About Mass processing/Collective Processing Validation

Dear SAP MDG guru,
I have a question regarding mass processing/Collective processing in MDG
Are there any Badi, Or class that we can use in the screen collective processing (like below screen shot), i know that it had a check button like the screeshot below,
But it always give a no errors found, eventhough when you go to the single processing of each object,you can save it, even its give error message, and you can approve collective processing with the error data, and its really weird
so can anyone help me, can we use the check button to leverage the validation?

Hi
You can refer below link
Definition of Validations and Derivations - SAP Help Portal
It says SAP Triggered function
CHECK_ENTITY (Check entity): The system executes the function assigned to this event when entity values are validated during single or collective processing, when mass changes are made, or during the upload process.
So please see Technical help may be help to get your answer

Similar Messages

Mass processing for forecating in SOP

Hi all
I ma able to forecast a material online thru MC87 in standard SOP, but when I try to set up a variant for mass processing in the background the forecasting does not work. Has anybody encountered this issue?
thanks a lot

Tajuddin
Thanks for your reply. I am reading the R/3 documentation and it talks about Mass processing of SOP forecasting ( R/3 documentation verbiage below) I am trying to follow these steps but it does not work. Isn't this mass processing supposed to be for forecasting in mass in background?
Am i understanding this incorrectly?
How to Run the Forecast with Mass Processing
You can use SOPs mass processing function to run the forecast. In this process:
You create a forecast profile.
You create a planning activity and include in it this action (the forecast profile).
You create a mass processing job for this activity.
You schedule this mass processing job.
The results of the forecast will be different if the forecast is run at a high level and the results then disaggregated to the detailed level than if you carry out the forecast at the detailed level.

Mass processing & Back jobs

Hi Gurus
Can any one give me different background jobs and mass processing available in R3.
This is reqd urgent
Regards
Subbaraya

Mass Processing of Production Orders
Use
Mass processing enables you to carry out functions for multiple orders.
Features
Functions
The following lists contain the mass processing functions that are available:
Order headers
Material availability check
Release
Printing of shop floor papers
Costing
Scheduling
Generate capacity requirements
WM material staging
Picking
Set/delete user status
Confirmation
Technically complete
Close
Log display
Operations
Release
Print shop floor papers
Picking
Set/delete user status
Confirmation
Log display
Components
Print shop floor papers
Picking
Log display
Production resources and tools
Printing of shop floor papers
Log display
Starting Mass Processing
Mass processing can be started in the following ways:
Triggering the execution of a function
The execution of a function can be triggered as follows:
Execute function immediately
The functions are executed directly after mass processing has been triggered. This can take a long time for functions that require a lot of system resources. However, you can immediately check whether the function was successfully executed.
Execute function with dialog transaction
Further processing is controlled by a dialog that is specific to the function. This option is available for the following functions: Confirmation, Picking, Log display.
Create a function request (refer to Processing Requests)
First, requests are created without any further checks. The requests are created very quickly. Mass processing is actually executed with the program COWORKDISPATCH. As a result, it is delayed until the next time the program starts. You can decouple the function in terms of time, so that the main work takes place at night, for example. The end users create requests and system administration takes care of their execution.
Execute function in the background
First, requests are created without any further checks. Then a background process is started, which processes these requests immediately. Scheduling a background job does not create any administrative work and reduces the workload for the dialog.
Parallel Processing
For parallel processing, you define server groups for mass processing (COWORK-DIALOG, COWORK-BATCH). This enables you to speed up the execution of processing.
Mass processing online/ in the background.
You can either execute mass processing online or you can schedule it in a background job (no online steps are possible).
Application Toolbar with Mass Processing Functions
You can define that an application toolbar, with selected mass processing functions, is displayed in the list of the selected objects. You can use this application toolbar to execute the functions in the dialog.
For more information refer to Display Application Toolbar with Mass Processing Functions.
Test Run
You can decide whether changes caused by a mass processing function are executed in the form of a test run only. Error messages that may occur are collected. No changes are updated to the database.
You can use the test run for these functions:
Close
Set/delete user status
Release
Costing
Generate capacity requirements
Technically complete
Scheduling
WM material staging
To test a function, select the option Test function without changes to data on the Mass processing tab page.
Log
Log records are written and saved as a function is being executed. They provide information about the execution of a mass processing function. If no log record exists, the function was executed without any problems. The log records are assigned to the order or the collective order
Regards,
nandha

