About fi-sl,co-pa extractions

is it possible to load master data through fi-sl and co-pa extractions?

hi NewBW,
take a look
CO-PA
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-SL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
Differences between LIS,LO,CO/PA and FI-SL extractors
hope this helps.

Similar Messages

I need an information about sap-bw(retail)in extraction

hi friends
just i m new sap bw so please i need to no an detail information about
sap-bw(retail)in extraction could please any one help me
urs
naveen

Hi,
Check the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9
Regards,
®

Give me details about differrent views in generic extraction give details

give me details about differrent views in generic extraction give details such as database view, projection view, help view, etc please give detail

Dear Deba,
Projection view - Just retrieves some fields from a single table.
Help View - This is used for search help.
Database View - This is inner join view of one or more tables
Maintenance View - Helps in creating maintaining data of the application object. The data can be distributed among several tables
Data Base View:
A database view is defined in the ABAP Dictionary and automatically created on the database during
activation. Accesses to a database view are passed directly to the database from the database interface.
The database software performs the data selection.
If the definition of a database view is changed in the ABAP Dictionary, the view created on the database
must be adjusted to this change. Since a view does not contain any data, this adjustment is made by
deleting the old view definition and creating the view again in the ABAP Dictionary with its new definition.
The maintenance status defines whether you can only read with the view or whether you can also write
with it. If a database view was defined with more than one table, this view must be read only.
The data read with a database view can be buffered. View data is buffered analogously to tables. The
technical settings of a database view control whether the view data may be buffered and how this should
be done. The same settings (buffering types) can be used here as for table buffering. The buffered view
data is invalidated when the data in one of the base tables of the view changes.
Maintainance View:
Data that is distributed on more than one table often forms a logical unit, called an application object.
You should be able to display, change and create the data of such an application object together. Users
usually are not interested in the technical implementation of the application object, such as the distribution of the data on several tables.
You can maintain complex application objects in a simple way using a maintenance view. The data is
automatically distributed on the underlying database tables.
All the tables used in a maintenance view must be linked with a foreign key. This means that the join
conditions are always derived from the foreign key in the maintenance view. You cannot enter the join
conditions directly as in a database view.
A maintenance interface with which the data of the view can be displayed, changed and created must be
generated from the definition of a maintenance view in the ABAP Dictionary.
When the maintenance interface is created, function modules that distribute the data maintained with the
view on the underlying tables are automatically generated.
The maintenance interface is generated with the Transaction Generate Table View (Transaction SE54)
or from the view maintenance screen with Environment -> Tab.maint.generator.
Database views implement an inner join. You only get those records which have an entry in all the tables
included in the view.
Maintenance views implement an outer join.
Help View:
A help view is defined analogously to a maintenance view. Help views can only be used as selection
methods in search helps. Since the R/3 System cannot pass the selection directly to the database using
a help view, it must generate its own access routines. The database view should therefore be used as
selection method in preference to the help view.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Regards,
Ram.

Questions about split ..trying to extract 2 levels of OUs from distinguishedname

Hallo .. I'm still on a voyage of self-discovery to teach myself Powershell. Be kind.
I'd like to extract two levels of OU names from a computer object's distinguished name in AD for a report. I'm getting .distinguishedname from get-adcomputer.
I have this:
CN=COMPUTERNAME,OU=OU2,OU=OU1,OU=NOTWANTED,OU=NOTTHISEITHER,DC=FOO,DC=BAR,DC=COM
...and I'd like to pull out:
OU1
OU2
I'd like each assigned to its own variable. Through messing around I've been able to get a little of what I want using split:
$OU = ($blah.DistinguishedName -split ",*..=")[2,3]
This gives me both OU1 and OU2, but I can't figure out how to separate *that* into two separate values which I can assign to $OU1 & $OU2.
Is split even the right choice, or would a regular expression be the way to go? I confess I don't really understand those yet.
Examples would be welcome.
Thanks much.
LW
Lanwench ** Do not fold, spindle or mutilate. Fill in the box completely and erase any stray marks. Use only a #2 pencil.

Nyuk. That's what you get when the liberal-arts majors go into tech!
Following your logic I figured out how to add $OU3 also. Goody.
Is it permissible to ask one more followup question in here or will I be beaten soundly? I'll risk it...
So, I can now see that although *most* of our servers have a consistent number of 'parent' OUs, some don't. Meaning, it could be one of the following...
CN=COMPUTERNAME,OU=OU3,OU=OU2,OU=OU1,OU=NOTWANTED,OU=NOTTHISEITHER,DC=FOO,DC=BAR,DC=COM
CN=COMPUTERNAME,OU=OU2,OU=OU1,OU=NOTWANTED,OU=NOTTHISEITHER,DC=FOO,DC=BAR,DC=COM
CN=COMPUTERNAME,OU=OU1,OU=NOTWANTED,OU=NOTTHISEITHER,DC=FOO,DC=BAR,DC=COM
...and I want to see *only* the OUs that are under OU=NOTWANTED. Children, I guess.
I tried filtering -
$container3=[adsi]$container2.Parent | | where-object {$_ -notlike "OU=NOTWANTED" }
and that didn't work at all. No error, but I'm seeing NOTWANTED as part of my output.
What is one of the many things I am probably doing wrong?
Lanwench ** Do not fold, spindle or mutilate. Use only a #2 pencil. Fill in the box completely and erase any stray marks.

