About last patch

hi,
Where to get the latest patch download for forms 6i (win)?
It's possible to install only the last patch or some problems occurs?
Thanks in advance
Guglielmo

You can download patch 16 from metalink. The patches are cumulative, so you can install it straight over the 6i rel 2 distribution.

Similar Messages

Outlook 2013 since last patch (Dec 2014) gives error: System Administrator - Undeliverable

After installing the latest round of patches from Microsoft in our environment, we have had numerous users having this issue. When sending an email, internally or externally, they get the following message.
Your message did not reach some or all of the intended recipients.
From: System Administrator
Subject: Undeliverable: Email Subject
      Subject: Email Subject
      Sent: 12/16/2014 9:21 AM
The following recipient(s) cannot be reached:
Person#1 on 12/16/2014 9:21 AM
            This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
The problem is sporadic and sometimes just closing Outlook and reopening it will fix the problem. The problem does happen both when the users are in the office and when they are out. There isn't any pattern that we can identify. It
happened to me once and a reboot resolved it for me. We thought that maybe a specific patch that was installed just needed another reboot but we still have other users that are having the problem even after numerous reboots.
A little more about our environment:
Exchange 2010, fully patched with all service packs and updates (single server)
Running on a Windows 2008R2 server with all service packs and updates
Outlook 2013 with all updates installed
Happening on both Windows 8.1 (fully updated) and Windows 7 (fully updated)
Again this just started happening after the last patch cycle and we have never had this situation occur prior to that.
Steve Eason, MCSE FM:Systems

If you installed Exchange 2010 SP3 RU8 then you need to update to the 2nd revision of that update, as the first one had that very issue.
Update 12/12/2014:
Exchange Server 2010 SP3 Update Rollup 8 has been re-released to the Microsoft download center resolving a regression discovered in the initial release. The update RU8 package corrects the issue which impacted users connecting to Exchange from Outlook. The
issue was insulated to the MAPI RPC layer and was able to be isolated to quickly deliver the updated RU8 package. The updated RU8 package is version number 14.03.0224.002 if you need to confirm you have the updated package. The updates for Exchange Server
2013 and 2007 were not impacted by this regression and have not been updated.
Update 12/10/2014:
An issue has been identified in the Exchange Server 2010 SP3 Update Rollup 8. The update has been recalled and is no longer available on the download center pending a new RU8 release. Customers should not proceed with deployments of this update
until the new RU8 version is made available. Customers who have already started deployment of RU8 should rollback this update.
The issue impacts the ability of Outlook to connect to Exchange, thus we are taking the action to recall the RU8 to resolve this problem. We will deliver a revised RU8 package as soon as the issue can be isolated, corrected, and validated. We will
publish further updates to this blog post regarding RU8.
This issue only impacts the Exchange Server 2010 SP3 RU8 update, the other updates remain valid and customers can continue with deployment of these packages.
https://www.microsoft.com/en-us/download/details.aspx?id=45225
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Again after last patch: Windows 64 - PDF preview handler not working

Adobe's PDF preview handler doesn't work unter Windows XP/Vista/7 64 bit. Because of that PDF preview e.g. in Windows explorer or MS Outlook isn't displaying PDF preview.
This issue has been discussed in this forum some months ago, and this page gives a solution that has helped:
http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html#fixer
Instead of fixing this well-known issue with the last patch Adobe decided again not to fix. And after installing the patch you have to repair PDF preview handler again...
Friendly
Philipp
Philipp
http://ferienbretagne.livejournal.com
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit, Acrobat 9

Hi Sree,
According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
https://forums.adobe.com/community/adobe_reader_forums
By the way, after do some search, it seems not working for 64bit machine,
>> It is working fine in Windows 7 and Vista
Also work fine in win7/vista 64bit????
If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need info about 9004119 patch

Hi,
I'm currently trying active/passive configuration with oracle RAC, and found that Oracle RAC one node is the solution. During my search, i also found some forum explaining how to convert to RAC one node and says that i need to download patch -9004119. This patch would be installed on RAC and so on.
I'm just not able to find this patch, Could anyone provide me the downloadable/installable or the link of *9004119*
Also, any examples or links of active/passive failovers would be really helpful. I'm doing trial and error method from a long time but no luck!
Just to mention,
Oracle RAC : active /active: mainly used for load balacing.
Oracle RAC one node: Active/passive : mainly used for cold failovers
Thanks in advance!
Cheers
Megha

