About fcntl()
hi,
i wanted to know that does Solaris O.S has F_Notify flag in fcntl() to monitor if the files In a Directiory are changed(created,modified,deleted).
Moreover I would like to ask that, is there an way to find out which file(name of the file) has been changed in a directory.basically that directory is liked with network & it's contents are changed randomly.
Thank you.
Thanks John Galt,
I will do that. Hopfully there will be not compatibility issues. A-NmN.
Similar Messages
-
Complaints about /usr/bin/vacation in logs
I'm seeing complaints about not being able to call the vacation binary in my logs, and I really can't figure out what is calling it or why. Below is an example from the smtp log (taking out the domains to protect the innocent):
Feb 23 09:18:44 mail postfix/qmgr[70323]: 9FD95341410: from=<VernonquadricChavez@*.com>, size=2075, nrcpt=1 (queue active)
Feb 23 09:18:44 mail postfix/pipe[96158]: 9FD95341410: to=<steve@*.com>, orig_to=<steve@mail.*.us>, relay=cyrus, delay=1191, delays=1191/0.21/0/0.03, dsn=2.0.0, status=sent (delivered via cyrus service)
Feb 23 09:18:44 mail postfix/local[96156]: 9FD95341410: to=<steve@mail.*.us>, relay=local, delay=1191, delays=1191/0.21/0/0.03, dsn=4.3.0, status=deferred (temporary failure. Command output: local: fatal: execvp /usr/bin/vacation: No such file or directory )
And my postconf -e output:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/postfix/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
broken_sasl_auth_clients = no
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
canonical_maps =
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred, defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_host_lookup = dns
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_enable = no
lmtp_sasl_mechanism_filter =
lmtp_sasl_password_maps =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 5
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20070531
mail_spool_directory = /var/mail
mail_version = 2.4.3
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 0
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,My-Mail-Server.local,...all my domains
mydomain = maindomain.us
mydomain_fallback = localhost
myhostname = mail.maindomain.us
mynetworks = 127.0.0.1/32,64.78.236.101/32
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_bind_address6 =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = no
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,cram-md5,plain,gssapi
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file = /etc/certificates/Default.crt
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_key_file = /etc/certificates/Default.key
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = yes
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = /dev/random
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = hash:/etc/postfix/virtual
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = hash:/etc/postfix/virtual_domains
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtual_uid_maps =I'm seeing complaints about not being able to call the vacation binary in my logs, and I really can't figure out what is calling it or why. Below is an example from the smtp log (taking out the domains to protect the innocent):
Feb 23 09:18:44 mail postfix/qmgr[70323]: 9FD95341410: from=<VernonquadricChavez@*.com>, size=2075, nrcpt=1 (queue active)
Feb 23 09:18:44 mail postfix/pipe[96158]: 9FD95341410: to=<steve@*.com>, orig_to=<steve@mail.*.us>, relay=cyrus, delay=1191, delays=1191/0.21/0/0.03, dsn=2.0.0, status=sent (delivered via cyrus service)
Feb 23 09:18:44 mail postfix/local[96156]: 9FD95341410: to=<steve@mail.*.us>, relay=local, delay=1191, delays=1191/0.21/0/0.03, dsn=4.3.0, status=deferred (temporary failure. Command output: local: fatal: execvp /usr/bin/vacation: No such file or directory )
And my postconf -e output:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/postfix/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
broken_sasl_auth_clients = no
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
canonical_maps =
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred, defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_host_lookup = dns
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_enable = no
lmtp_sasl_mechanism_filter =
lmtp_sasl_password_maps =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 5
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20070531
mail_spool_directory = /var/mail
mail_version = 2.4.3
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 0
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,My-Mail-Server.local,...all my domains
mydomain = maindomain.us
mydomain_fallback = localhost
myhostname = mail.maindomain.us
mynetworks = 127.0.0.1/32,64.78.236.101/32
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_bind_address6 =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = no
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,cram-md5,plain,gssapi
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file = /etc/certificates/Default.crt
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_key_file = /etc/certificates/Default.key
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = yes
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = /dev/random
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = hash:/etc/postfix/virtual
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = hash:/etc/postfix/virtual_domains
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtual_uid_maps = -
Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate. -
A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.
