About MailboxCalendar folder Detail Level

Hi all
I'm using Exchange server 2013 and when i try to change detail level of 1 room mailbox using the cmdlets. It has below error and i cannot apply setting for the mailbox. Please help me?
[PS] C:\Windows\system32>Set-MailboxCalendarFolder -Identity roomtest:\Calendar -DetailLevel LimitedDetails
WARNING: An unexpected error has occurred and a Watson dump is being generated: Value cannot be null.
Parameter name: url
Value cannot be null.
Parameter name: url
    + CategoryInfo          : NotSpecified: (:) [Set-MailboxCalendarFolder], ArgumentNullException
    + FullyQualifiedErrorId : System.ArgumentNullException,Microsoft.Exchange.Management.StoreTasks.SetMailboxCa
   Folder

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Similar Messages

  • Add an extra :Tab" on the Purchase Order's ITEM DETAIL level.

    Hi:
    Can anyone please tell me how I go about to add an additional "TAB" on the Item Detail level of a Purchase Order...??
    Thanks.
    W.

    It is not possible to add extra tab by configuration .you have to use user exit/BADI to get this .
    user exit :MM06E005 
    BADI : ME_PROCESS_PO_CUST
    consult with your abaper for developemnt

  • Fixing at aggregate level & unfixing at detailed level.

    Hi,
    Our requirement is as given below......
    Our Demand Planning Process is Top-down process. Head Quarter will enter the demand at Territory, Channel and Product Group Level. These values are fixed and gets disaggregated to further planning level based on historical sales. The further planning levels are Sales Officer, Location & Product. Territory Manager can change the demand with in his targets across Sales officers (i.e. he should be able to change the targets of Sales officers without exceeding or reducing the Territory targets).
    Can anyone suggest how to fix the keyfigures at Aggregate Level without fixing it at detailed level. We tried FIX_CALC macro, but could not resolve the issue.
    Thanks in advance.
    SP

    You need to create AGGREGATES in your PLANNING OBJECT STRUCTURE, right click on POS and create  the following aggregates
    (1) ALL TERRITORY characteristics
    Now you will be able to fix at the top level and still be able to change at the detailed level.
    Read the following:* Let me know if you have any questions*
    Aggregate  
    Definition
    The aggregates in APO are not the same as those in the Business Information Warehouse (BW), but they have the same purpose: to speed up data access and therefore increase performance.  SAP recommends that you use aggregates in Demand Planning.
    These aggregates are sometimes referred to as persistent aggregates, in particular when talking about detail and aggregate levels in interactive planning.
    Use
    An APO aggregate contains a subset of the characteristics in the master planning object structure. The creation and use of aggregates is optional. The data is always saved on the lowest level of detail. If aggregates exist, the system saves the planning data on the defined aggregate levels as well as on the lowest level of detail. The data is saved twice, but consistently; that is, the sum of the details equals the aggregate value.
    SAP recommends that the aggregates you build in APO for planning data also exist in BW for actual data.
    If you want to save fixed values at aggregate level ; that is not at detail level of the master planning object structure, in a planning book, you must create aggregates for this level. Otherwise the data is only saved at detail level.
    You cannot form aggregates for navigational attributes
    See also:
    Fixing Key Figure Values
    Aggregates are discussed in detail in OSS note 503363. SAP recommends that you read this note thoroughly before configuring your master planning object structures and aggregate hierarchy.

  • Regarding the detailed level navigation theme change

    Dear Experts,
    I am using Light Detailed Level Navigation iview .And in the theme if I make change for the backgrond color of the theme related to DLN its not reflecting for the entire tray .For some part of the dln the changed color is reflecting(where and all links appears) in the other parts its showing the default color.
    Can someone help me in this regard.
    Thanks,
    Regards,
    Rudradev

    Hi Sunil,
    Do you really want to place the image at the right side of the TLN - or at the header (which is different)?
    In the first case, there is a mixture of JavaScript and JSPs (containing JS) which build up the TLN, and this is quite complicated to understand (at least too complicate for a SDN thread). You would have to work through the code and try to modify it carefully.
    In the secondd case, you are touching the wrong PAR, but you would know the right one (as you opened a different thread about such a modification).
    Alternatively, you could try to use the light framework page, using the navigation tag library. This way, it is more easy to design your own UI, including the nav functionality.
    Hope it helps
    Detlev

  • Tell AS to make new folder one level up

    How do I get AS to make a new folder one level up from myFolder i.e.
    set myFolder to ¬
    (choose folder with prompt "Where are the image files for which you want to change exif data ?") as reference
    make new folder at myFolder with properties {name:"Gallery JPEGs"}
    makes a new folder inside myFolder, but how do I tell it to move up one level from myFolder and make a new folder?
    Thanks.
    Pedro

    "AS?" What's that?
    myFolder? What application are you using? I think you are in the wrong forum.
    Shane

