About Html5 stereo view

As we can see 3D video in youtube if we installed adobe player with that feature called html5 stereo view, my question is is html5 would automactically support 3D? Or is html5 stereo view a special extension or feature towards html5 that only youtube uses? Or would other html5 player can see 3D as well? Thanks

1. HTML5 (MP4,OGG, WebM) video DOESN'T require Flash Player. THAT'S the purpose of HTML5 - to eliminate the need for it. It's why ANYONE building websites for mobile devices uses HTML5 - because tablets and smartphones don't run Flash Player.
2. There IS NO SUCH THING as an HTML5 player. Your browser is the player. HTML is the code in the page and HTML5 is the latest standard for it.
3. There IS NO Adobe Flash Player with HTML5 Stereo View that I know of. Especially considering that HTML5 doesn't require Flash.
Don't know where you got a "Flash Player" with HTML5 Stereo View, but it didn't come from here.

Similar Messages

  • I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

    I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

    Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
    http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

  • How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

    Hi guys,
    Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues....  :-)
    Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-)  ......
    Query :    How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
    Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
    I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
    Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
    Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
    Thanks

    There are various ways to do this in Audition 3. here's one.
    Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

  • Confused About About Logic Stereo Issues

    I'm not sure if any of this is true or not - but I have heard some talk about the stereo spread imaging in logic not being as wide in the mix as it could be. I think it had to do with using a stereo track vs two mono tracks instead.
    Is any of this true? Is it better to use 2 mono tracks rather than one stereo track to get a wider stereo spread?
    Someone else mentioned that it might be a good idea to use some sort of existing logic plugin to help widen the stereo spread on these stereo tracks. There is a special logic plug-in called " stereo spread " - would this be the proper plug-in to alleviate this issue? Is it really needed?

    Yeah, but what about the right?
    Mono forever!
    That doesn't answer my question though. I think you're avoiding the issue here. I see you're leaning heavily toward the left, and that's not...
    ...right...
    I was going to say that this stereo spread issue
    (if it can
    even be called an "issue") is a pan laws thing.
    But I already did it for you...
    I am merely in agreement. Can we just agree to agree?
    (hee hee!)
    -=iS=-

  • Encore Flash Output: What about HTML5?

    I absolutely love the DVD (and Blu-Ray?) output to the Web feature of Encore. I've used it many times for my wedding videography clients to have an on-line version of their wedding they can share with friends and family.
    However, the biggest drawback has long been that Apple Iphones/Ipods will not play them. And therefore Brides or Grooms cannot show their friends or family their wedding while visiting them, unless they're at their computer, and if they have the latest version of flash, and so on and so on.
    And lately HTML 5 has entered the web video discussion. Many know about Apple's resistance to Adobe with the Flash issue. And now, did I just read that Google Android will stop supporting Flash?!
    As much as I love this feature I am greatly concerned it will fall by the wayside. And more importantly, all the previous wedding video Flash versions of my DVDs I have already made. I am worried all my hard work will have to be re-captured from a video DVD disc in order to view on the web in the future.
    My question is, what is Adobe doing to address this? It would be incredible to see some kind of side conversion program to convert Encore Flash DVD files to HTML5 or something compatible with smartphones and portable devices. 

    >what is Adobe doing
    Nobody who knows (employee or Beta tester) is allowed to comment on Adobe's development efforts in advance of a product announcement by the CEO
    Tell Adobe what you want here https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Newbie question about entity and view objects

    Hi everyone,
    My first ADF application in JDeveloper is off to a difficult start. Having come from a forms background, I know that it is necessary avoid using post-query type lookups in order to have full filtering using F11/Ctrl+F11. This means creating an CRUDable view and getting as much of the lookup data as possible into the view without losing the ability to modify the data. In JDeveloper, I do not know how to build my data model to support that. My thought was to start with a robust updateable view as my main CRUD EO and then create a VO on top of that with additional EOs or VOs. But, I have found that I cannot add VOs to another VO. However, if I link the VOs then I have a master-detail which will not work for me.
    For example, I have two joins to CSI_INST_EXTEND_ATTRIB_V shown in the queries below and need to have that show in the table displaying the CRUD VO’s data. It seemed that the best way to do this is to create a CSI_INST_EXTEND_ATTRIB_V entity object and view object. The view object would have two parameters, P_INSTANCE_ID and P_ATTRIBUTE name. Both the building and the unit are needed on the same record, and this is not a master-detail even though it might look that way. (A master-detail data control will not work for me because I need all this data to appear on the same line in the table.) So, I need help figuring out the best way to link these to the main (CRUD) view; I want as much of this data as possible to be filterable.
    select
    cieav.attribute_value
    from
    csi_inst_extend_attrib_v cieav
    where cieav.instance_id = p_instance_id
    and cieav.attribute_code = 'BUILDING NAME'
    select
    cieav.attribute_value
    from
    csi_inst_extend_attrib_v cieav
    where cieav.instance_id = p_instance_id
    and cieav.attribute_code = 'UNIT NAME'
    Ultimately, I need to display a ton of data in each record displayed in the UI table, so a ton of joins will be needed. And, I need to be able to add records using the UI table also.
    James

