About Install Oracle Access Manager On Windows Server 2008 64bit

hi,
Question 1:
Can I install OAM10g(10.1.4.3.0) on Windows Server 2008 64bit ?
(because OAM10g all is for win32)
(I have tried to install it , but when OHS restart, have errors, so I found the 64bitOS is the trouble...)
Question 2:
If Question1 cannot, Can Oracle Identity and Access Management 11g fix it ?
Help
Thanks.

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

Similar Messages

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Cant install Oracle 9i x64 on Windows server 2003 64bit

Hi,
im new here and i got a problem
i cant install Oracle 9i x64 on Windows server 2003 64bit
i get error:
Setup.exe ist valid, but is for a machine type other than the current machine
can someone help?

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

Installing Oracle XE 10g on Window server 2008

Hello,
I want to ask if i can install Oracle XE on windows server 2008, if not what releases of Oracle DB can be installed on Win2008 server
Regards,
Tareq

Thank you for your quick answer,
But i want to know are there any steps to install this release or just go through normal steps.
Oracle Database 10g Release 2 (10.2.0.1)
Express Edition for Microsoft Windows
Also i want to install IDS10g R2 ... Can i install it also on the server, if not can i install the OC4J stand alone ??
Thank you.

Oracle 11g Client for Windows Server 2008 Relase2 Operating Stystem

Hi,
I am having a server with Operating System as Windows Server 2008 R2 version 64 - bit.
I am using SSRS 2008 which is 64 bit, for retreiving the data from Oracle (which is 11g - 32 bit), I am unable to create data source for Oracle.
I had installed ODAC Components of Oracle 11.1.0.7.20 on the server, but still I am getting the following error:
"The 'OraOLEDB.Oracle.1' provider is not registered on the local machine."
Does any one know how to install Oracle Client 11g on Windows Server 2008 R2 Operating system?

Helios,
It is wonderful that you are polite and encouraging to new people.
While you are responding, could you explicitly direct people to use the correct forum. This has at least 2 benefits:
1) Ensures that the person gets the widest possible amount of assistance;
2) Ensures that the rest of us do not need to waste time on improperly placed questions.
I suggest 'explicitly' since some people do not get the hint, and keep returning to the original thread.
This thread belongs in 'Database - General' or 'Database - Install'.

Installing Oracle Access Manager - 11.1.1.5

Hi
I am very new to Identity Management and have been trying to set Oracle Access Manager in Windows XP.
Downloaded ofm_iam_generic_11.1.1.5.0_disk1_1.zip from OTN.
I cannot find the RCU for 11.1.1.5 version from the website directly. All I could see is only RCU for 11.1.1.3 and 11.1.1.2 version.
Can anyone send me the download link for RCU 11.1.1.5 and step by step installation guide for setting up Oracle Access Manager.
I tried creating OAM Domain after installing IDM Suite and running RCU 11.1.1.3 version.
When I run the WebLogic and OAM server I am getting error
Caused By: oracle.security.am.common.policy.admin.PolicyManagerException: oracle.security.am.c
policy.admin.PolicyManagerException: OAMSSA-06251: Unsupported policy store version detected.
ed "11.1.1.5.0" but found "11.1.1.3.0".
Also unable to login to OAM console.
Thanks,
Ram

Daren,
Do you have OAM 11.1.1.3 running and now you wish to upgrade it to 11.1.1.5 or
You wish to install new 11.1.1.5 ?
If this is later then better you should use 11.1.1.5 RCU to create schema as this is straight and easy process with no upgrade.
If you are running 11.1.1.3 and wish to upgrade to 11.1.1.5 then there are steps to apply 11.1.1.5 oatch in My Oracle Support(earlier metalink) Procedure to Upgrade OAM 11.1.1.3.0 to OAM 11.1.1.5.0 [ID 1318524.1
Atul Kumar
http://www.amazon.co.uk/Oracle-Identity-Access-Manager-Administrators/dp/1849682682 <- OIM / OAM 11g Book on Amazon
http://onlineappsdba.com/index.php/book/ <- EBS R12 Integration with OID/OAM for SSO Book

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

Dear
Exparts, Hope you are fine.
Application Server: Standalone 10.1.2.3
OS: Windows Server 2008 64bit
Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
But i need to install. Have any one has successfull experiances to do so ?
Please share and guide.
Waiting for your valuable responses.
ask2learn

Dear Marcus,
Thanks for your reply.
I tried Application Server Stand Alone and success.
So, i closed the thread.

