About K8N Neo4 Platinum temperature (NV Monitor and CoreCenter)

OK, ¿Who is the good one?
Also i have a temperature panel in my case, and the temperature is different too.

Quote from: nuxeretes on 02-March-05, 20:24:53
OK, ¿Who is the good one?
Also i have a temperature panel in my case, and the temperature is different too.
Every software does read data from sm bus. That one is true. However each of them does calculation on its own and performs compensation. Just for example; vcore calculation looks like this: $20*0.00488 + 0.69 which turns into 1.41.
Finally booth of them are right. The board has 3 sensors: CPU, Board, "something". NvMonitor shows CPU and "something" while corecenter shows CPU and Board.
NvMonitor can't be trusted, they produce northbridge and it is up to board manufacturer to select monitoring chips (winbond, lm,etc) on board. Therefore I would rather believe to the corecenter.
I suggest using Motherboard Monitor MBM and using my custom data for monitoring the temps:
http://213.214.52.181/Motherboard Monitor MBM 5.3.7.0 for MSI Neo4 Data Only.rar
Also, I believe that "something" is a temperature of the northbridge, but compensation must be added. CoreCenter shall fix this isue, but then... why they didn't do that before... because "something" is not for northbridge as I thought... who knows... yeah whatever, who cares...

Similar Messages

K8N Neo4 Platinum (PCB 1.0) and AMD 64 3800+ X2

Help!
I have a K8N Neo4 Platinum (PCB 1.0) and it had an AMD 64 3200+ single core CPU.
Now I've upgraded to an AMD 64 3800+ X2 dual core but the BIOS and MS Vista are seeing only the one core.
The BIOS is at the latest version - 1.D.
Whats' going on?
Hitch.

Quote from: hitchhiker on 20-April-07, 08:44:57
This motherboard does support the X2 CPU right?
It's listed as supported on the MSI website but has nayone else got both cores running on it?
Hitch.
Yes it does support X2
Did you clear cmos with power cable disconnected from psu?
Look at my signature for link to proper method.

K8N Neo4 Platinum random lock-ups and BSOD

I built a new PC about 3 months ago and from day 1 it has always locked up / frozen at random intervals. Sometimes it also BSOD's with a Machine Check Exception. Seems to lock up / freeze more often when have multifple windows open eg. Multiple IE running but really is random. I have replaced the Mobo and Ram but keep having the same issues. Have tried a clean install but no luck either. Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
System is as follows:
MSI K8N Neo4 Platinum [Bios 1.D]
AMD Athlon 64 X2 3800+ DC [AMD Drivers]
2 x Kingston 1024Mb ram [Dual Channel]
Nvidia 6800 Ultra [Latest Drivers 91.31]
Thermaltake Purepower 460W PSU +3.3V 30A, +5V 30A +12V 15A
Western Digital 200G SATA II HDD [SATA Port 5 i think]
1 x LG DVD +-R/RW [IDE Master] IDE port closest to edge of Mobo
1 x LG CDR/RW [IDE Slave]
MS XP Home SP2

Quote from: davePC on 09-August-06, 09:06:44
Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
Seemed fine?
There isn't really be any difference between an IDE drive and a sata.
Except that the sata drive needs some drivers as your installing the os.
Check your ram timings in bios but likely it's your psu.
Which components are on which rail?
The ones that use the +12v are your cpu,cdrom,dvdrom and graphics card.
Try disconnecting both roms and see if it improves things?

K8N Neo4 Platinum with 90nm San Diego 4000+

Hello everyone,
My first post here. Tomorrow I'm purchasing a K8N Neo4 Platinum MB (non SLI) and have requested the retail seller to get me a 90nm San Diego 4000+ instead of the older 130nm Clawhammer 4000+. Now, after reading through this forum it appears there may be a compatibility issue with the San Diego chip. Should I change to the Clawhammer or go ahead with the San Diego. I don't plan on OCing for a couple of months. What should I do?
Thanks!

