About HTTP Internet mode setting for Nokia & Samsung devices.

Hi all,
I�ve a J2ME app. wich must run in several devices. I configured and tested it in my Motorola-V300 and SonyEricsson-K300a withow problems.
Now, I must do the same with Nokia and Samsung devices but, unfortunatelly I�ve not them in order to configure and try.
Motorola/SonyEricsson devices has a profile option where to setup "Internet Mode = HTTP" (no WAP) but I cannot findout in internet or phone manuals how to especify HTTP into Nokia and Samsung phones. I asked support teams here (Argentina) and they said me that it�s not possible and only wap is alowed. I cannot beleave it.
Please, could somebody tell me where/how to do it ??. It�s very important for my.
Lot of thanks in advance,
BlufsteinEJ.

try using wap seetings (apn)
see
http://forum.java.sun.com/thread.jspa?threadID=732967&start=15&tstart=0

Similar Messages

Internet calling software for NOKIA N82

can u please send me link for internet calling software for NOKIA N82
which one compitable with my mobile NOKIA N82
thank you
regards
taher ratlamwala

There are plenty of them around such as Fring, Gizmo etc etc etc.
However, my favourite at the moment is Fring because it allows me to call my friends on Skype, Msn, Yahoo etc etc for free, while also allowing me to call mobiles and landlines at a nominal cost using my Skypeout account.
You can download Fring from
www.fring.com

Flash player problem for nokia belle devices

hey nokia family..
i am a user of nokia n8 and that is my favourite cell phone but now there is no update available for nokia belle devices and these devices do not support adobe flash player any more, even 808 pure view is one of the new devices by nokia but it is also unable to stream videos over net, so this is a request to nokia family that please do not forget his old customers and belle users and please give an update for these devices..
regards

Adobe are the ones who are in control of Flash for mobiles and they took the decision quite a long time ago to stop all support and development for Flash for all mobile devices.
You will not therefore be receiving any further support from anyone regarding Flash for your mobile devices.

Setting for Nokia 202

how to set GPRS for Nokia 202 daul sim and it's internet connection.

You need to first get a Data plan activated thru' your Operator. Once done, remove and re-insert the SIM. Most probably the settings will be received on its own. Else, request your Operator to send the settings. These will normally come thru' an SMS. When you receive, open and select SAVE.

Improvements for nokia s40v5 devices

Hi I was just thinking... I think this is a good idea for nokia and nokia users...
So here's what i mean... all of us have nokia phones right? some of us has nokia phones that runs the nokia s40v5 operating system right?so i was jus thinking...for the upcoming firmware updates for them, can you add some brand new features like "HomeScreen" which s40v6 has and s40v3 has it... why s40v5 doesn't come with active standby or homescreen?
here's another feature that you guys may like. In music player themes, instead of default music player themes installed on the phone like black, squares, sound waves, and some music player themes, the music player theme/background will be get in the themes (the .nth file)not in the mobile phone itself.
Another feature that you guys may like is the new gallery, just like the one's in nokia c1-01 and nokia c3-00.
Another one is the facebook client just like in nokia c3-00, x2-01.
another one is smart dialing, which is just like when you typpe 5555, the phone will say that's mom's number(09165555882).
Another one is the improved video recording... Instead of QCIF (176x144) resolution, use QVGA(320x240) or VGA(640x480) recording resolutions at 15fps and recording it with a mp4 codec... The video recording will result in crystal clear shots!!!
The one and the most important features that the s40 phones should get is multitasking... Yes you heard it right, multitasking. Just like in smartphones, nokia s40v5 devices should get multitasking. But always there's should be a limit to prevent the phone to crash although almost all nokia s40v5 phones has only 2.1mb of RAM(according to memoryUP pro application)...
If it's still possible, by only software update, the RAM may be increased for just like 10mb or more (phone memory will be used although we got memory cards right???)
what do you think guys and nokia developers, what do you think??? is this a cool idea???

Unfortunately S40v5 won't be gaining any of the major features found in S40v6 models. Time has moved on so if you want the features found in S40v6 devices you will need to buy one.
You are welcome to start a new thread giving suggestions about what you think should be added to the current (S60v6) or future operating systems.

Where i can find firefox for nokia symbian device ?

there is any way to use firefox for my symbian S60 or symbian^3 nokia smartphone ?.

The article '''mbrubeck '''links to on the "''future''" says: "''We are working to bring Firefox Home to both Blackberry and Symbian platforms in the coming months''". That was over a year ago. Ahh this IT land of casually discarded hopes and promises.
The only option for Nokia users now may be to defect to Opera. There are two versions of this (Mobile and Mini) and both work well on my N97 mini (S60 5thEd). Sad to discover this, as I was just getting enthused about the Synch facility on Firefox.

