About get a product detailed information

why I get a sku's displayName and description and so on .I have use the CatalogItemFilterDroplet droplet ,if not use it,I can't get that.

Yes. You can do this with Flash Lite 1.1. Have Flash Lite do
a loadVariablesNum() call and target a PHP file. Then have the
Flash Lite movie loop until it reads a specific variable form the
PHP file (for instance, myEOF).
Within the PHP, echo your variables out to a name/value pair
such as:
variable1=this&variable2=that&myEOF=yes
Refer to Alessandro's article on the DevNet for more
information.
http://www.adobe.com/devnet/devices/articles/flashlite11_rss.html

Similar Messages

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid. When I tried to type this in for registration, it does register as this numbers also contain letters in it. Apparently the registration boxes accept numbers only. What do I do with a useless product for which I have paid good money for it?????

This is the simple solution which was offered to me when I tried to get the serial code on line.
The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
I is really frustrating, spending the last two hours trying to get my product going....

I received an email from Apple that I won a large sum of money in the Lotteries undertaken in your company, I can get you more detailed information about Winning if it is not nonsense

sos

On a broader note (especially prevalent in PayPal circles) ...
Few legitimate businesses send "click this" as the only way to access their internal sites. Your bank sends e-mails telling you that something occurs, but tells you to access their site manually or by calling. And PayPal even says that you should manually access their site with a typed unsername/password.
If you mouse-over an apple-link that shows up as "[email protected]", you stay far away.
It is a dangerous place in e-mail-land.

Where can i get detailed information about exchange ???

Hi,
I am looking for detailed information about Oracle Exchange product. What about a testing architecture, what about integration of erp systems, catalog architecture and so on. ... could you help me?
thank you. if you have some good whitepapers or so, just send it me please.
marc

For more information about the Oracle Exchange Marketplace software, please visit the following URLs: http://www.oracle.com/applications/exchange/index.html?content.html http://www.oracle.com/appsnet/products/exchanges/index.htm
For more information about Exchange and XML integration, sign up for Oracle APP Net and search on Exchange and XML.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by marc fischer ([email protected]):
Hi,
I am looking for detailed information about Oracle Exchange product. What about a testing architecture, what about integration of erp systems, catalog architecture and so on. ... could you help me?
thank you. if you have some good whitepapers or so, just send it me please.
marc<HR></BLOCKQUOTE>
null

Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

What is the information we can get the through details tab in RSMO

Hi to all,
Currently I am working for P.support project, All of you well known about the importance of Details tab in rsmo screen. Here we have 4 options from where we can get more informaiton...
1) Reqest
2) Extraction
3) processing
4) Datapacket information..
Any one of you pls explain briefly about these options. Any documents regarding these will help me a lot...
My concern mainly about... How these ooptions are realated to each other...
Thanks in Advance....
Rgds,
Venkat....

R for Requests says whether the request is working in general ok or not
E for Extraction says whether data received and scheduled. How many records are sent for extraction and how many are received for extraction.
T for Transfer IDocs indicates how many data packages are there for extraction and how many records arrived in each data packages for extraction.
P for processing indicates transfer rules,update rules and update and processing have any errors or not.
P for Process Chain will indicate whether it worked ok or not if there is a process chain and load is successful or not.
Hope this helps please assign points if it does.
Thanks
A. Ramasubban

Where can I get detailed information on using new 2.2 features/upgrades?

For example, the new Return to Home feature in Safari. I don't get this one at all. Pushing the Home button while browsing in Safari takes me to the regular Home (menu) page like it always did. Since I can't find any instructions or detailed information for this feature I don't have a clue as to what I'm supposed to do/see. One would think that every new feature/upgrade in version 2.2 would be adequately explained somewhere. ??

I guess I should explain it better. I know that if I'm in a app and hit the Home button it will take me make to the Main Menu screen. What's happening is that if I on, say, page 3 of a website and hit the Home button, it takes me all the way back to the Main Menu screen. I expected, based on what I've read about this new feature, that if I was a page 3 of a website and hit the Home button that it would take me to the first page of the website. I'm just really confused about this new feature as it doesn't seem to do anything that I'm noticing.
??

Detail Information about all CPU IN Linux x86_64

Hi all,
How to get Detail Information about all CPU in Linux x86_64. Like number of cpu, utilisation, idle

user13549752 wrote:
Hi all,
How to get Detail Information about all CPU in Linux x86_64. Like number of cpu, utilisation, idle$ less /proc/cpuinfo ---cpu information
$ grep processor /proc/cpuinfo
$top ---command will show cpu utilization,idle time
# mpstat
mpstat -P ALL
# sar -u 2 5
refer:-
http://www.cyberciti.biz/tips/how-do-i-find-out-linux-cpu-utilization.html
for dba related linux commands refer,
http://gavinsoorma.com/unix-for-the-dba/
http://www.oracle-base.com/articles/misc/UNIXForDBAs.php
http://blogs.oracle.com/myoraclediary/entry/useful_unix_commands_for_dbas

How can I get more detail information ( Sales Order ) of Reduction of PIR??