Quote from: JJWOLD on 21-May-05, 19:55:22
Tom899
I just fired up my K8n Neo4/sli with a 4000 rev.e chip last night, Bios is showing 3.0 and working like it should. Have it hooked to a Enermax 535 watt and One Evga 6800gt pci-e with the second card still in the box, I want to give it a good update and test before I bring the second card online, Cpu running at 35c with the side of under a Thermalright xp 90C Heatsink fan blowing down, want to test it fan blowing up next. Good luck it's a nice chip.
JJWOLD, thanks for the update, good news for me. I picked up the board last night, the rest of the stuff should be here next week. I'm going to load it with WinXP 64, which I know has limited driver support but I have three other computers so I'll just take it very slow on additional hardware and software installations. I may even use the integrated sound for now. By the way, did your board come with the 1394 cable and bracket?
Thanks!

Difference between K8N Neo4 Platinum/SLI and K8N-SLI Platinum

Hey guys.... I have one question and i hope you can help me.
I'm about to get an MSI SLI Platinum motherboard, but it seems that there are two versions, the K8N Neo4 Platinum/SLI and the K8N-SLI Platinum.
What is the real difference between them? As i can see in the manual, the Neo4 version has the additional SATA2 and Gbit LAN controller.
Anyone: Does your K8N-SLI board have 4 or 6 SATA2 ports? and 1 or 2 LANs?
At this picture http://www.midtdata.dk/asp/index.asp?varernr=K8N-SLI-PLAT&goto=productinfo&mainfunc=link I can see that there are 6 blue SATA connectors (lower right corner), and 2 LAN ports left to the LPT port... But the description says 4 SATA and 1 LAN, and so says the manual.
To all owners of this mobo: Does this picture look like your K8N-SLI Platinum or does it look like your K8N Neo4 Platinum/SLI ?

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

K8N Neo4 Platinum SLI and BIOS goofiness

A couple nights ago I figured I'd flash my K8N Neo4 Platinum SLI to the latest BIOS version, since I hadn't touched it in over a year. I was using 3.1, and I decided to use the 3.A. Big mistake. Computer boots fine, but immediately bluescreens as soon as Windows tries to load. After diddling around on my brother's computer trying to make a bootable CD, I manage to get back to a state where I can flash again, and try the 3.7. Same problem...bluescreen on Windows startup. At that point I just gave up and went back to 3.1, ignoring the 3.3 and 3.2 BIOSes.
Is anyone else having issues trying to flash the more recent BIOSes?
(I just recently found out that MSI's US site doesn't have a complete list of available BIOSes, while the Taiwanese site does. I might have to give 3.9 and 3.8 a try.)
EDIT: My system specs are in the link in my sig.

Ok, quick update. I just spent about half an hour with 3.1, 3.2, 3.3, 3.4, 3.7, 3.8, 3.9, and 3.A. None of them work except 3.1...they all bluescreen while starting Windows. I made sure to clear the CMOS completely, yes I left APIC/MPS settings the same (they've always been on default so that hasn't been an issue), and I tried the various safe modes.
Here's the error code given on the BSOD: 0x0000007B (0xF78A6528, 0xC0000034, 0x00000000, 0x00000000)
A quick search on the 0x0000007B error code gives a fairly lengthy MS KB article, but no real solution. I'm at a loss as to why 3.1 works great but nothing else does.

K8N Neo4 Platinum nForce4 Ultra and 4 GB SDRAM DDR 400 Problem

I have the K8N Neo4 Platinum nForce4 Ultra and 4 1GB sticks of Corsair ValueSelect DDR 400 (PC 3200), model VS1GB400C3, filling all four slots. The BIOS recognizes about 2.88 GB of total memory. The MSI manual states:
Quote
Due to the South Bridge resource deployment, the system density
will only be detected up to 3+GB (not full 4GB) when each
DIMM is installed with an 1GB memory module.
I'm not sure what this means. Does it mean that I'm "wasting" my SDRAM, that not all of it is used, or does it mean that all of it will be used and the BIOS just reports a smaller number?