Developers- How about a Visualizer mode/setting(s) for "NOW PLAYING" artwork.

Jacket Junkies, like myself, would love it. (Yes, I know about Album Art Screensaver.) Thanks.

I have a little related question about a bug I've got. Would you have any ideas about this?
I've got a bit of a problem with the Now Playing window that should pop open and act as a player-window, with the artwork of the song filling the space. This function was working for me but it's now stopped. When I click on the Now Playing image it tries to open, adding a tab to the task bar, but then I can't expand the window. This has happened before and then righted itself but there must be some reason why it stops. I've recently been updating a lot of song artworks. This could be related. Is this an iTunes bug or is the fault with my computer? Any fixes that you would know of?

Access mode setting for query

Hi,
I want to know where to set the following access modes for a query ?
NEW (default): Uses current data.
STORED: Uses pre-calculated data (if no pre-calculated data available, this results in an error).
HYBRID: Uses pre-calculated data if available; if not, it uses current data.
STATIC: Uses pre-calculated HTML pages (if no pre-calculated pages are available, this results in an error).
STATIC_HYBRID: Uses pre-calculated HTML pages if available; if not, it uses HYBRID access mode.
thanks,
D Bret

Hi,
this is part of the Web Template properties. You can set them either via additional URL parameters, or change the corresponding Web Template in the WAD.
http://help.sap.com/saphelp_nw04/helpdata/en/1f/37813b650cdc0be10000000a114084/frameset.htm
look for read mode
or add the parameter &data_mode=... to your url.
Heike

Kernel mode setting for non-recognized monitors

I'm running kernel, xorg-server and xf86-video-intel from testing with KMS enabled, and while it certainly feels smooth and responsive there is one irritating bug related to kdm logout.
Anyway, looking at /var/log/messages.log I see a line
Sep 30 18:20:51 alix kernel: [drm] DAC-6: set mode 1440x900_60 24
Sep 30 18:30:02 alix kernel: [drm] DAC-6: set mode 1024x768 16
which is related to the following fact: xorg doesn't recognize the native resolution of my monitor, which is 1440x900. It's not just on Arch, Ubuntu doesn't get it either. So I have to add a modeline to xorg.conf.
But now I'm wondering if this might cause a problem with KMS. KMS is supposed to set my monitor to its native resolution (right?), which it cannot because the system doesn't know my native resolution until it reads xorg.conf, which the kernel doesn't.
So: could that be a problem?
Last edited by grey (2009-09-30 17:51:11)

With early KMS enabled, both suspend and hibernate broken on Thinkpad T400 with Intel graphics. For suspend, the laptop cannot actually suspend.(Screen go black and seconds later bright again); For hibernate, however, resuming from hibernation runs into blank screen, Ctrl+Alt+F1-6 doesn't work either. Only hard restart can get out of this.

Restoring Factory Setting for nokia 5800

i just installed a new theme for my nokia 5800 then when it was installed i tried it then suddenly my phone hanged and i cant press any buttons. I removed the battery and switched the phone on again then now my phone is running real slooooooow now i can't even unlock the keys now!!!!! ... anyway i was thinking that i'd restore the factory setting of my phone it will run smoothly again. anyone knows how to do it?? thanks in advance

From Ovi store you can set your account preferences to install to memory card, whenever I sideload applications, the phone usually asks where I want to install. Not everything can be stored to memory card, most Nokia stuff insists on installing on C and so only install Nokia software you REALLY need or want !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Need help with mms setting for nokia 5800 on T-mo...

Ok I'm also having problems not receiving a full size image when sent thru Tmobile, the image shows up as 2kb so when i try to zoom it becomes blurry....
I called tmobile support Tier III and they were not able to help...all i got was an email from them with additional settings to try on my phone but not sure where i can plug that information... it gives the port # the wap information...and so on..
if you are using T-mobile US and can receive picture messaging, could you please send the the settings you are using.
Thanks.

The settings on a phone receiving an MMS have no bearing on the size of the picture being received. If you can receive anything then the settings are correct. If they were incorrect you wouldn't receive any MMS message at all.
The problem lies with T-Mobile US. Their messaging gateway doesn't "know" that the 5800XM can receive MMS messages up to 600kb in size so it reduces the file size on the fly in order to comply with what it thinks the 5800XM can deal with.
Only T-Mobile US can solve this problem.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Unable to read http response from servlet (on nokia 6630 device)