    Hi Alejandro,
    Sorry if I caused confusion with my first post. What I had in mind assumed that I could have a single CSI_INST_EXTEND_ATTRIB_V EO with a BuildingVO and UnitVO on top of it. So, I wrote the queries individually to show how I would invoke each view. When I realized that confused the issue, I rewrote the query to explain things better.
    Now having seen your 2 queries. You need to create 2 EO. One for each table. Then create an association between the 2 aeO (this will be the join you are talking about). Then, you need to create a VO based on one of the EO and after you can modify and add the second EO (in here you select the join type).
    After your done with this, youll have 1 VO that supports CRUD in both tables.
    There were three tables in the query: CIEAV_BUILDING, CIEAV_UNIT, and T -- the main CRUD table. When you say that I should create two EOs, do you mean that they are to be for CIEAV_BUILDING and CIEAV_UNIT? Or, CIEAV and T? Assuming CIEAV and T, that sounds like it would allow me to show my building or unit on the record but not both.
    By the way, everything is a reference except for the main CRUD table.
    Look forward to hearing from you. Thanks for your help (and patience).

  • Table which has info about all "Query views" in the system

    hi all,
    which is the table that stores information about all the "Query views" present in the system?
    i searched in tables RSRREPDIR and RSZELTDIR, but i could not find any query view that is already present in the system.
    regards,
    Rk

    To know execution time, execute the query and then analyze the table RSDDSTAT using t-code se16..
    i think u need to check the value of  QTIMEOLAP var in the table for getting query execution time..
    more info please refer the note 130696
    U can execute query in RSRT also after setting options for Statistics

  • About Mono/Stereo working with Logic 9

    Hello guys,
    I´m new member here... I hope to share here with you great audio experiences.
    Sure... i´m new Logic 9 pro user too. So i have no much idea about some things.
    As I could see in other discussions, we have great geniuses of the audio here and that's really nice!!!
    So... i have some questions:
    1) When i´m using MONO channels (with vocals or drum elements) and then send these channels to a STEREO group, with reverb, eq, etc... all the things BECOME stereo or they are given only ´´filling´´ stereo as additional ´´space´´?
    1-2) About this same question... shoud i send these elements MONO channels to MONO group?
    2) I love to create my own song textures... and to make my kickdrums, i always use MONO channels with appropriate layers audio, such as a layer with the bass/fat part, another layer with the mid and end with the clicks or high part. So i send them all to a MONO group where i equalize and glue everything with tape, compressor, etc... so... To me it´s very good, but someone can tell me if that´s the way?
    Please fell free to give your opinions.
    Thank you very much

    I'm using the Duet with 10.5.8 and LP9, everything is smooth.

  • HTML5 Report Viewer

    Hello,
    I was wondering if SAP or some partner has a true HTML5 crystal report viewer (not a web forms one) that can work with ASP.net MVC?
    Most workarounds that I have seen so far on the web is to export the report (from the engine) as a PDF into a memory IO stream and pass it to the client... I am was hoping that I can find a compatible viewer to keep the drill downs and navigations features. 
    Thanks,
    JR

    Ken Hamady keeps a good list of 3rd-party add-ons that are available for Crystal at www.kenhamady.com/bookmarks.html.  You might be able to find something there.
    -Dell

  • Images are stretched HTML5 output viewed in IE8. Workaround?

    The images in my HTML5 output are being stretched vertically when viewed in Internet Explorer 8. I know there are HTML5 issues in general with IE, especially older versions, but is there a quick fix for this? I've attached an example below. The first image is supposed to be the search icon (magnifying glass) and the second is a little printer icon. Both are stretched vertically.