Installing Forms 11g 64bit on Windows Server 2008 64bit

Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
Mark

FYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark

Install CF8.01 on Windows Server 2008 64bits

Hello,
I have a new machine whith Windows server 2008 x64 and i
installed on it CF8.01.
For installing, no problems and the service work fine.
But, when i launch one page on the web server, a .cfm or a
classic html the IIS 7 return a error 500.21 :
HTTP Error 500.21 - Internal Server Error
Handler "AboMapperCustom-26364" has a bad module
"IsapiModule" in its module list Detailed Error InformationModule
IIS Web Core
Notification ExecuteRequestHandler
Handler AboMapperCustom-26364
Error Code 0x8007000d
Requested URL
http://127.0.0.1:80/
Physical Path C:\inetpub\wwwroot
Logon Method Anonymous
Logon User Anonymous
In IIS config panel, handlers mapping, i have entry for all
CF handler and one with path * and direct from
jrun_iis6_wildcard.dll.
the section of web config for handlers is :
<handlers accessPolicy="Read, Script,Execute">
<clear />
<add name="AboMapperCustom-23790" path="*" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\1\jrun_iis6_wildcard.dll"
requireAccess="None" responseBufferLimit="0" />
<add name="AboMapperCustom-23791" path="*.jsp" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23792" path="*.jws" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23793" path="*.cfm" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23794" path="*.cfml" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23795" path="*.cfc" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23796" path="*.cfr" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="AboMapperCustom-23797" path="*.cfswf" verb="*"
modules="IsapiModule"
scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
requireAccess="Script" responseBufferLimit="0" />
<add name="TRACEVerbHandler" path="*" verb="TRACE"
modules="ProtocolSupportModule" requireAccess="None" />
<add name="OPTIONSVerbHandler" path="*" verb="OPTIONS"
modules="ProtocolSupportModule" requireAccess="None" />
<add name="StaticFile" path="*" verb="*"
modules="StaticFileModule,DefaultDocumentModule"
resourceType="Either" requireAccess="Read" />
</handlers>
and
Application 32bits mode is ok
<applicationPoolDefaults enable32BitAppOnWin64="true">
<processModel identityType="NetworkService" />
</applicationPoolDefaults>
Have you an idea why the application server fail.
Thanks for your responses.
Seb

I'm pretty sure Adobe offers free installation support, try
contacting them:
http://www.adobe.com/support/contact/
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Fordwebs, LLC
http://www.fordwebs.com
"sebFrance" <[email protected]> wrote in
message news:g1el1t$e2l$[email protected]..
> Hello and thank you again,
> I configured Application Pools in 32bitsenabled.
>
> I had always error 500.21
>
> Then I uninstalled CF8 and reinstalled with 32bits
enabled in the application
> pools.
> I've always the same mistake.
>
> It is also important to know that when I webserver
config to remove the server
> I get an error:
>
> "Error deleting IIS application extensions. Jsp,. Jsw,.
Cfm,. Cfml,. Cfc,.
> Cf.,. Cfswf,. Mxml, from web site Any (0)"
>
> In addition, handlers configured in the web site
"AboMapperCustom-26764" with
> the isapi module for the "*" is the one that fails.
>
> East I forgot something:
>
> I recall the installation process complete server:
>
> Installing Windows Server 2008 64bits.
> ----
> Installing the Web server role with IIS7 :
> ----
> Common HHTP Features (All options)
> Health and diagnostics -> request monitor
> Security -> Request Filtering
> Performance -> Static content compression
> Managements tools (IIS Management Console + IIS6
Compatibility)
> ----
> Installing SQL server 2005 64bits
> ----
> Passage of the authorized application pools in 32-bit
applications
> ----
> Installing CF8 version 8.01 standard 32bits
> ----
> Modifying files as indicated ksmith.
> ----
> For each phase I restart the machine so that changes are
properly taken into
> account.
>
> Despite all this I have always error 500.21
>
> East I forgot some things, a service or a component that
I should download.
>
> But thank you for your valuable advice.
>
> S?bastien
>
>
>

Install Premiere pro cs4 on windows server 2008

Hi ,
How can i Install Premiere pro cs4 on windows server 2008?

I don't think you can... as far as I know, PPro is not designed to run on a server

Installing SUP 2.0 in Windows Server 2008

Hello Experts,
   I am going to install SUP 2.0 in windows server 2008. so please suggest me how to install it and which components must be install in Server and in Client machine.
How to connect client machine with the Server 2008 for Sybase.
I followed SUP Installation Guide. But can't get any proper information,
Please reply me.
Regards,
Tapan

Hi Tapan,
You have two options to install SUP 2.0.
1. Cluster installation
     a. Data tier node
     b. Server nodes
2. Single node installation
For Single node installation, all Data Tier and UnwiredPlatform components will be installed on single system. For this you need to launch the installer and proceed with default installation options (you can change ports, etc).
For Cluster installation, on one machine launch the installer and select cluster option and select "installation Data tier node for my cluster" and install it. After this share the Data folder (Under the install directory) to the user who is going to install Server nodes. For Server nodes, launch the installer on diffrent machine and select cluster option and select "installing first server node for my cluster" and enter needed information.
Hope this helps.
Regards,
Abhishek Joshi

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Crystal Report 2008 on Windows Server 2008 64bit

hi,
I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
"Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
"Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
The System:
- Windows Server 2008 Standard 64bit SP2
- Microsoft .NET Framework 3.5 SP1
- Oracle Client 10gR2 64bit
- I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
- Crystal Report Basic Runtime for Visual Studio 2008 (x64)
On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
Is it possible and what is to do to get it working, thanks,
Martin

It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
Ludek

About Install Oracle Access Manager On Windows Server 2008 64bit

Similar Messages

Maybe you are looking for