About inserting new rows in database table

Hi to all,
I recently installed SAP 4.7 on my system.Everything is going on smoothly .
But, I created a table "zemp" and created columns for it .And i tried to enter data into the table by
se16(data browser) ---> create entries (F5)
But system is displaying error message
"The System settings do not allow any changes "
and its not accepting any data .What i have to do .
Please help me in this regard .
thanks in advance.

You need to create the table maintenance generator for the table
Please check the following links
Re: Table maintenance generator
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Re: Regarding Table Mainantance Generator
Re: table maintenance
For further help look into these links
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21eb6e446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
Table
Message was edited by: Dominic Pappaly

Similar Messages

Inserting new records into database table at runtime

Hi all ,
How to insert new records into database table at runtime on click update?
Thanks.

Hi Sasikala,
Just for your understanding am giving a sample code snippet which you can use to read the contents of your Table UI element & save the data on to your database. Suppose you have a button up on pressing which you want to read the data from your screens table & save on to the database then you can proceed as shown below:
1) Obtain the reference of your context node.
2) Fetch all the data present in your table into an internal table using methods of if_wd_context_node
3) Use your normal ABAP logic to update the database table with the data from your internal table
In my example I have a node by name SFLIGHT_NODE and under this I have the desired attributes from SFLIGHT. Am displaying these in an editable table & the user would press up on a push button after making the necessary changes to the tables data. I would then need to obtain the tables information & save on to the database.
data: node_sflight           type ref to if_wd_context_node,
        elem_sflight           type ref to if_wd_context_element,
        lt_elements            type WDR_CONTEXT_ELEMENT_SET,
       stru_sflight           type if_main=>element_sflight_node,
       it_flights             type if_main=>elements_sflight_node.
"   navigate from <CONTEXT> to <SFLIGHT_NODE> via lead selection
    node_sflight_node = wd_context->get_child_node( name = 'SFLIGHT_NODE' ).
   lt_elements = node_sflight->get_elements( ).
"   Get all the rows from the table for saving on to the database
    loop at lt_elements into elem_sflight.
      elem_sflight->get_static_attributes( importing static_attributes = stru_sflight ).
      append stru_sflight to it_flights.
    endloop.
" Finally save the entries on to the database
    modify ZSFLIGHT99 from table it_flights.
    if sy-subrc eq 0.
endif.
However a word of caution here.... SAP doesn't ever recommend directly modifying the database through an SQL query. You would preferably make use of a BAPI for the same. Try go through Thomas Jung's comments in [here|modify the data base table which is comming dynamiclly;.
Regards,
Uday

I can't insert new row in database when there is a secondary key.

hi experts. I am using Jdeveloper since a while. I would like to know If there is a way to insert a new row with secondary key attribute in database. As example if we have a sessionEJBLocal data control can't we add new row by using single selection choice item for secondary key attributes? I tried to use single selection even jdbc with sql queries in a managed bean but nothing. Can you help me please?

would this solve your problem
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html

Insert new row in Data Table

Hi All,
Based on "Insert, Update and Delete" tutorial it's easy to perform insert by addidng new row in forms.
Then I tried to do the myRowSet.moveToInsertRow() having a the RowSet bound to a Data Table and no new record appears :( !
Any workaround ?

My guess is that you are not refreshing the datatable - you must call execute on the datatable model object again.
Unless you are expecting a new "inserted" empty row to be created on the datatable itself when you call moveToInsertRow - the JSF standard datatable doesn't support that operation. See the AppModel sample application to see another option to handle that scenario.
v

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

Insert new row in a table (in a program)

Hi,
It's possible to add a row to a table in an ABAP program ?
Like an ALTER TABLE or what ? or the user must go to SE11 ?
Thanks !

Hi
I don't know your issue, but it doesn't seem to be a good idea to do it, you risk to have misalignments between development, quality and production system.
A table should be created by a developer only, not a user
Why the user doesn't have to use SE11?
Max

Inserting multiple rows into database table

hi
I have a simple jsp/html page like this:
<h1>Enter Comments</h1>
   <select name = "g1">
        <option>10</option>
        <option>20</option>
        <option>30</option>
        <option>40</option>
        <option>50</option>
        <option>60</option>
        <option>70</option>
        <option>80</option>
        <option>90</option>
        <option>100</option>
    </select> <input name = "comment1" type = "text" size = "60"><p>
     <select name = "g1">
        <option>10</option>
        <option>20</option>
        <option>30</option>
        <option>40</option>
        <option>50</option>
        <option>60</option>
        <option>70</option>
        <option>80</option>
        <option>90</option>
        <option>100</option>
    </select> <input name = "comment1" type = "text" size = "60"><p>but when i say : String fruit=request.getParameter("g1");
String fruit=request.getParameter("comment1");
only one gets written into the table. How would I write them both into seperate rows of the table? e.g.
g1 comment1
g1 comment1
thank you all,

change the name of the second select and second text element.
You're only getting one because they're named the same, so the second one is overwriting the values of the first.
HTH.

