend  (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
    Any hints are welcome!
    Thx
    Dieter

    Hi Dieter,
    Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
    Regards,
    Nikhil

  • Adding field in material master

    Hi All,
    I am trying to add field manufacture part number in material master. In field selection Manufacture part number (mara-mfrpn) field is optional. I checked the field selection group at material type level, transaction code field selection group (MM01.MM02,MM03) and Industry sector specific field selection, every where the fieild is optional but it is not coming up in material master. Please let me know if i m missing some config.
    Regards
    Chetan

    Hi Chetan,
    Use material type HERS.
    Also find the following link useful.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106f94ee-8dc2-2a10-a485-882871fa5c11?QuickLink=index&overridelayout=true
    Also from link http://help.sap.com/saphelp_470/helpdata/en/75/ee15c655c811d189900000e8322d00/content.htm
    some part is copied
    Create material master records
    If you work with MPNs, the number of manufacturers of a manufactured part corresponding to one of your firmu2019s own materials determines the number of material master records you have to create:
    If there is just one MPN corresponding to one of your firmu2019s own materials, you can enter it and the manufacturer directly in the master record for your own material. In this case, you need not create an MPN Material.
    If there are several MPN materials corresponding to one of your firmu2019s own materials, you must create MPN material master records with the material type HERS. In the Purchasing view, enter the manufacturer part number, the manufacturer (this can be either a vendor master record or a manufacturer master record), and your firmu2019s own, inventory-managed material.
    The MPN material master records are assigned to your firmu2019s own material. Stocks are managed with respect to the firmu2019s own material.
    0.8 cm steel bolts with a diameter of 0.5 cm are identified and stocked in your enterprise as the firmu2019s own, inventory-managed material RAW_S_08.
    The manufacturer Meyer & Co. sells these bolts under the number 8001 (the manufacturer part number). This information is stored in the MPN material master record S_MEYER.
    The manufacturer Smith Corp. supplies similar bolts under the number 4711. This information is stored in the MPN material master record S_SMITH.
    The MPN material master records S_MEYER and S_ SMITH are assigned to the material master record RAW_S_08.
    Hope it helps
    sBk

  • Material master views as per user

    Hi,
    I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    regards,
    zafar

    >
    zkarnalkar wrote:
    > Hi,
    >  I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    >
    > e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    >
    > regards,
    >  zafar
    To know the authorization objects of material master screen, check the following link on my blog
    http://aroopsnotepad.wordpress.com/2010/09/09/material-master-authorization/
    To find all authorization objects for a transaction, you can try SU22.
    Hope this helps.
    Regards,
    Aroop

  • Documentation on Delete Material Master Data

    Hi SAPers,
    Is there any documentation about the process of deleting a material master record?
    Regards,
    Miguel

    Please check these links:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/8d/3e59bc462a11d189000000e8323d3a/frameset.htm
    http://www.sap-img.com/bc003.htm

  • Material Master Number Range - Very Urgent

    Hi ,
    My client is having existing material codification as below :
    all material types for e.g. ROH, HALB, FERT will be starting their material code with 00 or 01 or 02 etc. sine the first two digits denotes the year , which will vary from material to material. The characters used will be from minimum 8 to maximum 14 - Alphanumeric.
    for e.g. my material code will be
    for ROH - 000040101F0101
    for FERT - 00801000101
    for HALB - 013000101C
    here for all materail type first 2 digit are for year and next will be prod. code , then assy , then sub assy , if forging applicable it will be F , if casting then - C
    How this can be mapped in SAP as one series for all material types, is it possible for system to identify the material type, what is advantage & disadvantage of the same.
    Pl. help
    Thanks & Regards,
    Vikas Mayekar.

    Hi
    Using Standard SAP for Material number ranges may not be able to map your requiremnts.
    But you can use the SAP enhancements available for the Number ranges determination & so onj...
    Please use the User exit in CMOD or SMOD
    You can use enhancement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
    For more information, see the documentation for the following components assigned to these enhancements:
    Industry
    EXIT_SAPLMG02_001
    EXIT_SAPLMG02_002
    Retail
    EXIT_SAPLMG72_001
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMG72_002
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMGNK_003
    Please take help of ABAPer's for implementing the same
    Thanks & Regards
    Kishore

Maybe you are looking for

  • [SOLVED] hdparm -S 241 no longer working

    Sometime in the last month, hdparm has stopped spinning down defined HDD's. I have a total of three HDD's in my system. Al rotating media. Two of those HDD's I use for backup, and as such are not needed for most of the day. In my rc.local I have: hdp

  • IPad push button not functioning, why?

    Along with issues that began with running my desktop and iPad through iTunes Match, I am now receiving an error message about inadequate local storage.  So, I deleted all my foldered emails, one-fourth of my songs, all my TV shows, all my movies, all

  • How to use RMI Stub class in programming?

    Hi all, I'm new on RMI. Is there anyone can explain to me how to use RMI Stub class which is generated by invoking rmic command? For my testing, I can only invoke rmi object nethod via its remote interface. Then what is stub used for when we are codi

  • When updating Adobe Muse 2014.3 I got the error: DF 015

    I try to make the latest update of Adobe Muse 2014.3 via creative clouds (member) I receive the error DF 015.

  • Trouble using USB keyboard with GarageBand

    I have a Yamaha DGX-305 keyboard with a USB out. I want to record the real instrument using GarageBand, rather than using MIDI input. Is this possible? GarageBand isn't recognizing the keyboard when I simply plug it in. I've downloaded what looks to