About Flex Builder3 File Search.

1.In Flex Builder3 's menu -- Search , I only can see two
items: declarations and references.
But when I press Ctrl+Shift+F, then pop File Search window.
Forget menu ??
2.In File Search window, press Search button, then
perspective change to DataBase Development perspective.
Is this a bug?

Hi,
There is a menu entry for this dialog, under the Edit main
menu item. And it has the shortcut key combination that you
mentioned.
As for the second problem, my only guess is that you have
installed another plugin after Flex Builder and it associated the
search dialog with its own specific perspective. If you can provide
a list of installed plugins, and in which order they were installed
we will try and duplicate this issue. (tight now it doesn't happen
for me).
Thanks,
Cristian

Similar Messages

How to search in Flex SDK files in Flash Builder

Hi there
I want to search Flex sdk files out from flashbuilder - like I can do with the menu search->search dialog. Is there a way to do so? I am interested in it because sometimes I do not only want to hit F3 to go to a source file - I would like to serach the SDK.
Thanks,
Marc

Thanks Mich - very helpful. This is easier than searching the google trunk - here on my sytem it is CTRL+SHIFT+T.
Marc

Open PDF's in new window in document library when using "Find a file" search

I need to be able to open PDF's in a new window from a document library when using the "Find a file" search built into the document library "All documents" view. I currently have the following javascript on the page:
_spBodyOnLoadFunctionNames.push("setTargetBlank()");
function setTargetBlank()
{ $("a[href$='.pdf']").removeAttr('onclick').attr("target", "_blank");
This works great when going to the document library and navigating through the folders then clicking on a link.
The problem is when someone goes to the document library then uses the "Find a file" search and then they click on a link. The "Find a file" search does not do a postback (reload) of the page, therefore my javascript to find the PDF links
and make them open in a new window does not run for the links on the page.
I have read the following article but this does not seem to offer a solution that will work in this situation for SharePoint 2013 (Office 365): http://social.technet.microsoft.com/Forums/sharepoint/en-US/7ad3224c-3165-47ae-95bc-4f3928e2f9a8/opening-document-library-pdf-in-a-new-window-sharepoint-2013?forum=sharepointgeneral
I suppose the idea solution would be to somehow tap into the event that is fired when using "Find a file" search to run my javascript and update the links for the search results.
Can anyone offer any solutions to this issue?

Hi,
According to your description, my understanding is that you want to open PDF files in a new window from a document library when using the "Find a file" search.
As you said, the "Find a file" search does not do a postback (reload) of the page, therefore JavaScript to find the PDF links and make them open in a new window does not run for the links on the page.
I recommend to use JS link to achieve the goal. Create a JavaScript override file and upload the JavaScript file to the Master Page Gallery, and then set the JS Link property of the document library web part to point to the JavaScript file.
Here are some links about the JS link in SharePoint 2013 for you to take a look:
http://www.idubbs.com/blog/2012/js-link-for-sharepoint-2013-web-partsa-quick-functional-primer/
http://www.learningsharepoint.com/2013/04/13/sharepoint-2013-js-link-tutorial/
http://zimmergren.net/technical/sp-2013-using-the-spfield-jslink-property-to-change-the-way-your-field-is-rendered-in-sharepoint-2013
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Help required regarding AR module, XML and flex builder3

I need some help regarding flex project in flex builder3.
I am working on flash based augemented reality using flex builder3. I want to develop a module for a boutique using which user can try on different dresses. I want to build this module in such a way that camera gets loaded at one side(left) of the window with a TileList (displaying list of images with their prices) on the right side of the window.
In order to populate the TileList i'm using HTTPservice to dyanamically load xml (xml->containing dress images along with prices). This part is working fine i.e. when i run this project, xml content gets loaded in TileList.
My problem is when I copy the swf file of my project along with resource files somewhere else and then launch that swf file, it gives me an alert
that xml can't be loaded. Secondly augmented reality part(i.e. camera) doesn't load; left part of window remains blank).
I want someone to help me solve these issues.