Hi.
You seems not familiar with X86....
As you should know, Windows XP and most OS are 32 bits. That mean that every memory pointer is 32 bits, thus allowing to address 4Gb of memory.
BUT
In most OS, there is a difference between the kernel and the user. So, in most OS, the memory is divided in two 2Gb block (no matter how many Gb of Ram you really have!). The first one is for the OS, the 2nd for the user program.
So, If you have for example 3Gb of ram, in the best case, you have 1gb for system and 2Gb for user program.
To allow more Ram to fonction, PAE (Physical Address Extension) was made. Instead of 32, you got 36 bits for you pointers.
But as X86-32 CPUs can't handle more than 32 bits, a reserved area was made within 4Gb to allow Memory to be copied from the area the program want to read.
Exemple:
You got a server with 8Gb of ram. In windows, you only see 3.5+512Mb PAE.
If a program need to address memory in the 7-7.5 Range for example, the chipset copy the data from the 7-7.5 range to the 3.5-4 range in order to allow the CPU to get access: that's VERY slow.
So, in short: You can't have and don't need 4Gb of ram on 32bits OS.
(And there's even more place occupied by every card (AGP, PCI, PCI-e)....)
That's why XP64 is so interresting for programmers who needs lots of ram (Database....). When used with a chipset who know how to deal with lots of ram (I don't know if NForce4 can do it but I doubt it), you can load in memory a 4Gb Database.
But In all case, the bios should say 3.5Gb, not 2 and so on. You must have a problem with one of your stick. My guess is that they are all double sided and that you should slow down the memory to 333MHz.
(Or better: Send back 2x1Gb stick and get 2x512 SINGLE SIDED stick, unless you REALLY NEED 1.5Gb for your system !)

PSU Dead and MOBO K8N Neo4 Platinum SLI Too, what can i do???

Yerterday i was sleeping and suddenly the PSU (Rosewill RP550) Blow away, I Inmediatly check the PSU and guess what? Fried!!! Then i went to sleep again to check the other components in the mourning. The next Mourning i took my old PSU and put an 20 to 24 pin adapter, placed it in the mobo and doesn´t work, next i put a friend PSU with 24 pin connector and nothing, next i test 2 or 3 PSUs more and nothing. After all this tests i started thinking that the mobo was having electrical issues. I went to a friend house and tested the processor ( AMD 3000+ CBBID 0505) and the Memory (OCZ Rev2 1GB), they worked. I couldn´t test the Video Card (MSI 6600GT 128MB) because i dont have any other mobo to check it.
Its Important to tell you guys that when i try to plug the PSU power conector to the MOBO the Fans and network led start for 1 second, then turn off, i try to start the computer and nothing happend. All this with the four PSUs.
A friend of mine which is a computers Technician told me that took off the MOBO batery, CPU and Memory and put Aluminiun foil all over and around the mobo to eliminate any static on it. What do yo think about this??
Please if you have any suggestion, i´ll be happy.
BTW: Which are the procedures to RMA both componnets ? I bough the mobo and PSU and the others components on www.newegg.com on May 09 2005.
Thanks for all.

Got my Newegg RMA board back (K8N Neo4 Platinum SLI) today! I mailed it to them Friday, they got it Monday and a replacement back to me today. Excellent turnaround
The board looks like it was refurbished because the anti-static bag was a bit wrinkled and had pinholes all over one section where the board couldn't have caused it. Also, it had bios 3.0 on it! The rest of the stuff in the board looks new but it didn't come with the USB 2.0 bracket which the first board I got did. Live and learn.
I flashed it to 3.2 and all appears to be working. Not gonna try 3.3. I read somewhere that there may be a beta 3.5 bios out somewhere. Maybe I'll wait till that one goes final.
Haven't had any experience with MSI support as far as RMA's but if this replacement board craps out I'll try them next.

