About FB01L, is it possible to post K,D,and OI accounts to specific ledger?

Dear gurus,
About FB01L, according to SAP libraray, it is not possible to post to K,D,or open item management based accounts to a specific ledger, like 0L, otherwise the system issue an error.
What I am wondering is that anyway to change the configuration in customizing to let it possible?
Right answers will be appreciated and rewarded.
Many thanks in advacne!

It will not be possible to post acct type K and D in the special purpose ledgers.
Thanks
Ashok

Similar Messages

FB01N-posting reconciliation account to specific ledger group

Dear all,
I wwould like to adjust certain customer/vendor account via FB01N with specific ledger group, however, I got an error message 'FAGL_POST_SERVICE 034, Postings to ledger ZL not permitted with account type D'.
would anyone know how to solve this problem? thanks.
Rgds,
Ben

Hi Ben,
Current design is that the account type S and non-open item managed accounts are allowed for FB50L. FB50L is designed to make 'adjustment' postings depending on the requirement for period-end closing operations. Open item managed accounts (including vendor, customer..) will be processed for clearing but clearing must be done for the leading ledger and also it doesn't give an option to make clearing only for the non-leading ledger.
Kind regards, Kyoko

RE:Possibility of posting 2 IR's for one GR

I have one issue related to a purchase order which consists of Service entry sheet.
In the PO history tab we are able to see 1 GR, 1 IR's and 1Service entries.
But the MB5S report shows the total of 2 GR'S and 1 IR's.
I could found the details of this PO in ME2N where there is
1( entry sheet 1000006054)                   Amount 1000 usd
1( GR =5000898940)   Amount 1000 usd and Total variance through IR Amount 1000 usd ( Total GR =2000 usd)
2 ( IR =5105627402 amt 1000     & 5105658726   Amount 2000 usd)
Here my concern is. How is it possible to post 2 IR's for one GR. Can anyone explain me about this.

Hi latha gaaru
Pls add me in   [email protected] (g-talk chat)
I will ask my MM consultant and get abck to u
regards
Arjuna

During PGI - Error - Posting only possible in periods 2006/12 and 2006/11

Hi,
I am a new to SAP.
I am testing creating sales order. While posting Goods Issue, I am getting error " Posting only possible in periods 2006/12 and 2006/11 in company code 1000"
I searched and got solutions in SDN- Forum as well as SAP best practice buidling blocks and tried but still the same error is appearing.
I tried the following:
1) Transaction code - OMSY - The details for company code 1000 is:
Year-Period-Fin Year - Period-Fin Year-LM
2006-12     -2006       - 11      -2005     -12
I modify this to Year to 2011- Period to 1-other fields not possible to modify and save, but the changes does not reflect when we open this screen again. It displsys old date.
2) Then I tried Transaction code - MMPV -
I enter the follwoing details
From Company code -1000
To Comnpany code -1000
Period
Year - I tried to enter from 01/2005 to 12/2010 and click execute, i am getting error mesasage that these are not current year.
If i enter 01/2011, it is going to next log page but with errror message that 01/2011 is not current year and 12/2006 is current year.
3) Then I tried - SPRO - Financial Accounting (NEW) ® Financial Accounting Global Settings (New) ® Ledgers ® Fiscal Year and Posting Periods ® Posting Periods ® Open and Close Posting Periods
and entered the follwing data and save.
Var. A    To account    From per. 1    Year    To period   Year    From per. 2    Year    To period    Year
1000 +                               1                 2000        12         2011     12                   2000     16            2011
1000 A    zzzzzzzzzz       1                 2000        12         2011     12                   2000     16            2011
1000 D    zzzzzzzzzz       1                 2000        12         2011     12                   2000     16            2011
1000 K    zzzzzzzzzz       1                 2000        12         2011     12                   2000     16            2011
1000 M    zzzzzzzzzz       1                 2000        12         2011     12                   2000     16            2011
1000 S    zzzzzzzzzz       1                 2000        12         2011     12                   2000     16            2011
Please suggest how to clear this error message.
Regards
Kasi

