About mobile network interface!

HI,
who will provide the support for the interface of mobile network and what are these interfaces ?
Thanks.

I am not sure if Vendor: Marvel is good! Why not it is Apple?

Similar Messages

  • Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

    Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

    Oh well that's what I heard because it's about the 90 days warranty ,,. Anyway can you please tell me what I can do to get it fixed ? It's a not really big crack in the right bottom side of the screen

  • Unable to access Internet using a Mobile Network

    Hello friends
    I recently updated my SE Xperia mini pro 17i (2011 model) to ICS, initially there were some issues and I had to re-update it to finally get authentic interface of ICS. Even after the successful update I am unable to use the mobile network to access Internet, the only way  is to use a Wifi instead. Can somebody please help me out with this issue?
    Karan

    The first thing I would advise doing is contacting your current network provider and have them send you through the relevant internet settings.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Lost Mobile Network After upgrade to Win 10

    Hi, any thoghts on an issue on 2nd gen X1 (3460-2SG) that after Win 10 upgrade lost Mobile Network but has WiFi OK?Looked for updated drivers but found none...Looked in "Mobile accsses" tool in previous profiles i had, and it states  "device is not found" in front of the H5321 gw Mobile broadband driver Any help will be much appreciated

    Hi ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

  • Mobile network problem in my lumia 520

    Once network gone, I have to Restart it then again mobile network come.calling proble occurs many times even network is dispayed. Network problem sshould be rectify.

    Hi mbkrish,
    Do you experience the network issue regardless of your area? Aside from calling, are the other network services working fine like SMS messaging and mobile data connection? Is this for a Lumia 520 as well? If so, I hope you're using a standard microSIM and not a cut one as this is what the phone is designed to use.
    BTW, the reset that the Nokia Care Center recommended is the one under Settings > about, is that right? After the reset, have you checked if the system apps are updated? Go to Settings > swipe to applications > store > check for updates. 
    Let us know how it will go. 

  • Thunderbolt to Firewire Adapter & New Network Interface Message

    I am using the new Thunderbolt to Firewire Adapter. Why is it that every time I use it, I get the following message:
    "A new network interface has been detected. The Thunderbolt FireWire Slot 2 network interface has not been set up. To set up this interface, use network preferences."
    All I want to do is mount external hard drives that don't have Thunderbolt ports to my iMac, via Thunderbolt because I am using the iMac's single Firewire port for something else. The drives do successfully mount, but why do I keep getting this message whenever I connect them again?

    I have no doubt what you say to do would get rid of the message for me. However, both myself and an Apple Store employee think it is odd that the message comes up in the first place. We're both curious about it, and he's going to look into it.
    We tested it on a computer at the store, and found that it happens on Lion too.

  • S860 and X2, Google not connecting on mobile network.

    I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils

    Hi Ragge
    Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
    ''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
    The S820 has been relesed in May 2013.
    ''Tried to reverse OS a few steps back...''
    How did you do that?.
    Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • S820 and X2 Mobile Network connection

    Hi, I have two Lenovo Smartphones S820 and X2. I had my S820 for a couple of years and it has been working fine until september 2014 when mobile network started to act up, sometimes it worked and sometimes not. Google maps and a few apps worked all the time. Hotspot was and is still working so there is not a problem with my connection to my mobile network. I dont remember if if it was about that time (september) we got the update with new security. Anyway this year i bought a X2 and found out that it is the same with this one. I have put network speed in notifications and i can see that it is sending/recieving but the apps says no connection. Still on X2 google maps and a few apps is working. One app that i have is "myMail" and this is working as far as downloading the messages text but no pictures. Same still if i start hotspot on one of them i can access internet thru this on the other one.
    When is the next version of Android comming for X2? And will it still have the Security app?
    It feels like thet is one of the problems.
    Regards Ragge

    Hi, I have two Lenovo Smartphones S820 and X2. I had my S820 for a couple of years and it has been working fine until september 2014 when mobile network started to act up, sometimes it worked and sometimes not. Google maps and a few apps worked all the time. Hotspot was and is still working so there is not a problem with my connection to my mobile network. I dont remember if if it was about that time (september) we got the update with new security. Anyway this year i bought a X2 and found out that it is the same with this one. I have put network speed in notifications and i can see that it is sending/recieving but the apps says no connection. Still on X2 google maps and a few apps is working. One app that i have is "myMail" and this is working as far as downloading the messages text but no pictures. Same still if i start hotspot on one of them i can access internet thru this on the other one.
    When is the next version of Android comming for X2? And will it still have the Security app?
    It feels like thet is one of the problems.
    Regards Ragge

  • How to add a new network interface adapter?

