About field in alv
hello experts:
how to make a field mandatory in alv.
best regards,
Kevin
Hi kevin,
please visit the thread where the same doubt is being discussed.see this link:
Re: Making a column Mandatory / Required in an Editable ALV Grid.
you can try this also:
FORM DATA_CHANGED USING P_ER_DATA_CHANGED TYPE REF TO
CL_ALV_CHANGED_DATA_PROTOCOL .
DATA: L_VALUE TYPE LVC_VALUE,
ls_mod_cell type lvc_s_modi.
READ TABLE P_ER_DATA_CHANGED->MT_MOD_CELLS INTO LS_MOD_CELL.
if sy-subrc = 0.
CALL METHOD P_ER_DATA_CHANGED->GET_CELL_VALUE
EXPORTING
I_ROW_ID = LS_MOD_CELL-row_id
I_FIELDNAME = LS_MOD_CELL-fieldname
IMPORTING
E_VALUE = L_VALUE.
IF LS_MOD_CELL-FIELDNAME 'fieldname what u want'
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF.
ELSE.
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF.
hope this helps.
Thanks,
Rahul
Edited by: Rahul Kumar Sinha on Oct 14, 2008 12:48 PM
Similar Messages
-
How to assign a tooltip for a field in ALV editable grid?
I have to display some instructions ( 50 chars long) for an editable field in alv.
How to do this?
BCALV_DEMO_TOOLTIP tells about assiging tooltip to an icon or symbol.
Thanks,
Ven..Neither of these two example programs help much in regards to tooltips against any field of any row. Both of these examples use tooltips for Icons. I have also been looking for a single example of tooltips usage outside of these two programs, and have found nothing in SAP, or on the internet, so far.
Having said that, I have tried to implement the same method used by the later example, but have not got this to work. What I think we need is an example of this functionality where these Icons are not used!. I believe.
Gary King -
About filter in alv grid display
Hi,
I am practicing on REUSE_ALV_GRID_DISPLAY in that i want to know about how to use some fields like
*ITFILTER*_
IT_ALV_GRAPHICS
IT_HYPERLINK
IT_ADD_FIELDCAT
IT_EXCEPT_QINFOHi Rock.
I would like to suggest you a couple of references which quite relate to your case,
REUSE_ALV_GRID_DISPLAY - Output of a simple list (single-line)
[SDN - Reference for Using REUSE_ALV_GRID_DISPLAY - Basic Program|alv prog;
[SDN - Reference for Use of IT_FILTER in REUSE_ALV_GRID_DISPLAY |Doubts in ALV?;
[SDN - Reference for use of IT_FILTER with CODE in REUSE_ALV_GRID_DISPLAY|ALV Report;
[SDN - Refernce for Using IT_ALV_GRAPHICS in REUSE_ALV_GRID_DISPLAY|OOPs : SAVE and ALV Display Variant;
[SDN - Reference for Editing a graph in ALV (IT_ALV_GRAPHICS) using REUSE_ALV_GRID_DISPLAY|Edit Graph display ALV list display;
[SDN - Reference for use of IT_HYPERLINK in REUSE_ALV_GRID_DISPLAY|editable fields on ALV grid;
[SDN - Reference including example of IT_ADD_FIELDCAT in REUSE_ALV_GRID_DISPLAY|building top of page in ALV list;
[SDN - Reference for scenario for use of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|Background ID in ALV Grid;
[SDN - Reference for application example of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|PF Status in ALV list.;
Hope That's Usefull.
Good Luck & Regards.
Harsh Dave -
Action (navigation) when click on Hyperlink field in ALV web dynpro
Hi - I had a question about Hyperlink in ALV web dynpro and it was answered in Link: [web dynpro abap ALV link to (hyperlink);
Now I need to click the Hyperlink field and navigate to another screen.
i.e. I have a Object ID (PR Number) when I click the PR number I need to open the PR Document also another case is at the item level if the PR has more than one item I'm showing the word "MULTIPLE" so if the user click on Multiple I need to show all the items (material) in another ALV table that I already create.
