About Internal Memory

I just parched Nokia X2 dual sim smart phone.Apparently,in the specification section,the mass storage (internal memory )was specified as 4GB internal memory.However checking the " total storage " via setting interface the TOTAL SPACE Shows to be only 2.25GB, and the available space memory 1.90GB.please helps me how to calculate internal memory 4GB.

This has been brought up here multiple times,this is how all phones work,the memory is taken up by the OS and apps.All phones are like this its nothing new at all.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

N79 - Why so little internal memory

My perfect phone - will even forgive dual LED rather than Xenon - OTHER THAN 50Mb internal memory. Less than 90mb on N Series last seen I believe 18 months ago in the N77.
Why the backwards step - has memory become expensive all of a sudden?
Running 6220 Classic (not even N series) with 100Mb. Mail for Exchange consuming 49Mb -MfE must be installed to device memory -so there's no way I'll be able to upgrade and enjoy the benefit of a much improved build quality - 6220 is not good in this department.
Completely perplexed why a "smartphone" in Q4 2008 would be pushed out into the market in this condition.
Can't believe reduced cost and/or reduced size argument can be significant enough to justify Nokia's bizarre decision. I'm therefore inclined to believe that it's as much about slicing their N series customer base into distinct segments so as to maximise the sales in each segment. Nothing wrong with that as such but I'm personally not inclined to trade up to the N85 (do not want a slider) to tick the one box which in my opinion is missing. I reckon the loss of ex WinMo Exchange Server users will likely cancel out those who do decide to trade up.

Was informed by Nokia Online Sales that listed for France and Low Countries in November so assume UK will arrive about same time.

E52: Mail for Exchange complains about low memory

Hello,
we've just gotten two Nokia E52 phones for our company to use as mobile MS Exchange clients.
We've been using the E51 for the past two years without any major problems.
After just one day of use however, we've already run into memory problems with both E52s.
Mail for Exchange constantly complains that the internal memory is full and subsequently stops synchronizing with out Exchange 2010 server.
According to the File manager, there are indeed only about 2 MB of internal storage left.
Not that 60 MB internal storage are anything to write home about...but I didn't expect to run out of memory so quickly.
Both phones are also equipped with an internal 4 GB miniSDHC card. Is it possible to let MFE use the SDHC card as it's primary storage?
Is there anything else I could try?
Both phones are running the latest firmware 051.018.
Thanks in advance!

You need to make Exchange save the messages onto the memory card instead of the built-in memory. Go to HomeMenu:Messaging. Then select Optionsther:MemoryInUse and select MemoryCard. Now all of your messages will be stored on the memory card instead of built-in memory.

Internal Memory of the Work Process

Hi Gurus,
wat will be stored in the internal memory area that is available exclusively to the work process.
I know that the memory area that can be accessed by all the work process stores programs,table buffers,
user context and possible the roll file.
But here im asking about the memory area that is available exclusively to a workprocess.
Cheers,
Abdul Hakim

Resolved

Need information about Internal Tables

Hi Every one!
I Need some information about Internal tables. Pls help be above the same.
Thanks & with Regards,
Chandra.

Hi..,

Internal tables 
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Like all elements in the ABAP type concept, internal tables can exist both as data types and as data objects A data type is the abstract description of an internal table, either in a program or centrally in the ABAP Dictionary, that you use to create a concrete data object. The data type is also an attribute of an existing data object.
Internal Tables as Data Types
Internal tables and structures are the two structured data types in ABAP. The data type of an internal table is fully specified by its line type, key, and table type.
Line type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
If a table has a structured line type, its default key consists of all of its non-numerical columns that are not references or themselves internal tables. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty.
The user-defined key can contain any columns of the internal table that are not references or themselves internal tables. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.

Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.

Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be unique or not. Standard tables and sorted tables are known generically as index tables.

Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.

Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
Internal Tables as Dynamic Data Objects
Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.

Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.

Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.

Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
regards,
sai ramesh

Ovi Maps, Internal Memory / Memeory cards question

My new memory card arrives in a day or two and until it does I have not been downloading much on my phone but I have been using Ovi Maps.
When maps starts I get the little popup about not finding external memory so it uses the internal memory and I was wondering is there stuff left on the internal memory that can be deleted or copied to the external memory when I get it?

As it was expected I did my job with nokia map loader...http://europe.nokia.com/support/download-software/nokia-map-loader/download
And after that ovi suite opened without questions the maps.
If it is integrated in ovi suite as I read here: /t5/Maps-Navigation-and-GPS/Nokia-Map-Loader-support-dropped/td-p/700212
it doesn't work right. If it is a new map loader in ovi then nokia you have to go BACK.

N86: something's eating internal memory

Hello there,
I own this little good buddy called N86, and now that I have starting getting used to of it, space cruch is the new creepy thing, i have to deal with.
This has got 80MB of internal memory (C:, too low), and after 4 months of use, it says 58MB used by other files. I have been hitting my head all the way browsing internal memory and cannot find what those other files are? Cannot find it on my own, but should be able to, by anyone of your's grace!!! Got an idea... what can be done...to get rid of so called "other files"...?

/discussions/board/message?board.id=topfaq&thread.id=159
have a look at this
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Internal memory s6000

I am new to the tablets and just wondering why my tablet seems to be using up so much internal memory, I will check it before I shut it down and when I restart it the next day there is 10 to 20 mbs of internal memory used than the night before, is this normal or can this be adjusted in some way?