-
ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
im not the best technically minded but i just dont see what im doing wrong here, please helpPerhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps -
Vendor payments and debts about an asset
Dear sap colleages
I need to know these information about an ASSET:
Purchased orders,
Items from purchase orders,
which of these items i've received, i've paid (also date), i've not paid ( amount of debt related to asset)
payments in advanced (date),
wich of these payments have been cleared (clearing date) and wich not,
who is the vendor,
other expenses (such as delivery)
the amount of taxes,
invoices related and NOT RELATED TO purchase order
payments without invoice
Which transactions do i need to follow?
or
Which document flow?
or
Which tables? Wich keys?
or
Is there a standard report that can give me such information?
Any documentation and/or code will be appreciated.
I need to program a report to integrate all these information.
Thanks and Kind RegardsHi,
Refer to T.code AW01N - Asset Explorer .
Additionally you cna also refer to SAP Standard reports in Asset Accounting
Accounting - Financial Accounting - Fixed Assets - Information System - Reports on Asset Accounting
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt -
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
Doubt about report FBL5N of screen field:Open items and Cleared items
hi
i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
but i don't know to differentiate Open Items and Cleared items in this report.
Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
or they must be calc in program ? if true what about calc rules?
waiting for help! thank you!Hi,
Here is the difference in Open Items and Cleared Items.
In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
Hope this helps.
ashish
Message was edited by:
Ashish Gundawar -
Follow up on an old thread about memory utilization
This thread was active a few months ago, unfortunately its taken me until now
for me to have enough spare time to craft a response.
From: SMTP%"[email protected]" 3-SEP-1996 16:52:00.72
To: [email protected]
CC:
Subj: Re: memory utilization
As a general rule, I would agree that memory utilzation problems tend to be
developer-induced. I believe that is generally true for most development
environments. However, this developer was having a little trouble finding
out how NOT to induce them. After scouring the documentation for any
references to object destructors, or clearing memory, or garbage collection,
or freeing objects, or anything else we could think of, all we found was how
to clear the rows from an Array object. We did find some reference to
setting the object to NIL, but no indication that this was necessary for the
memory to be freed.
I believe the documentation, and probably some Tech-Notes, address the issue of
freeing memory.
Automatic memory management frees a memory object when no references to the
memory
object exist. Since references are the reason that a memory object lives,
removing
the references is the only way that memory objects can be freed. This is why the
manuals and Tech-Notes talk about setting references to NIL (I.E. freeing memory
in an automatic system is done by NILing references and not by calling freeing
routines.) This is not an absolute requirement (as you have probably noticed
that
most things are freed even without setting references to NIL) but it accelerates
the freeing of 'dead' objects and reduces the memory utilization because it
tends
to carry around less 'dead' objects.
It is my understanding that in this environment, the development tool
(Forte') claims to handle memory utilization and garbage collection for you.
If that is the case, then it is my opinion that it shoud be nearly
impossible for the developer to create memory-leakage problems without going
outside the tool and allocating the memory directly. If that is not the
case, then we should have destructor methods available to us so that we can
handle them correctly. I know when I am finished with an object, and I
would have no problem calling a "destroy" or "cleanup" method. In fact, I
would prefer that to just wondering if Forte' will take care of it for me.
It is actually quite easy to create memory leaks. Here are some examples:
Have a heap attribute in a service object. Keep inserting things into
the heap and never take them out (I.E. forgot to take them out). Since
service objects are always live, everything in the heap is also live.
Have an exception handler that catches exceptions and doesn't do
anything
with the error manager stack (I.E. it doesn't call task.ErrMgr.Clear).
