About JCE export restrictions by the relevant law

Hey,everybody.
i am in China, Can i use Java Cryptography Extension (JCE)?
And the relevant law limit JCE usage in China?
Thanks

The only relevant laws are your country's import laws. The US lifted crypto export restrictions two presidents ago.

Similar Messages

HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please?

Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
Mandi

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
Kurt

The type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
     Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
     Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
     Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D

Is there any restriction on the length of all Primary keys in a table

Hi all,
Is there any restriction on the length of all Primary keys in a data base table?
i have some 10 fields as primary key in a DB table and length exceeds 120 and getting a warning.
Please let me know will there be any problems in future with respect to the same?
With regards,
Sumanth

Well actually there are constraints like
Total of internal lengths of all primary key columns        1024 Bytes
Number of primary key columns per table                     512
For other information about SAP database please refer to http://sapdb.org/sap_db_features.htm
Thanks & Regards,
Vivek Gaur
Alwayz in high spirits

Restrictions on the size of blog entry

When I publish a blog entry 200 words about it is appeared properly. But if I write a great article, I see only a blank space on the blog page. But on the front page of the blog in summary form, everything is fine. Does anyone know what is the problem.

James Christopher wrote:
is their any restrictions on the size of the internal Hard drive
mac book G4 12in.
You might take a look at your System Profiler description of the machine. Select "About this Mac" from the Apple menu, then click the "More Info" button (at least that's what is says in Tiger). Or you can just launch System Profiler from the Utilities folder.
In either event, you will open to a Hardware Overview like this (except yours will be for the laptop)
Hardware Overview:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,2
CPU Type:          PowerPC 970 (2.2)
Number Of CPUs:          2
CPU Speed:          2 GHz
L2 Cache (per CPU):          512 KB
Memory:          5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.1.4f0
(Note, if you post, do not post your machine's serial number, which will be in the display.)
That being said, my TiBook from 2003 now has a 160G Hitachi Travelstar in it, which was the largest IDE little drive I could get at the time. If your machine is in that time frame or newer, you can put in pretty much anything they make now. Of course, if it is truly a MacBook, then the SATA laptop drives are getting very big.
You can get some more information at this OWC link which will allow you to see how big an IDE drive you can put into a G5 PowerBook.

[CS3] [JS] Export PDF to the same folder as the InDesign file

Hi,
I have written a JavaScript to export an InDesign file to a PDF file.
The exporting works fine when exporting to a specific folder, but I want the script to export the PDF to the SAME folder as the InDesign file.
For example, if the Indesign file is in a folder called "Owner's Manuals", I want the script to save the PDF into the same "Owner's Manuals" folder.
At the moment I have:
var myFolder = Folder.selectDialog ('Choose a Folder');
but this dialog defaults to the Desktop every time, forcing me to click 6-7 times to locate the relevant folder where I want the PDF to be saved, which is a waste of time.
I want the script to do something like the following:
"Find out the location of this InDesign file, and export the PDF to the same folder"
I have searched this forum, as well as the Scripting Reference, but without any luck.
Any suggestions are greatly appreciated.
Thanks.

Hi
Please another another one time check it out..
//Do not open the PDF Export dialog box. Set "false" to "true" if you want the dialog box.
myDoc.exportFile(ExportFormat.pdfType, myFile, false, "Press Quality");
Instead I used
var ExPDFs= File(Final+myBaseName + ".pdf");
pdfPreset = app.pdfExportPresets.item("Sample");
myDoc.exportFile(ExportFormat.pdfType, ExPDFs, false, pdfPreset);
Here I think u made mistake in "pdfPreset " passing argument...
I used Sample -> PDF Preset name, but u passing PDF Preset is directly [Press Quality]... thats all.
Then how come u say this script is not working....like that?.
I used this script in my Projects U know?.
Please try to reveal and check throughly after that U say the word "Thanks for your suggestion, but it did not work."
OK.

Questions about PDF exporting with InDe CS5.5

Hey all,
A couple questions about exporting to PDF from the latest version of InDe.
First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Thanks as always.

First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Yes, this is abnormally long (and too long), something is wrong. What's the full version of InDesign you are running, as reported by holding down Cmd or Control and selecting About InDesign?
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
Saving is not related. InDesign makes a database snapshot of your document the moment you begin the PDF export, and makes the export relative to that snapshot, regardless of edits you continue to make during the export process, and regardless of saving. Of course saving first is a good idea, for several reasons, not the least of which it sounds like something's fairly seriously wrong with your document or your InDesign installation.
We recommend you trash your preferences and export your document to IDML and see if either of those things changes this 8-minute behavior...err, assuming you're running 7.5.2.318.
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Yeah, I think the primary benefit is if you are likely to work on 2 or more files in parallel, so you can finish A and export A and then switch to B. If you'd like a dialog box to pop up when export is done, check out my exportPop script from this post: ANN: automatic dialog after background export (exportPop.jsx.

'in the relevant service terms' when moving home

I have been a BT landline user with 12 month contract.
I am planning to move house but possibly have to leave UK near future.
In the contract you say;
*When you order services from BT there will be normally be a minimum contract period of 12, 18 or 24 months. If you decide to stop receiving a service within this minimum period you'll have to pay an early termination charge.
**If you move home within the UK, and let us know at least seven days before you do so we will continue to provide your communications service at your new address in line with our home mover page and the terms set out in the relevant service terms.
I am not fully clear about the word 'relevant'
My contract has been updated on Feb each year.
If i move on Sep, is the next updation on Feb 2011 or on Sep 2011?

Hi Masa,
Thank you for posting and welcome to the forum. If you move in September this will be the start of your new 12 month term. This means that if you move in September 2010 you contract will end September 2011. I hope this answers your question.
Thanks
Paddy
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I'm among about 140 people who received the same email. I want to include all of those addresses in a new group. Is it possible to create the group without having to manually enter each of the 140 addresses?