A question about users assigned roles extraction

Dear all,
I have a question about users assigned roles list extraction. I need the list of the users who have already been created along with their assigned roles. According to what I found on Google, there is a table named AGR_USERS which provides the roles assigned to each user. Yet, this table provides only the SAP ID of each user along with the assigned roles. What I need more is to have also the first name and second name of each user.
So, do you know any table providing at least the following information:
1) First name of each user
2) Second name of each user
3) SAP ID of each user
4) All assigned roles to each user.
NOTE: I really need to have first name and second name in separate columns
Thanks in advance,
Dariyoosh

>
Shekar.J wrote:
> Agr_users for the user ID and role assignments
> USR02 to check the validity of the User ID
> and USER_ADDR for the first name and last name
>
> You can create a Table join of the above 3 tables to retrieve the data you require
Thanks to you and others for your attention to my problem
I don't know anything about ABAP programming, is there any transaction allowing to create this join? As it seems to me the column "UNAME" in the table "AGR_USERS" and the column "BNAME" in the table "USER_ADDR", both refer to the SAP ID of the user. As a result the condition of the join would be "WHERE (UNAME = BNAME)", is there any transaction/programme allowing to create this join?
Thanks in advance,
Dariyoosh

Pdf text extract problem with CID font and Identity-H

Hi all,
Iam facing some big problem with text extraction from pdf file.
Currently iam using congviews pdf2xl text extraction tool.
About 95% of the text extract correcly but few charaters showing box some ? and some dotted circle mark.
Font Used:
ArialUnicodeMS(Embedded Subset)
Type:(True Type (CID)
Encoding:Identity-H
TimesNewRomanPSMT
Type:True Type
Encoding:ANSI
ActualFont:TimesNewRomanPSMT
ActualFontType:TrueType
Anyone please help me to overcome this.
Regards
Gilbert.X

I tried with acrobat pro9 export option it retrieved only alphabets and numbers all of the hindi charcaters showing just ........
By the way how can i upload the my pdf file within this forum please guide me.
Regards
Gilbert.X

How to extract all keys (PK, FK) and constraints from the schema?

hi,
How to extract all keys (PK, FK) and constraints from the schema?Thanks!

I have no idea about any tool which only extract the DDL of constraints.
In oracle 9i or above you can use DBMS_METADATA to extract DDL of a table which also shows contraints defination.
You can take the tables export without data and use databee tool to extract the DDL.
www.databee.com

FI Extraction

Hi All,
I need some insight into FI extraction and how it differs from other modules data extraction(SD,MM..). I could not find any detailed documentation in service market place also. I appreciate some one can provide or guide on documentation on this topic.
Thanks,
Siva

There're 3 docs in Http://service.sap.com/bw under SAP BW InfoIndex / Extraction (SAP Systems) / ... one about FI/CO line Item extraction, one about CO-PA and one concerning LO Cockpit ... quite good.
Consider the option of a BW standard Course (should be 350)
Hope it helps
GFV

Data loading for Logistics Data Extraction 2LIS_06_INV through setup tables

Hi Guyz,
I have LO Datasource 2LIS_06_INV which I am using for extracting Invoice Verification Data.
I had intialized and loaded invoice data in BI system and was using chais to load daily.
Now I want to load data again from scratch from source system.
As of now I know we need to delete and fill up setup tables in source system keeping the users locked so that no new records are created that particular moment.
But what about the delta queue and extraction queues.
Do I need to do something over there because as I understand there will be records in both of them so before filling the setup tables I need to delete both the queues and then fill the setup tables so that duplicate records should be avoided.
Please let me know what exactly should I do in detail.
Appreciated in advance.
Regards,
raps.

hi,
this entirely depends upon the DS, if the DS delta type supports overwrite mode then you need not lock the users, you can start the setup job without deleting the delta queues as well coz even if the record is extracted twice the values won't mess up as the flow will be in overwrite mode. If delta type of DS is Additive in table ROOSOURCE then you need to lock down the users or run the job over a weekend when no users are logged in.
regard,
Arvind,

Meata data extract Utilities very urgent

Hi all my peers,
What are Metadata extract Utilities?
Will these utilities use in real time or just on option for Metadata can be extract through Utilities
Please explain me about this process Clearly

Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards

Generic Extraction & delta

Hi Experts,
Can anyone tell me regarding the generic extraction and how delta happens in this case.
regards,
MGR

MGR,
Please find the below links for more better understanding about the generic delta and extraction:
Business Content and Extractors
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
****Assign Points*********
Gattu

What is logic of LO extraction?