If the handler is activated repeatedly in the same task, the stack of
exceptions will grow until you run out of memory or the task terminates
(task termination empties the error manager stack.)
It seems to me that this is a weakness in the tool that should be addressed.
Does anyone else have any opinions on this subject?
Actually, the implementation of the advanced features supported by the Forte
product
results in some complications in areas that can be hard to explain. Memory
management
happens to be one of the areas most effected. A precise explanation to a
non-deterministic process is not possible, but the following attempts to
explain the
source of the non-determinism.
o The ability to call from compiled C++ to interpreted TOOL and back
to compiled C++.
This single ability causes most of the strange effects mentioned in
this thread.
For C++ code the location of all variables local to a method is not
know
(I.E. C++ compilers can't tell you at run-time what is a variable
and what
isn't.) We use the pessimistic assumption that anything that looks
like a
reference to a memory object is a reference to a memory object. For
interpreted
TOOL code the interpreter has exact knowledge of what is a reference
and what
isn't. But the TOOL interpreter is itself a C++ method. This means
that any
any memory objects referenced by the interpreter during the
execution of TOOL
code could be stored in local variables in the interpreter. The TOOL
interpreter
runs until the TOOL code returns or the TOOL code calls into C++.
This means
that many levels of nested TOOL code can be the source of values
assigned to
local variables in the TOOL interpreter.
This is the complicated reason that answers the question: Why doesn't a
variable that is created and only used in a TOOL method that has
returned
get freed? It is likely that the variable is referenced by local
variables
in the TOOL interpreter method. This is also why setting the
variable to NIL
before returning doesn't seem to help. If the variable in question is a
Array than invoke Clear() on the Array seems to help, because even
though the
Array is still live the objects referenced by the Array have less
references.
The other common occurrence of this effect is in a TextData that
contains a
large string. In this case, invoking SetAllocatedSize(0) can be used
to NIL
the reference to the memory object that actually holds the sequence of
characters. Compositions of Arrays and TextData's (I.E. a Array of
TextData's
that all have large TextDatas.) can lead to even more problems.
When the TOOL code is turned into a compiled partition this effect
is not
noticed because the TOOL interpreter doesn't come into play and
things execute
the way most people expect. This is one area that we try to improve
upon, but it is complicated by the 15 different platforms, and thus
C++ compilers,
that we support. Changes that work on some machines behave
differently on other
machines. At this point in time, it occasionally still requires that
a TOOL
programmer actively address problems. Obviously we try to reduce
this need over
time.
o Automatic memory management for C++ with support for multi-processor
threads.
Supporting automatic memory management for C++ is something that is
not a very
common feature. It requires a coding standard that defines what is
acceptable and
what isn't. Additionally, supporting multi-processor threads adds
its own set of
complications. Luckily TOOL users are insulated from this because
the TOOL to C++
code generator knows the coding standard. In the end you are
impacted by the C++
compiler and possibly the differences that occur between different
compilers and/or
different processors (I.E. Intel X86 versus Alpha.) We have seen
applications that
had memory utilization differences of up to 2:1.
There are two primary sources of differences.
The first source is how compilers deal with dead assignments. The
typical TOOL
fragment that is being memory manager friendly might perform the
following:
temp : SomeObject = new;
... // Use someObject
temp = NIL;
return;
When this is translated to C++ it looks very similar in that temp
will be assigned the
value NULL. Most compilers are smart enough to notice that 'temp' is
never used again
because the method is going to return immediately. So they skip
setting 'temp' to NULL.
In this case it should be harmless that the statement was ignored
(see next example for a different variation.) In more
complicated examples that involve loops (especially long
lived event loops) a missed NIL assignment can lead to leaking the
memory object whose
reference didn't get set to NIL (incidentally this is the type of
problem that causes
the TOOL interpreter to leak references.)
The second source is a complicated interaction caused by history of
method invocations.
Consider the following:
Method A() invokes method B() which invokes method C().