Thanks for your help!
Jason P-VHi,
As per my understanding, there are PR number and Material and other columns in the SAME ALV table right.
There is a ONCLICK event for ALV not for the VIEWCONTAINTERELEMENT.
In the View where you have the ALV as component usage under view's properties, you have ALV usage right.
Now, under the METHODS tab of the ALV, implement an event
Onclick EventHandler ONCLICK(press F4) of that ALV.
Now the Click event is implemented for that ALV. When ever you click on any column(Hyperlink) this gets called.
Here there are parameters that you need to use it. R_PARAM has both the index and the element.
Based on the COLUMN you can call the respective event.
The index that you have clicked i shown from r_param->index and you can also know ATTRIBUTE name(column name).
If attribute eq 'PRNUMBER'
*call the Purchase requistion transaction
elseif attribute eq 'MATNR'.
*call the popup for other ALV as component usage to display item details.
endif.
Refer this Article -
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/bd28494a-0801-0010-45a3-fc359d82d3e8&overridelayout=true
Hope this is clear.
Regards,
Lekha.
Edited by: Lekha on Sep 26, 2009 12:57 PM -
How to pass field in Alv Top-of-page
Edited by: Deepak Mathrani on Aug 12, 2008 12:40 PM
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Aug 12, 2008 2:58 PMHi
sample program
*& Report ZNNR_ALVSAMPLE
REPORT znnr_alvsample NO STANDARD PAGE HEADING.
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
fieldcatalog-EDIT = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'(001) "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform. -
Regd: Calculation of TOTAL field in ALV report
Hi All,
We have a scenario that we are not getting the total value for numeric fields in ALV report.
Below i have given the code used for it.
G_KEY = 'X'.
G_NOKEY = SPACE.
G_SUM = 'X'.
G_NOSUM = SPACE.
PERFORM BUILD_FIELDCAT USING 'VBELN' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'BLDAT' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VGBEL' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'POSNR' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'MATNR' G_KEY G_NOSUM..
PERFORM BUILD_FIELDCAT USING 'LFIMG' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VRKME' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'NETPR' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'BRTWR' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VALUE_INR' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'B_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL1' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'CV_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'C_CVD' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL2' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'C_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL3' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'A_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'T_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_DISPLAY.
*& Form DISPLAY
text
FORM BUILD_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = TEXT-000
I_GRID_SETTINGS =
IS_LAYOUT = IG_LAYOUT
IT_FIELDCAT = IG_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IG_INBOUND
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form BUILD_FIELDCAT
text
-->G_FIELDNAME text
-->L_KEY text
-->L_SUM text
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME L_KEY TYPE C L_SUM TYPE C.
CLEAR WG_FIELDCAT_LN.
ADD 1 TO G_COL_POS.
WG_FIELDCAT_LN-REF_TABNAME = 'IG_INBOUND'.
WG_FIELDCAT_LN-FIELDNAME = L_FIELDNAME.
WG_FIELDCAT_LN-KEY = L_KEY.
WG_FIELDCAT_LN-DO_SUM = L_SUM.
WG_FIELDCAT_LN-COL_POS = G_COL_POS.
WG_FIELDCAT_LN-NO_OUT = SPACE.
WG_FIELDCAT_LN-QFIELDNAME = SPACE.
WG_FIELDCAT_LN-HOTSPOT = SPACE.
APPEND WG_FIELDCAT_LN TO IG_FIELDCAT.
ENDFORM. "BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
FORM BUILD_LAYOUT.
IG_LAYOUT-TOTALS_TEXT = 'Total Amount'.
*IG_LAYOUT-SUBTOTALS_TEXT = 'A'.
IG_LAYOUT-ZEBRA = 'X'.
ENDFORM.
Help and Sugesstions will be much appreciated.
