About Macbook pro Retina Display
Why the Macbook pro Retina display's coating will fall?
Even if you could install additional RAM, no MBP to date has been configured to accept 32 GB RAM.
Ciao.
A quick search suggests that there are no 204 pin DDR3 1600 Hz RAM chips available.
Message was edited by: OGELTHORPE
Similar Messages
-
My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks
Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
In the meantime, can attempt an SMC Reset to see if it helps. -
About to upgrade MacBook Pro Retina Display
Is it possible to upgrade the hardware of my MacBook Pro Retina Display with 16GB RAM and 256 SSD to 32 GB RAM?
Even if you could install additional RAM, no MBP to date has been configured to accept 32 GB RAM.
Ciao.
A quick search suggests that there are no 204 pin DDR3 1600 Hz RAM chips available.
Message was edited by: OGELTHORPE -
I have always used the apple TV remote for my presentations. I bought a retina display last year for the betterment of my presentations and now I have to stand near my computer and hit a button to change my slides where as before I used my remote. Will a infra-red adapter work with the apple TV remote in the macbook pro retina display? Love my computer, but very disappointed not to have a remote for presentations that does not need the internet. Does anyone have any ideas?
Yes, I used that and it works great if you have wireless connection. Im looking for a remote that worked like the apple TV remote. My questions is, "Is there a USB infra-red remote that works with mac. I have found this one: Keyspan EZ1 easy presenter. It claims with works with PC and Mac and the reviews are good. Does anyone know anything about it or if it works with retina display macs?
-
How do I downgrade my MacBook Pro Retina Display from Mountain Lion to Lion?
I have a brand new MacBook Pro Retina Display that came with OS X 10.8.1.
I´m an audio engineer so I work with Pro Tools, tons of plug-ins etc... Some of my software doesn't work with Mountain Lion just yet. Some of them haven't upgraded, and some of them I need to purchase a latest version, which is not cheap at all in the audio world. So I'd like to hang on to Lion for a while until I decide to upgrade everything to Mountain Lion.
I've seen other posts about this -> https://discussions.apple.com/thread/4148927?start=0&tstart=0
This one in particular managed to make the downgrade. However, he used to have OS X 10.7.4 in his retina display when he bought it. Which is something that doesn't happen in my case.
If you read the other post you can see that several methods have been tried.
Is it really safe to completely erase my hard drive and to a clean install of Lion? Will it work perfectly fine on my Retina Display?
I went to one Apple Store, and the guy asked around and told me they haven't done it before, so since they didn't know whether it was going to work they couldn't do it. He told me to do it myself and if something happened to my laptop, "just bring it in and we'll reinstall the stock OS X again."
Since the laptop is brand new I don't mind erasing everything, all my stuff is already backed up.
So help me please?The short of it is if it came with 10.8.1 you can't install an OS less than that.
-
So as I said in the title, I purchased my new Macbook Pro retina display OS X 10.7.4 in June 2012 and recieved in early July. Shortly after I started using the laptop, it began randomly restarting itself. It does this about once a week while I am just using the laptop for normal internet browsing. I haven't downloaded any outside software that the system could be rejecting and it is fully charged. Any ideas on why this is happening or how to fix it?
Also this is a total random question, but there is a residue on my laptop that is faint but randomly shows up. I'm almost positive that it is nothing on my hands or where I place the laptop. I wasn't sure if it was something possibly coming from the side vents. Thanks for the help!Exactly what Shootist007 states - take it in for service or replacement - could be a simple software issue or it could be a hardware issue...
Don't even bother messing with it.....Might screw up even more.....
Make sure your files are backed up in case they give you a replacement....
Good luck - hope you get it sorted out... -
How to keep display on in low light for windows 8 installed on macbook pro retina display
I am using macbook pro retina display 15". The Screen switches off in Windows 8 in low light conditions.
How do i resolve this issue?Hi,
Thanks for the reply,
But I already knew how to manage GPO of a remote computer via MMC, which I have even explained about it in my query.
