About idoc to file scenario
hi experts,
i am getting error while doing RFc connections(R/3 side) in idoc to file scenario, timed out error (cpi_c),
could anybody solve this problem?
Hi friends,
here is new document for IDOC TO FILE scenario..
http://jskcomput.blogspot.com/2013/08/idoc-to-file-scenario.html
Similar Messages
-
Questions about IDoc to file scenario
I 'm confused, and have a few questions:
1, we need to define a product for it at least , assign it to either of the systems?
2, we don't have to configure an IDoc communication channel, do we?
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
4, at least define techinical system and business system for R/3?
Can you explain the sld configuration to me ?
thanks a lot.Hi,
,1) we need to define a product for it at least , assign it to either of the systems?
Ans: Yes we need to define a product.
2, we don't have to configure an IDoc communication channel, do we?
Ans: Sender agreement and Sender IDOC communication channel is not required as IDOC adapter
resides on ABAP stack.
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
Ans: For third party system from ID create the business system and use that Business system for File or
FTP system.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Business System have an entry in the SLD and Buiness Service do not.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
4, at least define techinical system and business system for R/3?
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Ans: Yes : Technical system is a phisical machine, it have a IP. Can be a BBDD, ERP, J2EE ......... a Business System is a logical term that we use into the Business Scenarios and represent these Technical System that we had created.
Can you explain the sld configuration to me ?
SLD is the place where u can define systems that are existing in ur landscape. using these systems u can transfer data from one system to another using PI.
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak - SLD preview
SLD - http://help.sap.com/saphelp_nw04/helpdata/en/6e/fba1c735e0b44496072595092d924c/frameset.htm
Error while reading ID of own business system from the SLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00e7efc-0f27-2a10-d9a2-c46fc3863c20
Check this out
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
Log into SLD and click the Help Link
You will get the detailed documentation for SLD for your version
Thanks,
Satya Kumar
Reward if it is useful
Edited by: SATYA KUMAR AKKARABOYANA on Apr 24, 2008 12:30 PM -
About IDoc to file scenarios, ack not possible
I almost work out this scenario except one error in XI, T-Code SXMB_MONI
Acknowledgment not possible
detail info is "Unable to convert the sender service FTP to an ALE logical system".
Because I create two business service for SAP ERP and FTP, no technical system in SLD.
Of course I assign the Logical system name to SAP ERP, and FTP has no Adapter specific identifiers.
It is not Ok to create another Logical system and partner profile for this.
Is there any expert can tell me what to do in this situation?
Thanks for any suggestion.> detail info is "Unable to convert the sender service FTP to an ALE logical system".
>
> Because I create two business service for SAP ERP and FTP, no technical system in SLD.
> Of course I assign the Logical system name to SAP ERP, and FTP has no Adapter specific identifiers.
> It is not Ok to create another Logical system and partner profile for this.
> Is there any expert can tell me what to do in this situation?
>
you need to do HEADER MAPPING in Receiver Agreement. Just define the sender logical system there and your problem will be solved... -
ABOUT DATA SENDING IN idoc TO file SCENARIO
How the data is sended in idoc to file scenario?
what is the difference in sending data through BD10, BD14 and WE19 ?
Is the data is sended through XI OR R/3 SYSTEM?Hi Rammohan
>> How the data is sended in idoc to file scenario?
Makeing settings in SAP R/3 side then based on the RFC
destination,port,parterner profiles.....
Idoc can hold the data with out any direction but RFC port will direct where to
go ...based on the partner profiles (Out buond IDOCS)
>>what is the difference in sending data through BD10, BD14 and WE19 ?
BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
generally will be in the production(But not for testing) and this will be depending
on the declaration of profiles in the BD64
--- But we19 will be used to test the Idocs with any data
but here we need to give all the parameters like senders,receivers,ls,idoc...
>> Is the data is sended through XI OR R/3 SYSTEM?
Data will send through XI i.e XI will receive the Idoc and Convert into XI specific
SOAP XML message and process all the pipe line steps ...based on the target
it will send
Here target is file so choose the file adapter as target and give all parameters
it will work fine
I hope this will answer your question
regards
--- prasad -
Issues in IDOC to File scenario using bussiness service
Hi Team
I found a blog which explains about the IDOC to FILE scenario by using bussinss services. I followed the steps and finally i am getting a error message while posting an idoc in we19 (ie IDOC 09878 was saved but cannot or should not be sent). The setting which have done on SAP side are as below
SAP SIDE CONFIGURATIONS
1. Created RFC destination : RFC_XI_SYSTEM
2. Created port : PORT_TEST
3. created logical system: IDOC2FILE
4. created partner profiles: IDOC2FILE
XI side configurations
1. Created RFC destination: RFC_SAP_SYSTEM
2. Created port : by using IDX1 t-code
DOUBT: here it is asking for PORT, CLIENT,Description and RFC destination, please let me know what values i need to put here, please find the SAP and XI system details below and suggest accordingly.