Mass processing by T.code COOIS

Hi,
How can I execute some mass processing in the T.CODE COOIS and not only reporting.
I canu2019t use u201Csettingsu201D and u201Cmass processingu201D in my system. They are deactived. Do I need some customizing.
Thanks
Dede

Hi Glenn,
Please use COHV - Mass processing by which you can execute the required changes.
COOIS is purely used to collectively get the desired reports for the discrete production process( production orders, etc)
Hope this clears your question.
Thanks & Regards,
Abhijeet Guha

QAC2 in mass processing

Dear Experts,
I know the transaction QAC2 for transfering inspection lot qty from plant to plat or storage location to storage location.
When it is executed for an inspection lot and SL is changed or plant is changed a material document of mvt-323 is generated for each individual posting.
But is there any transaction for mass processing of this activity and to create only one material document for bulk inspection lots.
If any one knows about this, please update ASAP
Regards
Vivek

There is no std SAP T- code available which could process this in Mass .

Mass processing of Workitems in UWL

Hi, Gurus,
i configured UWL for mass processing of decision steps, as shown in this blog - Mass/Batch Processing of Work items in UWL
Now I need to pass some parameters for all selected workitems to workflow container, i need to transfer date to container of each selected wi.
Standard action "submitUserDecisions" working good, and before approval it shows window with 'Are u sure?". I need to replace this window
with own window, where the user can enter the date, and then pass it to container and complete tasks. Is it possible?
I'm not familiar with UWL, an have no idea how to do this...
Maybe I need to add button to view wich starts my WD4Abap application, but how I can pass selected items (items where user select custom attribute - radiobutton) into it? please help....
Thank you.
Regard's,
Mayorov Oleg.

Hi,
Interesting question. I am a bit sceptical about that this would work. I see the following things that you should be able to achieve:
-You need to have your own custom application instead of the standard pop-up (somehow implemented within submitUserDecisions) -> might be difficult/impossible(?)
-You need to add a new container element to the task that will take the date value -> easy
-You should be able to transfer the value entered by the user to the container element -> again I see this difficult. Event with standard "single" user decision you don't have this kind of functionality (well you have an option to use a free text box, but you cannot for example define a date field), so I don't understand how SAP would support something like that with this mass approval functionality.
Not much help, but at least something. Maybe I would start investigating that what happens when you press the mass approval button (probably some function module is executed). Finally I guess that you should somehow be able to build your custom action & action handler, and when you would press that, a web dynpro application would pop-up, etc. I am not sure whether this is even possible. I hope someone else will have better ideas.
Regards,
Karri

How do i skip process validations and still update the model?

how do i skip process validations and still update the model? This has got to be a bug or a really huge design flaw. And no I don't want to using 'binding' to bind to every component on my form just so I can set its value. I just want to use value binding.
Perhaps there should be a FacesContext.getCurrentInstance().updateModel() method?

how about if I want clear the form or load a new model:
<h:commandButton action="#{customer.clear_action}" immediate="true" value="clear" />
<h:commandButton action="#{customer.load_action}" immediate="true" value="load" />
public void clear_action() {
Customer c = new Customer();
this.setBean("customerModel",c);
FacesContext context = FacesContext.getCurrentInstance();
context.renderResponse();
public void load_action() {
Customer c = new Customer(1000);
this.setBean("customerModel",c);
FacesContext context = FacesContext.getCurrentInstance();
context.renderResponse();

How do I check for null parameters in Process Validations?

