About Importing IDOC.

Hi Guy's,
When we are Importing IDOC from SAP side after adding a extra field to IDOC, Its not visible at XI side aftr Import. How we wil find that Field ?

Hi kumar chaluvadi
if you want to add more fields in your idoc then you have to go for the idoc enhancement.
steps for the iodc enhancement
1. create the segment using the transactionwe31
2. create the enhanced idoc type using the transaction we30
3. link the msg type and the idoc type using the transaction we82.
if you still need clarification please reply me back.
Thanks
Rinku

Similar Messages

Unable to import IDOC metadata from 4.6C based R/3 system

As part of a project we are trying to import IDOC interface definition into XI3.0 from our 4.6C based R/3 System. I have gone through the pre-requisites mentioned at
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
One of the OSS notes 672745 in the above pre-requisites talks about applying basis component patch SAPKB46C46. Our current R/3 System is on the basis patch SAPKB46C39. Is there a way to import just the required function modules without applying the whole patch so that we can
continue with the projet ?
cheers.
Ramesh Babu

There is no SM59 RFC destination involved.
Go to SM59 of the XI box and check, the R/3 system for which XI is having RFC destinations.
And before importing, hope you have given R/3 system IP address, client , user id and Password correctly in the Software componenet version.
Is there a workaround for this?. I remember reading in this forum, that there are other ways of importing IDOC message and interface objects as XSD files directly instead of using import wizard.
>> For this you need to download the Idoc Schema from the R/3 system and then import this schema in the External Definition as a xsd type.
But you need to connect to R/3 system and import the Idoc, Because in the directory, you are going to use Idoc itself as an Message Interface. So the xsd used for changing the occurence of the Idoc type, so that you can post mulitiple idocs.
Hope this helps,
Regards,
Moorthy

Importing IDOCs

We have an IDOC to XI to File scenario.
The home grown PO IDOC has been used in two different interfaces. Interface 1 in SWC1 and Interface 2 in SWC2.
Now, if I want to Import my IDOC into the Repository in which SWC should I need to import. I know its not a good idea to import IDOC into SWC1 or in SWC2.
Probably I need to import this IDOC in a Central place in the Repository and then whereever I am using I need to refer that.
Please advise thanks.

Rohini,
The is something called dependency while defining SWC and SWCV in SLD.
When u have dependency between 2 SWC, u can use the objects in these SWCV.
I am not pretty sure about this, please check this option also. And let us know if it worked.
-Naveeen.

Could not log on to SAP R/3 from XI system to import IDOC/RFC objects

Could not log on to SAP R/3 systems from XI system to import IDOC/RFC objects:
As soon I enter the SAP IP address, system number, user id and passowrd , getting following error.
Details
java.lang.ArrayIndexOutOfBoundsException
STACKTRACE:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: java.lang.ArrayIndexOutOfBoundsException
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:79)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:320)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
java.lang.ArrayIndexOutOfBoundsException
Can anyone help me to solve this issue.

Venkat,
You can download them from http://service.sap.com/download
For 4.6c follow
Download
 Support Packages and Patches
 Entry by Application Group
Select Support Packages and Patches -> SAP Application Components -> SAP R/3 -> SAP R/3 4.6C -> Entry by Component
Mainly You need SAP ABA 4.6C and SAP BASIS 4.6C and SAP APPL 4.6C
The most latest one is Support Package 50. What you can do is after applying half of them you can try to logon from XI system for import of RFC/IDoc.
regards
SKM

Unable to Import Idoc from R/3 System.

Hi,
I am facing an error while importing Idoc (SERDAT.SEERDAT01) from 4.6c R/3 system, the errror is "unable to read the segments" and the same Idoc I am able to import successfully from ECC6 system. Please let the solution for the same.
Thanks & Regards,
Pragathi.

check if you have the proper authorizations
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value