Hi,
use this FM to update ur shipment
variables
DATA: lo_tp_g_tra       TYPE v56e_shipment_activities, "Data to modify
      lo_tp_g_shp       TYPE v56e_shipment,
      lo_tp_g_log       TYPE v56e_logfile, " Errors function
call the function to modify shipments
CALL FUNCTION 'SD_SHIPMENT_PROCESS'
IMPORTING
    e_logfile    = lo_tp_g_log
CHANGING
    c_activities = lo_tp_g_tra
    c_shipment   = lo_tp_g_shp
EXCEPTIONS
    error        = 1
    OTHERS       = 2.
Thanks,
Sendil.

File search problems in Leopard

I MUCH preferred the older (pre-leopard) finder file search application(NOT spotlight). I was able to type what I was looking for and manually select the drives and servers I wanted searched in the finder window. The results came in, broken down by kind (image, document, pdf, folder) in icon driven sub-categories. Spotlight and the clumsy new search application are a MAJOR setback for me. This is the first bad move I have had to call Apple on.

You can only select the whole computer, or ONE and only one specific location to search (this is a reduction in functionality from the implementation of Spotlight in Tiger). Thus if I wanted to search my Data drive only, not my startup or backup drive, I would navigate in the Finder to the Data drive, then hit Command-F, then click on "Data" rather than the default "This Mac" (which is always selected, which is ridiculous--when you bring up search with a Command-F you want to search in that place, if you wanted to search everywhere you would use the Spotlight menu bar function). The nearest you can come to grouping things is to put the results window into List view (Command-2 or select from List from the View option in the Finder window's toolbar), then click the Kind column. You might find my little essay on Leopard's Spotlight helpful:
http://www.pinkmutant.com/articles/Leopard/leospot.html
You might also wish to tell Apple about how you feel:
http://www.apple.com/feedback/macosx.html/
The more complaints they receive, the more likely things will improve.
Francine
Francine
Schwieder

Can I do complex file search?

Hello,
In Bridge (presently working with both CS3 and CS4), I nned to elaborate complex file search and create smart collections using complex search queries such as:
[file type is JPEG] AND ([a metadata contains "XXXXX"] OR [a metadata contains "YYYYY"])
or even more complex:
[file type is JPEG] AND ([a metadata contains "XXXXX"] OR [a metadata contains "YYYYY"]) AND ([width > nnnn] OR [height > pppp])
Is this possible? How?
Thanks in advance for any help or suggestion

Thank you.
Of course, I tried using the find command, adding lines and so on. But it was not enough for what I need to do.
But you wrote about scripts. Do you mean that complex searchs are possible through scripts, using the BridgeTalk API? I never tried scripting...
Could somebody provide a sample script, so that I can see how to program such a command? It would help me so much!

Where I can download the ebook about flex?

I'm new to flex,where I can download the ebook about
flex?Thank you.

I'm not sure what you mean by eBook, but the Flex usage
documentation is available from the Flex Help resource center:
http://www.adobe.com/support/documentation/en/flex/
They are available as PDFs and as part of a zip file that
contains the entire set of content.

File search - not authorized

I have system of computers... all with similar setups, about half I can control and observe, but not transfer files. The other half I can control, observe, and transfer file work fine.
I can not understand why some work and some do not.... same setup.
When I try to transfer a file, or search for a file the task files and the error it gives is not authorized, however I have ARD'd in with admin access.

I had a similar problem where I could perform a File Search, but it would fail on at least half of the machines and return a Not Authorized error. What seems to have fixed this problem is to click on the "Rebuild data for report" check box, and this cleared up the problems I was having with a trouble computer that would not return a File Search. I could connect to the computer and control it just fine, but could never get a report back from it.
Perhaps this might fix your problem?

Getting an error message about a missing file when I try to open Firefox

When I tried to open Firefox today I received a message about a missing file (Wrusr.ddl) and that Firefox was not able to open. I tried uninstalling and reinstalling but it did not work. I have no idea what that file is or where is went. I used Firefox 2 days ago and it was working fine. The only thing that changed between then and today was that I renewed my antivirus software but I definitely did not delete any files and I made sure that Firefox is allowed to access the internet. I've been using that same software (Webroot) with Firefox for years and never had any issues before today. Any help would be greatly appreciated! I have included a screenshot of the error message below.

hello angelag.132, the WRusr.dll file is part of Webroot SecureAnywhere - try to reinstall or uninstall that software.

Bug in Multi-File Search and Replace in RH6?