I am trying to create a Unit Test that validates that a record has been inserted into a table. However I am having problems when dealing with null parameters.
I created a simple table and insert procedure:
create table TEST_TAB (
A varchar2 (30) not null,
B varchar2 (30));
create or replace procedure TEST_TAB_INS (P_A in varchar2, P_B in varchar2) is
begin
insert into TEST_TAB values (P_A, P_B);
end;
Then I created a Unit Test with two implementations:
The first executes TEST_TAB_INS ('One', 'Two')
The second executes TEST_TAB_INS ('One', null)
I attached the following Query Returning Rows Process Validation to both implementations:
select *
from TEST_TAB
where A = '{P_A}'
and (B = '{P_B}' or '{P_B}' is null)
This should allow for the case where P_B is null. However the second test fails with a "Query check returned no rows" error.
I've tried altering the test to use nvl, but get the same results:
select *
from TEST_TAB
where A = '{P_A}'
and (B = '{P_B}' or nvl ('{P_B}', 'XXXX') = 'XXXX')
However, the following test succeeds:
select *
from TEST_TAB
where A = '{P_A}'
and (B = '{P_B}' or nvl ('{P_B}', 'XXXX') = '{P_B}')
Which suggests that null parameters are not being treated as nulls in Process Validations

I've found a way to solve this. By changing the test to:
select *
from TEST_TAB
where A = '{P_A}'
and (B = '{P_B}' or '{P_B}' = 'NULL')
I am able to get both to get both implementations to succeed.
Edited by: AJMiller on Dec 28, 2012 4:24 AM

ORA-01403 - No Data Found - Error processing validation

Dear all
I hope to find a solution for this error.
ORA-01403 - No Data Found - Error processing validation
Best Regards

Dear Patrick,
Thank you for your response.
I solved or worked around the problem by adding exception handling lines to the end of all PL/SQL validation functions used in this page
For example, if a function used in equation, it is not allowed to return null so I made it return 0 in case of exceptions (as in below code)
-- NO_DATA_FOUND is ORA-01403
EXCEPTION
WHEN NO_DATA_FOUND THEN return(0);
Sincerely Yours
Mahmoud Rabie

Mass Processing pop up in BI 7.0

Dear Experts,
I am getting popup window "mass processing" while doing status not ok(RED) for some delta loads in monitor screen(Before going for Repeat delta)
Here it is asking for :
" 2 Infoproviders still have to be checked ?
Interactive or Automatic (without asking for confirmation)?
Which option i need to select ? What is Interactive & Automatic ? I haven't seen this popup earlier. What could be the reason for this popup screen ? Please suggest how to proceed in this case .
Thanks & Regards,
Pcrao.

Hi,
One option I thought of, but never applied in practice. Create an excel with all the field related information in the structure of table,
RSDIOBJ Directory of all InfoObjects
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
*RSKYF Key Figures
RSDTIM Time Characteristics
RSDUNI Units*
And upload this table with the flat using function module etc.
But then you would need to update below tables to with relevant details.
RSDIOBJT Texts of InfoObjects
RSDIOBJ Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
RSDATRNAV Navigation Attributes
RSDATRNAVT Navigation Attributes
RSDBCHATR Master Data Attributes
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA Characteristics Catalog
RSDDPA Data Package Characteristic
RSDIOBJCMP Dependencies of InfoObjects
RSKYF Key Figures
RSDTIM Time Characteristics
RSDUNI Units
Edited by: Parth Kulkarni on Jun 22, 2011 4:56 PM

Mass processing of Workorders-Reg

Hi,
We are having standard Tcode COHV for mass Processing of Production Order.
Like that do we have any tcode for mass processing of Workorder.
The reason behind is instead of having CO99 for closing the order with only one plant(my requirement is multiple plants and multiple order types) ,Is it possible to use IW38 in Background to change the order from TECO to CLSD.
Because the option is given in IW38(Menu- Program-Execute in Background).If so how to do that?
Pl throw some light on this.
Regards
KRISHNAN