Dear Kasi
its not a problem if you are working on IDES.
Enter T code SE16N.
Enter table name MARV. Press enter.
Enter your company code in the required field. Press enter.
Enter   &SAP_EDIT   in the place where you entered the T code. Press enter. Now it is in edit mode.
Execute (click on Clock icon). A new screen appears.
Enter The Current Year: Current Month: Year of the previous Month: Previous month: Last year: Last month of the calendar year. As asked in the screen.
Press enter. Save and come outside.
Please do remember all the time period should be as per your system calendar.
Also do remember this is only workable when you are using IDES for education purpose only. Because skipping so many periods in between can cause problems when you are on real time scenario. Using MMPV is the standard procedure where you close the periods one by one.
Try it.
Update forum.
Pawan Sharma
Edited by: Pawan KS on Feb 10, 2011 12:33 PM

MR11 - possible to post to difference account?

Folks,
When using MR11 in combination with a moving average price, the system makes a reverse booking from the GR booking. However, the customer requires a that the moving average price should not be corrected. I.e.:
Current:
GR:
228000 - Trading goods + 10000,-
293000 - GR/IR clearing - 10000,-
MR11
228000 - Trading goods - 10000,-
293000 - GR/IR clearing + 10000,-
Desired:
GR:
228000 - Trading goods + 10000,-
293000 - GR/IR clearing - 10000,-
MR11:
XXXXX - Price differences + 10000,-
293000 - GR/IR clearing - 10000,-
Is this possible?
MZ

Hi
Its functionality is like that.
But try this one - go to FBKP - automatic postings - Goods/invoices receipt clearing - You can see two options goods delivered but not invoiced and invoiced but goods not delivered. Enter the GL accounts you wanted to post for MR11 and simulate the scenario.
Thanks

Posting only possible in periods 2002/03 and 2002/02 in company code 0001

All
This is in the ongoing sequence where I am creating everything from the scratch(customers, material, prices etc).So far, I have been able to create and save the salesorder>deliver it>pick the items and then I was going to carry out the PGI and then this happened.
when I use the date i.e(Planned GI) 27-09-2006, I receive the following error
****************snip********************
Goods movement: Error log
Item   Material           Description                                   Delivery qty UoM Batch
000010 9                  T-AS1_MATERIAL__9                                      10 PC
       E M7 053
       Posting only possible in periods 2002/03 and 2002/02 in company code 0001
************End snip*********************
If I use a date as R/3 wants ,say 27.02.2002(Planned GI),I get:-
"Picking date is after goods issue date"...which is obvious.
any day after 27-09-2006, say 28-09-2006(Planned GI), I get :-
"Goods issue date is later than delivery date"...makes sence too
one thing was clear here to me, I can only post in Feb/March 2002, while my delivery date is 27 Sept 2006 . So I am in a classic chicken-egg situation.
where and who is giving this "Posting only possible in periods 2002/03 and 2002/02 in company code 0001" message ? How can I override this thing from the past ?
I thought of playing it smart and change my system date to the year Feb. 2002 , but in the fear that a lot of other things will fall as a result of that, I did refrain from doing so.
Could someone make this PGI succesful for me
Thanks for any lessons.

Thanks Mr. Srinivas
MMPV was indeed the magic wand.
PGI was successful.
this is my overall document flow as of now :-
Standard Order 2                                27.09.06 Completed
. Outbound delivery 80000000                    27.09.06 Completed
.. WMS transfer order 1                         29.09.06 Completed
.. GD goods issue:delvy 4900000020              30.09.06 complete
.. Invoice 90000000                             30.09.06 Missing export data
As I understand, my invoicing is not yet complete , it's got a number and got saved, but how shall I get rid of that red line message "Missing export data"(foriegn trade data incomplete...was the message while saving the billing document).I would be darn happy if I could just get rid of the foreign data part completely(just want to complete the invoice).Would this be checking off a mandatory rqmt. somewhere in the master data?
and would this also be the reason, why I see no accounting document which should have been on status 'open' by now ?
Thanks in advance ,

Posting only possible in periods 2011/11 and 2011/10 in company code 4000

Hi All Experts,
I have encountered with this error while doing MIGO.
Posting only possible in periods 2011/11 and 2011/10 in company code 4000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed.
I have checked OB52, OB29, OB37, MMPV, MMRV. All possible T.codes and threads I tried from SDN itself, still no luck ! In OB52 I have opened 2011 & 2012 year open absolute.
Would like to share MMRV settings :-
Current Period : 11 / 2011
Previous Period : 10 / 2011
Last period in prev year : 12 / 2010
We have India based client so fiscal year variant is Apr to March copied from V3.
Will be very much appreciable experts guidane !
Regards,
Sharvari Joshi.