Method C() allocates a temporary TextData, invokes
SetAllocatedSize(1000000)
does some more work and then returns.
Method B() returns.
Method A() now invokes method D().
Method D() allocates something that cause the memory manager to look
for memory objects to free.
Now, even though we have returned out of method C() we have starting
invoking
methods. This causes us to use re-use portions of the C++ stack used to
maintain the history of method invocation and space for local variables.
There is some probability that the reference to the 'temporary' TextData
will now be visible to the memory manager because it was not overwritten
by the invocation of D() or anything invoked by method D().
This example answers questions of the form: Why does setting a local
variable to
NIL and returning and then invoking task.Part.Os.RecoverMemory not
cause the
object referenced by the local variable to be freed?
In most cases these effects cause memory utilization to be slightly
higher
than expected (in well behaved cases it's less than 5%.) This is a small
price to pay for the advantages of automatic memory management.
An object-oriented programming style supported by automatic memory
management makes it
easy to extended existing objects or sets of objects by composition.
For example:
Method A() calls method B() to get the next record from the
database. Method B()
is used because we always get records, objects, of a certain
type from
method B() so that we can reuse code.
Method A() enters each row into a hash table so that it can
implement a cache
of the last N records seen.
Method A() returns the record to its caller.
With manual memory management there would have to be some interface
that allows
Method A() and/or the caller of A() to free the record. This
requires
that the programmer have a lot more knowledge about the
various projects
and classes that make up the application. If freeing doesn'
happen you
have a memory leak, if you free something while its still
being used the
results are unpredictable and most often fatal.
With automatic memory management, method A() can 'free' its
reference by removing
the reference from the hash table. The caller can 'free' its
reference by
either setting the reference to NIL or getting another
record and referring
to the new record instead of the old record.
Unfortunately, this convenience and power doesn't come for free. Consider
the following,
which comes from the Forte' run-time system:
A Window-class object is a very complex beast. It is composed of two
primary parts:
the UserWindow object which contains the variables declared by the
user, and the
Window object which contains the object representation of the window
created in
the window workshop. The UserWindow and the Window reference each
other. The Window
references the Menu and each Widget placed on the Window directly. A
compound Window
object, like a Panel, can also have objects place in itself. These
are typically
called the children. Each of the children also has to know the
identity of it's
Mom so they refer to there parent object. It should be reasonably
obvious that
starting from any object that make up the window any other object
can be found.
This means that if the memory manager finds a reference to any
object in the Window
it can also find all other objects in the window. Now if a reference
to any object
in the Window can be found on the program stack, all objects in the
window can
also be found. Since there are so many objects and the work involved
in displaying
a window can be very complicated (I.E. the automatic geometry
management that
layouts the window when it is first opened or resized.) there are
potentially many
different reference that would cause the same problem. This leads to
a higher than
normal probability that a reference exists that can cause the whole
set of Window
objects to not be freed.
We solved this problem in the following fashion:
Added a new Method called RecycleMemory() on UserWindow.
Documented that when a window is not going to be used again
that it is
preferably that RecycleMemory() is invoked instead
of Close().
The RecycleMemory() method basically sets all references
from parent to
child to NIL and sets all references from child to
parent to NIL.
Thus all objects are isolated from other objects
that make up
the window.
Changed a few methods on UserWindow, like Open(), to check
if the caller
is trying to open a recycled window and throw an
exception.
This was feasible because the code to traverse the parent/child
relationship
ready existed and was being used at close time to perform other
bookkeeping
operations on each of the Widgets.
To summarize:
Automatic memory management is less error prone and more productive but
doesn't come totally for free.