    Hello,
    I followed this tutorial (http://www.oracle.com/technology/obe/ovm/ovmel5pvmdb11gr1/ovmel5pvmdb11gr1.htm) to set up a paravirtualized Oracle Enterprise Linux Version 5 VM on Oracle VM Server. It works fine, however I wish to add another network interface adapter (or NIC) to it, however when I try to import into Oracle VM Manager I get the following error:
    "OVM-5004 Invalid virtual machine config file. -"
    I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). I figured since I could access the machine OK I wouldn't worry about importing it into VM Manager, so my question is, is there a way to set up the Network Interface Adapter through the command line on the VM Server (similar to how it was setup)? Or should I try and fix the "invalid virtual machine config file" error so I can import it into VM Manager and then add the extra Network Interface Adapter?
    Thanks in advance,
    Michael.

    user10862036 wrote:
    I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). The vm.cfg file would be found in /OVS/running_pool/<vm_name>/ -- the default vm.cfg that ships with the template should successfully import into Oracle VM Manager. Once you have the image imported, you can use Oracle VM Manager to add an additional NIC to the VM.

  • [SOLVED] Network interface name keeps changing

    My network interface name keeps changing between wlp2s0 and wlan0. This is a real pain, since I never know what name will be generated at boot. Most of the time it's called wlp2s0, so this is what netctl is set up to handle by itself. At boots were wlan0 is generated I have to connect manually.
    I've tried making the name static by adding a rule to the /etc/udev/rules.d/10-network.rules. The rule i added was:
    SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="48:5d:60:7e:64:e9", NAME="wlp2s0"
    Wlp2s0 is generated at boot alright, but I still have to connect manually with this solution. As if the "new" wlp2s0 is not recognized as the old one (same MAC). What gives?
    This is on an Asus Eee 1001PXD, with the Qualcomm Atheros AR9285.
    Last edited by madr (2013-05-18 20:09:34)

    I've now been able to replicate the issue, and run the command:
    journalctl -b
    I did find the output:
    mai 18 02:30:02 <hostname> systemd-udevd[126]: error changing net interface name wlan0 to wlp2s0: Device or resource busy
    I haven't been able to process the whole output yet (I'll continue tomorrow if necessary), but I've found some things that I hope will clearify things. I get similar outputs to the following a lot throughout:
    mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: carrier lost
    mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: waiting for carrier
    mai 18 02:30:04 <hostname> systemd[1]: [email protected]: control process exited, code=exited status=1
    mai 18 02:30:04 <hostname> systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
    mai 18 02:30:04 <hostname> systemd[1]: Unit [email protected] entered failed state.
    mai 18 02:30:04 <hostname> systemd[1]: Starting Network.
    mai 18 02:30:04 <hostname> systemd[1]: Reached target Network.
    EDIT:
    I see now that this is later in time, so that's not so strange after all. I'll look some more.
    EDIT2:
    The error code that a name change i impossible is the first time the term 'wlan0' occurs in the log. However there's a line much earlier that talks about wlp2s0:
    mai 18 02:29:59 <hostname> systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s0.device...
    But as I said, if this information doesn't help, I'll have a closer look at the output tomorrow. Getting late here in Norway now.
    Last edited by madr (2013-05-18 01:20:50)

  • BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

    I'm trying to create an "ExtraLarge" VM with multiple NICs.  The New-AzureVM returns the following error:
    BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
    interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
    cannot be updated to have secondary network interfaces and vice-versa.
    But I have no other VMs.  Or at least I did and then deleted them and all their disks.  The service has no deployments (either staging or production).
    Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
    I have tried many things to fix this, including the deletion of ALL of my resources.  I have deleted and created the service many times, both with an affinity group and without.  I have a screen print of the -debug output if your interested.
    Thanks for the outstanding help.

    Hi Ron,
    IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
    Please send an email with your contact details to my email
    [email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
    I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
    Ref:
    http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
    http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
    If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
    Regards,
    Girish

  • 8320 no mobile network

    I have problem with network, actually, there's no any mobile network on my pfone, I tried with several sims... Not even sos call coverage... It's not about the software, i have update it. And, of course, the radio is turned on. If someone has a solution of any kind, please, write, it's a good phone, and I just don't wanna trow it away. Or any kind of electric sheme, it would be very helpful...

    Hello .
    Thanks for coming to the community I can understand this is very frustrating.
    I have checked the area, and can see for the past 3 days we have a mast causing problems.
    Our engineers are working on getting this resolved as fast as possible.
    Apologies for this.