  • No Fact table exists at this detail level error

    Hi All,
    I am trying to develop an RPD and was trying to use a simple example of joining two fact tables in OBIEE through confirmed dimension.
    This is my example:
    Fact A: Student ID (FK)......Measure1, Measure2...
    Fact B: Student ID (FK)........Measure A, Measure B
    DIM 1: Student ID (PK),.....
    I would like to give the users the option of joining Fact A and Fact B through Dim 1( Which is a conforming Dimension)
    I tried with out level based hierarchy and got NO Fact exists at this level of detail.
    Then I tried creating the level based hierarchy on Dim 1 and selected the detail level for the fact table and I am still getting the error message.
    Am i doing some thing wrong here ?  Or Am i missing any important setting ?
    Is there a way to check whether the dimension is a conforming dimension or not in OBIEE.
    Your help is much appreciated.
    Thanks
    Venu

    Can we use between operator in physical join. We did that, its successfully checking in, but when we re-open the join, its show in RED color.
    So, got doubt, can we use between?When you checkout the rpd object in online mode it would display in red, this is not an error.
    "No fact table exists at the requested level of detail"; what does this error meanThis error usually happens if you have not mapped the content level correctly in the logical table source.
    Rgds,
    Dpka

  • Keeps asking for an address. and says something about protecting family details..is this a scam. what should i do? what address is it asking

    screen keeps asking for an address. and says something about protecting family details..is this a scam. what should i do? what address is it asking for. it is my elderly mothers I don't have one and am far away so I can't advise her. please help.
     I don't think it is an email as it comes up after she has turned it off/on

    tell her to go to settings/safari/clear history and clear cookies and data

  • Cannot change Detail level of IMAP, SMTP, or Junk logs

    I am running 10.4.7 Server and 10.4.7 version of Server Admin. When I go to the Mail -> Settings -> Logging Tab I cannot change the detail level. Or at least I can use the drop down menu, but when I press Save it either blanks out the drop down menus or just resets them back to their original levels.
    Is there a command I can use to change the Logs detail level via command line? Thanks in advance.

    changing log levels has been discussed here many times. use the search feature. if you have questions after you search, please post.

  • Navigating from detail level column in an hierarchy  to another report

    I have a requirement as folllows:
    In one report,i have a drill-down feature enabled on "TIME DIM".
    At The detail level of this dimension is "DAY" column.
    SO,from this detail level,when i click on "DAY" column, navigation should be done to another report..
    Is it possible to navigate so from detail report..
    pls let me know the solution for this requirement..
    thanks,
    seeusass

    Instead of Drill down,Give Navigation in first report to child report.But for this you need to create n reports if you are having n number of levels in hierarchy.Then at the detail level report you can give navigation at day level.
    Thanks
    Don

  • To create detailed level report which is preffered  cube or ods

    can any 1 plz justify for a new requirement ,detailed level reporting which is best and why.

    Hi Satish,
    Infocubes are preffered for Atomic and Summarized Reporting whereas DSOs are more detailed and granular.
    But there are certain major drawbacks of Using DSOs for Reporting :
    - Low performance as direct reporting will be extremly slow due to large amount of data stored in single table.
    - Multi-Dimensional analysis not possible.
    - Calculation overheads for KPIs
    Choice of DSO/Cube depends on the requirements but Infocubes are more preffered for reportings.
    Please check below links for more details to help make choice easier :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04a79b4-bbea-2b10-da86-bf0fe933fe34?quicklink=index&overridelayout=true
    http://infobyte.in/sap/(sap-bi)-difference-between-info-cube-and-dso-(datastore-object)/?action=printpage
    Regards,
    Akanksha

  • Authorization at Folder Tab level

    Hello Experts
                                 I have design a form which has lots of folder tabs , but now i want authorization at folder tab level, so that only authorized user has access to those tab, while unauthorize user is not able to see content inside the tab
    ex
    user1 - Full authorization
    user2 - No authorization on tab level
    Is it possible
    Plz suggest

    Hi,
    Yes u can write a small logic like that, for a specific user some folders will not be avaliable, for that i suggest u create a new UDT with some cols like user name, and folder item UID to restrict, so that the end user admin can update this table with the required folder item ID and user code as the users can change in the future,
    So u can have a logic like
    If loggedInUser = restrictedUser Then
    msgbox("Not authorized to view this information")
    bubbleevent = false
    End If
    U need to execute this logic in the item click event.
    Hope this helps,
    Vasu Natari.

  • How to show field at item detail level (purchase requisition layout)?