There are things that the programmer can do that assists the memory
manager:
o Set object reference to NIL when known to be correct (this
is the
way the memory is deallocated in an automatic system.)
o Use methods like Clear() on Array and SetAllocatedSize()
on TextData to
that allow these objects to set their internal
references to NIL
when known to be correct.
o Use the RecycleMemory() method on windows, especially very
complicated
windows.
o Build similar type of methods into your own objects when
needed.
o If you build highly connected structures that are very
large in the
number of object involved think that how it might be
broken
apart gracefully (it defeats some of the purpose of
automatic
management to go to great lengths to deal with the
problem.)
o Since program stacks are the source of the 'noise'
references, try
and do things with less tasks (this was one of the
reasons that
we implemented event handlers so that a single task
can control
many different windows.)
Even after doing all this its easy to still have a problem.
Internally we have
access to special tools that can help point at the problem so that
it can be
solved. We are attempting to give users UNSUPPORTED access to these
tools for
Release 3. This should allow users to more easily diagnose problems.
It also
tends to enlighten one about how things are structured and/or point out
inconsistencies that are the source of known/unknown bugs.
Derek
Derek Frankforth [email protected]
Forte Software Inc. [email protected]
1800 Harrison St. +510.869.3407
Oakland CA, 94612I beleive he means to reformat it like a floppy disk.
Go into My Computer, Locate the drive letter associated with your iPod(normally says iPod in it, and shows under removable storage).
Right click on it and choose format - make sure to not have the "quick format" option checked. Then let it format.
If that doesnt work, There are steps somewhere in the 5th gen forum( dont have the link off hand) to try to use the usbstor.sys to update the USB drivers for the Nano/5th gen. -
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
I think Apple should be a bit more cautionary about iCloud and privacy. My family shares the same iCloud account as we all enjoy the music we collectively purchase on iTunes; we paid Apple for this feature with some kind of grouped account. We didn't know, however that this joins our devices so that iMessages, contacts, pictures and just about everything else is shared too. The unprivate default seems to be to share everything between all devices vs. to allow access by exception or by choice (or by password?). Sure, when my kids get all my texts I can go figure out why and fix it but that is in my mind the antithesis of privacy and could be quite embarrassing for any family. I guess it is good for stalking the kids or parents though if they don't know about the partyline approach to privacy. Maybe a tech solution would be to have the iPhone show somehow the extent of its audience to its user.
No argument from me about the vagaries of using and sharing Apple IDs. This can lead to unintended consequences, especially in a family situation.
If you're sharing the same ID for FaceTime, you might want to go to Settings>FaceTime, tap the ID, sign out, then sign in with separate IDs there too. Otherwise, you'll end up getting each other's FaceTime calls.
Also, if you need to migrate everyone's devices to separate iCloud accounts to keep your synced data separated, you can do this by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. Once everyone's devices are on separate accounts, you can go to icloud.com and delete each other's data from your accounts. -
A Family Apple ID issue nobody seems to be talking about.
I've read all the threads about multiple Apple ID's and sharing an iTunes account within a family in the new ios5 world with iCloud. But there's another issue I don't think Apple is considering.
Kids grow up. And when they do, you want them to pay for their own iTunes, etc! My younger son still uses my iTunes apple ID, but a couple years ago, my older one made a new one with a new ID as soon as he was able to have his own credit card. That means he has TWO iTunes ID's, that together, with combined purchases, make up his music library.
Pre-iOS5 it has not been an issue. His computer is authorized to play songs from both accounts. But what about when he goes to iOS5 and Lion and iCloud? He will no longer be able to have his library all together in one place. This means burning thousands of songs, losing the name of the artist/song, in the process, or... I don't know what.
Sooner or later, I want my younger son to have his own credit card and buy HIS own songs/apps. But the only way his entire library can be together in the cloud is if I keep paying for them on MY account.
Please make a fix for this, Apple. Let us have a family account and associated family member accounts that allow for kids growing up! Am I missing something?ddizzd,
You're not addressing Apple here, only other users just like yourself. You're just wasting your time and breath on this forum. You need to post here: http://www.apple.com/feedback/iphone.html -
I only sign in to iTunes' store about once a week or so. But during each of my last 3 attempts (on different days, several days apart) on my first attempt to enter my password and hit submit, I am immediately told that my Apple account has been locked for security reasons and it wants to take me to a page to reset my 'forgotten' password. I am using the CORRECT password.