Again, RAC one-node enables you, in certain scenarios, to have 2 instances up for a specific amount of time. If you need only active-passive without the option to have 2 instances up you can use the Oracle database as a regular resource. You can read about it here: http://blogs.oracle.com/xpsoluxdb/entry/clusterware_11gr2_setting_up_an_activepassive_failover_configuration
You can read about RAC one node here: http://docs.oracle.com/cd/E11882_01/rac.112/e16795/onenode.htm#RACAD7894
And again, I don't know about the patch, but I'm trying to understand if you need rac one-node, or maybe a regular active-passive is enough for you.
Liron

Require official Oracle Best Practices about PSU patches

A customer complained about the following
Your company statements are not clear...
On your web page - http://www.oracle.com/security/critical-patch-update.html
The following is stated!
Critical Patch Update
Fixes for security vulnerabilities are released in quarterly Critical Patch Updates (CPU), on dates announced a year in advance and published on the Oracle Technology Network. The patches address significant security vulnerabilities and include other fixes that are prerequisites for the security fixes included in the CPU.
The major products patched are Oracle Database Server, Oracle Application Server, Oracle Enterprise Manager, Oracle Collaboration Suite, Oracle E-Business Suite, PeopleSoft Enterprise Tools, PeopleSoft CRM, JD Edwards EnterpriseOne, JD Edwards OneWorld XE, Oracle WebLogic Suite, Oracle Communications and Primavera Product Suite.
Oracle recommends that CPUs be the primary means of applying security fixes to all affected products as they are released more frequently than patch sets and new product releases.
BENEFITS
* Maximum Security—Vulnerabilities are addressed through the CPU in order of severity. This process ensures that the most critical security holes are patched first, resulting in a better security posture for the organization.
* Lower Administration Costs—Patch updates are cumulative for many Oracle products. This ensures that the application of the latest CPU resolves all previously addressed vulnerabilities.
* Simplified Patch Management—A fixed CPU schedule takes the guesswork out of patch management. The schedule is also designed to avoid typical "blackout dates" during which customers cannot typically alter their production environments.
PROGRAM FEATURES
* Cumulative versus one-off patches—The Oracle Database Server, Oracle Application Server, Oracle Enterprise Manager, Oracle Collaboration Suite, Oracle Communications Suite and Oracle WebLogic Suite patches are cumulative; each Critical Patch Update contains the security fixes from all previous Critical Patch Updates. In practical terms, the latest Critical Patch Update is the only one that needs to be applied if you are solely using these products, as it contains all required fixes. Fixes for other products, including Oracle E-Business Suite, PeopleSoft Enterprise Tools, PeopleSoft CRM, JD Edwards EnterpriseOne, and JD Edwards OneWorld XE are released as one-off patches, so it is necessary to refer to previous Critical Patch Update advisories to find all patches that may need to be applied.
* Prioritizing security fixes—Oracle fixes significant security vulnerabilities in severity order, regardless of who found the issue—whether the issue was found by a customer, a third party security researcher or by Oracle.
* Sequence of security fixes—Security vulnerabilities are first fixed in the current code line. This is the code being developed for a future major release of the product. The fixes are scheduled for inclusion in a future Critical Patch Update. However, fixes may be backported for inclusion in future patch sets or product releases that are released before their inclusion in a future Critical Patch Update.
* Communication policy for security fixes—Each Critical Patch Update includes an advisory. This advisory lists the products affected by the Critical Patch Update and contains a risk matrix for each affected product.
* Security alerts—Security alerts provide a notification designed to address a single bug or a small number of bugs. Security Alerts have been replaced by scheduled CPUs since January 2005. Unique or dangerous threats can still generate Security Alert email notifications through MetaLink and the Oracle Technology Network.
Nowhere in that statement is the Patch Set Update even mentioned. If Oracle intends to recommend to all customers that Patch Set Updates are the recommended means of Patching for Security and Functionality then it should be stated so here!
Please clarify!
Where can I find the current information so that I can use to Official Oracle statement as a reference for my Enterprise Practices and Standards document? The individual patch package references you are giving me do not state Oracle recommended Best Practice, they only speak to the specific patch package they describe. These do not help me in making an Enterprise statement of Practices and Standards.
I need to close the process out to capture a window of availability for Practices and Standards approval.
Do we have any Best Practice document about PSU patches available for customers?