Hi,
Can anyone explain about the logic of LO Extraction? I searched for it couldn't get the answer.
thanks,
Nithi

delta mode :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03da665-bb6f-2c10-7da7-9e8a6684f2f9?quicklink=index&overridelayout=true
full mode :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50326ace-bac2-2b10-76bb-bd1a20ed2b57?quicklink=index&overridelayout=true
a quick search on LO extraction/set up table gave over 10.000 hits (articles, discussions, notes,...) i'm sure you can find the information you're looking for
M.

STEP BY STEP EXTRACTION OF DATA FROM R3 TO BI 7.O

Hi,
I am new to BI 7.0.
Can anybody explain me about the steps involved in extracting data from R3 to BI 7.0?
I know the steps in R3 side.I want to know how to replicate the datasource in BI 7.0 and assigning the Infosource.
Regards,
Sudheer.

Hi,
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Pls chk this cookbook for step by step;
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
Step by step Generic extraction:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
How To doc link
https://www.sdn.sap.com/irj/sdn/howtoguides
Hope this helps
Regards
CSM Reddy

FIAP extraction and partial payment

Hi experts, i having a problem about partial payment on FIAR extraction process.
My problem is that the last partial payment hasn't the reference invoice.
Could you help me.
Thanks a lot.
Regards.
Andrea

Hi,
please find below mentioed start routine code.Let me know if any issues on this
Regd
sivaraju
data : i_tab like DATA_PACKAGE,
           it_tab like TABLE OF i_tab,
           it_tab1 like TABLE OF i_tab.
data : i_fiap like /BIc/AzFIAp_O300,
         it_fiap LIKE TABLE OF i_fiap.
data : loopx LIKE sy-tabix.
refresh : it_tab, it_fiap, it_tab1.
* BREAK-POINT.
it_tab[] = DATA_PACKAGE[].
it_tab1[] = it_tab[].
DELETE it_tab1 where INV_DOC_NO is INITIAL.
sort it_tab1 by INV_DOC_NO inv_item comp_code inv_year.
delete ADJACENT DUPLICATES FROM it_tab1
      COMPARING INV_DOC_NO inv_item comp_code inv_year.
if not it_tab1[] is INITIAL.
    SELECT *
      from /BIc/AzFIAp_O300
      into TABLE it_fiap
      FOR ALL ENTRIES IN it_tab1
      where AC_DOC_NO = it_tab1-inv_doc_no
      and   item_num = it_tab1-inv_item
      and   comp_code = it_tab1-comp_code
      and   fiscyear = it_tab1-inv_year.
    sort it_fiap by AC_DOC_NO item_num comp_code fiscyear.
endif.
loop at it_tab into i_tab where INV_DOC_NO is not INITIAL.
    loopx = sy-tabix.
    clear : i_fiap.
    READ TABLE it_fiap into i_fiap with key ac_doc_no = i_tab-inv_doc_no
               item_num = i_tab-inv_item comp_code = i_tab-comp_code
               fiscyear = i_tab-inv_year BINARY SEARCH.
    if sy-subrc eq 0.
      i_tab-DOC_DATE = i_fiap-DOC_DATE.
      i_tab-netdueDATE = i_fiap-netdueDATE.
      modify it_tab FROM i_tab INDEX loopx TRANSPORTING doc_date
      netduedate.
    endif.
endloop.
refresh : DATA_PACKAGE.
DATA_PACKAGE[] = it_tab[].
* if abort is not equal zero, the update process will be canceled
ABORT = 0.

2 extract for 1 replicat

Hi all
i have one problem, i will create 2 database instance then configure goldengate each database instance.
sourceschema t1.rep_table01 DB1 (extract process) --|
|----> destination schema dest.rep_table01 DB03 (replicat process)
sourceschema t1.rep_table01 DB2 (extract process) --|
this topology possible on Oracle GoldenGate 11

I'm guessing your question is not really 2 Extracts for 1 Replicat, it's that you have two source tables feeding 1 target table, which is totally possible with GoldenGate as long as the table on DB1 is segmenting the key values from DB2's key values, so that you don't have conflicts on DB3.
And as Antony points out, you would use 1 Replicat for each Extract, and those two Replicats would be applying data to the 1 DB3 table, asynchronously. So again you'd have to ensure uniqueness between DB1 and DB2 data.
And if you are asking about 1 Replicat for 2 Extracts, you can't do that, nor can 2 Extracts write to the same trail, so you'll have to do 1 Extract and 1 Replicat per DB.

About fi-sl,co-pa extractions

Similar Messages

Maybe you are looking for