Thanks & Regds.
Ramesh.This is sample program for the same
REPORT Z_50657_ALV_EX2
NO STANDARD PAGE HEADING
LINE-COUNT 65(3)
LINE-SIZE 220
MESSAGE-ID ZZ.
* Type Pools *
TYPE-POOLS: SLIS, ICON.
* Tables *
TABLES: VBAK. "Sales Document Data
* Internal Tables *
* TABLE TO HOLD DATA OF SALES DOCUMENT
DATA: BEGIN OF IT_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN, "Sales Document
VBTYP LIKE VBAK-VBTYP, "SD document category
AUDAT LIKE VBAK-AUDAT, "Document date (date received/sent)
AUGRU LIKE VBAK-AUGRU, "Order reason (reason for the business)
AUART LIKE VBAK-AUART, "Sales Document Type
NETWR LIKE VBAK-NETWR, "Net Sales Order in Doc. Currency
WAERK LIKE VBAK-WAERK, "SD document currency
ICON TYPE ICON-ID, "traffic lights
END OF IT_VBAK.
* Work Areas *
*WORK AREAS DEFINED FOR ALV'S
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV, "field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, "field catalog ITAB
WA_SORT TYPE SLIS_SORTINFO_ALV, "SORT work area
IT_SORT TYPE SLIS_T_SORTINFO_ALV, "SORT ITAB
LAYOUT TYPE SLIS_LAYOUT_ALV, "LAYOUT
WA_FCODE TYPE SLIS_EXTAB, "FUN CODE
I_FCODE_EXTAB TYPE SLIS_T_EXTAB,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
* Selection-Screen *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
PARAMETERS: P_VBTYP LIKE VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: LIST RADIOBUTTON GROUP G1,
GRID RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
* At Selection-Screen *
*VALIDATION
* Start of Selection *
START-OF-SELECTION.
*POPULATION OF DATA INTO INTERNAL TABLE ITAB
PERFORM GET_DATA.
*DEFINE USER DEFINED FIELDCATALOG
PERFORM DEFINE_FIELDCATALOG.
*SUBTOTALS AND TOTALS DISPLAY USING SORT
PERFORM SORT_LIST.
*CHANGE FCODE OF STATUS
PERFORM CHANGE_FCODE.
*CHECK RADIOBUTTON OPTION AND ACCORDINGLY FINAL DISPLAY
PERFORM CHECK_OPTION.
*& Form GET_DATA
* text
FORM GET_DATA.
SELECT VBELN
VBTYP
AUDAT
AUGRU
AUART
NETWR
WAERK FROM VBAK INTO TABLE IT_VBAK
WHERE VBELN IN S_VBELN AND VBTYP = P_VBTYP
AND ERDAT > '01.01.2004' AND NETWR > 0.
LOOP AT IT_VBAK.
IF IT_VBAK-NETWR < 10000.
IT_VBAK-ICON = '@08@'.
ELSEIF IT_VBAK-NETWR > 100000.
IT_VBAK-ICON = '@0A@'.
ELSE.
IT_VBAK-ICON = '@09@'.
ENDIF.
MODIFY IT_VBAK INDEX SY-TABIX.
ENDLOOP.
ENDFORM. "GET_DATA
*& Form CHECK_OPTION
* text
FORM CHECK_OPTION.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'TOP'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
WA_EVENTS-NAME = 'END_OF_LIST'.
WA_EVENTS-FORM = 'END_LIST'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
IF LIST = 'X'.
PERFORM LIST_DISP.
ENDIF.
IF GRID = 'X'.
PERFORM GRID_DISP.
ENDIF.
ENDFORM. "CHECK_OPTION
*& Form DEFINE_FIELDCATALOG
* text
FORM DEFINE_FIELDCATALOG.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'ICON'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-OUTPUTLEN = 8.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC NO.'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-FIELDNAME = 'AUDAT'.