Unable to import IDoc into NWBPM from NWDS

Dear PO Experts,
We are migrating an existing interface
(IDoc<-->PI<-->SOAP using BPM (Multiple sync calls)).
We are un able to import IDoc into NW BPM project as a service Interface. (For BPM we exported IDoc into local system as an external definition and did few modifications to the xsd as per below blog and exported back to PO server as an external definition.Create Service Interface for the same .
http://scn.sap.com/community/process-orchestration/blog/2014/09/24/idoc-to-nw-bpm-scenario#comment-542653 )
We are getting below exception while importing IDoc Service Interface into BPM project.I have attached IDoc WSDL file for your reference.Could you please share your expertise on this issue.
>>>An internal error occurred during: "Importing MOIN models for XSDs and WSDLs...".
java.lang.OutOfMemoryError: Java heap space
at java.util.ArrayList.<init>(ArrayList.java:112)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1271)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1050)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1149)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1039)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1272)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1060)
at org.eclipse.xsd.impl.XSDParticleImpl.getDFA
(XSDParticleImpl.java:2041)
at org.eclipse.xsd.impl.XSDModelGroupImpl.validateRoot
(XSDModelGroupImpl.java:599)
at org.eclipse.xsd.impl.XSDComplexTypeDefinitionImpl.validate
(XSDComplexTypeDefinitionImpl.java:1408)
at org.eclipse.xsd.impl.XSDConcreteComponentImpl.validate
(XSDConcreteComponentImpl.java:565)
at org.eclipse.xsd.impl.XSDSchemaImpl.validate(XSDSchemaImpl.java:1653)
at com.sap.tc.esmp.tools.core.util.EMFUtils.validate(EMFUtils.java:613)
at
com.sap.tc.esmp.tools.xsd.xml.EmfSchemaImporter.calculateAffectedPartitions(EmfSchemaImporter.java:903)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.calculateAffectedPartitions(Wsdl1Importer.java:365)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.resolveImportLink(Wsdl1Importer.java:545)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.createChainLink(Wsdl1Importer.java:522)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.init
(Wsdl1Importer.java:461)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.<init>
(Wsdl1Importer.java:337)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer.prepareWsdlImport
(Wsdl1Importer.java:1381)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer.prepareWsdlImport
(Wsdl1Importer.java:1368)
at com.sap.tc.esmp.tools.facade.Import.prepareWsdlImport
(Import.java:106)
at
com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor.doImportFiles(RepositoryMetadataProcessor.java:298)
at
com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor.access$300(RepositoryMetadataProcessor.java:52)
at com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor$4.run
(RepositoryMetadataProcessor.java:248)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Regards
Venkat

Hi Venkat,
Find the below link.
http://scn.sap.com/community/process-orchestration/blog/2014/11/29/using-idocs-in-nwbpm

Doubt while importing idoc (file 2 idoc scenario)

hi,
In IR, Imported objects..>Idocs
while importing idoc there are two options to import
according to software componet version,
Overwrite sever info temporarily
which one i have to use ? what circumstances i have to each option?

Praba,
Also please check this SAP help for the difference between these two:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
Regards,
---Satish

I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastav

Hi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish

Importing IDOC in XI for interface mapping

Dear All ,
In IDOC-XI-XML file scenarion , I am doing the interface mapping where I am giving the source(IDOC) and target(Data type ) . The problem I am facing is that I am not able to see any IDOC in the source . Can anybody plz explain how to import IDOC from the SAP sytem .
Plz need your help asap .
Thanks in advance .
Prabhat

Hi Moorthy,
I checked connection in SM59 all r working fine using test connection.
In XI I have created 2 different RFC's for R/3.
1) "D11" with my personal login ID of R/3
2) "D11-060" with some special login ID "XIRFCUSER" of R/3
In IDX1 if i am using D11 and when i am trying to import Idoc in IDX2 i am getting error "Communication error: 'User ROHILLAU has no RFC authorization for functio'"
But when i use D11-060 in IDX1 i am able to import Idoc in IDX2.
But in IR-> Import SAP Object, I am using my ID for import and getting error "JCO.Client not connected in repository call"
Is in IR i also need to use "XIRFCUSER".
Thanks & Regards

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

Question about import database pk, fk

Hi
I want to ask a question about imported database. I imported database and I noticed tables doesnt have Primary key or foreign key. They havent relation between eachs. Why can this occured ?
is it about import or another something?

yeah ı am surprised none of tables have pk or fk ..
but ı want to show you http://i51.tinypic.com/2hedc9d.jpg
what is blue shapes in there ?
can be foerign keys ?