Hi Experts,
In our company,our customer want to see more information about the reduction process for the planned independent requirements.
That means for example:
First we create 150 pc planned independent requirement for material "ABC".Then we create a sales order for material "ABC" for 20 pc.After that we do the delivery for this sales order,post the goods issue. So after the outbound delivery, the planned independent requirement for material "ABC" will reduced to 130 pc.
Although in TCODE:OMP4,we have active history is updated when planned independent requirements are reduced by a goods movement. So in MD73 we can see the withdrawal quantity 20 pc for this planned independent requirements.And in md63 we also can see the withdrawal quantity (20 pc) for this schedule lines.
But we can not see the detail information about the withdrawal quantity!!
We can not directly know this withdrawal quantity is caused by which sales order???The sales order number???
So I want to ask how can I directly see the detail information about the reduction of planned independent requirements??
That means how can I directly know this withdrawal quantity is caused by which sales order???The sales order number???
Thanks for any reply!!!

Dear Liu,
check the material document posted in T Code MB51 for 601 movement.
Here you can get the details regarding the customer,and check for the same material,customer combination in T Code VA05.
Check and revert back.
Regards
Mangalraj.S

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

PLEASE GIVE ME DETAIL INFORMATION ABOUT MARKETPLACE ADAPTER,ONE EXAMPLE ALS

DETAILED DESCRIPTION ABOUT MARKETPLACE ADAPTER AND ONE EXAMPLE ABOUT THAT

Hi Sridhar,
For more information on the Marketplace Adapter and it's feature, go thro' the below link:-
http://help.sap.com/saphelp_nw04/helpdata/en/1a/ef487f5b680f4c84d632cfe76ec8cb/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/b3/30cc3fbeb83946e10000000a114084/content.htm
Hope this helps.
Regards.
Praveen

Regrouping detail information to get summary result

Hi gurus, I'd like to know if and how the following can be achieve. I have a data template that generates details information for a project. I use this information on the detail template but now I wan't to create a summary section that would use the same data template but would regroup data differently. I would like to summarize some amount based on another hierarchy that it is used in the xml data template.
Actually, the following structure is used to display organization/project/tasks/category/resource info
<LIST_G_ORGANIZATION>
<G_ORGANIZATION>
<ORG_NAME>AAAA</ORG_NAME>
<LIST_G_PROJECT_INFOS>
<G_PROJECT_INFOS>
<PROJ_NUMBER>1234</PROJ_NUMBER>
<PROJ_NAME>CTAB</PROJ_NAME>
<LIST_G_TASKS>
<G_TASKS>
<TASK_NUMBER>1</TASK_NUMBER>
<TASK_NAME>A</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L1</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT1</RESOURCE_NAME>
<ACTUAL_COST_AMT>10</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>20</ACCRUAL_COST_AMT>
</G_RES>
<G_TASKS>
<TASK_NUMBER>2</TASK_NUMBER>
<TASK_NAME>B</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L2</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT2</RESOURCE_NAME>
<ACTUAL_COST_AMT>30</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>40</ACCRUAL_COST_AMT>
</G_RES>
<PROJ_NUMBER>456</PROJ_NUMBER>
<PROJ_NAME>CTQC</PROJ_NAME>
<LIST_G_TASKS>
<G_TASKS>
<TASK_NUMBER>1</TASK_NUMBER>
<TASK_NAME>A</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L1</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT1</RESOURCE_NAME>
<ACTUAL_COST_AMT>15</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>25</ACCRUAL_COST_AMT>
</G_RES>
<G_TASKS>
<TASK_NUMBER>2</TASK_NUMBER>
<TASK_NAME>B</TASK_NAME>
<LIST_G_CAT>
<G_CAT>
     <CATEGORY_NAME>L2</CATEGORY_NAME>
<LIST_G_RES>
<G_RES>
<RESOURCE_NAME>CT2</RESOURCE_NAME>
<ACTUAL_COST_AMT>35</ACTUAL_COST_AMT>
<ACCRUAL_COST_AMT>45</ACCRUAL_COST_AMT>
</G_RES>
So in detail section, it is shown based on the hierarchy organization (AAA) - Project (1234, 456) - Tasks - Category - Resources.
In the summary section, I'd like to remove the "Project" level and summarize all the amount under resources for the organization, meaning that I'd like to know the sum(actual_cost_amt), sum(accurual_cost_amt) for the entire organization and not for a specific project.
1 - Is it possible to accomplish that with the detail data template ? Is so, I can I sum these amounts and regroup information and skip project notion ?
or
I've to create another query in the data template to get what I want.
Thanks a lot.

I managed to have the solution. Using a for-each-group like below. It regroup all the resource name under any projects.
<?for-each-group://G_PROJECT_INFOS//G_TASKS//G_CAT//G_RES;./RESOURCE_NAME?>

About get a product detailed information

Similar Messages

Maybe you are looking for