About max local MAC filtering can be register in WLC 2504 and 5508

Hi all
My customer is considering to use WLC with MAC filtering feature (use local database not external Radius). So they are concerning about maximum local MAC filtering entries that can be register on WLC2504 and WLC5508 to buy (the number of APs is about 20, but the MAC is more than 200)
I tried to search, but I could not find any specs mention it. If anyone knows, please help to answer
Rgds

I looked at this before. I want to say its maxed at 2048 regardless of the model ..
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/91901-mac-filters-wlcs-config.html

Similar Messages

  • I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

  • Can I register iphone 6 plus and apple care+ in another country?

    I am located in Australia, and I received a gift - iPhone 6 plus purchased in Singapore. Can I register the phone and upgrade the apple care in Australia? Do I receive the same support offered in Australia?

    You're welcome. The iPhone has never had an international warranty because of regional band requirements. Also, remember that if it needs to be sent back, you cannot send directly to Apple, as they will not accept international shipments for service. It would have to be as I stated earlier. That phone may not support your local LTE bands either. Good luck.

  • LWAP 1231G can't join an WLC 2504 , Unsupported!!

    Dear All,
    I have WLC 2504 with  7.2.103.0 software version , & 2 different LWAP 1262n & 1231G with "c1200-rcvk9w8-mx.124-21a.JA" Image.
    The 1262n is joined to the to the controller and working fine but the 1231G it cann't join the controller , the controller says "Join request received from an unsupported AP" !!
    i will attaches the logs for this AP.
    please can any one help.

    If you want to use 1230, then the "highest" WLC version you can run is the 7.0.235.3.
    It says so in the Release Notes under the heading Software Release Support for Access Points, Table 1-1.

  • I am trying to play my digital music off a hard drive onto my home stereo.  I would like to know if the mac mini can just hook to my processor and play music through the processor(preamp) on my home stereo speakers?

    I currently have a nice home stereo component system.  I also have a 500 GB external hard drive loaded with music.  I am looking for a way to play the music off this Hard Drive onto my home stereo system.  I currently have a WD home entertainment box that I can play movies that I download off the Internet on my TV, of course piped through my home stereo for the sound.  I would like to know if the mac-mini could be used in this form also.  Just have the HD hooked to it, the TV would become my monitor and the mac mini would play the music ... RANDOMLY ... with the use of iTunes.  This of course would be hooked up to the home system with an hdmi cable and the HD hooked up through a USB connection.
    Just would like to know if this could work?

    Yes. Is the short answer.
    You can directly connect the speaker out port of the Mac mini to an input on the AV Receiver which then feeds your speakers. This would be an audio only solution. If you use a TOS-Link connection this will be a pure digital connection ensuring the best quality (important for audiophiles).
    You can if you wish connect the video from the Mac mini to the AV Receiver, and if you have a Mac mini with HDMI or a Mini Displayport you can run the audio and video via a single cable. (Older models would use two cables, the aforementioned TOS-Link pus a DVI to HDMI cable.)
    If you do connect the video output from the Mac to the AV Receiver you can then display this on your TV, and have as one possibility iTunes displayed with perhaps one of the iTunes visualisers playing along with the music. Another possibility would be to use FrontRow on the Mac.
    A different approach would be to have the Mac mini stream over a network to a device e.g. the Sonos Zoneplayer which is then connected to the AV Receiver. An AirPort Express is also able to do this.

  • My Mac PowerPC can't run 7.0.1 and I can't find a earlier version to download

    I have a Mac Power PC with 10.5.8 OS on it and this last updated to Firefox 7.0.1 won't run except on with an intel processor. There should have been a safeguard so it wouldn't updated, now I can't find an older version to download. I access my medical stuff thru Firefox only and now I'm screwed. Am disabled and I can't go buy a new computer. Can anyone get me to a working link for the earlier version, I think it 6.0.2, have been thru so many sites I'm not sure. I really need some help here.

    I have been using the unofficial port of FF for 10.4 and 10.5 PPC called TenFourFox on my old G4 Quicksilver running 10.4 for a while now, they are up to date with FF7, but since 6.0 they have blocked the Flash plugin since Adobe dropped PPC support several releases ago and it has many "never going to be fixed" security holes, though WebM video plays ok. http://www.tenfourfox.com/
    Dev blog: http://tenfourfox.blogspot.com/
    Just join the Youtube the HTML5 beta https://www.youtube.com/html5
    And add marinos35's Youtube WebM search plugin http://mycroft.mozdev.org/search-engines.html?name=Youtube+WebM

  • HT3258 after   transferring data from old mac to new mac, I can't see the transfer files and application on new mac.?

    How can I see the      data and application that I transferred from Old Mac to New Mac?
    Transfer of all the files and application was successful but I can't see it on the New Mac.
    Help.