K8N Neo4 Platinum and wake-on-lan

Hi,
I don't understand if the MSi K8N Neo4 Platinum has wake on lan capability..
There is in BIOS a setting in power manegement, but it's not loisting 'wake on lan'. In Windows (XP Pro), I can find a tool from MSI where I can setup a date/time for the PC to boot up, but nothing about WOL.
Can it do WOL ?
How does it work ?
Thanks for your help,
Rico

Wake On LAN, developed from Intel, provides remote wake-up technology that enables
systems to be remotely powered "on" for off hour’s tasks.
A result of the Intel-IBM Advanced Manageability Alliance and part of the
Wired for Management Baseline Specification, this technology helps save time on automated software
installations, upgrades, disk backups and virus scans.
Wake on LAN technology resides in a managed network adapter and on the system motherboard.
Please see the Intel web site for more information on WOL technology.
http://support.intel.com/support/network/sb/CS-000084.htm

K8N NEO4 Platinum and PCIE Clock

I have K8N NEO4 Platinum, AMD FX55, 2X512 Crucial Ballistix PC4200, PowerColor X850XT VIVO, 3X74 HD WD Raptor.
I have a big problem with this motherboard and Video card.
I have set CPU clock at 250mhz (because I have DDR500), now the PCE clock is 100mhz. Is synchronous with CPU clock? If yes is there a moltiplicator to change the PCIE clock(my videocard is 400mhz), because It provokes artefacts in the Post , in the bios,and continues shutdown of the system( first appears the windows “VPU RECOVER”, than shutdown) and the visualization is full of artefacts.
The question is: Pcie clock is asynchronous or synchronous with CPU Clock, when is disable spectrum in cellmenu?

I have K8N NEO4 Platinum, AMD FX55, 2X512 Crucial Ballistix PC4200, PowerColor X850XT VIVO, 3X74 HD WD Raptor.
The question is: Pcie clock is asynchronous or synchronous with CPU Clock, when is disable spectrum in cellmenu?

K8N Neo4 Platinum problems

I have one questions and one problem for you all:
Why do i have to disable CPU-spread spectrum to get the right PCI-clock ( if you believe ntune ) ?
Strange things happen??:
I have Seti@Home ( a very CPU-intensive application ) as my screen saver. I was supprised to see that my new computer ( Athlon 3800+, 1GB ram ) seems to be slower than my old AtlonXP 1700+! What was happening here? My investigations result was: Whenever the screensaver is active the cpu is clocked down. I come to this conclusion because first the computer is really slow and second the cpu-temperature was almost on idle levels ( measured with ntune ). When i disable the screensaver at all and let seti run as normal application everything is as expected. Well either this is WindowsXp SP2 or the bios i would say - before anyone has to ask: Cool'n Quite is disabled in bios. Anyone else has the same effekt?
Thanks for any reply.
My System in detail:
WindowsXP SP2 with uptodate drivers
MSI K8n Neo4 Platinum motherboard
AMD Athlon 3800+
1GB ram Corsair Twinx1024 XMS 3200XL ( 2x512MB ) in Dimm slot 3,4
Asus GeForce 6800 GT graphic card
Creative Audigy Player sound card
HDDs: WD Raptor 74GB + Hitachi 250GB SATA
Plextor DVD and LITE-ON sohw-1673s DVD-burner
WinTV PCI

Quote from: Assaf on 13-April-05, 04:39:15
Spread spectrum means the frequency is modulated (not constant) - so it will be measured differantly.
I don't see this as an issue, but why do you need it enabled anyway ?
The frequency thing is strange since Cool'n Quiet is disabled, maybe you have Core Center running and doing something to the frequency ?
Thanks for the reply.
Naturally i don't need the spread spectrum, but it was enabled by default and i was curious.
No, core center ( or something similar ) isn't running. Atm i don't want to change any frequencies, i just want to build it as stable as possible ( and fast, naturally ). And one other thing: seti is running quite well - it needs 2 to 2.5 hours to process a seti-work-unit - when the computer is running normal, but it slows down to about 1/3 of its speed when seti is running as screensaver, it needs 6 hours and more to complete one seti-work-unit. Isn't that exactly what Cool'nQuiet is doing ( among other things ) : reducing the clock speed to one third? :-(
Btw. in bios the ACPI Standby State is set to S1 ( i think that may be of interest ). I am running bios version 1.2
Well, atm i have disabled ( in windows ) any power management ( and screensavers ) and the computer doesn't throttle down the processor any more.
Well, someone has any idea how i can find out what is the problem with my computer?
Thanks in advance for any reply.

