About local object
Hi,
I don't know if here is the place correct to ask this but maybe someone can help me. Where can I see the local objects?? Because I save a program in local object but I need it to change the package but I can't.
Well I hope someone can help me
Thanks
go to tx: se80
on left side select local objects
and give your login name
you will get list of objects saved locally by this login
to change package:
right click(context menu) on your object(program etc)->more functions->change package.
regards
Message was edited by: Hemendra Singh Manral
Similar Messages
-
A question about creating packages as local objects in ABAP
Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
DariyooshThomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh -
Question about Local Variables (Multiple answers welcomed!)
A couple of questions about Local Variables
1. Programmers always say: “Do not abuse of Local Variables”. I’d like to know, when and where Local variable are most efficiently used?
2. If I have to create a couple of local variables, is there anyway to “clone” them without going through the repetitive “create/local variables” mouse click each time? (When I try to copy and paste, it creates a new variables instead of the one that I am trying to reproduce)
3. Which is faster in execution: Updating a variable through a) writing to property node/value or b) through local variable
Everyone’s input is welcomed, so if this question is already answered, please
feel free to add additional comments/answers!1. Use Local Variables in user interface code and no where else. The only exception is using a local variable of a cluster output to define the datatype for a bundle by name node.
2. You can drag copy them then right click to get to a menu of all the currently defined controls and indicators on the VI.
3. B. The problem with A is that it forces a thread switch to the user interface thread--which can take time if you aren't already in it, and it's a very convoluted process under the hood. NI's advice never update indicator values through a property node unless you absolutely, positively can't figure out some other way of doing it.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Hi All,
Some of my objects in query builder has been saved as local objects. Can anyone please tell me how to include those objects in a transport request.
I searched the sdn but did not find anything. They do talk about changing the package but how to collect them and put it in the request.
ThanksHi,
Just refer this forum.
Re: Transport of Queries
Hope this will solve your purpose, no need to repeat here same thing.
Still problem then tell me.
Regards, -
Hi All,
Please let me know whether there is a table which holds information about the PROGRAM's reference to other objects.
For Example, say program A uses n number of references to other objects like data elements, calls n number of Function Modules, tables ect. Is there any table or FM that lists all these references?
Please do reply.Hi Saravanan,
The better way is to get all the references for all type of objects like programs,Function modules,function groups,packages ,classes,interfaces,BSP applications,local objects, inactive objects,etc, the ultimate tcode is SE80,
there u can find everything about the above said objects.
Regards
Arani Bhaskar -
Notification about cache objects changes when node dies
Hi Guys,
Coherence 3.3.1/389
.Net API 3.3.1.2
Sorry, i did not find in forum something similar to my question.
Well, i have this situation:
I have 8 Coherence nodes.
I have one client connected to Coherence node number 1.
The client have been listening for notifications about cache objects changes.
Coherence node number 1 dead for some reason (not enough memory).
What's happened with the client which was connected to this node?
I think it just reconnect to other one, but what's happened with notifications which occurs until the client reconnects?
Regards,
Dmitry.Hi Dmitry,
Notifications are delivered only while the client is connected. So if the client or its proxy fail, upon reconnection, the client will need to recover appropriately.
If you're using Coherence's built-in client-side data management features (such as Near cache or ContinuousQueryCache), Coherence will do this for you automatically (resynchronizing the local datasets).
One other comment, the reconnection attempt is lazy and the client will not reconnect until your application code touches a clustered resource.
(EDIT: If store-and-forward guarantees are required, then you can queue those messages on the server on a per-client basis in a dedicated NamedCache, which the client can then consume at its leisure whenever connected. This is an application-level construct.)
Jon Purdy
Oracle -
The Local Object can be clustered?
I hava two EJB in one jar file.One EJB is a Local Interface Entity Bean,another
is a remote Interface Session Bean.The Session Bean calls the Entity Bean.I deploy
the jar file into weblogic 6.1 cluster.I want to know the jar file can be clustered.I
seem to see that Local Interface cann't be clustered in some documents.
Thanks for answer!
I'm sorry for not providing you the document.In fact all the documents I ever saw
say that the local object can't be clustered in WLS6.1 .But I really test a situation
that can be clustered.I was also every puzzled.The situation is depicted as followed.But
the situation can only implement the load balance while the Fail-over failed.
"Shan" <[email protected]> wrote:
>
>Could you tell me the url to the document about
>clustering local entity bean?
>thanks!
>Shan
>"Sunrise" <[email protected]> wrote:
>>
>>Yes!I found that Local Object such as Local Entity Bean can also be
>clustered!
>>Thanks!