WA_FIELDCAT-SELTEXT_L = 'CREATED ON'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-FIELDNAME = 'VBTYP'.
WA_FIELDCAT-SELTEXT_L = 'CATEGORY'.
WA_FIELDCAT-OUTPUTLEN = 1.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-FIELDNAME = 'AUGRU'.
WA_FIELDCAT-SELTEXT_L = 'REASON'.
WA_FIELDCAT-OUTPUTLEN = 3.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-FIELDNAME = 'AUART'.
WA_FIELDCAT-SELTEXT_L = 'DOC TYPE'.
WA_FIELDCAT-OUTPUTLEN = 4.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET VALUE'.
WA_FIELDCAT-OUTPUTLEN = 17.
WA_FIELDCAT-DECIMALS_OUT = 2.
* WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 8.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'UNIT'.
WA_FIELDCAT-OUTPUTLEN = 50.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "DEFINE_FIELDCATALOG
*& Form DEFINE_LAYOUT
* text
FORM DEFINE_LAYOUT.
LAYOUT-ZEBRA = 'X'.
LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL SUM'.
LAYOUT-WINDOW_TITLEBAR = 'EXERCISE 2'.
LAYOUT-TOTALS_TEXT = 'TOTAL'.
ENDFORM. "DEFINE_LAYOUT
*& Form SORT_LIST
* text
FORM SORT_LIST.
WA_SORT-FIELDNAME = 'VBELN'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-SPOS = 1.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-UP = 'X'.
WA_SORT-SPOS = 2.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
ENDFORM. "SORT_LIST
*& Form LIST_DISP
* text
FORM LIST_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT
IS_LAYOUT = LAYOUT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAK
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "LIST_DISP
*& Form GRID_DISP
* text
FORM GRID_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = IT_VBAK.
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "GRID_DISP
*& Form STATUS
* text
* -->P_EXTAB text
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING P_EXTAB.
ENDFORM. "STATUS
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'BACK' OR 'CANC' OR 'EXIT'.
LEAVE TO SCREEN 0.
WHEN '&IC1'.
SET PARAMETER ID 'AUN' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form CHANGE_FCODE
* text
FORM CHANGE_FCODE.
WA_FCODE = 'PRNT'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OAD'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&AVE'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&EB9'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&SUM'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&UMC'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&XPA'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OMP'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
ENDFORM. "CHANGE_FCODE
*& Form TOP
* text
FORM TOP.
IF LIST = 'X'.
WRITE:/ SY-ULINE.
WRITE:/ 'DATE:', SY-DATUM,55 'INTELLIGROUP ASIA PVT LTD'.
WRITE:/ 'TIME:', SY-UZEIT.
WRITE:/ 'USER NAME:', SY-UNAME,60 SY-TITLE.
WRITE:/ 'PAGE', SY-PAGNO.
WRITE:/ SY-ULINE.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'truman'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_TOP_OF_PAGE
I_LOGO = 'ENJOY_SAP_LOGO'.
ENDIF.
ENDFORM. "TOP
*& Form END_LIST
* text
FORM END_LIST.
IF LIST = 'X'.
SKIP 2.
WRITE:/60 'END OF PAGE'.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_END_OF_LIST TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = TEXT-105.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_END_OF_LIST.
ENDIF.
ENDFORM. "END_LIST -
Hi Expert,
IN ALV report using RESUE_ALV_GRID_DISPLAY . I want to sort the second field of ALV output . In this function module RESUE_ALV_GRID_DISPLAY using event PF_STATUS . so can u tell me how sort the second field .
Regards
BhabaniHi,
check the fallowing code
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE slis_sortinfo_alv,
****SORT LABELS AT RUN TIME
WA_SORT-TABNAME = 'IT_FINAL1'.
WA_SORT-FIELDNAME = 'BUDAT'.
WA_SORT-UP = 'X'.
WA_SORT-GROUP = 'X'.