    Thanks for your reply
    I did reboot the system.
    still can't see new user.
    One thing though when the system finished transferring the files
    at the end a message came up
    " 2013-09-11 04:18:05 +0000 Paul Nirwan could not be created.
    I did the transfer two times, same thing. first time I used the WiFi
    and second time from my back up disk with USB connection, using Migration Assistant.
    Second time also said that Paul'Mac already exist, Paul'Mac 2 created.
    How can I get rid of first data trasnferred?
    It will be using too much space on hard drive if Ileave it therre.

  • Apple Mac store can't connect to the Internet and download applications, please help.

    I need a help on how to repair or re-download Apple Mac store on my Phone.
    It can't download even when connected to the internet.
    All other Apps are working and OK.

    Try resetting your iPhone.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that didn't help, tap Settings > General > Reset > Reset All Settings
    See if that makes a difference.

  • Heloo how can i register new nokia asher and delet...

    i need help i need to register my nokia asher201on my nokia account i have my old nokia C2 and i cant download yahoo messenger please can someone help

    Hi Taylor3d,
    In order to add a domain to your site, please refer to the following document for instructions: http://helpx.adobe.com/business-catalyst/partner/going-live-guide.html. To summarize, once the site is live, simply add your domain to your site via the admin console > Site Settings > Site Domains > New Domain. At your registrar where you purchased the domain, you will need to update the nameservers to the ones listed in the article I've just provided.
    In regards to using Business Catalyst for hosting email, you will need to upgrade to the webBasics+ plan. To do this, within the admin console navigate to Site Settings > Site Management, and the ability to upgrade will be present. Once your site has been upgraded to this plan, you will be able to add email accounts via Site Settings > Email Accounts.

  • Is there some DVD software available on the Mac that can be played universally across Windows and DVD players?

    I am struggling to play DVD slideshows on other windows computers and DVD players?
    Thanks
    Toni

    As far as Windows computers they must have software that can play commercial DVDs. 
    What you can do to improve the compatibility of your iDVD disks is to follow this workflow to help ensure the best quality final product:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I can't register my product: Design and web premium CS6

    I installed Design and web premium CS6 today. I started a program and then I got the message that I had to register, but the links shown didn't work... I registered via adobe product registration page but now I still get these wornings every time I start a program. What do I have to do to get my product registerred?

    Aaltje-Marie Creative Suite 6 is registered when you activate your software.  Please see http://forums.adobe.com/message/3987968#3987968?promoid=KBHJW for information on how to verify the serial number has been registered under your account at http://www.adobe.com/.

  • How many APs Can I join a WLC 4402 and WiSM?

    I have a WLC with 20 APs joined into the same management VLAN and
    I'll deploy other campus with 240 APs and 2 WiSMs Blade.
    Is there any recomendation about how many APs Can I put on the same management VLAN?
    thanks a lot

    Cisco recommends 60 - 100 access points per vlan. Attached is the best pratices document
    https://cisco.hosted.jivesoftware.com/docs/DOC-4204

  • 1552E MAC Filtering Question

    I have a number of  1552e APs connected to a 5508 WLC.  We are using local MAC filtering to enable  the 1552's to connect to the WLC.
    I have a several more 5508's in different locations, and can be used for back-up in the event the primary WLC fails.
    I have the primary WLC, a secondary WLC and a tertiary WLC loaded into each the 1552's HA tab.
    My question concerns the secondary and tertiary WLCs... do I have to load all the MAC addresses in each of those as well in order for the 1552's to connect  ?
    If yes, is there an easy way to copy the local mac filtering from the primary WLC and load it into the other WLCs ?
    If not, that's a lot of typing 

    Dennis,
    No your license is your license and doesnt impact MAC address. BUT, what you should know you have a limit as to how many mac addresses a controller can use. See my blog post on the subject
    http://www.my80211.com/cisco-wlc-cli-commands/2009/12/27/configure-local-mac-authentication-on-cisco-wlcs.html
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
    ‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

  • I can not register my old version CS on my new Windows 7 computer

    I had this version CS since I took a class at the local coollege. Then I had Windows XP.  Now I have Windows 7 in a new machine. The windows program includes the ability to run OLD program for Windos XP on this Win 7. Howeve,r I can not register the product automatically and by phone there is no help. The program will run OK but I only have 28 days before it stops working.  HELP

    I don't know if you can use the special version of CS2.  Apparently you need to follow the instructions very carefully.
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • AP1121 can'T join WLC 2504