Confused about importing images

I'm new to DreamWeaver but I've used GoLive for many years and still do. In GoLive if I want to import a folder of images so as to have them to work with in my site I just select Import, navigate to the folder and click it and the folder of images is copied to the site and appears in the GoLive window.
There is no way to do this in DreamWeaver that I can see. There is nothing I can find in the Help files or in the Missing Manual about importing images except one confusing entry in the Missing Manual. It says an image can be anywhere on your hard drive, but a couple paragraphs later it says images should be in the root folder of the site. I don't see any way to get them into the root folder other than doing so in the Finder which the documentation cautions against because DreamWeaver will become confused if this is done outside of DreamWeaver's Files window.
This has been absolutely maddening for me and I've spent at least an hour trying to figure out how to simply import images. It shouldn't be this difficult? What am I missing?

Russ.G wrote:
I believe my original question clearly stated that I wanted to import a _folder_ of images into DW and _not_ bring them in _one at a time_ as I use them. This qestion remains unanswered.
No, you cannot IMPORT the images per se, there is no import function available.
Nadia, first you say to bring files into DW via the Files window and caution against doing it another way. Then in your next reply you say you don't use the Files window and so in fact bring the images in another way via Windows Explorer.
I appreciate you trying to be helpful, but I can't imagine being presented with more contradictory and confusing information.
Can anybody tell me how to import a folder of images into DW?
What I was trying to explain was that there are different ways to 'bring in' the images into the defined Dreamweaver site.
1. Copy them from anywhere on your hard-drive into a specific images folder within the defined site.
2. Work with an image that may be saved elsewhere, but save it to a folder within the defined site.
As for the confusion. regarding working with files, you need to understand why you need to define a site in Dreamweaver first. DW keeps track of all the links as you build a site, but the files - whether html, text or image files - need to be inside the defined site folder structure. How you get them in there is completely up to you. More than one way to skin a cat as they say.
Define a site:
http://kb2.adobe.com/cps/140/tn_14028.html
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html

How to import IDOC to XI

How Can i import IDOC to XI...
Are there any predefined IDOCs ....
How can create my own IDOCs....
i heard that there is not need ot IDOC Adapter at sender side like the scenario is IDOC to file... How? XI will directly get that particular IDOC
How to define the structure of IDOC in datatype..
It Would be helpful in creating IDOC to file scenario, if u help me..
Thanks & Regards

Hi,
Doule click on your Software Component in the Repository.
See if option Allow import of RFC and Idoc is enabled. If not sleect it and activate your software component.
Next, go to the option --> Imported Objects --> Right Click --> Give the system details from which IDoc is to be imported and then improt the idoc b y selecitng the idoc you want to be imported.
>Are there any predefined IDOCs ....
yes, there are custom idocs available in every R3 system.
>
How? XI will directly get that particular IDOC
The R3 system used a TRFC to post the Idoc to XI. It hits the integration engine of Xi directly and so no need for a sender idoc adapter.
>How to define the structure of IDOC in datatype..
Idoc itselct acts as the message type and message interface. No need for a datatype. Just use the imported idoc as a message type and message interface,
Regards,
Bhavesh

Error while Importing Idoc with Extension

Hi All,
I already imported idoc with extension and working fine. When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
The objects as displayed in the navigation tree are possibly not up-to-date.
So I tried to Re import the Idoc in IR but it is ending with below error
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The objects as displayed in the navigation tree are possibly not up-to-date.
I already saw some threads in SDN for this error but I am not getting solution.
Can anyone provide a solution ASAP for the above error .
Regards,
Prakash

> When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
Why are you transporting it form Dev? Why not from QA to Prd.
Since this is a Z-IDOC so check if the extension has been released from R3 after doing any modification.
Regards,
Sarvesh

Problem importing idoc to XI integration repository

I have deleoped a custom IDOC and released in SAP/R3. Next I have imported it to XI using transaction IDX2 without problems.
However, when I try to import the metadata to the integration repository, I can't find it in the list of available IDOcs. I have tried to refresh the catches, and even restartet the XI server, but i doesn't help.
Any suggestions ?

Hi Henrik,
See if these threads help :
importing IDOC in XI for interface mapping
IDOC in IDX2 is not visible in while importing into XI Design Component.
Settings in XI side to receive IDOC from application server
Check this link to know minimum authorizations required for a user to import RFC/Idocs.
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm

About Importing IDOC.

Similar Messages

Maybe you are looking for