I'm using the 6.0 trial, and one thing I want to be able to
do is to replace the variables I put in using JavaScript with the
new feature variables in 6.0. So, I went in to multi-file search
and replace, and searched for:
<script
language=JavaScript>document.write(varProduct)</script>
I copied this code directly from a topic, and pasted it into
the Search tool.
I don't even care whether I can successfully copy the code
from my new variable for use as the replacement text; I'd be happy
if the multi-file search would simply find all occurrences of my
original code so I don't miss any during conversion to 6.0.
It keeps coming up as not found, and this concerns me
greatly. Has anyone else experienced this? Is it a known bug? Does
anyone have a workaround?
Thanks!

Hi robowriter
I'm assuming you are using the wondrous little applet known
as Multi-File Find and Replace.
Unfortunately, this little beastie is like a cat. It
frequently has a fussy tummy and loves to hork up furballs. Well,
not exactly. Really what it does is fail to properly handle
anything with a line break. So you need a tool that does do this.
Fortunately, one exists! It is called FAR (Find And Replace). Oddly
enough, it was also written by a fellow Microsoft Help MVP named
Rob Chandler. (Rob lives in Australia)
You can download a trial version of FAR from the FAR page.
Click here to visit
the FAR page
Cheers... Rick

Server 2008r2 and windows 7 pro slow to no networkshare file searching and file access (green progress bar)

we are running a windows server 2008r2 sp1 domain controller and a 3com gigabit switch to which 7 windows 7 pro computers are connected. We are only using the windows server to distribute a few printers and as a network share (z drive).
we are storing all files (word documents only) centrally on the server (z share), and files are accessed and written to the z share.
Problem is that file access from the z share on the windows 7 client computers is at best buggy. we are able to browse the z-share, but as soon as we want to search the z-share for files (f.i. use file explorer with "content: memorandum") the green
progress bar shows and no search is performed. something like alphabetically sorting a directory on map/file name on the z-share also shows a green bar with no sorting. manually going to the files works.
One thing i noticed, sometimes not all files that one user created and stored on the server is visible and can be found by another user. I prefer to disable all offline file caching setting, because that feature is not used. no files should be made accessible
offline. i don't know where to change that on the server side.
I am reluctant to experiment on the server end (2008r2 sp1), so i tried a few suggested solutions on the client end (windows 7 client)
I tried disabling offline file caching
i tried properties (z share) ==> advanced and map optimizing and several options there
i tried disabling the smbv2 protocol and disabling the smbv1 protocol (using
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi command etc. posted by microsoft)
i tried disabling windows defender
i tried accessing the z share via ip and server name (the share is mapped via its servername, e.g. dennis-dc1\share). still the same
file searching on the clients c drive ('own harddrive') works much better, file searching on the server also works.
any suggestions or solutions that i can test on the client side, as mentioned i am reluctant to change something on the server side. if a solutions works, i prefer to change it on the server side.

Hi,
The issue could be due to windows indexing service taking long time in sorting and searching in mapped drives. Please try the steps belwo to disable windows indexing service or search service on the windows 7 client to resolve the issue.
You can click on Start and select Control Panel, click on
Programs and Features, go into the Turn Windows Features on or off section Scroll down the list and uncheck the box next to Indexing Service or Windows Search.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

Iso 5 the app store is working very slow, takes about 2 min to search....

iso 5 the app store is working very slow, takes about 2 min to search....

iso 5 the app store is working very slow, takes about 2 min to search....

A how-To guide about splitting import files exists?

Hi All,
in his Webinar https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409e4529-adbc-2a10-4d9b-e8fade570414
Klaus David said a "A how-To guide about splitting import files exists" (Page 20).
Can anybody tell me where to find this guide?
Please mail to becker.roman ( at ) web . de
Best regards
Roman

I found the link here, if you are still looking.
I didnot check the contents yet but the title says
MDM 5.5 SP06 - IT Scenario Configuration Guide -
https://websmp202.sap-ag.de/~sapidb/011000358700001119482007E
Thanks
Satya

How to do complex file search for "word" unknown characters "word" .file extension?

How to do complex file search for "word" unknown characters "word" .file extension?

Using spotlight in Finder helps. Do you know how to search for files in Finder?

About Flex Builder3 File Search.

Similar Messages

Maybe you are looking for