I'm looking for the possibilities and methods of using GPMC to Manage GPO of a remote computer. -
Facetime and iMessage on Macbook Pro Retina display slow after Yosemite 10.10.3 Update
Hi
I recently updated my Macbook Pro Retina display to Yosemite 10.10.3 update. I see that the Facetime and iMessage has become relatively very slow. Like for example when someone calls on my phone it takes like more than 15 seconds + to show up on my macbook. Earlier it used to be like instant!
I started seeing this problem on Yosemite 10.10.3 update only. Also the same is the story with iMessage. When I get an SMS or an iMessage from my friends it takes like a good 30 seconds + to show up on my macbook pro.
Just for your information, this is the version of macbook i am using
MacBook Pro (Retina, 13-inch, Late 2013)
2.4 GHz Intel Core i5
8 GB 1600 MHz DDR3
251GB Flash storage
As Suggested by someone I also tried RESETTING my computer's PRAM. That didn't seem to help either. Can anyone help. If it is a genuine bug in Apple Yosemite, I'd like to file a bug in the community.
Regards
ShreyasHi Barney,
Here is the output you seek -->
Problem description:
FaceTime takes 30 seconds to open up
EtreCheck version: 2.1.8 (121)
Report generated 19 April 2015 8:13:14 am IST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro11,1
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 430
Video Information: ℹ️
Intel Iris
Color LCD spdisplays_2560x1600Retina
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 23:47:26
Disk Information: ℹ️
APPLE SSD SM0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 250.14 GB (111.66 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Viscosity
[not loaded] com.viscosityvpn.Viscosity.tap (1.0) [Click for support]
[not loaded] com.viscosityvpn.Viscosity.tun (1.0) [Click for support]
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist [Click for support]
[running] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] com.realvnc.vncserver.peruser.plist [Click for support]
[not loaded] com.realvnc.vncserver.prelogin.plist [Click for support]
[running] net.juniper.pulsetray.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.macromates.auth_server.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.realvnc.vncserver.plist [Click for support]
[loaded] com.sparklabs.ViscosityHelper.plist [Click for support]
[running] net.juniper.AccessService.plist [Click for support]
[not loaded] net.juniper.UninstallPulse.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Silverlight: Version: 4.1.10329.0 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
PepperFlashPlayer: Version: 17.0.0.169 - SDK 10.6 [Click for support]
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
ClickToFlash
Reload Button
YoutubeWide
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
18% mds
15% Safari
6% WindowServer
5% com.apple.WebKit.Networking
1% ocspd
Top Processes by Memory: ℹ️
455 MB softwareupdated
206 MB Microsoft Outlook
153 MB com.apple.WebKit.WebContent
146 MB WindowServer
137 MB Safari
Virtual Memory Information: ℹ️
298 MB Free RAM
3.76 GB Active RAM
3.36 GB Inactive RAM
1.17 GB Wired RAM
4.45 GB Page-ins
901 KB Page-outs
Diagnostics Information: ℹ️
Apr 18, 2015, 08:25:23 AM Self test - passed
Apr 17, 2015, 06:29:29 PM /Library/Logs/DiagnosticReports/ncproxyd_2015-04-17-182929_[redacted].crash
Apr 17, 2015, 03:11:05 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-04-17-151105_[ redacted].cpu_resource.diag [Click for details] -
Photoshop CS5.1 Pixelated on Macbook Pro Retina Display
Hello!
I am a photography student who just bought a new macbook pro retina display. I use Photoshop a lot for my course so need help with this as quick as possible.
Everything on Photoshop seems to be pixelated which is not ideal right now. I also have an iMac which runs the same version of Photoshop and that is absolutely fine, never had a problem. My friend suggested downloading a trial version of the CC as this automatically sorted hers out but did not mine. Any suggestions at all will be SO helpful as I've researched into this problem and are yet to find an answer!Very simple. The hiDPI Macintoshes and MacOS support for same were released after CS6 was released. Some of the CS6 applications got upgrades to support these hiDPI displays; others including InDesign did not get such upgrades until the CC 2013 version.