Are you talking about storage (Flash) or memory (RAM)?
If you're referring to RAM, Android pre-loads apps in the background... don't worry about it.
If you're referring to storage, 10-20MB isn't much, probably just apps or the system caching stuff.

Does importing use computer's internal memory?

I'm having an issue with Lightroom when I import pictures. When I import them into Lightroom from an SD card it is using my computers internal memory, is this supposed to happen? After I edit the pictures and export them as the new pictures, I remove them from Lightroom but any internal memory that was taken up by the importing process is not put back. Anyone have any suggestion on this?

Something else that you need to understand. When you import images into Lightroom, Lightroom doesn't engulf them and store them in some mysterious place that is in addition to where your images are located on your hard drive. The import process allows you to tell Lightroom where to put new images imported from a card. Then, when importing, the images are placed in that folder and Lightroom simply points to that folder. When you import images that are already on your computer, Lightroom just creates a pointer to where they are located. There is no additional copy made.
As you work on your images in Lightroom the adjustments are stored in the catalog. When you display an image in Lightroom that you have worked on previously Lightroom reads the catalog and applies the adjustments that you have made to that image. Consequently you see the "corrected" results. If you decide to remove images from the catalog then Lightroom forgets all about the image and any adjustments you have made. You are left with the original image, in its original state. And if you want a corrected copy again then you have to start all over.

How can I free up internal memory on my Droid Pro?

Hi, for the last few weeks i have received that lil triangle in the circle saying that i have run low on internal memory/storage. I have cleaned up my sd card and attempted to move apps to but they i can not do so. The few apps that I have left on my phones internal memory are smaller and my phone should be able to handle it. I am left to try and remove system programs which obviously i can not do. It is so bad that my phone is actually rejecting incoming text messages, most of the time i do not even get notified of this happening. It is driving me nutz. If i use my browser or any app i have to remember to clear my my cache or history so there is just a lil bit space to allow my messages to come in. If it feels like taking it. Does anyone know what or how I can get to the internal storage to clear more things out? I have hooked my phone up to the pc, did the verizon mobile stuff, just about everything my enough to be technical dangerous but not enough to do this for a living brain can think off? Help please. This is a Droid Pro. I love this phone and do not want to get rid of it. Thanks in advance for any and all suggestions.

Have you done a system cached clear??
(Steps may vary slightly but should be close)
Power down phone
Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
Use volume down to navigate to 'Recovery', use volume up to select
Should see screen with triangle and exclamation point next to an Android
Press volume up/down simultaneously to go into system recovery
Use volume rocker to navigate to 'wipe cache' and use power button to select
Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select.
Are you storing pictures or music on the phone? Move them to the SD card.

Briefly about internal tables

briefly about internal tables
standerd internal tables
hash internal tables
sorted internal tables
index internal tables

Hi,
Internal tables : Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs.
Types of internal tables :
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be UNIQUE or NON-UNIQUE. Standard tables and sorted tables are known generically as index tables.
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
Creating Internal Tables
You define internal tables first as an abstract data type in the program or ABAP Dictionary, and then as a data object based on that, or they are declared directly as a fully specified data object. When you create an internal table as a data object, you should ensure that only the administration entry which belongs to an internal table is declared statically. The size of table headers for initial tables is currently 8 bytes. This should be heeded whenever internal tables occur as components of complex data objects. Also, empty tables can use up a relatively high amount of storage space as components of tables. The size of the entire storage space required for an internal table is not defined in the declaration as is the case for data objects of the type string or xstring. Table rows are added to and deleted from the table dynamically at runtime by the various statements for adding and deleting records.
Structure of internal tables :
STRUCTURE OF INTERNAL TABLE
TYPES : BEGIN OF ITAB,
                PERNR TYPE PERSNO,
                WERKS TYPE WERKS,
               END OF ITAB.
INTERNAL TABLE DECLARATION FOR THE ABOVE STRUCTURE
DATA : INT_TAB TYPE STANDARD TABLE OF ITAB,
            WA_TAB TYPE ITAB.        "WORK AREA OF THE INTERNAL TABLE
Thanks,
Sakthi C
Rewards if useful *

S820 very low internal memory

S820 has 2.4gb of internal memory but about 1.8gb used by system. Meaning we only have abt 600mb of space to install downloaded apps. Very frustating. Can you free up more memory without having to root them? Can you tranaform the built in storage of 1.2gb to be internal memory? This is fruatating if you have to worried when trying to install new apps that ypur memory wpuld be insufficient. Lenovo, any solution to this?

unfortunately this is a great design flaw of this phone.Not much you can do except keeping apps to a minimum, or doing what's in here: https://www.youtube.com/watch?v=GN6lzO03pqI .....if you dare

X6 internal memory is gone

My Nokia X6 - 32Gb internal memory is totally gone. All my photos and music are erased or the memory card is somehow broken. What should I do? I've already tried to reboot it.

Take it to a Nokia care point for inspection and repairs. From reading quite a few posts about what looks like to be the same issue, noone has solved it. Looks to be a hardware problem.

Changing internal memory of nokia 6070

i m using 6070... nice phone but there is a memory problem.... the phone holds 16mb of total memory out of which it gives only 3.2mb user memory...... is there ne way to increase the memory. i know that it supports no memory cards but is it possible to change its internal memory-chip???

Uh, no. its not possible. Its like asking someone to install a disc drive into a plasma TV. Also, even if it was possible, it would entail buying a new board for the unit, which is about as expensive as buying a new phone.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

About Internal Memory

Similar Messages

Maybe you are looking for