About FM BAPI_BUPA_CENTRAL_CHANGE update

Hi all,
I am entering an BP no in FM BAPI_BUPA_CENTRAL_CHANGE . The FM is Running but not showing any result in Return table and the data is not getting changed too.Why is it so? any ideas guys?.
Please reply soon.

Hi,
Please check you are possing correct value in table .....X (end with X)
e.g.
If you are changing TELEFONDATANONADDRESS remember you should have correct values set in TELEFONDATANONADDRESSX.
Also check field in UPDATEFLAG in table TELEFONDATANONADDRESSX.
'U' - Update
'D' - Delete
Where ever you make changes replace with 'X'
suppose u r changing TEL_NO then in TELEFONDATANONADDRESSX-TEL_NO set as 'X'
I hope it will work.
Regards,
Nilesh P.

Similar Messages

HT1386 When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software.

When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

Welcome to Apple Discussions!
You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
http://www.macmaps.com/browser.html
As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
http://www.macmaps.com/macosxnative.html
which should answer most of your other questions. If you have further questions, please feel free to ask me.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212

I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

You should never lose contacts under any circumstances.
Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select.

Doubt about Scan and Update Catalog Objects That Require Updates link

Hi,
I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
how can I know how many objects that required upgrading before I click this link???
in doc.
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
section 17.2.4 Updating Catalog Objects
It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
but I don't find it . my OBIEE version :11.1.1.6.2
conld you pleae help me ??
thank you in advance.

That link should be there in 6 version.
I've verified in 11g6 version doc the same is existing
ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
BTW:
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
Thanks,
http://cool-bi.com

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat

How to remove Help - About - "Check for updates"

I need to disable completelly all update possibilities from Firefox 4 installation and this is still something that I have not been able to remove.
inside omni.jar I have found similar configuration files that have been working also in prevoius FF versions and have been able to remove update tab completelly from Tools - Options -> Advanced but I have not been able to remove this update button from FF.
I thought that I found correct file to change:
"omni.jar\chrome\browser\content\browser -> aboutdialog.xul" but modifying that does not affect at all to this About - check for updates button.
Any ideas? I have tried to check other files also for this, but have not yet found anything, unfortunately...

A possibility is to use CSS code in userChrome.css or create an extension that adds this code.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#updateBox { display:none !important; }</nowiki></pre>
* http://kb.mozillazine.org/Editing_configuration

My xpreia not found in about phone software updates

After buying this phone and spending ages setting it all up, I find that I can not activate the my xperia feature. Sony website says go to settings/about phone/software updates to find options but nothing is there, just stating that phone is up to date !
How do I activate my xperia on the E1 ? I am wanting to setup the lost phone feature.
Thank you.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
The My Xperia update rolls out gradually and may not be available for all devices yet. If haven't got the My Xperia update you could use the Google tracking service instead in the meantime. Go to https://www.google.com/android/devicemanager for more information.
What are your thoughts about this forum? Let us know by doing this short survey.

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

D.p.middleton the Adobe Application Manager has been available for quite some time. It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates. In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
2. this could be due to you selecting a trial subscription to the Creative Cloud? If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
#3 I believe this was already mostly covered in the answer to #2.
#4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
I hope this provides you many of the answers you are looking for? If not please feel free to respond back with any additional inquiries which you have. Also if you are experiencing any difficulties with the update process please post this as well. It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

Something new about for new update for ipod nano 6th generation

Hello,something new about for new update for ipod nano 6th generation , clock faces and others..

What on Earth are you talking about???

Mifi 4510L Mifi Hotspot...is it the network? and what about the firmware update?

I have spent several months trying to seek a solution on the repeated and frequent disconnects from the Verizon wireless network using my Mifi 4510 L. No success. I have conversed with Verizon Wireless "experts" on this matter and have basically been ignored, since they do not have a solution. It has cost me a pretty penny in wireless costs due to lost connections in downloads, etc...for which I do not get any credit from Verizon on my wireless bill...go figure.
I have even been accused by Verizon that the problem is my computer and hardware, even though I have ran several hardware, software, and "real-life" connection checks on other wireless networks with no issues at all. I even have been getting better connectivity when I use my Verizon USB UML290...but I hate having to switch moving my SIM card from the USB Modem to the MIfi4510L...one of these days the SIM card will fail. Verizon has checked the signal strength at my home and work locations (which I already knew as good), but never heard back from them.
Anyway, I have verified that my wireless network adapter works just fine on other wireless networks (no dropouts, etc). I have even upgraded to another Windows Operating System - Windows 7...which is more superior than Vista in dealing with wireless communications. I have implemented quite a number of the solutions provided by other great Verizon Wireless Community members, but the connectivity problems continue to occur.
When I did a review of my wireless hardware logs, I noticed that when I was encountering problems, the dynamically assigned address given to me on the Verizon Wireless network changed quite a bit, even when I was using the same web site. When my wireless connection worked fine, the dynamically assigned address was consistent. This seemed to change when I encounter peak network load times.
I would appreciate a straight answer from Verizon Wireless on what is going on with the network. I live in a solid 3G coverage area...but just far away from 4G to benefit for the increased throughput. The closest 4G location footprint is about 40 miles away from me.
Finally, what about the Mifi 4510 L firmware update? I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
http://192.168.1.1/mifi.cgi
What gives?
I realize that I am sounding a little perturbed about this matter, but it has been almost 4 months now...and Verizon is not living up to their part of the bargain on providing good tech support on the Mifi 4510L. When they do not have an answer...they ignore the customer. Not good business!!!
Kevin Smith
Metropolis, IL