    Hi,
    I’ve not been paying much attention to the forums the last couple of days. Sorry for the late reaction.
    The problem is that the image is stretched and IE8 incorrectly interprets this as that it has to stretch the image. If you are using IE9 in SharePoint (IE8 isn’t officially supported), you can press F12 and set the rendering mode to IE9 standards mode. This will make the output behave.
    Greet,
    Willam

  • Noon question about removing crosshair view

    I hit a key and now I have a view over my composition of a crosshair look which I heard means its allowing a small window in the center to be ram previewed rather than the whole comp.  How did I turn this on and how do I remove it?  Thanks.  (After effects cs5)

    I'm not sure if we are talking about the same thing.  I am supposed to be able to remove the region of interest view by clicking the button for it and that doesnt remove this is just lets me make on in the first place.  I am talking about a wireframe look over my comp with a bunch of squares on the border and a cross in the very center.  Is this the same thing?

  • Questions about the stereo jack p

    Hi everyone,
    I , citizen of the Netherlands,Europe, have some questions about the well known problem stereo jack defect.
    - What is the warranty-period of the Zen Micro , in case my stereo jack will fall out?
    - How to get a RMA and how long will this take to get it done and sent... will it cost me a bomb (sent and repair costs)?
    - Do you get a NEW one back or do they repair the old one for you? As far as i can read it here the chance is big a NEW one will get the same problems one day.. ;P
    By the way, it suprises me that the company is still producing these "wrong" micro's, this problem is known for months!Wouldn't it be cheaper for them to just produce the right ones immediatly instead of repairing them?
    Hope anyone can help me out
    Thanks in advance
    A owner of a Zen Micro White and afraid to get the stereo jack problem one day :P

    Thanks SSR for your reply.
    I was wondering how serious the jack problem actually is... according to the posts here it seems very common to have these problems. But this can be misrepresented because this is maybe just the tip of the iceberg.
    Maybe are there anyone who have the Zen Micro for at least 6 months and WITHOUT any problems?
    thx

  • DW CS5 question about page layout viewed in different browsers

    Hello.
    I am still very new to Dreamweaver CS5 and I need help with the appearance of a new website that I have been creating. We are mac based and I'm currently using Mac OS10. The layout I have created should appear centered on the page and it contains a solid background image. When I view it on our macs using Safari, everything looks exactly as it should, but when viewing it on a PC using the Internet Explorer 8, the text, spry menu bar and image of a doctor on the right hand side (that is set to change every time the page is refreshed), all shift to the right. Any advise on fixing this issue would be extremely helpful. The index page and the pages under the obstetrics menu are the only ones that I have completed so far. Here is a link to the web page: http://www.advertools.net/COBGYN/index.html
    Thank you for your assistance.

    Hi
    Yes, I am referring to the fact you are using absolute positioning for the divs, and that this is causing your problems.
    If you change the top, left/right values you are using to position them to % values this will alleviate the problem, (not completely though). Instead of say -
    top: 500px;
    left: 450px
    use
    top 70%;
    left: 40%;
    The values are only examples and you will have to adjust these to suite your needs.
    PZ

  • Any suggestions about my problems viewing videos?

    I have had my computer for 4 years now and with Adobe Flash Player installed I have had no trouble viewing videos etc. However, recently I have been unable to view videos and it keeps telling me that I need to download Adobe Flash Player. Even though I thought this was already on my computer, I go ahead and download it. It tells me I have successfully downloaded it. But I still can't view videos. It KEEPS ON telling me I need to download Adobe Flash Player.  Anyone know what's going on???

    Flash Player Help | Installation problems | Windows
    Flash Player Help | Installation problems | Mac OS
    Mylenium

  • About APEX Calendar views (monthly, weekly, daily)

    Hi,
    How can I display a DAILY APEX CALENDAR?
    I read in some APEX-related articles that it is possible to have 3 different views: monthly, weekly, and daily.
    example 1. http://insum-apex.blogspot.com/2008/07/apex-calendar-enhanced-behavior.html
    example 2. http://examples.apex-evangelists.com/pls/apex/f?p=286:29:0:::::
    I tried to follow the directions given in one of those examples but I found out that the tags in my local environment differ from the ones shown in the example. I don't have the MONTHLY CALENDAR, WEEKLY CALENDAR and DAILY CALENDAR tabs mentioned in the example.
    Please help.

    Hi user10284066,
    Thank you for mentioning this link http://insum-apex.blogspot.com/2008/07/apex-calendar-enhanced-behavior.html
    in this forum. Helped a lot.
    For people who want to know where to find these tabs,
    Home>Application Builder>Application XXX>Shared Components>Templates
    select calendar and you must see those(monthly, weekly, daily) tabs under
    Home>Application Builder>Application XXX>Shared Components>Templates>Edit Calendar Template
    or upgrade to a newer version

Maybe you are looking for