MSI 6600GT PCI-E or MSI K8N Neo4 Platinum ?

Dear Sirs,
I've just bought a MSI NX6600 TD GT 128MB PCI-E and
Motherboard MSI K8N Neo4 Platinum.
I Think that one of these is defective bacause WinXP can't work with MSI original drivers, MSI old drivers or Nvidia drivers. The system reboots.
I think that i've tried almost everything and this card only works badly with VesaSave driver (Generic Windows driver).
Could a defective video card works ?
Is it possible that the problem is the Motherboard ?
Any idea ?
Help me please,
Thank you very much,
ISW
MSI K8N Neo4 Platinum
A64 3500+ Winchester
Original Cooler
DDR PC4000 GEIL 1GB ULTRA DUAL
MSI NX6600 TD GT 128MB PCI-E
Maxtor 120GB
Seagate 120GB
XP Home SP2

About PSU I'm a old (41 years old) newbie, and I had to re-assemble my old computer to work but I check this before with MSI software and at motherboard bios voltage check and remember that it was ok it is a 600 watts. But I think that even if it is not, I could at minus install the driver and start Windows. I had no possibility to even start Windows.
If I install any MSI or Nvidia driver, when loading WindowsXP the screen turns black and at some time after the system reboots and prompts to start in secure mode. So I can't do anything, even starts Windows with this videoboard with right drivers. It only works with "VesaSafe" driver.
ISW

BSOD's on my x64 K8N Neo4 Platinum based PC, Any ideas what's wrong? Help!

Over the past few month I've been getting BSOD's. There is no real pattern to their occurence and it's not something which is constantly happening (It happened around 5 times in the past 2 months), but I've really grown to hate them. You see, after getting one what has happened in the past is that when I go to restart my pc after getting a BSOD, I find I need to re-install my whole OS! What happens is that after booting (which oddly enough doesn't work well after a BSOD, It freezes on the boot screen and I need to restart several times), a black screen appears telling me that certain files in the C:Windows\ direcotory are corrupt or missing.
So the real problem is that the BSOD's cause me to re-install my whole OS. One will happen, then it will be ok, I turn the system on, log into windows, then it might happen again, after which I'll need to re-install. The files that go missing are always different too, and when I run scan-disk (after plugging in my main drive into another computer) it finds corrupt files and deletes them.
At first I thought it was Azureus (p2p client) which was causing the problems because it seemed to happen when I was runing that. I stopped using it, and the BSOD's still occured...sometimes randomly when browsing...etc. I figured that since files got deleted and corrpupted, it must be a problem withthe Hard Drive....So I bought a new one, and I've still had the BSOD error (although files haven't been deleted yet).
So yeah, I really need to solve this problem as it is taking away from my productivity and causing me to re-install far too often. I will post the BSOD info as well as my system info below (and a screen shot):
Quote
MACHINE_CHECK_EXCEPTION
*** STOP: 0x0000009c (0x0000000000000004,0xFFFFF80000113BC0, 0x00000000B2000000, 0x0000000000070F0F)
I looked that up on the net, and it seems the first part seems to indicate, or at least COULD indicate overheating. I checked CPU and System temps and they seem acceptable.
I am running Windows XP x64 Edition with the following hardware (please note that all of the hardware drivers I'm using are written for x64, MSI is so good:)). I have had this PC before it started having these problems, it could be related to using x64 I guess, but the error doesn't show that does it?
Quote
AMD Athlon 64 3200+ 2.0 GHz Socket 939 (Venice Core) w/ stock heatsink/fan
MSI K8N Neo4 Platinum S-939 nForce4 Ultra
OCZ PC-3200 DDR400 Premier Series 1GB (2x512MB) Dual Channel Kit CAS 2.5
Ati Radeon x800xl 256MB gddr3, PCI-E
LG 17" L1720B LCD monitor 16ms, 1280x1024
Western Digital Caviar 120GB SATA
Western Digital Caviar SATA II (WD1600JS) 160GB 7200RPM 8MB Buffer
Western Digital Caviar SATA II (WD2500KS) 250GB 7200RPM 16MB Buffer
Pioneer DVR-109 DVD-RW
Pioneer DVR-110D DVD-RW
Antec Sonata II Mid tower ATX black power supply 450 Watt ( ATX12V 2.01 )
Creative I-Trigue 2.1 L3450 speakers
Sony 1.44MB Floppy Disk Drive
Microsoft multimedia keyboard and Microsoft optical mouse (PS/2)
My OS and drivers are fully updated. As for my BIOS I've been running the version I'm using now forquite some time and I believe it is version 1.5. Also in another bad turn of events, my northbridge fan seems to be on its way out of this world (this just happned so I don't think its related to the BSOD). I haven't been able to find a replacement, and since its not spinning very fast, and sometimes stops...It's causing the heatsink to get quite hot. I need to get a new one, and I can't find them anywhere...I wonder if thats covered under warranty... I looked into getting a different heatsink, but my Graphics card is so colse to this heatsink, that theres no room for a bigger one at all.
Do you think this problem is motherboard related, I cannot understand what the technical info the BSOD gives me means, can anybody understand it? I don't think its my HD's, or Ram, or CPU...could it be a motherboard problem? And if so, its under 1 year old, can I get an RMA?
Thanks for the help in advance.