WA_SORT-subtot = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-TABNAME = 'IT_FINAL1'.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-UP = 'X'.
WA_SORT-GROUP = 'X'.
WA_SORT-subtot = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_SORT = IT_SORT
I_DEFAULT = 'X'
I_SAVE = 'U'
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Nandan.N -
I am not getting the headings of the fields in ALV output.
I am not getting ALV out put but the headings of the fields in ALV output.
Please see my below code .
TYPES : BEGIN OF ty_zgxmit.
INCLUDE STRUCTURE zgxmit.
TYPES : END OF ty_zgxmit.
DATA : gt_zgxmit TYPE TABLE OF ty_zgxmit.
*& Form alv_display *
This subroutine is to display the out put in ALV. *
FORM alv_display .
Local data
DATA: y_x LIKE boole VALUE 'X'.
DATA: lt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: lf_fieldcat TYPE slis_fieldcat_alv.
DATA: lh_index LIKE lf_fieldcat-col_pos.
For variant
DATA: ws_repid LIKE sy-repid,
g_save TYPE c VALUE 'A',
g_exit TYPE c,
g_variant LIKE disvariant,
gx_variant LIKE disvariant.
For 1st field.( RPT_LOC )
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'RPT_LOC'.
lf_fieldcat-tabname = 'GT_ZGXMIT'.
lf_fieldcat-ref_tabname = 'RPT_LOC'.
lf_fieldcat-ref_fieldname = 'ZGXMIT'.
lh_index = lh_index + 1.
lf_fieldcat-col_pos = lh_index.
lf_fieldcat-key = y_x.
lf_fieldcat-no_sum = y_x.
APPEND lf_fieldcat TO lt_fieldcat.
For 2nd field.( BAL_XMIT )
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'BAL_XMIT'.
lf_fieldcat-tabname = 'GT_ZGXMIT'.
lf_fieldcat-ref_tabname = 'BAL_XMIT'.
lf_fieldcat-ref_fieldname = 'ZGXMIT'.
lh_index = lh_index + 1.
lf_fieldcat-col_pos = lh_index.
lf_fieldcat-key = y_x.
lf_fieldcat-no_sum = y_x.
APPEND lf_fieldcat TO lt_fieldcat.
For 3rd field.( INC_XMIT )
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'INC_XMIT'.
lf_fieldcat-tabname = 'GT_ZGXMIT'.
lf_fieldcat-ref_tabname = 'INC_XMIT'.
lf_fieldcat-ref_fieldname = 'ZGXMIT'.
lh_index = lh_index + 1.
lf_fieldcat-col_pos = lh_index.
lf_fieldcat-key = y_x.
lf_fieldcat-no_sum = y_x.
APPEND lf_fieldcat TO lt_fieldcat.
For 4th field.( Z500_XMIT )
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'Z500_XMIT'.
lf_fieldcat-tabname = 'GT_ZGXMIT'.
lf_fieldcat-ref_tabname = 'Z500_XMIT'.
lf_fieldcat-ref_fieldname = 'ZGXMIT'.
lh_index = lh_index + 1.
lf_fieldcat-col_pos = lh_index.
lf_fieldcat-key = y_x.
lf_fieldcat-no_sum = y_x.
APPEND lf_fieldcat TO lt_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZJV_2245'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = gt_zgxmit
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_displayYou can force the headings like so.
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'RPT_LOC'.
lf_fieldcat-tabname = 'GT_ZGXMIT'.
lf_fieldcat-ref_tabname = 'RPT_LOC'.
lf_fieldcat-ref_fieldname = 'ZGXMIT'.
lf_fieldcat-reptext_ddic = 'Whatever Heading'. "<- Right here
lh_index = lh_index + 1.
lf_fieldcat-col_pos = lh_index.
lf_fieldcat-key = y_x.
lf_fieldcat-no_sum = y_x.
APPEND lf_fieldcat TO lt_fieldcat.