  • MOBILE NETWORK OFF

      Hi I have a problem with my 9550 it works fine but the mobile network only goes for about a minute and then goes OFF y wipe the phone install the new software and the problem still there. anyone knows what to do ?????

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, does the proplem persist? If not, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    If the problem does persist in SAFE mode, then you may have deeper issues going on...and you may want to consider reloading your OS clean.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • [SOLVED] Network interface enp2s0 no longer detected

    Hello,
    Yesterday after rebooting, right after Grub, systemd-fsck does its stuff (clearing blocks, etc...) then nothing.
    After a quick research I've found that removing "quiet" from the Grub command line would allow more messages to be displayed, which was quite helpful.
    This is in fact not a partition mounting problem, here is what I have:
    [ OK ] Started Accounts Service.
    [ TIME ] Time out waiting for device sys-subsytem-net-devices-enp2s0.device
    [ DEPEND ] Dependency failed for dhcpcd on enp2s0.
    [ OK ] Reached target Multi-User System.
    [ OK ] Reached target Graphical Interface.
    I obviously have a networking problem (and probably a "Graphical Interface" or Nvidia related thing problem), so I log in another console, and after doing ip link list, I only have the loopback listed, no enp2s0 or WiFi interface, for some reason they are no longer detected.
    I've run the live version of Arch to mount and arch-chroot my partitions, not to mention my network interfaces are detected and I can upgrade things with pacman, I've tried to disable dhcpcd on enp2s0 to avoid the time out thing, and while I can say it does what it's supposed to do, it doesn't solve anything anyway since I'm still stuck at Reached target Graphical Interface. (and don't have any network access, to state the obvious).
    I've even thought about a Kernel/Driver problem after an update, but I'm not sure, any idea or some log I can have a look at ?
    Thank you for your time.
    Last edited by Blaxar (2013-06-25 18:35:50)