cnawrati wrote:
A customer complained about the following
Your company statements are not clear...
On your web page - http://www.oracle.com/security/critical-patch-update.html
Who is the "your" to which you are referring?
<snip>
Nowhere in that statement is the Patch Set Update even mentioned. If Oracle intends to recommend to all customers that Patch Set Updates are the recommended means of Patching for Security and Functionality then it should be stated so here!Um. OK
Please clarify!
Of whom are you asking for a clarification?
Where can I find the current information so that I can use to Official Oracle statement as a reference for my Enterprise Practices and Standards document? The individual patch package references you Who is the "you" to which you refer?
are giving me do not state Oracle recommended Best Practice, they only speak to the specific patch package they describe. These do not help me in making an Enterprise statement of Practices and Standards.
I need to close the process out to capture a window of availability for Practices and Standards approval.
Be our guest.
Do we What do you mean "we", Kemosabi?
have any Best Practice document about PSU patches available for customers?This is a very confusing posting, but overall it looks like you are under the impression that this forum is some kind of channel for communicating back to Oracle Crop anything that happens to be on your mind about their corporate web site and/or policies and practices. Please be advised that this forum is simply a platform provided BY Oracle Corp as a peer operated user support group. No one here is responsible for anything on any Oracle web site. No one here is responsible for any content anywhere in the oracle.com domain, outside of their own personal posting on this forum. In other words, you can complain all you want about Oracle's policy, practice, and support, but "there's no one here but us chickens."

Install last patch maxdb 7.6.06.05

Hello,
I want to install the last patch 7.06.06.05
which is the difference between :
MAXDB 7.6.06.05 Server Package
MAXDB 7.6.06.05 Application Runtime Package
MAXDB 7.6.06.05 Web Services Package
do I have to download and install the 3?
Thank you
Best Regards
Frédéric Blaise
e-Kenz S.A.

Hello Frédéric Blaise,
1)Are you SAP customer?
2) "which is the difference between :
MAXDB 7.6.06.05 Server Package
MAXDB 7.6.06.05 Application Runtime Package
MAXDB 7.6.06.05 Web Services Package "
"MAXDB 7.6.06.05 Server Package" has Server and client software Components
of the OLTP database system;
"MAXDB 7.6.06.05 Application Runtime Package" has only Client software for the SAP application server;
"MAXDB 7.6.06.05 Web Services Package" has Web Tools Software Components;
In more details please see SAP MaxDB Library 7.6 sections installation profiles & software components
at
http://maxdb.sap.com/doc/7_6/default.htm -> Installation -> Installation Manual
3) If the database and application running on the same server, you need "MAXDB 7.6.06.05 Server Package" to update the database to the version 7.6.06.05. The MAXDB client software will be updated on this server during the database upgrade, if it has lower as 7.6.06.05 version .
Thank you and best regards, Natalia Khlopina

Windows 7 unable to connect to mobile hotspot after last patch

Hi,
I recently re-installed the Windows 7 on my laptop. I applied a lot of patches.
I have two phones: one blackberry curve and an android Samsung Galaxy Nexus.
Since yesterday I was able to start the tethering on the smartphone and activate the mobile hotspot. Windows 7 was able to connect to the mobile hotspot without any problem.
Yesterday evening I applied the last patches and this morning I restarted the PC to applied them.
Now Windows is not more able to connect to any mobile hotspot. However, is still able to connect to a standard Cisco WiFi network.
Does anybody have any idea why?
Thanks

Since issue only occurred after you installed the last patches, in addition to the wifi driver, I also suggest you uninstall the latest patches for a test, seems something conflits with them, what is the result?
Regards
Yolanda
TechNet Community Support

Unknown Error (-53) after last "Patch Tuesday"

I'm unable to sync my iPod Touch since the day after last "Patch Tuesday". I get an alert referencing an "unknown error (-53)" every time I try to sync. I've tried the usual windows steps; uninstall and reinstall, reboot multiple times, disable all anti-virus, anti-spam, firewall, curse, pray, etc. I've done a search here and Googled but haven't seen any discussions.
Is anybody else having this problem or is it just another windows anomaly requiring a format and clean install?

thokra wrote:
Experience the same problem after installing the latest update and cant do anything now.
Have someone with a PC running Windows XP download the shuffle Reset Utility and apply it to your shuffle.