At one time I had a weak 450w psu that had only 18a on the 12v rail. When I overclocked my cpu and gpu, I was getting bsod's every once in a while and couldnt figure it out until I read a similar post like yours on this forum. I decided to upgrade my psu and havent had that problem since.
Power supplies can be deceiving. I now have a 480w psu but its has 30a on the 12v rail. So what we need to know is the ratings of your psu (see my sig) just to see if your psu is the culprit. Just my 2 cents.

K8N Neo4 Platinum, how to move MBR to sata (make it drive #1)?

I am not sure I am phrasing the question correctly, so bear with me. I have a K8N Neo4 platinum with the SiI3114 controller and sata ports 4-8 (I believe its what they are calling PCB 1.x) with bios v1.D. I moved the board to another box and installed winXP on it. I was running it with IDE hard drives. Everything was working great but the OS was running really slow so I bought a SATA 300 mb/s drive and pluged it into SATA1 (I read about using ports 3 and 4 for raid but I do not want to use the NVraid at all, it is disabled). Then I proceeded to reinstall win XP. In the setup, I deleted the original C partiton and created one on the sata drive and rebooted so that there would be no "C" drive confusion by the winxp setup (have had that problem before and this keeps it from happening). Went through the setup and the sata was correctly reported as "C". Told windows to install itself there but it told me that it needed to write to MBR on the old c drive but that, since I had deleted the partiton, it couldn't and had to format it. So I knew that something was wrong.
So I rebooted and disabled the ide bus that contained the old IDE drive and just left the CD ide bus enabled. WinXP installed fine with no complaints. Then it rebooted and I re-enabled the ide bus in the bios. It wouldn't boot into the partiton I just installed winxp on! To get it to boot, I had to use F11 (the bios boot menu) and select the sata drive. Went through the whole setup winXP thing and rebooted. Same problem, it wouldn't boot the sata drive. :(
As long as that ide bus with the old ide drive is enabled, it won't boot the sata drive! I have rearranged the boot order on the bios every way possible. I opened up the box and moved that ide chain with the old ide drive to the ide2 port and put the dvd drive on ide1. I made the old drive slave and the prior slave master. That didn't fix it either. How do I tell this motherboard that the 1st drive is the sata drive? How do I tell it the MBR should be there not on the old ide drive? How do I fix this? Thanks!