    Thank for the tip, I've just had a look at pacman.log:
    [2013-06-23 11:07] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 11:07] [PACMAN] synchronizing package lists
    [2013-06-23 11:08] [PACMAN] starting full system upgrade
    [2013-06-23 11:10] [PACMAN] upgraded automake (1.13.2-1 -> 1.13.4-1)
    [2013-06-23 11:10] [PACMAN] upgraded ca-certificates (20130119-2 -> 20130610-1)
    [2013-06-23 11:10] [PACMAN] upgraded cantarell-fonts (0.0.12-1 -> 0.0.13-1)
    [2013-06-23 11:10] [PACMAN] upgraded cloog (0.18.0-1 -> 0.18.0-2)
    [2013-06-23 11:10] [PACMAN] upgraded libcups (1.6.2-2 -> 1.6.2-3)
    [2013-06-23 11:10] [PACMAN] upgraded cups (1.6.2-2 -> 1.6.2-3)
    [2013-06-23 11:10] [PACMAN] upgraded e2fsprogs (1.42.7-2 -> 1.42.8-1)
    [2013-06-23 11:10] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
    [2013-06-23 11:10] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
    [2013-06-23 11:10] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.2.2-1 -> 3.8.3-1)
    [2013-06-23 11:10] [PACMAN] upgraded gzip (1.5-3 -> 1.6-1)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-e2fsprogs (1.42.7-1 -> 1.42.8-1)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-glib2 (2.36.2-1 -> 2.36.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
    [2013-06-23 11:10] [PACMAN] upgraded libxi (1.7.1-1 -> 1.7.1-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-libxi (1.7.1-1 -> 1.7.1-2)
    [2013-06-23 11:10] [PACMAN] upgraded mesa (9.1.3-1 -> 9.1.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-mesa (9.1.3-2 -> 9.1.3-3)
    [2013-06-23 11:10] [PACMAN] upgraded libbsd (0.5.2-1 -> 0.5.2-2)
    [2013-06-23 11:10] [PACMAN] upgraded libltdl (2.4.2-9 -> 2.4.2-10)
    [2013-06-23 11:10] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
    [2013-06-23 11:10] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
    [2013-06-23 11:10] [PACMAN] upgraded libpeas (1.8.0-2 -> 1.8.1-1)
    [2013-06-23 11:10] [PACMAN] upgraded libqmi (1.2.0-2 -> 1.4.0-1)
    [2013-06-23 11:10] [PACMAN] upgraded libreoffice-uk (4.0.3-1 -> 4.0.4-1)
    [2013-06-23 11:10] [PACMAN] upgraded libtool (2.4.2-9 -> 2.4.2-10)
    [2013-06-23 11:10] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
    [2013-06-23 11:10] [PACMAN] upgraded libxv (1.0.8-1 -> 1.0.9-1)
    [2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-06-23 11:11] [PACMAN] upgraded linux (3.9.6-1 -> 3.9.7-1)
    [2013-06-23 11:11] [PACMAN] upgraded logrotate (3.8.4-2 -> 3.8.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
    [2013-06-23 11:11] [PACMAN] upgraded nvidia (319.23-2 -> 319.23-3)
    [2013-06-23 11:11] [PACMAN] upgraded openresolv (3.5.4-3 -> 3.5.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded pacman (4.1.1-1 -> 4.1.2-1)
    [2013-06-23 11:11] [PACMAN] upgraded poppler (0.22.4-1 -> 0.22.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded poppler-glib (0.22.4-1 -> 0.22.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded ppp (2.4.5-7 -> 2.4.5-8)
    [2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice-fr'
    [2013-06-23 11:13] [PACMAN] installed libreoffice-fr (4.0.4-1)
    [2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice'
    [2013-06-23 11:15] [PACMAN] installed raptor (2.0.9-2)
    [2013-06-23 11:15] [PACMAN] installed rasqal (1:0.9.30-1)
    [2013-06-23 11:15] [PACMAN] installed redland (1:1.0.16-2)
    [2013-06-23 11:15] [PACMAN] installed hyphen (2.8.6-1)
    [2013-06-23 11:15] [PACMAN] installed boost-libs (1.53.0-2)
    [2013-06-23 11:15] [PACMAN] installed clucene (2.3.3.4-6)
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * see https://wiki.archlinux.org/index.php/LibreOffice
    [2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
    [2013-06-23 11:15] [ALPM-SCRIPTLET] LibreOffice has been split into several packages:
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-common
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{gnome,kde4} - desktop integration plugins
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
    [2013-06-23 11:15] [ALPM-SCRIPTLET] the LibreOffice APIs and for creating
    [2013-06-23 11:15] [ALPM-SCRIPTLET] extensions (UNO components).
    [2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * you need to install at least one libreoffice-langpack
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * you may want to pacman -Ss libreoffice-extensions
    [2013-06-23 11:15] [ALPM-SCRIPTLET] to see what additional extensions are prepared to install
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
    [2013-06-23 11:15] [ALPM-SCRIPTLET] for spell checking
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * make sure you have installed some ttf font (ttf-dejavu recommended)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-common (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-base (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed lpsolve (5.5.2.0-2)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-calc (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-draw (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-gnome (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-impress (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-math (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libwpd (0.9.6-1)
    [2013-06-23 11:15] [PACMAN] installed libwps (0.2.9-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-writer (4.0.4-1)
    [2013-06-23 19:57] [PACMAN] Running 'pacman -S ssh-key'
    [2013-06-23 23:01] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 23:01] [PACMAN] synchronizing package lists
    --From the live CD from now on--
    [2013-06-23 23:29] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 23:29] [PACMAN] synchronizing package lists
    [2013-06-23 23:30] [PACMAN] starting full system upgrade
    [2013-06-23 23:32] [PACMAN] removed grub-bios (2.00-2)
    [2013-06-23 23:32] [PACMAN] removed grub-common (2.00-2)
    [2013-06-23 23:32] [ALPM-SCRIPTLET] Generating grub.cfg.example config file...
    [2013-06-23 23:32] [ALPM-SCRIPTLET] This may fail on some machines running a custom kernel.
    [2013-06-23 23:32] [ALPM-SCRIPTLET] done.
    [2013-06-23 23:32] [PACMAN] installed grub (2.00-1)
    [2013-06-23 23:32] [PACMAN] upgraded lib32-libjpeg-turbo (1.3.0-2 -> 1.3.0-3)
    [2013-06-23 23:32] [PACMAN] upgraded libgsf (1.14.26-1 -> 1.14.27-1)
    [2013-06-23 23:32] [PACMAN] upgraded libquvi-scripts (0.4.15-1 -> 0.4.16-1)
    Among all of that, I've spotted this:
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    Do you think this may explain something ?
    Anyway, from lspci:
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
    00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 06)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    01:00.0 VGA compatible controller: NVIDIA Corporation GT200 [GeForce GTX 260] (rev a1)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
    03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
    04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
    05:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
    ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
    ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
    ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
    ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
    ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
    ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
    ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
    ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
    ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
    ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
    ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
    and ip a:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    Last edited by Blaxar (2013-06-24 20:10:25)

  • I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

    I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for