About My pci driver for solairs sparc

I install my driver "successfully" and no error output , execut command "prtconf " ,output infomation told me that device tree is normal.But when I remove it ,the system halt .if I reboot the system output "ddi_regs_map_setup failed" ,why ?
Thank you

Please click on the below shown link to download and install the driver you are loooking for
http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67016.exe
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GBL84
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

PCI DRIVER FOR MY ALTEC LAPTOP

Hi,
PLease help me by finding the below Hardware IDs PCI Driver for my PC.
PCI\VEN_10EC&DEV_5229&SUBSYS_18FE103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_18FE103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
Thanks in Advance!

Please click on the below shown link to download and install the driver you are loooking for
http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67016.exe
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GBL84
Although I am an HP employee, I am speaking for myself and not for HP

I need guidance on upgrading a PCI driver for my company.

I am trying to update the code we have for our current PCI card. We manufactured this card in house. When I do a fresh install of windows 7 32 bit it will work as intended. After applying all the windows updates nothing seems wrong but you try and shut down
the machine it blue screens and reboot. The PCI card will work with our application fine. Its just something in a windows update that is causing it to blue screen when you try to shut the machine down. Currently this driver isn't digital signed either
lame I now do you think this would be one of the reason?
This driver is in need of a face lift for sure. I am not sure how to go about doing this. I have the source. I need some guidance. I have started reading the resource provided here https://msdn.microsoft.com/en-us/library/windows/hardware/ff554678
I have tried windows 8.1 and it just tells me fail and won't even install... So yeah its time to upgrade this driver. The unfortunate thing is the driver has passed through many developers. Not real guidance on the code or how it was compiled. The
driver also needs to work on 64bit as well.
I appreciate you taking the time to read this.

To get some idea on the blue screen enable the crash dumps for Kernel Memory Dump (under Advanced System Settings under System in the Control Panel). Once you have the dump open it with Windbg and issue a !analyze -v command, if the crash is not obvious
to you post the results to this discussion.
On the driver you may want to consider migrating the driver to KMDF. While this may look like more work it will actually make for a more robust and simpler driver. Take a look at your drivers, IRP_MJ_READ, IRP_MJ_WRITE, and IRP_MJ_DEVICE_CONTROL
this is the code from the current driver that would need to be migrated, the rest of the driver for the most part is pretty standard for any card.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Thunderbolt / USB3 questions about external backup drives for my new MacBook Pro

I have a new MacBook Pro retina 13". It has two USB3 and two Thunderbolt2 ports.
Until now on my iMac I've kept two backups on two WD USB2 drives. I have never had any problems with any of my WD Passport drives. One for Time Machine and one for CCC (a complete bootable clone incrementally created at 3:30 am every day).
I'd like to get new portable drives for my MBP for these backups going forward and have a few very basic questions, since this is the first time to have a device with a USB3 port, and the first time I even heard about Thunderbolt.
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
Is it common for drives to have both Thunderbolt and USB2 connections?
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Is USB3 like USB2 in that if you have even 1 USB2 device (e.g. my Logitech headset) connected to a USB3 hub it will slow down everything on that hub to USB2?
Any recommendations for good, portable backup drives?
Thanks,
Doug

Hi Doug,
Lets see if we can address some of these:
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
USB3 is "backwards compatible" with USB2 so plugging a USB3 drive into a USB2 port should work, but at USB2 speeds.
Is it common for drives to have both Thunderbolt and USB2 connections?
Drives sold as Thunderbolt often (not always) have USB as well, drives sold as USB never (in my experience) have Thunderbolt connections.
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Yes there are (but don't expect them to be comparable in price to a USB hub) e.g. see here: http://www.belkin.com/uk/p/P-F4U055/
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
I'ts an Apple technology (like firewire) and is far from widely used on peripherals. There ARE Thunderbolt drives etc by companies such as LaCie, WD etc but they are still very expensive (3 or 4x the price of an equivalent sized USB drive). For some this was a worthwhile expense since Thunderbolt is many times faster than USB2. But the arrival of USB3 has, in my opinion, changed the landscape. Yes, Thunderbolt is theoretically faster than USB3 (up to twice as fast) but benchmark tests have shown that in real world situations, the speed difference varies from no difference to Thunderbolt being 25 or 30% faster. When you take into account that USB3 drives are more common than Thunderbolt and are only a little more expensive than USB2 drives at present, then it's a "no brainer" as far as I am concerned.
Hope this helps.
Jon

Question about the Intel driver for the IDE controller

Greetings to all:
Lenovo has recently published another driver for the IDE controller and I wonder how many of you that have a T60, T60p, T61 and T61p have been able to actually install it.
My controller device is:
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4,
both in XP-SP3 as in Vista SP1, 32bits versions ( see bellow details of my T60p, which has 2 hard drives)
Interestingly enough the driver on each is v:7.0.0.1020 (2005/05/23) for XP and v:6.0.6001.1800 (2006/06/21) for Vista-B. They are working well as far as I see, but now and several times before, I have tried to update them but they do not install. The message is that I have already the best driver. I noticed that the label of the controller is not quite exactly spell out in the instruction text file or the .inf, and the one that comes close, is that of the so call ICH7-M family.
Why is this? There are at least 7 versions discussed in the history. It it perhaps because the one for the ICH7-M family is always the same? System update does not install them either.
Forgive my curiosity but why bother publishing if they can not be installed? Or perhaps somebody has. This is not logical.
Cheers.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.