3. metadata: by using idx2.
DOUBT: here it is asking for IDOC type and source port, i can give the idoc name but i am not getting what i need to give to source prort field, please check and let me know, please find the SAP and XI system details below and suggest accordingly.
SAP system details
Client: 800
User name: sapuser
system id: DEV
system number:10
XI system details
Client:100
username:xisuper
system id: SXI
system numebr: 00
I request you to please check and help to successfullly completion of this scenario. I request you to please provide me the screen shots of the pre-requiste settings and suggest me the steps to debug the scenario.
Thanks in advance.
RajuTo complete your scenario successfully with better understanding of Idoc adapter
read http://help.sap.com/saphelp_nw70/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm.
for troubleshooting refer http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm -
Idoc to file scenario general query
Hi All,
I know about the basic settings needed for the Idoc to file scenario.
My query is related the idoc /ALE settings.
I have a scenatio wrking in my system where we have configured the port for B type partner and also the port as XML-HTTP
I can not see any DM(BD64) created for it basically.I want to know that in what scenarios the BD64 configuration is required.
Or it is the case that if we define the BD64 then we do not need to configure we20 and we21, it will be auto configured?
Please let me know the use cases for these different configurations if any.
Thanks in advance.
Regards,
Rahul KulkarniHi Rahul,
BD64 uses mostly IDoc to IDoc scenarios because the IDoc consults the distribution model and determines whether any filter objects are specified for a receiver.
WE20 and WE21 (Partner Profile,Port Definition) we have to define in any scenarios where ECC included.
Thanks,
Seshu. -
IDOC to File Scenario - Configuration steps need to be done in R3 and XI
Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
SreeHi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas -
Setup for IDoc-XI-File scenario
Hi All,
Please provide info where can I find, step by step documentation for the basic setup on R/3 and XI areas, before start developing IDoc-XI-File or File-XI-IDoc scenarios.
Thank you,
SreeHi,
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File -> IDOC ->
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
(It concentrates on XSLT mapping but also gives an idea about the configuration part. Do go thru that, it might help you.)
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope I have answered your query.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS. -
No message in found in XI in IDOC to FILE scenario
Hi everybody,
I am working on a scenario idoc to file. The idoc is sent sucessfully from R/3 , but I am not getting any message in message monitoring in XI.Can anybody help me on this?Hi Bhagyashree,
Just see if the file is generated at the specified destination....
Meanwhile please go through the info below and cross check with what you have done...
i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this answers your query.
Regards,
Abhy -
Idoc to file scenario( I dont want acknowledgements )
Hi all,
where i can disble the acknowledgements in idoc to file scenario.
KiranHi,
If you want the ack..
Go throughthis steps..
go to transaction SXMB_ADM on XI SAP system
Choose Integration Engine Configuration
Select "Execute"
Choose "Specific Configuration"
choose New Entries
Select :
Category : RUNTIME
Parameters : ACK_SYSTEM_FAILURE
Current Value : 1
and save it.
The below link contains everything about IDOC acknowledgments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Might help you..
Regards,
vasanth -
IDOC to FILE scenario With Screen shots
CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots and do the needful for me
Hi Surya,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this helps.
Regards,
Abhy Thomas -
Idoc-xi-file scenario. how to display file in html format
I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
KumarHi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar -
In idoc to file scenario, if XI system is down where do idocs pile up?
In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS -
FIle Content Conversion Problem in IDOC-XI-File Scenario
Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
PrabhatIf u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy -
Error/Doubts in Idoc-XI-File scenario
Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.JainHi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .
Maybe you are looking for
-
Help with Organizer (Ver 11) after hard drive failure
I have Elements 11 and am an experienced user. Problem is with the Organizer program. Hard drive (Network attached drive) with 16,000+ images failed. Actual Organizer catalog is stored on my regular computer C:\ drive. ONLY the photos were stored
-
can some one help me in converting this php code to plsql procedure to handle response code from authorize.net' gateway's response so that i can call it like http://mysite.com/!my_proc < ?php // Get the subscription ID if it is available. // Otherwis
-
None of your website links work, why?
I have been trying to download the CVIRTE70.zip from your site for 2 days now and the links are dead. Yesterday I contacteed Joe Laxton over the phone and he said that he would send me the file in my e-mail yesterday, but i never heeard anything back
-
Tools is not working. Clear Private History is not working.
This is a new problem on 4 but I remember it being a problem on one of the old Firefox. I can't clear my recent history. In fact when I go back to Firefox a window appears saying restore recent session.
-
Admin account starts up but is frozen instantly. No classic solution works
Hi all, I have a rather old MacBook Pro 17 inch from 2008 which has been working superbly up to a few days ago. I am running Maverick 10.9.3 (I updated straight from Snow Leopard about 6 months ago) and that worked peachy, but three days ago, suddenl