Perhaps someone else is trying to break into my account or is mis-entering theirs but my account should not be getting locked like this. It is very frustrating to have to go through the reset password procedure each and every time I want to go into the store. It seems to me that Apple really doesn't want me to buy any more apps from them as they keep refusing me entry into my own account, each and every time I have tried to use it, for the past few weeks. I am not their best customer, but they aren't giving me much of a welcome invitation to become one, if I'm going to be treated like this.
I just bought my iPhone 4 less than 2 months ago. I paid extra money to upgrade early, just to get this phone because it was so highly recommended by everyone I spoke with in different stores (BestBuy and Verizon). I even bought the 2 year upgrade to my Apple services in case I needed to ever call them, and so far I haven't had to, yet. But I definitely will call them if this isn't straightened out.
It looks like this other user could be tracked and an email could be sent to them from Apple to let them know what they are doing - trying to sign into the wrong account, and are locking somebody else out of their own account because of their error....and to remind them of their correct information or how to get it and to write it down or save it somewhere so they don't keep on doing this.
I have seen literally DOZENS of other people in these discussions with exactly the same issue that I'm having so it is NOT an isolated incident, and it seems to be a growing problem as Apple's sales and user base continues to grow, so this problem is seriously needing to be addressed in some way, and soon, before they start losing new customers because of it. If I was still within my original 14 day return period with this phone, I would definitely be returning it and buying an Android model because of how frustrating this is to me. If my bank was doing this to me, I'd have already switched banks by now if they hadn't fixed it - just to give an example of how I feel about this.For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
I'm in the trial period for Creative Cloud - I have about 19 days to go on Photoshop CC on my iMac. Can I use the same CC trial on a second machine? Specifically on a Windows 7 machine?
Nothing personal to you or Rajshee, but this is exactly why I absolutely despise these "community forums" (not just Adobe but any company). I called the Tech Support phone line today after digging and digging for a phone number, and they told me the exact opposite, and they did it a lot faster than it was possible to get a forum response. (That's really not personal, because you can't control that, but it's a fact.)
Their answer: As long as I'm signed in with the same ID, I can try, say, Photoshop CC on my iMac at home and also try Acrobat Pro CC on my Windows 7 machine at work. Same account, same login, one trial.
This makes complete sense to me as I'm financially on the hook (potentially) for the same package. If I give away my login to someone else, which I wouldn't do, I'm still on the hook. This is why the cloud approach to software is such genius and I applaud it.
BTW, 99% of the "community forum" wrong answers come on Microsoft sites, so don't feel bad.
Maybe you are looking for
-
I created a BSP with the following values. Staff Contractor Staff/Contractor Role Staff/Contractor No Name Contact No staff/contractor : radiobutton Staff/Contractor Role -char 40 Staff/Contractor No -char10 Name - char40 Contact No
-
Flash content won't play if HTML is in a different directory
I have a flash CS3 slideshow that loads it's content from an external .xml file. If I export the HTML it plays fine, but if I move the HTML to the site root directory and let dreamweaver update the links the flash slideshow will not play. my site is
-
Transitions with video in Keynote
I have a problem with longer videos playing in keynote .... the page transitions through to the next page before the video completes ... Any ideas ??
-
Just ring bt This is what the answer was
I contacted bt to see about infinity they say yes sir it should be available between now in may does this mean it will end up may 2015 or are we getting close to going live i spoke to bt engineer and he said all the cabinets have power to them now
-
Support on Kinect for Windows V2
We've purchased Kinect Windows V2 and we are trying to find x,y,z real co-ordinates of a point. The method given in the sample guide is 'MapcolourframetoCameraspace'. This method takes the argument Array<CameraSpacePoint>^ cameraSpacePoints What is t