I am sending a http GET request to a servlet for getting some response. Though I am able to obtain the response when I run my j2me app on sony phone I am not able to get any response in case of nokia. On being asked for the APN on nokia I do select the correct one and my settings are correct too. Moreover I am able to connect to the servlet without any problems from my nokia device. However when I tried to read from the Input stream the value returned by read() is -1.
The code works fine on emulator also. Here is the code snippet being used by me. Plz help me solve this problem. Your response shall be definitely appreciated by me.
Code in servlet:
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        String t_username = request.getParameter("user");
        String t_password = request.getParameter("pass");
        URL url = new URL("http://somehost:80/query.cgi?serv=s1&user=" + t_username + "&pass=" + t_password);
        HttpURLConnection head = (HttpURLConnection)url.openConnection();
        head.connect();
        int contentLen = head.getContentLength();
        System.out.println("content length = " + contentLen); //here I get some content length value as expected
        BufferedReader in = new BufferedReader(new InputStreamReader(head.getInputStream()));
        StringBuffer sb = new StringBuffer(contentLen);
        String data = null;
        final String NEWLINE = "\r\n"; //acts as delimiter for parsing response later in my j2me code
        while((data = in.readLine()) != null)
            sb.append(data).append(NEWLINE);
        sb.append(NEWLINE);
        in.close();
        PrintWriter out = response.getWriter();
        out.print(sb.toString());
        out.flush();
        out.close();
        head.disconnect();
    }Code in J2ME:
public static byte[] readFromHttpConnection(String p_URL) throws ConnectionNotFoundException, IOException {
        if(p_URL.startsWith("http://") || p_URL.startsWith("https://")) {
            HttpConnection c = null;
            DataInputStream dis = null;   //tried using InputStream also...still value returned by read() is -1
            c = (HttpConnection)Connector.open(p_URL);
            c.setRequestMethod(HttpConnection.GET);
            c.setRequestProperty("Content-Type", "application/octet-stream");
            dis = c.openDataInputStream();   //able to open this stream
            int len = (int)c.getLength();    //here i get len as -1 for both sony and nokia
            byte[] t_data = null;
            if(len > 0)
                t_data = new byte[len];
                int offset = 0;
                int numRead = 0;
                while((numRead = dis.read(t_data, offset, t_data.length-offset)) > 0) {
                    offset += numRead;
            else //since i get content length as -1 for both sony and nokia, this block is executed, and though
                   //I am able to read data on sony on nokia read() returns value -1 from the start itself
                ByteArrayOutputStream bs = new ByteArrayOutputStream();
                int ch;
                while((ch = dis.read()) != -1)
                    bs.write(ch);
                t_data = bs.toByteArray();
            dis.close();
            c.close();
            dis = null;
            c = null;
            return t_data;
        return null;
    }Edited by: alprazolam on Oct 16, 2007 6:02 AM
Edited by: alprazolam on Oct 16, 2007 6:04 AM
Edited by: alprazolam on Oct 16, 2007 6:07 AM

Strange, this should be fine. You might want to try a more efficient (and shorter and faster) read code:
byte[] buffer = new byte[512];
ByteArrayOutputStream = new ByteArrayOutputStream();
int b;
while((b=dis.read(buffer))!=-1){
bs.write(buffer,0,b);
t_data = bs.toByteArray();No need to check for content length, and always fast. I hope this helps...

VPN from WiTopia setting on Nokia Belle devices

Hallo!
Searched forums and found that the only provider of VPN services compatible with Nokia N8 and 808 PureView devices is WiTopia. In the discussions found that some users succeded to properly set the VPN policy files and enjoy VPN on their N8.
Happy VPN users who was lucky to get personal help frm IsmoK please share the knowlege.
I subscribed to WiTopia, I got the Gateway, Preshared key, downloaded Nokia Configuration Tool (NCC) and VPN policy file (My-mVPN-config.vpn) - but still can't clearly understand how to amend policy file with NCC.
Please share knowlege!

Dude! There's nothing wrong with headphones support in belle. Try a soft reset, nd a hard reset if soft doesn't work. Else, try reinstalling the firmware. Might help.

Setting for SUPER CONVERTER

Hey people.. Anyone know the Super Converter setting for Nokia N82? I need it to convert videos to play on my DivXPlayer.. I'm currently using the build 25 version for the Super converter.. Thanks people..

so i juz follow first example izit??? http://bp1.blogger.com/_PNi76QJR7X0/R9g2reeasLI/AAAAAAAAAE0/40AIyeNH7vc/s1600-h/Super+h264+settings....
wat about the other settings? can i request for a print screen on the full display of the super converter? i need to know how to set the other settings also.. and another thing.. i try to transfer the file over to my n82.. but when i use DivXPlayer, it shows there is no files.. i try using 'Y-browser' to open the file but the file juz wouldn't open.. anyone can help?

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

About HTTP Internet mode setting for Nokia & Samsung devices.

Similar Messages

Maybe you are looking for