Thank you for your replies! Hans, thank you I will give it a go again doing full formats all the way. I usually use the full format when installing winXP but I did things in a different order than you instructed so I will definately try it.
Aicjofs, thank you, There are 3 hard drives in this system currently. There is the ide hard drive that used to be the "c" drive (a western digital 160gb ata133 7200rpm 8mb cache) and a second ide hard drive that is an extended partition with 1 logical drive with data on it (western digital 300gb ata133 7200rpm 8mb cache). Then there is a sata hard drive in sata1 port with 2 partitions one primary and one extended. The extended partion does have data on it as I moved stuff there after I got winXP up the 2nd time (western digital 250gb sata II 7200rpm 16mg cache). Right now, I have the ide drive with data on it as ide2 master and the old "c" drive as ide2 slave and it is unformatted and contains no partion information (I deleted the partition after I installed the SATA drive and installed winXP). XP won't boot. What happens is that, if I take the winxp cd out, it gives me a "no system" error. If I leave the WinXP cd in it boots that disk. However, if I use "f11" and choose to boot the sata drive, winxp comes up just fine. If I disable the ide bus with the two ide hard drives, it boots winxp just fine.
Edit: bios is v1.D. It feels like this mobo is telling windows setup that the master ide drive is the first disk and to ignore everything else. It feels like if I can just tell the mobo that the sata drive is the first disk then everything will work . It is late night where I am now, and I've been fighting with this since the afternoon so I might have to goto sleep but I will be back at it tomorrow and will go though what Hans instructed. If anyone has any otehr ideas, I'd really appreciate that as well.

Strange power-on (issue?) with K8N Neo4 Platinum

Hi all, i have a new K8N Neo4 Platinum, non-sli.
My rig:
A643000+ winch, no overclock
2x512MB Corsair XMS DDR400MHz
2x200GB Seagate mirroring
Plextor PX-708A
BenQ DVD Burner
AN OLD Matrox Mystique 4MB PCI (new pci-e gfx card later...)
A powerfull enermax coolergiant 600W ATX 2.0 power supply
Latest official nforce4 drivers and bios
It seems to be ok: installed winXP pro sp2 and updates, installed two Seagate in raid-mirroring with the nforce4 controller, installed some progs and utils, firewall is ok, prime95 go without problems for 1 our (more tests later), cpu temp is 34°C and sys temp is 30°C.
CoreCenter Say:
Vcore -> 1.41V
3.3V -> 3.39V
+5V -> 5.13V
+12V -> 12.26V
memory volt -> 2.60V
FSB -> 200MHz
PCI-E -> 100MHz
cpu volt -> By-VID
Apparently no weird things...
When i switch-on the Pc, for some seconds( ̃10 secs) it don't want to boot, optical drives blink repeatly and the screen is blank, like a bad overclock... But the machine isn't overclocked, and the bios is ok, i think. After 10 secs, finally it go and run flawlessly, post and other things are ok. When i reboot in win, the 10secs-issue repeat itself. So this strange thing at the post is normal? Anyone with the same "problem"? For now the rig is ok when it logon in winXP...

Hi all my friends
@JER101 >>> Ehrr i mean post, sorry
I had unplugged the optical drives, but the problem persist. When plugged, they blink for some times and after blinking the machine go into post-phase and after it boot in the correct manner. I think the PCI card is the problem, like some of you said... I will buy one pci-e card (obviously), but i hope things are not dangerous for now
In the mean time, i have a new problem: emule+firewall=BSOD. I know, there are tons of post about this issue around, but the solution is unclear... Tried to disable DEP, patched WinXP SP2 with latest things from winupdate, but nothing work for me, emule and the firewall generate a crash&reboot. Tried with the Marvell LAN, too, without success.
Any suggestions? Usefull links? If i uninstall the "NVIDIA Forceware Network Access Manager" it will work without problem with a thirdy part firewall, like sysgate?
P.S.
What's the problem with nvidia drivers? C'mon nvidia, solve this damned issue!

About K8N Neo4 Platinum temperature (NV Monitor and CoreCenter)

Similar Messages

Maybe you are looking for