Krishnan,
In my 4.7 A&D IS system, we don't even have a menu path starting with Program in IW72 or
IW38 (Menu- Program-Execute in Background).
Only Order > Completion > Complete business, but these programs are designed to release, TECO etc all from within the transaction.
Additionally, you are not restricted to one plant and one order type in CO99. You can leave these open, you are then only restricted by one Controlling Area.
Problem with that is that you are not restricted to PM orders, all order types are processed.
If you are using PM task lists in all your orders, that may work for you as a selection criteria, but that's an unlikely case.
If not, you should be able to reach an agreement with all internal order type users that all orders should be (financially) closed after n days in state of TECO.
Most companies are keen not to leave any 'finished' orders open and available to financial postings.
The usual late postings are differences in invoices and purchase orders. If there are a lot of these it is practical to wait a number of days and then close.
The errors that occur afterwards can always be processed by reversing the closure.

Problem in COHV with mass processing function Release.

Hello,Guru's
I have problem in COHV with mass processing function Release.
even after execution of COHV the status of Orders remains unchanged.i.e. remain Created instead of Release
My user require all Orders should release in mass process
with material availability Check .
and OPJK setting is
material availability
Check availability during order release=X
Release material = 1(User decides on release if parts are missing)

> with material availability Check .
> and OPJK setting is
> material availability
> Check availability during order release=X
> Release material = 1(User decides on release if parts are missing)
Hi,
With these two settings in OPJK, there will not be any impact on COHV.
Any dates, date ranges you are inputing in the COHV.
Try with Manually inputing some of the Orders in COHV and in the Foreground you try.
Afterwards, try with Some selected Orders in the Background..
You may get the clue for the problem..
Regards,
Siva

Process validation doesn't work

Hi,
when I try to change a process on my application (APEX 3.0.1.00.07), the process validation doesn't work, although the checkbox "Do not validate PL/SQL code (parse PL/SQL code at runtime only)" is not checked.
The process will be validate only once on create, but not on change. I think, it's a bug

Yes, that has been noted, thanks.
Scott

BUG: Unit Testing Process Validations SQL editor - extra spaces appended

There is a bug in the SQL editor used by Unit Testing Process Validations.
To re-create:
Create a Validation with some multi-line SQL and save:
select *
from DUAL
where 1=1
Click on a different Validation, and then click back onto the Validation just created. SQL Developer will have appended a space to all the lines except the last one. Edit the Validation and save:
select *
from DUAL
where 1=2
When you navigate to a different validation and back, SQL Developer will have appended an extra space to each line. This can be repeated - each time an extra space will be added.

There is a bug in the SQL editor used by Unit Testing Process Validations.
To re-create:
Create a Validation with some multi-line SQL and save:
select *
from DUAL
where 1=1
Click on a different Validation, and then click back onto the Validation just created. SQL Developer will have appended a space to all the lines except the last one. Edit the Validation and save:
select *
from DUAL
where 1=2
When you navigate to a different validation and back, SQL Developer will have appended an extra space to each line. This can be repeated - each time an extra space will be added.

Very brief about SD process

Hi Experts...
iam wrking as technical consultant..could please send me a document or link whick expalins very brief about SD process( i dont require pdf explain bout the full process). i need simple document which explains about SD process, masterdata,transactional data.
your help is rewarded.
regards
srini

Hi Srinivas Vancha,
Pl go thr below links:
Check these links which can help you, to strength your SD knowledge
http://help.sap.com/saphelp_47x200/helpdata/en/06/57683801b5c412e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm
http://sap-img.com/sap-sd.htm
http://planetsap.com/logictics_SD_main_page.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDSLS/SDSLS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sap-img.com/sap-sd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Reward if it helps
Regards
Srini

About Mass processing/Collective Processing Validation

Similar Messages

Maybe you are looking for