    Hi, gurus!
    We're trying to get field "processor" shown at item detail level (release strategy tab) when we create, modify or display
    a purchase requisition.
    We click on right button, select "Show" and get column name "Processor" in displayed columns and save layout as default,
    but that field is not visible when entering again transactions ME51N, ME52N or ME53N.
    Could anyone help us?
    Thanks in advance
    Regards,
    J Madariaga

    J,
    This field on the release strategy tab is linked to workflow.  You can maintain the "Processor" data by each release group and release code in the IMG menu path:  Materials Management -> Purchasing -> Purchase Requisition -> Release Procedure -> Set Up Procedure with Classification.'
    Here you enter a processor's entry under Workflow:
    Grp: Release group
    Code: Release code
    Plant: Plant
    Agent type: US is user
    Agent ID: UserID
    Once this is maintained, you return to the Release Codes section and enter a "1" by each Grp/Code where a workflow entry was created in table T16FW.  When you look at the release tab in the PR that has the same code as the one you created in the configuration, you will see the Workflow username (First and Last Name) in the "Processor" field.
    Hope this helps.

  • Adding a new Tab - ME22n - Item Detail Level

    Hi,
    This is a bit Urgent!
    I need to add a Tab to a TabStrip in Item Detail level, in ME22n that has a count of 12.
    Out of which 1 is custom made.
    Someone else had done this development and i can't figure out how it's done.
    Now, i am adding a 13th Tab.
    There is a Enhancement Project made in CMOD.
    Which has the component  MM06E004 added to it.
    I have added the subscreen 0201 to SAPLXM06.
    And activated the both the enhancement Project and SAPLXM06.
    In ME22n, i should be seeing the 13th Tab in the Item Detail level.
    But i can't.
    I have all together 23 fields... So i have no way but to add all the fields in a new Tab.
    Please help.
    Cheers,
    Remi

    Hi,
    There are some points which you need to keep in mind before implimenting this exit.
    First of all this is a transaction and check whether you need a selection screen ( of a program ) on your new tab which will be inserted in the transaction.
    And to create a field you need to enable one of the screens depending on your requirement.
    SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101
    SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111
    SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201
    SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211
    SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301
    SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311
    If you use any addditional fields you need to define these additional fields in following structures based on the requirement:
    CI_EKKODB
    CI_EKPODB
    To pass data from the PBO / PAI modules you have to enable the suitable function exit based on the requirement. Enabling these exits would pass data from / to the additional screen.
    EXIT_SAPMM06E_006
    EXIT_SAPMM06E_007
    EXIT_SAPMM06E_008
    EXIT_SAPMM06E_009
    EXIT_SAPMM06E_012
    EXIT_SAPMM06E_013
    EXIT_SAPMM06E_014
    EXIT_SAPMM06E_016
    EXIT_SAPMM06E_017
    EXIT_SAPMM06E_018
    So we can either add a additional tab at header level / item level in this transaction.
    Regards,
    Satish

  • Customize detail level navigation

    Hi,
    I want to create my own detail level navigation(dln) iview. I need to have the same functionality of the standard dln iview with minor changes.
    So my question is : Is there any par file provided by sap so that I can extend or simply reuse it.
    Next question is :
    From which jar files I can get the following classes.
    com.sapportals.common.PPLogger;
    com.sapportals.common.TracingConsts;
    com.sapportals.portal.useragent.IUserAgent;
    com.sapportals.portal.useragent.IUserAgentService;
    Thank you very much for the time.
    Best Regards,
    Shiva

    Hi Shiva,
    EP provides bak files for many of its UI, like masterhead,TLN etc. Like that it also provides the bak file for detailed navigation area.The par file is
    com.sap.portal.navigation.detailedtree.par.bak
    U can get this par file from server System Admin>>Support>>Portal Runtime>>Browse deployment>>WEB-INF>>Deployment>>pcd.
    Import this par file into ur NWDS and edit it accordingly.
    Hope this helps
    gEorgE

  • Getting info of detail level  of a dimension

    I have Oracle EE 10g with appr patch for OLAP option and AWM(10.2.0.3A).
    With the help of awxml.jar I am able to get dimensions,levels,hierarchy,attributes and cubes.
    But could you please suggest me what should I do to get the detail level of a dimension.
    Eg: For my time dimension,I have levels like Year,Qtr,month.
    These I am able to get through the java API.
    But I have to get Under Year 1998,1999,…..
    Under Qtr level I have Qtr1,Qtr2,…….
    Under month level I have Jan ,feb,mar…..
    all of these actually we have mapped to the relational tables.
    how do we get these level of info .
    And also if we have to retrieve the data values,i.e the cube info

    Also consider using the BI Beans components that are specifically designed to work with OLAP data sources. These can be built into any Java or thin client environment and provide pre-built data visualisations such as:
    Crosstab
    Graph
    Dimension lists
    Cascading dimension lists
    Measure lists
    Much depends on the type of application and client you are trying to create. You can get more information on this via the BI Beans home page on OTN.
    http://otn.oracle.com/products/bib/index.html
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

Maybe you are looking for