Doubt about Rollup Patches and Family Packs

Hi All,
What is the difference between Rollup patches and family packs?And also applying family packs will increase the codelvel?Please specify the naming convention of both the pacthes also.
Thanks
Rajasekar

Thanks Kashif M &Hussein for your valuable replies.I've read the links. As per the documennt in r12.
Product family release update pack (product family RUP) An aggregation of patches on a given codeline created for all products in specific product family for a specific point release. For example, R12.FIN_PF.A.1.
Release update pack (RUP) A cumulative aggregation of product family release update packs on a given codeline created across Oracle E-Business Suite after the initial release. For example, 12.1.1.
RUP in r12 is similar to family pack(11i) which will change the third digit (12.1.1 to 12.1.2).right?
Product family release update pack(family pack) with new features called rollup patch?
(or)
About rollup patch I read in one apps dba blog
Rollup patces are usually fixes of all issues popped up because of a particular minipack/familypack or maintenance pack. Lets assume you applied a family pack & because of that some issue/bug came into picture or all bugs reported soon after family pack or maintenance pack are fixed and released as Roll Up patch . These are usually denoted as roll up 1 rollup 2 or roll up A roll up B.
So you will see maintenance pack 10 (11.5.10) roll up 1 or roll up2.
How can we identify the roll up level?
Thanks
Rajasekar
Edited by: user9113570 on Jun 5, 2012 8:30 AM

Where does JDeveloper save the info about last opened jspx / files ?

Hi all,
In JDev 10.1.3.1, Where does JDeveloper save the info about last opened jspx / files ?
e.g:
opened pages are : page1.jspx and faces-config.xml
after we save and close JDeveloper and Open again, i will start with same opened page/files : page1.jspx and faces-config.xml.
Where does JDeveloper save this settings ?
Thank you,
xtanto

Xtanto,
its jdeveloper_home\jdev\system\oracle.ide.10.1.3.<version>\preferences.xml
The most recent entries are last on the list. The editor reference also indicates whether this file was opened in WYSIWYG or Editor view
Frank

About Installling patches in Solaris9

Hello,
I need to install Oracle10 in Solaris9, i have installed the the following about requiered patches 112233-11, SunOS 5.9: Kernel Patch
111722-04, SunOS 5.9: Math Library (libm) patch:
showrev -p |grep 111722-04
Patch: 111722-04 Obsoletes: Requires: Incompatibles: Packages: SUNWlibms, SUNWlmsx, SUNWlibm
# showrev -p |grep 112233-11
Patch: 112874-31 Obsoletes: 113165-01, 113475-03, 115480-01 Requires: 112233-11 Incompatibles: Packages: SUNWcsr, SUNWcsl, SUNWcslx, SUNWhea, SUNWarc, SUNWarcx, SUNWcstl, SUNWcstlx, SUNWdpl, SUNWdplx
Patch: 112874-34 Obsoletes: 113165-01, 113475-03, 115480-01 Requires: 112233-11 Incompatibles: Packages: SUNWcsr, SUNWcsl, SUNWcslx, SUNWhea, SUNWarc, SUNWarcx, SUNWcstl, SUNWcstlx, SUNWdpl, SUNWdplx
Do i really have installed the patch 112233-11?, it would be dangerous to install it?, i have ORACLE9 and WEBSPHERE in the same server.
Than you

Hello Pablo,
118558-33 was obsoleted by 118558-39 on 11 Jan 2007. I would recommend to visit the [*Oracle forums*|http://forums.oracle.com/forums/main.jspa] and/or the contract-customer-only patch forum (this is a [*link*|http://blogs.sun.com/patch/entry/patch_forums_now_available_for] to an blog entry describing a procedure to access this "private" forum).
I don't know if it's save to apply the latest Solaris 9 patch cluster. You can use updatemanager or PCA to install missing patches.
[*BigAdmin Feature Article: Patch Management Best Practices*|http://www.sun.com/bigadmin/features/articles/patch_management.jsp]
[*BigAdmin Description - PCA - Patch Check Advanced*|http://www.sun.com/bigadmin/jsp/descFile.jsp?url=descAll/pca__patch_check_ad]
Michael

When was last patch applied

Is there a way I can see when the last patch was applied to a database ?