Hi All Experts,
I raised the OSS, and here which I got the reply from SAP.
There is a possibility to run the report RMMMINIT to initialize posting
periods. Please bear in mind that the valuation data of the previous
period could get affected.
If you decide to proceed with the process, please review the
documentation of program RMMMINIT.
Please also review attached note 70545 regarding the initialization
process. Although this note is NOT valid for your release, it provides
good information on the use of initialization for correction purposes.
Additionally, please review attached note 369637 in this regard as well.
PLEASE FIRST PERFORM THIS IN A TEST/DEVELOPMENT SYSTEM PRIOR TO MOVING
TO PRODUCTION AS YOUR VALUATION DATA FROM PREVIOUS PERIOD WILL BE
AFFECTED. If you are satisfied with the results, then you can move it
to production. Please perform this at your own risk as this hotline
will not support any problems arising out of it.
Related the error message MM016 please follow the steps from note
487381:
To reserve the parameter use transaction SU01 for the user's name who
executes the RMMMINIT program. The parameter must be set as follows:
Parameter Value
MMPI_READ_NOTE YYYYMMDD (for the current date)
I am not able make out any meaning out of it. Can anyone please understand me this ?
Help will be appreciated !
Reagrds,
Sharvari Joshi.
P.S : Steps from my side which I performed , I changed the parameters for my ID in SU01 to current date 2011.11.16 (YYYYMMDD) and running MMPI still same error.

Why would it state under the "more about this mac" that i already have10.8.3 and then in the app store say i need to "resume" do you know what i mean? is it possible i already did download mountain lion entirely once? I am confused and don't want it twice

why would it state under the "more about this mac" that i already have10.8.3 and then in the app store say i need to "resume" do you know what i mean? is it possible i already did download mountain lion entirely once? I am confused and don't want it twice

This is cause by the way the App Store checks to see if an application is installed on your system.
Basically when an app is installed it is in the Applications folder and this is where the MAS looks for them. So it looks at your purchase history for the apps you bought and looks in the Applications folder to see if they are installed. If an app is in your purchase history but not in the Applications folder the MAS says you need to install it.
For normal apps this works fine but the OS doesn;t install into the Applications folder. So the MAS sees you have Mountain Lion in your purchase history but it's not in the Applications folder and so it says you need to download it.
Hopefully one of these days Apple wil fix this.
regards

KO88:Not possible to post down payment clearing. There are no down payments

Hi,
We are doing Full Settlement of an order in TCode KO88. There are few Down payments against a PO. Initially, system gave an error as follows: -
You cannot post comp.retirement for asset 120002 0 with this trans.type
    Message no. AA341
Diagnosis
    A down payment was posted to asset 120002 0. In depreciation area 01, if
    not elsewhere, all down payments were not cleared.
Procedure
    Before posting a complete retirement on this asset, you have to first
    clear the down payment in all depreciation areas.
We cleared the down payments and ran KO88 again, but a new error popped as given below.
Not possible to post down payment clearing. There are no down payments.
    Message no. AA571
Any help will be acclaimed.
Regards,
CMC Team
Edited by: CMC Team on Jan 18, 2012 2:59 PM
Edited by: CMC Team on Jan 18, 2012 3:01 PM

Friend,
Probably you did not take the trouble to search the SAP Oss for notes on this error message.
Please search for 'AA571' in the notes section of SAP oss and you will find several notes addressing the exact issue you are having.
For your convenience.
www.service.sap.com/notes
Best regards,
Vishal Thakur.

Not possible to post down payment clearing. There are no down payments:CJ88

Hi Experts,
When I settle WBS Element cost to the Asset Under Construction using transaction CJ88, I receive following error.
AA571 Not possible to post down payment clearing. There are no down payments.
Please help.
Thank You.