kescom11 wrote:
Finally, what about the Mifi 4510 L firmware update? I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
The firmware update was released a few weeks ago and there were multiple threads in this forum for it:
Software Update: Verizon Wireless 4G LTE Mobile Hotspot MiFi™ 4510L
The firmware update primarily addresses a problem with the MiFi switching from 3G to 4G and back. I would not expect it to resolve a connection issue for anyone in a 3G only area. Work through the firmware update instructions included in the link above and see if it helps.
There were no email notifications but the MiFi should have been redirecting you to the MiFi homepage every time you tried to browse the internet. The firmware update is mandatory so if you have not already completed the update then there might be something wrong with your device.

Problem about SMC Firmware Update 1.7

So I was browing and suddenly a notification pops up about OSX update. It was about SMC Firmware Update 1.7
I am using a MBP 15" Late 2011. ( OSX Version 10.8.2 )
I did clicked update and it asked me to restart. But instead of a restart it automatically logged out. So I logged in and clicked Update and then when it asked me for restart it clicked restart. So now it showed me a Grey screen, the cursor was still there. The cursor was still moving. So I though now this is getting updated but it didn't showed any window of Software update for 20 mins. I assumed it was downloading the update.
The update is just 1 MB or something and I have a connection of 2Mbps so 10 mins were too long I guess. I had to shut the mbp by holding the power button. after 2 mins I press the power button. it started and showed the window of software update and downloaded it automatically and updated, fans went on full speed as mentioned in the update.
Now that I check my firmware version. It shows me " SMC Version (system): 1.69f4 "
My question is shouldn't it be SMC Version : 1.7 ? :|

That's the right FW version. Apple is all screwy with numbers. There posted FW update 1.7 mean just about nothing.
If you want to save yourself a few headaches turn off the Auto Update system and then periodically run Software Update. If there are updates look at what they are and you can pick and chose which ones you install. If you don't need it, the system is running fine, there is no good reason to constantly do updates.
This also give you a chance to look at the support document for the update and do a google search to see if there are any problems being reported.

Someone please clarify some things for me about this Gingerbread update.

Alright... Someone please help me with some information. I hate to sound like I'm living under a rock, but I'm confused about this update I keep hearing about. How do I know which update I have? A couple months ago, maybe, I was just tinkering with my settings and selected "about phone" and it said there was an update available, so I downloaded it, and it changed the appearance of my home screen and different other things, but my phone worked just as good as it did before, so that is all that I noticed about it, that it looked different and I liked it, so I was happy with it. A couple of weeks ago I started having problems out of the blue with my multi-touch keyboard. I googled this forum and made an acct and someone named Cody was helping another user with the same problem, which was selecting space while texting and it taking away the keyboard leaving you to select the text space again, only to hit space and have it go away again, which forced me to use periods after every word so I could avoid hitting space. Anyway, he said to turn word prediction off. It worked for the guy he was helping, and it worked for me as well. I was happy and thought everything was back to normal. Well, a few days later I noticed that while texting if I hit the period symbol, exclamation point, question mark, or any other symbol or punctuation mark, it freezes what I pressed on my keyboard and the keyboard will not go away. I can exit out of text messaging, and get back to my home screen however the keyboard is still frozen on the screen with the symbol pressed down. Also I have an issue with my camera flashing on and off when I am trying to take a picture, and it will not let me snap a shot. I push the buttom down to auto focus and it just flashes on and off on the camera screen, the flash will sporatically come on and off and it's just all shot out, just out of the blue. I went into settings for my text msging and just unchecked everything, to see if that would help. I wrote 2 msgs using punctuation purposely and had no problems. But, my camera still will not work. Is this all because of this update that I downloaded? I just see a lot of people complaining about Gingerbread update and I don't even know what I have. I also had no clue that it's a good idea to reset your phone before or after an update. I didn't do this. I just updated my phone. Will it do any good now to reset it to its original state? I don't understand that at all because it would seem like if I reset the phone to factory.... wouldn't that take away the update that I downloaded anyway? I'm so confused someone please set me straight! Sorry for the long post but really I am just trying to understand what's going on with my phone. Thanks for any advice/help.
[minor edit to remove potentially sensitive phrase]

Welcome to the forum.
OK, as far as which version you have, it sounds like you got Gingerbread. If you go into About Phone, GB is Android version 2.3.3 and the System Version is 4.5.596....
As far as the Keyboard issue, many have had success by turing off the word prediction, as I mentioned. Others have not. Some have had luck by first doing a Clear Caceh procedure (see below). The next step after that is a Full factory reset (which is what Verizon will likely have you do if you get them involved). Personally, I have yet to need to do the Factory Reset - others have and even go as far as recommend it.. So I would start with Clear Cache and see if that helps. If not, do a Search for "In and Out of Factory Reset" using the search feature above. You really need to undertsand it before blindly jumping into it. Good luck.
Wiping cache partition
Power off
Power On Holding Home Key
When Andy with Exlamation Point Shows up Press BOTH Volume keys
Use Volume Keys to navigate to "wipe cache partition" and tap power button to select
Wait for it to finish and select reboot system

About FM BAPI_BUPA_CENTRAL_CHANGE update

Similar Messages

Maybe you are looking for