Sorry, but there is not anything you can do about this with CS5-vintage software.
- Dov -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
Screen on 15" Macbook Pro Retina Display.
I bough my 15" Macbook Pro Retina Display in August 2012. I recently noticed that when I open the macbook, I can see the screen shaking everytime I move the macbook pro on the table. I can feel it loose and when I touch it I test if it is loose I can see like 1/2mm movement back and forth when it is open.
I don't know if it is just me and my OCD sense senses for this macbook pro.
I just wanted to make sure.
Does it get loos when opening after you have used it for more than half a year?
Appreciate your oppinions!Your appointment at the genius Bar for an evaluation is free, in warranty or out.
They can explain why it wiggles, tell you whether that is normal or not, give advice about what you can do to reduce its annoyance, and fix it if it is not normal. That is what they are trained to do, all day every day.
There is no expectation that every time you visit they will find a way to make money off you, like a car dealership.
The Genius Bar service exists because Apple wants you to be a happy customer, if possible. If you are willing to make an appointement and come to them (spending your time and energy to do so) they will work with you for nothing in an attempt to solve your problems, whatever they may be. -
Macbook pro retina display is failing to play youtube videos.
Macbook pro retina display is failing to play youtube videos. I am currently using google chrome canary, but also when I try on safari it says "blocked plug in". I have downloaded and properly installed adobe flash player multiple times and it still isnt working. Does anyone else have this problem? And, is there anything I can do about this? Oh, and Ive tried updating both browsers. it has temporarily fixed the problem beofre but then eventually it comes back and I cant use youtube.
Wrong forum... you need the MacBOOK Pro forum.
-
HT201364 is the latest mavericks not for Macbook Pro retina display?
is the latest mavericks not for Macbook Pro retina display? i tried upgrading my latest macbook pro but unable too
i just got a new macbook pro retina display - A1502. When i check about my os it dispalys -
Software OS X 10.9 (13A3028).
So i went to the app store and tried downloading os x mavericks which is free.. then i get this message saying
We could not complete your purchase.
OS X Mavericks cannot be installed on this computer. -
2012 macbook pro retina display artifacts on screen when using onboard video
2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus. -
Does photoshop elements 12 support MacBook Pro retina display?
Does elements 12 support MacBook Pro retina display?
The point about whether to use an automatic process or not is a separate issue. I can understand that some people would not want to use it. However, even doing it manually in PE12 does not use the MWG standard.
Thanks for the pointer to the thread, which I note was started 2 years ago, with the last comment a year ago.
From that, I draw the conclusion that the PE developers see this as a very low priority. All the more reason for me to look at competitor products that do support this standard (e.g. Picasa and Photo Supreme).
Thanks again.
Maybe you are looking for
-
Can I connect a wireless printer to two wireless networks
I searched and couldn't find an answer to this exact situation. The answers to similar questions didn't seem to work. Can we share a wireless printer over two wireless networks without adding hardware or changing the wiring or doing complicated softw
-
App Store does not acknowledge installed software
Hi, I was wondering if someone could explain something to me. When the Mac App store first launched, I was able to see if updates were available for software already installed on my MacBook Pro (iLife, iWork, Delicious Library 2, etc.). Even though
-
Creating View for a table with parent child relation in table
I need help creating a view. It is on a base table which is a metadata table.It is usinf parent child relationship. There are four types of objects, Job, Workflow, Dataflow and ABAP dataflow. Job would be the root parent everytime. I have saved all t
-
How do I get my purchased list to go from one song to another? It stays on the same song. Thank you
Howdy I get my purchased songs to move to the next song ? It stayson the same song. thank you.
-
Lost my ipod touch can i find it if someone uses it
I lost my ipod touch can i find it if someone uses it