Regards,
Rich Heilman -
How to find fields in ALV variant
Hi,
How do we find the fields in ALV layout? I have a layout name. I want to find what are all the fields that are available in the layoutlink:[http://wiki.sdn.sap.com/wiki/display/stage/ToGetFieldDetailsSavedinVariant+Layout]
-
Include A Field in ALV which is not in data dictonary.
Hi all,
Im doing ALV report.
in that i need to calculate the gross price.
so i've to take difference of two fields & store it in a variable.now i want to know how i should display this field in alv.
Example:
v_gprice = i_tab-netwr - i_tab-wavwr.
i want to display this field(v_gprice) in my output along with other fields.
i moved this field to that i_tab.but im not getting the result.it shows dump.hii
just include that field in your internal table , and while display give perticular column no. and filed value , if u r using it without merge.
chk the following code
OUT TYPE P DECIMALS 2,
OUTINR TYPE P DECIMALS 2,
END OF ITAB.
LS_FIELDCAT-TABNAME = 'ITAB'.
LS_FIELDCAT-FIELDNAME = 'OUT'.
FLDNAMES-FIELDNAME = 'OUT'.
LS_FIELDCAT-COL_POS = 22.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-KEY_SEL = 'X'.
LS_FIELDCAT-SELTEXT_L = 'OUTSTANDING AMOUNT'.
LS_FIELDCAT-datatype = 'CURR'.
LS_FIELDCAT-DO_SUM = 'X'.
LS_FIELDCAT-cfieldname = 'WAERK1'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT .
LS_FIELDCAT-TABNAME = 'ITAB_VBMTV'.
LS_FIELDCAT-FIELDNAME = 'OUTINR'.
LS_FIELDCAT-COL_POS = 24.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-KEY_SEL = 'X'.
LS_FIELDCAT-SELTEXT_L = 'OUT IN INR'.
LS_FIELDCAT-DO_SUM = 'X'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT . -
Hide a field in ALV "Display Details" list
Hi Experts,
I have a requirment where I have to hide a field in ALV output, as well as in "Details display". I already put NO_OUT = 'X' for that field in fieldcatalog itself. It is hidden in the ALV output anyway, but the problem is when user selects a row and clicks on "Details" button in toolbar of ALV, it still displays the hidden fields of that ALV list with/out headings there.
Hope you understood my problem, pls respond soon if you hav any solution for this?
Thanks
SaravUse TECH = 'X' in field catalog.
Regards,
Raymond -
Can I make text orientation of a field in ALV 90 degree to horizontal
Hi
I have to make text orientation of a field in ALV 90 degree to horizontal, just like we can do in excel sheet. Is it possible to do so. If yes, then how can we do it? I can not attach the illustration but you can type in some text in excel field and then right click--> format--> on popup window make the orientation 90 degrees.No dude,
I dont think it is really possible.
Regards,
Ravi -
Hello Guys,
I'm using 'REUSE_ALV_GRID_DISPLAY' in my prog.
There is a field in output table which is of type P(8) Decimals 3.
When I'm trying to get the sum of this field in ALV Display it gives the message " Desired operation cannot be performed for column 'Converted Quantity' ".
I have also tried do_sum = 'X'.
But it is not working. Please help guys.
Regards,
AbhinavThanks a lot guys for your inputs.
The program is working now.
Now I'm using :
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QUAN'.
* wa_fieldcat-ref_tabname = 'I_OUT2'.
* wa_fieldcat-tabname = 'I_OUT2'.
wa_fieldcat-qfieldname = 'MEAS'.
wa_fieldcat-qtabname = 'I_OUT2'.
wa_fieldcat-outputlen = '15'.
wa_fieldcat-seltext_l = text-052.
APPEND wa_fieldcat TO i_fieldcat.
The program is working fine now.
I have commented tabname and -ref_tabname , and the program is working fine now.