>>
>>"Sabha" <[email protected]> wrote:
>>>Local interface is only accessible within the same application -- so,
>>>its
>>>client can only be local to the server and again within the same
>>>application -- so , it does not matter whether its deployed in a cluster
>>>or
>>>not. Only the other related ejb who is looking it up needs to be deployed
>>>wherever the localinterface Bean object is deployed.
>>>
>>>- Sabha
>>>
>>>"Sunrise" <[email protected]> wrote in message
>>>news:[email protected]...
>>>>
>>>> I hava two EJB in one jar file.One EJB is a Local Interface Entity
>>>Bean,another
>>>> is a remote Interface Session Bean.The Session Bean calls the Entity
>>>Bean.I deploy
>>>> the jar file into weblogic 6.1 cluster.I want to know the jar file
>>>can be
>>>clustered.I
>>>> seem to see that Local Interface cann't be clustered in some documents.
>>>> Thanks for answer!
>>>
>>>
>>
>
-
How to get Date Format from Local Object.
Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web ChannelHi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer. -
How to append contents of a local object to dynamic internal table ?
Dear ABAP-Specialists,
i am trying to append contents of a local object to a dynamic table. The most relevant lines are the ones written in bold
I guess the append is the problem due to the reason that a unknown format has to be assigned to a fixed format somehow.
+METHOD wddomodifyview .+
+DATA lo_ui_root TYPE REF TO if_wd_view_element.+
+DATA lo_container TYPE REF TO cl_wd_uielement_container.+
+DATA lo_table TYPE REF TO cl_wd_table.+
+DATA lo_table_column TYPE REF TO cl_wd_table_column.+
+DATA lv_tabname TYPE tabname.+
+DATA lt_output TYPE TABLE OF sychar512.+
+DATA lo_data TYPE REF TO data.+
+DATA:+
+lo_node_output_data TYPE REF TO if_wd_context_node,+
+lo_node_table_list TYPE REF TO if_wd_context_node,+
+lo_node_differences TYPE REF TO if_wd_context_node,+
+lo_node_output TYPE REF TO if_wd_context_node,+
+lt_all_elem_differences TYPE wdr_context_element_set,+
+lo_elem_table_list TYPE REF TO if_wd_context_element,+
+lo_elem_differences TYPE REF TO if_wd_context_element,+
+ls_differences TYPE if_table_differences=>element_differences,+
+lt_differences TYPE STANDARD TABLE OF if_table_differences=>element_differences.+
+FIELD-SYMBOLS:+
+<ls_output> TYPE ANY,+
+<lt_output> TYPE ANY TABLE.+
+ ....+
+*CREATE DATA lo_data TYPE TABLE OF (lv_tabname).*+
+*ASSIGN lo_data->* TO <lt_output>.*+
+*LOOP AT lt_differences INTO ls_differences.*+
+** APPEND ls_differences-ct_line TO lo_data->*.*+
+*ENDLOOP.* ....+
+ENDMETHOD.+
Thanks a lot in advance for your Ideas.
Best regards
Carsten Klatt
Please post in the correct forum and use code tags to format your code
Edited by: Rob Burbank on Oct 1, 2010 1:27 PMThis might help - you should not reference the data reference directly:
DATA: lt_t001 TYPE TABLE OF t001,
ls_t001 TYPE t001.
DATA: lr_dref TYPE REF TO data.
DATA: lv_tabname TYPE tabname.
FIELD-SYMBOLS: <lfs> TYPE table,
<lfs_line> TYPE ANY.
lv_tabname = 'T001'.
TRY.
CREATE DATA lr_dref TYPE TABLE OF (lv_tabname).
ASSIGN lr_dref->* TO <lfs>.
CATCH cx_sy_create_data_error.
* Do something
ENDTRY.
SELECT * FROM t001 INTO TABLE lt_t001.
LOOP AT lt_t001 INTO ls_t001.
ASSIGN ls_t001 TO <lfs_line>.
APPEND <lfs_line> TO <lfs>.
ENDLOOP. -
A perticular Project automatically saving in the local Object
Hi,
I have an issue regarding ther local Object .. I have different projects need to save in Transport Requests. I observed a perticular project while saving it is generating a transport request number but saving in local object.
Can you please give me more suggessions to solve this problem ...
Thanks in advance ..
Shashi,SamalHi Shashi,
If it is getting assigned to a TR then it can't be local object.
Can you give some more details. Also which system, version you are on.
Regards,
Atish -
How to pass a locale object into another function?
Greetings,
i like to pass a locale object into another function. These are my code below
import java.util.*;
public class Locales{
public static void main(String[] args){
Locale locale= new Locale("EN", "US");
convert(locale);
public void convert(Locale convert)
String language = convert.getDisplayLanguage();
System.out.println(language);
}I got this error:
Locales.java:6: non-static method convert(java.util.Locale) cannot be referenced from a static content
convert(locale);
^How do i correct it?