Insert new row in af:table

Hi all,
I have on a page
<af:table … id="t1">
</af:table>
and <af:commandButton actionListener="#{bindings.Create.execute}"
text="Create" disabled="#{!bindings.Create.enabled}"
id="cb2" partialTriggers="t1"/>
where Create is a method of above table iterator.
The problem is that new record does not appear after button click. It appear only after another click or click of any another button. What should I do to see new record immediately after clicking Create?
Thanks,
SNikiforov
My JDeveloper version is 11.1.1.2.0

Use CreateInsert instead of Create

Data pump + inserting new values in a table

Hello Everybody!!
My question is : is it possible to insert new row into a table which is included in running DataPump process (export data) ?
Best regards
Marcin Migdal

Have a look here, never done it myself but seems kind of cool :)
http://www.pythian.com/blogs/766/oracle-data-pump-11g-little-known-new-feature

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Insert new row in table

hi,
im using aqualogic dsp2.5 . i have a requirement wher ei have to insert a new row in the table through data services. i tried the method executeUpdate() but i got an error saying this function is not supported. is there any method to insert a new row in a table through data services.
thank you in advance,
rahav.

http://e-docs.bea.com/aldsp/docs21/appdev/ejbclt.html#wp1083367
queryPlansDataServices.customer.CUSTOMERDocument customerDocument= queryPlansDataServices.customer.CUSTOMERDocument.Factory.newInstance();
queryPlansDataServices.customer.CUSTOMERDocument.CUSTOMER customer=customerDocument.addNewCUSTOMER();
customer.setLASTNAME("KAY_99");
customer.setFIRSTNAME("JOHN_99");
customer.setCUSTOMERID("CUSTOMER_99");
customer.setCITY("SAN JOSE");
customer.setCUSTOMERSINCE(Calendar.getInstance());
customer.setEMAILADDRESS("[email protected]");
customer.setTELEPHONENUMBER(new BigInteger("4085708612"));
customer.setZIPCODE(new BigInteger("95131"));
customer.setSTATE("CA");
customer.setSTREETADDRESS1("2413 N First St");
customerDs.submit( customerDocument );

Adding a new row to database and then modify it

Hi there,
Im pretty sure this is a simple matter but i am new to JDBC,
i have an application where i create a new member in a database and then want to modify part of that members info (weather he pays for something monthly or annually)
I can add the new member easily, and I create a unique ID and place him in the db.unigue ID assigned by Access db.
Then i want to bring the same member back and alter his data, since I am inserting new data there is no resultsSet returned (am i right about this?)
so how can I get the same member back and alter his data, or at least find out what his ID was so i can do a query for the same ID?
cheers
D

because you talk about creating new row then I assume you know how to invoke the executeUpdate() method. You can change the field in your table with the UPDATE command. The sintaxt of UPDATE following your database system sintaxt. If you want to query the data in the table you can use the method excuteQuery(). i.e. executeQuery("SELECT * from tableName").

Create a new row in a table without using add new row button

I want to add a new row to the table without using the add new row button of the table. I'm not able to display default row in the table. Though if click on apply the record appears after saving in the database. Any thoughts how to implement this functionality.

Here is what you have to do.
1) You have to handle this in processRequest()
2) In the AM code , u need to check if there is already a row exisit or vo is blank
if (vo.getFetchedRowCount() == 0)
// first time
vo.setMaxFetchSize(0); // THIS IS REQUIRED.
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
else
//If already rows are there then you suppose to insert in the end
// i assume you would have execute your vo
YourVORowImpl row= (YourVORowImpl)vo.getRowAtRangeIndex(0);
vo2.insertRowAtRangeIndex();
It should work.

Can't insert new row in last position in row set

I am trying to programmatically insert a new row into the last slot of a View Object's default row set.
I normally can do this:
Row newRow = vo.createRow();
// set stuff on the row
vo.last();
vo.next();
vo.insert(newRow);and, voila, the row is in the last position.
But on this particualr view object, when I do the above, the row is inserted in the first slot.
There doesn't seem to be anything unusual about the View object. it is a child Vo in the data model, but that shouldn't matter.
When I debug with vo.getCurrentRowSlot(), even after performing last(); next();, vo.getCurrentRowSlot() returns 0, never 3.
Has anyone else run into this behavior and if so, any resolution or explanation?
FYI, I was able to use the following workaround:
Row lastRow = vo.last();
if (lastRow != null){
    int indx = vo.getRangeIndexOf(lastRow) + 1;
    vo.insertRowAtRangeIndex(indx, newRow);
} else {
   vo.insertRow(newRow);
}

would this solve your problem
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html

OBIEE Write Back - Insert New Row

Hello,
I am new to these forums and looking for some help with OBIEE's Write Back feature.
I have Write Back working fine with respect to updating existing rows in a table (ie: the UPDATE tag), but was wondering how to force Write back to invoke the INSERT feature. I would like to be able to create new rows in a table to allow my end user to dynamically add and remove information. I have heard of this being possible (perhaps through some sort of temp. table) in other forum posts, but have yet to see how this is implemented. Also, is it at all possible to use Write Back to delete rows in a table? Any help here would be greatly appreciated. Thanks!
-Mike
Here is an exerpt from my working XML file:
<WebMessage name="NEWSNOTESADMIN">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert>INSERT INTO WC_NEWS_NOTES (CONTENTS, CONTENT_DATE, IMPORTANCE_LVL) VALUES(@{c0},@c{4},@{c2})</insert>
<update>UPDATE WC_NEWS_NOTES SET CONTENTS='@{c0}', CONTENT_DATE='@{c4}', IMPORTANCE_LVL=@{c2} WHERE CONTENT_ID='@{c1}' </update>
</writeBack>
</XML>
</WebMessage>

Well first and foremost, Oracle explicitly states that writeback isn't meant to be used to transform OBIEE into a data entry system. Check the other posts on this subject...
On the "force insert": put the same statement you have for INSERT into the UPDATE tag. Related to the initial point I mentioned: you will have to worry about uniqueness yourself. OBIEE isn't an OLTP platform!
Re. delete: I liked Stijns recent post, so I'm going to use that as well:
http://www.justfuckinggoogleit.com/search.pl?query=obiee+delete+through+writeback
Third hit. Venkats blog.

About inserting new rows in database table

Similar Messages

Maybe you are looking for