    Hi there,
    It's me again... same devices which making trouble.
    I have an allready configured WLC 2504 running in the network. Every LAP i add to the network joins imidiatly to the Controller.
    But not the AP1121G AP.
    It fails the Handshake everytime and the Controller shows me an failmessage at the statistics in the GUI.
    GUI Message:
    RADIUS authorization is pending for the AP
    CLI Debug:
    *spamApTask0: May 23 17:29:18.258: 00:11:20:6e:2b:14 Allocated index from main list, Index: 16
    *spamApTask0: May 23 17:29:18.259: 00:11:20:6e:2b:14 DTLS keys for Control Plane are plumbed successfully for AP 192.168.1.100. Index 17
    *spamApTask0: May 23 17:29:18.259: 00:11:20:6e:2b:14 DTLS Session established server (192.168.1.10:5246), client (192.168.1.100:1716)
    *spamApTask0: May 23 17:29:18.260: 00:11:20:6e:2b:14 Starting wait join timer for AP: 192.168.1.100:1716
    *spamApTask0: May 23 17:29:18.263: 00:11:20:6e:2b:14 Join Request from 192.168.1.100:1716
    *spamApTask0: May 23 17:29:18.264: 00:11:20:6e:2b:14 Deleting AP entry 192.168.1.100:1716 from temporary database.
    *spamApTask0: May 23 17:29:18.264: 00:11:20:6e:2b:14 AP with same name AP0011.206e.2b14 exist. Using default name AP0011.206e.2b14 for this AP.
    *spamApTask0: May 23 17:29:18.265: 00:11:20:6e:2b:14 In AAA state 'Idle' for AP 00:11:20:6e:2b:14
    *spamApTask0: May 23 17:29:18.266: 00:11:20:6e:2b:14 State machine handler: Failed to process  msg type = 3 state = 0 from 192.168.1.100:1716
    *spamApTask0: May 23 17:29:18.267: 00:11:20:6e:2b:14 Failed to parse CAPWAP packet from 192.168.1.100:1716
    *spamApTask0: May 23 17:29:18.267:
    *spamApTask0: May 23 17:29:18.267: 00:11:20:6e:2b:14 Finding DTLS connection to delete for AP (192.168.1.100/1716)
    *spamApTask0: May 23 17:29:18.268: 00:11:20:6e:2b:14 Disconnecting DTLS Capwap-Ctrl session 0x1458bd60 for AP (192.168.1.100/1716)
    *spamApTask0: May 23 17:29:18.268: 00:11:20:6e:2b:14 CAPWAP State: Dtls tear down
    *spamApTask0: May 23 17:29:18.268: 00:11:20:6e:2b:14 DTLS keys for Control Plane deleted successfully for AP 192.168.1.100
    *spamApTask0: May 23 17:29:18.270: 00:11:20:6e:2b:14 DTLS connection closed event receivedserver (172:16:58:250/5246) client (192.168.1.100/1716)
    *spamApTask0: May 23 17:29:18.270: 00:11:20:6e:2b:14 Entry exists for AP (192.168.1.100/1716)
    *spamApTask0: May 23 17:29:18.272: 00:11:20:6e:2b:14 No AP entry exist in temporary database for 192.168.1.100:1716
    *spamApTask0: May 23 17:29:18.272: 00:11:20:6e:2b:14 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  192.168.1.100:1716)since DTLS session is not established
    *spamApTask0: May 23 17:29:18.277: 00:11:20:6e:2b:14 Received LWAPP JOIN REQUEST from AP 00:11:20:6e:2b:14 to 84:78:ac:b3:73:c0 on port '1'
    *spamApTask0: May 23 17:29:18.278: 00:11:20:6e:2b:14 incomingRadJoinPriority = 1

    Problem solved
    Hey guys, i solved the problem. It wasn't the firmwareversion. I downgraded the WLC and the problem still exists.
    Problem reason: The AP1121G series doesn't  has a MIC - Manufactured Installed Certificate - which is compatible/ accpeted by the WLC 2504 and it's parameters for the RADIUS server. Maybe it has no MIC, i don't know.
    So you need the SSC - Self Signed Certificate - for the join authentication.
    Solution:
    1. Logon to GUI or CLI of the WLC.
    2. Enable "Accpet Self Signed Certificate"
              GUI: Security > AP policy
              CLI: (Cisco Controller) >config auth-list ap-policy ssc enable
    3. Look for the SSC Hash of the AP:
              CLI: (Cisco Controller) >debug CAPWAP events enable
              There you'll find an event which is called e.g.:
         Mon May 22 06:34:14 2006: sshpmGetIssuerHandles: SSC Key Hash is 9e4ddd8dfcdd8458ba7b273fc37284b31a384eb9
    4.Add the ap manually to the controller
              GUI Security> AP policy > Add               There you have to set the right parameters, ap MAC, Cert. type: "SSC"           and the Key.
              CLI:    
              (Cisco Controller) >config auth-list add ssc 00:0e:84:32:04:f09e4ddd8dfcdd8458ba7b273fc37284b31a384eb9
    5. Maybe you should reboot the ap.
    And it's done

Maybe you are looking for