Refer :
How to know the patches applied on DB?

What is Sun's answer about PCA patch manager free tool ?

Hi all,
this post aims on echoing customers'feedback.
from customers'experience it seems that smpatch from patch manager tool is suffering of a lack of reliability.
One of them moved to a new freeware called PCA-Patch Check Advanced
http://www.par.univie.ac.at/solaris/pca/
From PCA Web Site we can read:
Sun has offered various tools in the past to analyze Sun/Solaris systems for patches which are installed or missing, e.g. PatchDiag, PatchCheck, PatchPro, smpatch (see the Sun Patch Portal for details). Some of them are not actively maintained, some are huge and opaque, some don't run on older Solaris releases or stripped-down machines. None of them really made me happy. Based on PatchCheck source I implemented PCA, which gets rid of the disadvantages of Sun's own tools.
I would like to know what is Sun's position and could it be possible to integrate such a tool ?
Thanks.
Malek.

- Sun is always interested in customer feedback, and is interested in
the concerns expressed here.I'd also very muck like Sun to be interested in fixing the customers problems, which has not been done in my cases. No solution or explanation has been given to my many cases opened on smpatch, and this, even though in some cases, patches were made (months later): I was never told about them. Which makes me wonder about the point of having paid support contracts in the first place.
But since UM was developed by interns, it's no wonder there's trouble maintaining it (how do I know? I've been an intern doing Java development, and I made the exact same beginner's mistakes, not knowing to handle exceptions, leaving debug output on stdout, being unable to make proper localisation).
It's obviously not the work of experienced Java programmers. Hard to trust it...
- We do understand that opaque is bad, but one of Sun's goals is to
provide complex analysis beyond matching patches with installed
packages. This analysis and its support processes will necessarily
be somewhat opaque.What analysis are you talking about? smpatch is not even able to tell me that security fixes are available for NSS, which has been part of Solaris for years. PCA does.
And what about Studio? Why can't smpatch tell me there are patches for that, too? And why aren't free patches, that are neither recommended nor security (such as the man patches) shown by smpatch when running without a contract?
- We are interested in the concerns surrounding stripped-dow
systems, and are considering a "light" version of our tools that would
support minimal systems. However at this time there are no plans to
release a light version.And what about systems without a network?
And what about not forcing me to read and agreeing to a, abusive license agreement, which can't even be printed, nor shown full screen (5 lines at a time!)?
And, please, can you explain me why I should agree to respect Reuters so-called intellectual property? What does it have to do to with keeping my systems up to date reliably and easily? Is it a competition between Sun and Microsoft to put the most ludicrous licenses on line?
Anyway, I'm sure Solaris 11 will introduce some new bloated offspring of the PatchProManagerUpdateConnection family, so I'm not holding my breath. Rather than repeat this experience again and again, I'll stick with PCA.
Laurent

What about support patches?

hi,
anyone please send me good information about basis support patches ECC 5.0.
and also send what are the use full support patches in Basis administration.
regards,
[email protected]

Check
http://service.sap.com/patches
All information you request is there.
Markus

Mini won't reboot after last patch install.

I was installing the patch yesterday and during the patch install it said there was a problem with the install. After that the computer was running slow so I decided to reboot. Now all I can get is the circle of sticks with the apple logo but I never get beyond that.
I can eject a CD by holding the mouse button.
I press C while the install disc is in but it never re-installs
All my data is on an external USB drive so I don't mind reinstalling but I'd like to be able to do so without paying someone at the apple store to do it.
Also tried holding the option key.. nothing
tried the open firmware combination.. nothing
What else can I do?

Hi Fastfwd, and a warm welcome to the forums!
Tough without the Install disc working, but some things to try...
Mini PMU reset...
http://support.apple.com/kb/HT2183
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Do you have another 10.4.x Mac around?
How to use FireWire target disk mode...
http://docs.info.apple.com/article.html?artnum=58583

About last patch

Similar Messages

Maybe you are looking for