Hi,
first please check if the message AA 571 is right:
- Please check table ANLC. If ANLC-KANZA + ANLC-ANSAZ < 0    AA 571
- Check asset values (AW01N, ANEP, ANLC) and find out where the negative down payments come from (tty 180, 181)
However, in some cases a negative down payment balance cannot be avoided (for example through translation differences in foreign currency areas). This is the problem of AA 571. Sometimes it is not justified. For this
cases we have the following note:
860038 Error AA571 not justified
Using SM30, for the T100S table, create an entry for the message
class AA, message number 571, allowed message type "AEW" and
standard message type "E". Select the entry as 'Switch off'.
If when you post to a fixed asset the down payments are negative, or
become negative through the posting, you continue to receive an error as
a default with these changes.
Recommended procedure:
o Change this message to a warning message for one or several
       special users. This user should then be used to post to any such
       fixed asset that has down payments that are already negative or
       become negative through posting.
o This should only be permitted in the cases where a negative down
       payment balance cannot be avoided due to foreign currency
       rounding.
regards Bernhard
Edited by: Bernhard Kirchner on Feb 11, 2011 9:27 AM

Error: Not possible to post down payment clearing.There are no down payment

Hi expert,
I am running a settlement for an internal order and encounter the following error message.
"Not possible to post down payment clearing. There are no down payments."
Message no. AA571
When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
The downpayment acct is currently zero.
Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
Kindly advise what is the cause and the method to resolved this asap.
Thanks.
Angel.

Hi Angel ,
My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
Error Message:Not Possible to post down payment clearing .There are no down payments.
Message: AA571
If your issue is solved.
please can you tell how did you solve this issue.
Thanks,

I am trying to set up my college email on my phone, but it says it can't verify my account. I have tried just about every server name possible and I don't know what to do. Help?

I am trying to set up my college email on my phone, but it says it can't verify my account. I have tried just about every server name possible and I don't know what to do. Help?

Yes. Check your student manual or contact your help desk.

E not possible to post down payment clearing.

Dear all sap guru's
iam getting this meg:
could you explaine me?
document XXXX E not possible to post down payment clearing. there are no downpayment.
regs
laks

Hi Lakshmi,
Give some clarity for your issue.
Which t.code ur using
and check it downpayment is in the open item or not.
giv me the reply i will update you

Is it possible to post docs to Dummy profit center

Hi friends,
Is it possible to post FI docs to dummy profit center.
Posting for customer document.
Customer Dr
Bank Account Cr.
system is not allowing to post document with dummy profit center.
If I post document without any proft center, It is giving Balancing field error, no profit center could be determined.
Regards,
Suresh

Hi
In your posting, there are no profit centre assignment to both accounts. For customer, you cannot assign a profit centre. But for Bank account, you can assign a default profit centre. In new GL, you can assign a profit centre to your GL account per company code:
F.A new ->GL a/c new -> Master data -> Profit centre -> Assign default profit centre to accounts

Could it possible to post Recurring Journal entry every day?

Hi Experts
Could it possible to post Recurring Journal entry every day?
Please provide the configuration steps.
Note: Defined Document type and number range,
In FBD1 , when I try post the entry, showing only monthly intervals.
Thanks in advance
Srinath

Hi Srinat,
Please try with Run Date and Run Schedule, T.code OBC1 and OBC2:
Run Schedule for Recurring Entries
Plan which contains the required run dates for recurring entry original documents. Using the run schedule, accounting documents can be created from recurring entry original documents at any intervals.
Procedure
Specify the run schedule by which the recurring entry original document is to be carried out. Alternatively, you can specify the run by specifying an interval in months and a run day.
If you use a run schedule, you must have defined this previously in the Financial Accounting configuration. In addition, make sure that the recurring entry program is carried out as often as appropriate and with the suitable parameters. For a run schedule with weekly dates, for example, the recurring entry program must also be started weekly.
Regards
Javed

About FB01L, is it possible to post K,D,and OI accounts to specific ledger?

Similar Messages

Maybe you are looking for