For those who think I can not follow directions.
First, the driver for the Intel IDE device in a T60p is obviously from Intel. But there are two ways to get it fulfilled.
Lenovo publish the Intel drivers with perhaps there own twists, refinements and in the absence of clear contrary information, that they are perhaps more fine tuned to the machine. It uses the following inf files to have them install: iaahci.inf and iastor.inf. They are revised whenever Lenovo fell is necessary and eventually published.
I must assume they are in use if you have a Vista system originally installed by Lenovo and that is why those inf are the ones you find in the updates.
Mi T60p was purchased 2 years ago with XP-Pro, just before the release of Vista, with the understanding of a free upgrade to Vista-B shall be send when finally released. An Indeed they keep their word and send me a Lenovo branded full version of MS Vista-Business, some 4 months latter (not an image). Rather than upgrade XP-Pro and to avoid the time in limbo and work interruption of the Vista less desirable over XP, I did a successful clean install into a new hard drive, followed by a Lenovo system update, which changed many drivers and installed programs, etc. But as you might imagine, the Intel IDE-SATA driver installed is the one provided by MS (v:6.0.6001.1800 of 2006/06/21), (which uses a different installation file mshdc.inf) and, until proven otherwise, I must assume more generic, since it is for any and all machines, following the standard of the hard drive SATA type.
Talking to Lenovo support for nearly 1 1/2 hours last week, was at least not good for my blood pressure, while attempting to explain the issue and refuting a collections of nonsense from the support tech. Eventually a supervisor assure me that the driver was the same and that it has not change for a long time, as it is the same even for XP. Well, why bother with updates if that is the case? But I see that there are others IDE drivers species for animals such as Dell, or HP, etc. Thus you must accept that there is a strong case for a Lenovo modified Intel driver and thus the updates. Tech support could not answer such question, nor they were able to install version 8.6.0.1007 (date 2008/12/04) of the driver.
I fell the machine is working well, but have nothing to compare with (MS Experience Index 4.3). And as usually happened, sometimes you do not appreciate how sick you are, until you get cure. The question remains about the driver been generic and sufficient or specific and optimal.
Cheers and happy holidays.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

Need ensoniq pci driver for win2

I need driver for my sounblaster(Ensoniq AudioPCI)for installing on win 2003.
cause to ensoniq is "end of Service Life" I need your help.
caution: drivers for win9x winXP & NT were not capable for win 2003 !!

There is no specific driver for that card for Windows2003 Server Edition. There may be some built-in (nati've) drivers you could try though, but I have not tested those cards on that (server) OS.
Cat

Yellow mark in device manager under other devices pci driver for B50 laptop with Windows 8.1 64 bit

Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.

Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Need advise about using NAS drive for TM and other storage

I have 2 macs. One is running Snow Leopard and has a FW 400 drive connected directly to it for TM backups. I have another older mac (G5 PPC) running Tiger and I plan to update to Leopard so I can also do TM backups for it.
So, I'm thinking of getting the following NAS enclosure, adding a 2TB drive to it, so I can do TM backups on the old mac (and maybe switch the other mac to use it too).
The questions I have are:
1. is it fast enough to do it over the network, compared to the direct FW 400 connection?
2. Can I partition the new NAS 2TB in half and move the TM backup folder over there and then tell my new mac that it needs to do the TM backup there?
That's all I have for now. Hope someone can help.
Thank You!

That does not appear to be compatible with Time Machine.
See the pink box in #2 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Info about new sound driver for M70-309

Hi!
one question, the new sound drivers for Satellite M70-309, relased date 25/08/06, are wrong.
They don't work, is a mistake?
Thank You
Ciao!

Hi,
This is a Problem with the new Sound Driver. Tomorrow becomes you a new Update from this Driver of the Toshiba Website.
By

HT3986 Whats about the Wifi driver for win7 on MacBook pro with Retina Display?

Hi guys
I have a MacBook pro with retina display.
I've tried to install win 7 64 bit with boot camp.
Win 7 works but I have now Wifi connection and I can't find any solution
I can't use the automatic search function from win7 because I can't use LAN because I have no LAN connection in this Mac.
So can anybody help me with this problem?

Did you download and install the Windows support software. The first menu option when running Bootcamp Assistant was to download the Windows Support software.
If you did download and install the Windows Support Software and wifi still does not work for you, consult Windows help files for how to set up wifi.