ThanksDid you bother to do a search?
Did you bother to read any of the material that the search would have linked you to?
If you had then you would be able to understand where you are going wrong and how to fix it yourself. Instead of being spoonfed by us. -
Screen 910 getting saved in Local object - not even asking for Package
Hi ABAPers,
I am using Enhancement CONFPP07 and for this created Z project in CMOD.
When I am creating the screen 910 for the screen exit SAPLCORU_S of that Z Project, that 910 is getting created in Local object not even asking for the Package and the request.
I tried to create that screen from the SE80 in the function group XCOF, there also it is getting saved in local object.
I tried to do it from SE51 also, but arrived that screen in the local object only.
Please Suggest me with your valuable comments.
Thanks and Regards
Pinaki MukherjeeDo a version management on the screen and see if it was ever created before and then deleted. If so, reassign it to the package you want.
Rob -
Getting information about an object from JList
Hi
I have created a movie application and i have a JList displaying all registered movies, it uses a DefaultListModel to display these.
I want to be able to click on an element in the JList and then push a button called "Show movie details" to display all information about the selected movie.'.
Every new movie is added to the DefaultListModel as an object with "Titlle", "Genere" etc. If someone click on a movie, what do i do to get information about which object that was clicked. All i can see is that integers can be returned with the getSelectedIndex/Value methods. If i use one of these methods to get the object from the DefaultListModel, that would work i guess, but what when someone deletes a movie in the middle of the JList, then the indexes wouldnt match.
Can someone help me out here? :)I get a big fat exception when trying to cast the returned object to a Movie object which im using.
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: java.lang.S
tring cannot be cast to Movie
...sure that this is the way to do it? If so, what am i doing wrong.. -
Copying from client through se71 is getting saved as local object only?
hi.
i am copying the form from std to z form through se71.but after doing copy from client,it is getting saved automatically s a local objct $tmp.
Also,there is no option enabled to save it to transportable object.
in se80,in the object list also that object is not reflecting.check it
Re: local object to transport request for a form
just go to SE03 > object Directory > change object directory entries -
Problem in saving 'Z' develpments to Local Object
Hi Experts,
Let me explain my the client settings first -
I'm working on a implementation project. We have a development server having four clients as 311 sandbox, 322 - customizing client (Without transactions and masters), 411 - Testing client and 422 as a golden master with all configuration and master data.
The path is 322 >> 411 >> 422
We do not have configured TMS till now.
While i'm creating any 'Z' development whether report or table or do any changes on the 311 client i.e. sand box and saving it as a local object or save in a request the changes or newly created reports can directly affect the upto client master i.e. 422 without transporting the request.
Because of this i'm facing problems as if i created any report just for testing on 311 i.e. sandbox it directly appears on every client without transporting request even when it has been saved in the local object. Also if i do any changes in any sap standard screen, program or in any object as per SAP notes on 311 they directly affects whole development system.
Please guide me how to set the system landscape to avoide this.
Thanks
AmolHi,
all development and client independend customizing is visible at once at all clients of an SAP instance.
You have create separate instances like YA1(100) = DEV; YA2(100) = TEST; and YA3(100) = PROD. As a customizing sandbox in DEV a separate cleient might be helpfull.
All instances could be created at the same server in an early stage of the project. Later at least for production a separate server should be used.
Some consultants with some experience could save costs in such a project.
Kind regards,
HP
Maybe you are looking for
-
Invoice getting generated for 103 MT not for 105 during ERS
Hi Experts, I am facing one problem ,our client follows 103- 105 Mvt procedure for GR. the requirement is to create automatic invoice through MRRL for movement type 105 but instead zero value invoice is getting generated for 103 MVT Please suggest.
-
Hi, I'm surprised I can't quickly find if anyone else is having this issue. For me it has been going on since Lion on my 13" MacBook Pro 2011 and it's still persisting in Mavericks, and even still now that I've "downgraded" to a 15" MacBook Pro 2010
-
Need to know how records can be deleted from a talbe when user hits cancel report
In my report I am inserting some records in to a table in the before report trigger and deleting in after report trigger. If the user hits the cancel report when the report is processing the records in the records never gets deleted from the table. I
-
Changing the table name while drill down at the dashboard query
I have a DAY fact table that has about 1B rows. The purpose of this table is to store on hand quantity for each item per day. On the presentation layer I have a dashboard that will display average on hand qty per year and then user can drill down to
-
How can i find out my password it is # I have 2 ipads