Thanks a lot. -
Hi experts,
i want to add extra field in alv that is totalprice
the total price = qunatity * price
already quantity and price from data base tables
but the field total price is not from any table..
thanks advansHi,
Quantity and Price both are ddic fields.
Define the TOTAL PRICE of the type Price in the final internal table(table to b displayed).
before passing the data / in looping define the logic...
LOOP AT T_SOURCE.
T_FINAL-PRICE = T_SOURCE-PRICE.
T_FINAL-TOL_PRICE = T_FINAL-QTY x T_FINAL-PRICE
ENDLOOP.
Now all the required values are in the final table.
Reward if helpful.
Thanks. -
To calculate average for a currency field in alv
Hi,
I have a requirement in which i need to find the average of a currency field in alv. For the particular field, i'm passing the value of DO_SUM = 'C' in thr field catalog(as suggested in many threads); but I'm not able to calculate the average. it still shows me summation when i click on summation button.
What could be the possible error??? Is there any other method we can do the same??
Thanks in Advance.
JaspreetHi
U can try this way.
*& Report Z_DEMO_JG
*& Display average in ALV report
REPORT z_demo_jg LINE-SIZE 80 LINE-COUNT 50
NO STANDARD PAGE HEADING.
TABLES: sflight.
TYPE-POOLS: slis.
* Data declaration
DATA: i_flight TYPE STANDARD TABLE OF sflight,
i_catalog TYPE slis_t_fieldcat_alv,
w_flight TYPE sflight,
w_catalog TYPE slis_fieldcat_alv.
DATA: v_repid TYPE syrepid.
* Selection screen
SELECT-OPTIONS: s_carrid FOR sflight-carrid.
START-OF-SELECTION.
* Fetch data from sflight table
SELECT *
FROM sflight
INTO TABLE i_flight
WHERE carrid IN s_carrid.
CHECK sy-subrc = 0.
v_repid = sy-repid.
* Build field catalog for ALV report
PERFORM build_catalog.
* Display ALV report
PERFORM display_report.
*& Form build_catalog
* Build field catalog for ALV report
* None
FORM build_catalog .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = v_repid
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = i_catalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* For average populate 'C' as value in
* field DO_SUM
w_catalog-do_sum = 'C'. " C = Average
* Modify record with new value
MODIFY i_catalog FROM w_catalog TRANSPORTING
do_sum WHERE fieldname = 'PRICE'.
ENDIF.
ENDFORM. " build_catalog
*& Form display_report
* Display ALV report
* None
FORM display_report .
IF i_catalog[] IS NOT INITIAL.
* Call ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
it_fieldcat = i_catalog
TABLES
t_outtab = i_flight
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
ENDIF.
ENDIF.
ENDFORM. " display_report
Edited by: meetjoe on Sep 15, 2009 7:17 PM
Maybe you are looking for
-
My Photo Stream has suddenly stopped pushing photos from my iPhone 4s to my PC although they are appearing on my other iPhone. Any ideas why or how to fix the issue? I have not altered any settings.
-
Hello! I want to ask you how to add a new path in Solaris, because I wanna compile Ethereal source and it say that I don't have GLIB and GTK greater than 1.2.0... bulshit! I have version 1.2.10. Someone told me to add GLIB and GTK libraries path to o
-
Can I have two Iphones connected to one icloud account and if so, how do I change the icloud user name on the phone
-
Hi, I am beginner for XI. I am require to do a task for the FILE TO RFC between external system and sap r3 using XI. My question is lets said the file was converted to rfc and suddenly the connection between r3 to XI hit error when the rfc try to s
-
10.4.6 & Photoshop CS - crashes when saving .tiff file
Hello! my coworker is running a powerPC g4 1.25 running 10.4.6 w/ 2gb RAM. Since he has upgraded to 10.4.6, he has photoshop crash on him most everyday. after hearing him gripe about this, i decided to find a solution. we've tried deleting the prefer