About the JDBC driver for Oracle805

Hello everyone,
I'm using the thin driver to config the JDBC Connection Pool in Weblogic 7.0,
and the
Oracle is 8.0.4. I can config it but it worked well just at the first time. I
get the
Connection from the WLS connection pool as the EJB does. Now both my JDBC code
and the EJB
can not access the database. I doubt if the JDBC driver is the correct version.
regards

For the record, Oracle 8.0.4 is no longer supported. The earliest version supported is now 8.1.7.
Not that this is the problem that you are seeing.
Can you use dbping to test if you can connect to the database?
"Jason Feng" <[email protected]> wrote in message news:3ebf8f2c$[email protected]..
>
Hello everyone,
I'm using the thin driver to config the JDBC Connection Pool in Weblogic 7.0,
and the
Oracle is 8.0.4. I can config it but it worked well just at the first time. I
get the
Connection from the WLS connection pool as the EJB does. Now both my JDBC code
and the EJB
can not access the database. I doubt if the JDBC driver is the correct version.
regards

CD or DVD drives for a sat pro 6000

any one know if i can put a Model number SD-C2302 dvd player in to a sat pro 6000 lab top or no of any that i can put in please?

Hi Adrian,
You are mostly correct in your statement about CD/DVD drives for your notebook. However, it is important that you only buy drives with dimensions similar to your current model.
Generally CD/DVD drives come in two varieties, those destined for tower type installation and those destined for notebooks. The latter are usually designated as 'slim' or 'slimfit'.
To install the new drive you usually need to unscrew and remove any fitting brackets used to anchor your drive to your notebook together with any plastic trim components. These will then need to be attached to your new drive.
Toshiba notebooks use various drives (Toshiba, TEAC, Mat****a, etc.) so you will generally have a reasonably wide variety to choose from.
Finally, you may need to download drivers for your new drive if none are provided or if your purchase an OEM version. These can be obtained from the drive manufacturers web-site.
HTH

Driver for Canon MPC190

I cannot find a print driver for the multi machine (scan/print/copy) Canon Smartbase MPC190 (not on Canon support nor on Apple). Apperantly it doesn't exist. Would there be anybody out there knowing about a developped driver for this, or if any other driver might fit?
I'm using 10.2, 10.3 and 10.4 version on my Mac's (yes, I will upgrade them soon to the same
Thanx all/Pär

EFI have posted an update utility for 10.6. You will see from the release notes on the page that this updater is for EFI print controllers using System 6 architecture or later. I believe the imagePASS-J1 and imagePASS-G1 are both System 7 architecture so this should work for danbolta and sighop.
The update changes permissions on the PS3 folder located in ./Library/Printers/Canon.
Here is the link to the download page.
http://services.efi.com/support/drivers/download2.asp?oem=efi&sys=Applemac_osx106&ver=NA
Pahu

Twist - Bad Driver for WAN Miniport?

Just picked up a new Twist s230u. Under the Device Manager, there is a yellow exclamation point warning about a bad driver for the WAN miniport. Is this regarding the SIM card slot in the back left behind the SD card slot? Is there a driver update available somewhere? I've run all the Windows updates. I tried searching these forums but did not find a solution. Thanks.
Solved!
Go to Solution.

Hi, RedV
I've seen this issue before and have helped a few users with it. The steps to removing this issue can be found here. For your convenience, the steps are also listed below:
Open the Start menu and type Device Manager into the search box.
Open Device Manager.
Right-click on the WAN miniport device.
Select Update Driver Software...
Select Browse my computer for driver software
Select Let me pick from a list of device drivers on my computer
Uncheck the box Show comptatible devices
Pick any driver from within here. (As long as Windows installs a driver, the problem can be removed. I recommend a Bluetooth driver just for simplicity.)
Click OK at the warnings that are likely to pop up. These are just notifying you that this driver is not compatible with the WAN hardware.
Eventually the driver should install. Once it does, right-click on the device again and select Uninstall.
The problem should now go away and this error will not appear in Device Manager anymore.
Best of luck,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Where to download the MPIxO for Oracle Sparc T5-2 solaris 11.1

Hi,
I would like to ask help on how to dowload and apply the MPIxO driver for Oracle Sparc T5-2 server with Oracle Solaris 11.1 installed.
Thanks
Regards,
Andrew

Hi Marcel,
Thank you for this information. I'll check it. I just want to know if do I need to activate the MPXIO with this setup. Both controller of storage is connected to a SAN switch and only 1 port of HBA is connected to SAN switch. With the format output, it has two disk output.
Please help me if this setup is correct to eliminate single point of failure for storage connectivity.
The HBA card has two port and each port has different WWN. We are planning to connect both WWN with the same LUN from storage. Is this advisable?
Regards,
Andrew

About My pci driver for solairs sparc

Similar Messages

Maybe you are looking for