I'm among about 140 people who received the same email. How can I create a new group for these people without manually entering all 140 addresses?

Hi SDGNOM,
According to your description, my understanding is that you want to export list to Excel with all columns in your SharePoint.
For the SharePoint RPC protocol method, SharePoint export to excel will take the list id as well as the view id. So we cannot export list to Excel with all the columns without having to depend on the fields
chosen in the default view.
Reference:http://msdn.microsoft.com/en-us/library/ms478653.aspx
For a workaround, you can achieve your demand via PowerShell. Here is a template you can refer to:
Param(
[Parameter(Mandatory=$True)]
[string]$webUrl,
[Parameter(Mandatory=$True)]
[string]$outPath
$web = Get-SPWeb $webUrl
write-host ("Path: " + $outPath)
foreach($list in $web.Lists)
$exportlist = $null
$exportlist = @()
$list.Items | foreach {
$hash = $null
$hash = @{}
foreach($fld in $_.Fields ){
Try {
$hash.add($fld.Title, $_[$fld.Title])
Catch [System.Management.Automation.MethodInvocationException]
# Eating an error caused by duplicate column names.
Finally
#"End"
write-host ("Exported: " + $_.Title)
$obj = New-Object PSObject -Property $hash #@{
$exportlist += $obj
$expath = $outPath + '\' + $list.Title + '.csv'
$exportlist | Export-Csv -path $expath #$oPath
Reference:
http://porchcode.blogspot.com/2013/04/exporting-sharepoint-list-items-to-csv.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Typing a phrase in the Address Bar of Firefox 3.6 used to lead me to the relevant website, but this doesn't happen in FF4, even though keyword.enabled value is set to true in the config page. Why doesn this happen?

In the about:config page the keyword.enabled value is set to "true". And the keyword.URL value is set to "default". When I type a phrase in the Address Bar, a page with a Yahoo! search result opens unlike intuitively loading the relevant page using Google. Why is this happening?

To use the Google's browse by name feature as used in Firefox 3.6, set keyword.URL to this link:
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]

What is the "Relevance" meter in iTunes store?

Here's our podcast: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=190110077
Our show is about Fantasy Football. If you search the iTunes store for Fantasy Football, you'll see that our popularity "meter" is pretty strong but why is the "relevance" meter so low? How do we get that higher? What does it mean?
Any help would be appreciated!
Thanks!

Well, it's probably a bunch of Apple voodoo that calculates those high scores, but...
Do you have any keywords listed in the channel info and item info sections of your RSS feed? If not, start there.
Next, you might want to expand the text for the show description. Make it longer than 6 words, and try to fit "fantasy football" in there a few times (it's only in there once right now). Maybe mention who the hosts are, and why people should care about them.
I don't know if it really matters, but it may help to fit "fantasy football" in each of the episode desriptions. Think of this as optimizing your website so that search engines will hit on certain keywords.
Who knows. At least your popular!
Jon
Dual 2.3 G5 4BG RAM Mac OS X (10.4.6) The Rest of Everest Video Podcast therestofeverest.com

Are there restrictions on the number of files i can work on trial version of elements 13

i am currently using the trial version of pe13 and have been editing and saving images - after about 10 images (all saved 2-8MB) the file sizes have shrunk to less than 1MB even though the edits and stuff i am doing to the images is exactly the same - what's going on as i want to print these images, please help!?

No, no restrictions with the trial version other than you cannot use it beyond the 30 day free trial period without buying it.

JSSE Export Restriction Error

I am moving a client application from Java SDK 1.3 to Java SDK 1.4. I was previously using version 1.0.3 of JSSE but am currently using the later version shipped with SDK 1.4. I get the following error when trying to connect.
Export restriction: SunJSSE only
From what I can gather, this is caused by restrictions imposed by the American government on certain cypher suites but this should not apply to me since I am located in North America.
I can get rid of this error by removing the following entry from the security providers list in the java.security file.
security.provider.2=com.sun.net.ssl.internal.ssl.Provider
However, I then get the following error:
Algorithm TLS not available
Any help would be greatly appreciated.
Cheers,
BL

I have the same error when using JSSE in a weblogic application, if my JSSE .jar files are in the context of the application.
I got rid of this error by installing the files in the directory/jre/lib/extHowever, this annoys the server administrator because the installation is not standard anymore in case of rebuild after crash.
pda

Exporting images from the Captivate 5 Library

I am able to export Captivate 4 images to a folder. I am able to export Captivate 5 images to a folder, but they cannot be opened with Fireworks or any other application I've tried. Although the file is a bmp, Fireworks says, "Could not open the file. Unknown file type." Am I the only one experiencing this problem?
thomas

Yes. I can right-click and edit a background in Fireworks, but what I'm talking about here is different. Captivate has long offered the option to export images from the library. This has been, and still is easy. The difference is that it doesn't work. The exported files are not readable.

Shuffle wont sync because it cannot find the relevant disk !

My iPod shuffle (3rd generation) sync's when its plugged in, but when i go to sync it after checking/unchecking my music or attempting to chane details in my summary field, it wont sync. A meesage appears and says something like "Unable to sync ".....ipod". The relevant disk cannot be found" Whats all that about ?

Hello, vizords.
Thank you for the question. You will need to enable the menu bar in iTunes 11 so you can access the store menu which will allow you to authorize the computer. Here are the steps on how to process this.
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11 for Windows: Authorize a computer to play iTunes Store purchases
http://support.apple.com/kb/PH12511
Cheers,
Jason H.

About JCE export restrictions by the relevant law

Similar Messages

Maybe you are looking for