About Oracle for SAP.

hai,
For SAP we can use ordinary Oracle 8.1.7 ?
or for SAP, is there any seperate Oracle we have to use.
thanks in advance.

Ashok
SAP Uses Oracle database and it's regular Oracle only but version depends on SAP version.
Hope this helps
Thnaks
sat

Similar Messages

  • Problem about tdp for sap rman error

    I installed tdp for sap and scheduled a online backup , after the backup finished, I checked the log.
    all data files were backuped successfully. but there is an error about rman. I do not know how to do about that? Could you help me? I think the backup could be successful without rman, why in the backup log, it shows a rman error .
    I checked the initDEV.sap and initDEV.utl, there is no entry about rman, I do not use rman_util.
    BR0530I Cataloging backups of all database files...
    BR0278E Command output of 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog':
    Recovery Manager: Release 10.2.0.4.0 - Production on Sun Mar 8 13:34:21 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    RMAN>
    RMAN> connect target *
    connected to target database: DEV (DBID=3672496816)
    using target database control file instead of recovery catalog
    RMAN> *end-of-file*
    RMAN>
    host command complete
    RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28> 29> 30> 31> 32>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of catalog command on default channel at 03/08/2009 13:34:23
    ORA-19564: error occurred writing 8192 bytes at block number 1
    ORA-27091: unable to queue I/O
    ORA-27041: unable to open file
    IBM AIX RISC System/6000 Error: 13: Permission denied
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
    BR0279E Return code from 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog': 1
    BR0536E RMAN call for database instance DEV failed
    BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
    BR0532E Cataloging backups of all database files failed

    Hello Victor,
    we need the RMAN commands that were executed and at which step this error occurs.
    Maybe it is a problem with the snap controlfile for the AUTOBACKUP or many other scenarios are possible.
    We are also using the TDP for mySAP, but without RMAN support.
    If you want to use just RMAN (like we do for non-SAP systems / no BR*Tools) you can save a lot of license/service costs, if you are using TDP for Oracle, but keep in mind that you are losing the support for that by SAP. You can directly open a call by oracle for these situations.
    If you want this scenario as described we need more detailed information. Maybe a "LIST BACKUP" would also be nice.
    Regards
    Stefan

  • Problem about tdp for sap

    I installed tdp for sap and scheduled a online backup ,  after the backup finished, I checked the log.
    all data files were backuped successfully.  but there is an error about rman.  I do not know how to do about that?  Could you help me?    I think the backup could be successful without rman, why in the backup log, it shows a rman error .
    I checked the initDEV.sap and initDEV.utl,   there is no entry about rman,  I do not use rman_util.
    BR0530I Cataloging backups of all database files...
    BR0278E Command output of 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog':
    Recovery Manager: Release 10.2.0.4.0 - Production on Sun Mar 8 13:34:21 2009
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    RMAN>
    RMAN> connect target *
    connected to target database: DEV (DBID=3672496816)
    using target database control file instead of recovery catalog
    RMAN> *end-of-file*
    RMAN>
    host command complete
    RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28> 29> 30> 31> 32>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of catalog command on default channel at 03/08/2009 13:34:23
    ORA-19564: error occurred writing 8192 bytes at block number 1
    ORA-27091: unable to queue I/O
    ORA-27041: unable to open file
    IBM AIX RISC System/6000 Error: 13: Permission denied
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
    BR0279E Return code from 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog': 1
    BR0536E RMAN call for database instance DEV failed
    BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
    BR0532E Cataloging backups of all database files failed
    Edited by: victor on Mar 9, 2009 2:30 AM

    Victor,
    Looks like you have permission problems. Please check attached note to correct them.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=113747]
    Hope this helps.
    Manoj Chintawar

  • Authorization for Administation ofr oracle for SAP

    Hi,
    I want to know the transactions & authorizations required to administrate the oracle from SAP frontend.
    It is very helpful for me if anyone give me link or tell me from where I can start?
    Regards,
    Rajesh

    Rajesh,
    Indeed, you can do very little from the SAP gui as far as administration is concerned. However, you can get useful information on the database status
    db02 : Tablespace sizes, history, critical objects, missing indexes
    db03: Oracle parameters
    db12: Backup logs
    db13: Other database administration job logs and scheduling
    db17: Configure what is being checked during jobs like database checks
    db20: Influence how stats are calculated
    st04: Memory information on the database
    I hope this helps
    Andreas

  • About future for SAP XI?

    Hi Experts,
    Im new to SAP.
    Im an MCA fresher and im planning to go for SAP XI training with my friend's suggestion.
    Just i wanted to know the openings for XI and Future for XI.
    Can i start my career as XI fresher?
    what are the basic requirements i should have if i go for XI training?
    Kindly do needful.
    regards,
    Arvind.

    Hi Arvind Subramaniam  ,
    >>Can i start my career as XI fresher?
    Yes. It is a good Netweaver technology & u can either try as a developer or at Admin side. But there r good oppurtinities as a XI Developer.
    >>what are the basic requirements i should have if i go for XI training?
    XI is configuration type & maximum stuff wil be mapping . But , sometimes there arises a need to import JAVA code into XI. Hence if u know JAVA/J2EE it's a added advantage.
    All the best for u'r success in future!
    These r some excellent websites on basics of XI which familarizes u with XI:
    SAP Exchange Infrastructure 3.0 Integrating Heterogeneous Systems with Ease
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1ebea490-0201-0010-faad-a32dd753d009
    SAP NetWeaver Technology Overview
    http://www.gi-ev.de/regionalgruppen/aachen/vortraege/abstract/04/21-04.pdf
    SAP NetWeaver Visual Composer
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sdn-meets-labs-walldorf-05/sap%20netweaver%20visual%20composer%20in%202005.pdf
    SAP Exchange Infrastructure for Developers ( This is an excellent website for free pdf book for XI)
    http://www.sap-press.de/download/dateien/1191/sappress_exchange_infrastructure.pdf
    Exchange Infrastructure  :  XI Transaction Codes 
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xiTransactionCodes&
    A Beginner's Guide to SAP XI Settings part I
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    A Beginner's Guide to SAP XI Settings part II
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    SAP XI AND SLD
    http://www.sappro.com/downloads/nov06/XIandSLD.pdf
    Exchange Infrastructure Learning Map 
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/learning+map&
    SAP Exchange Infrastructure eLearning Catalog(U wil get all downloads regarding XI starting from basics to end)
    https://www.sdn.sap.com/irj/sdn/xi-elearning
    All Articles on SAP NetWeaver Exchange Infrastructure(This website gives al articles on XI)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f04b44aa-fe06-2a10-859e-82ad4965781d?startindex=101 [original link is broken]
    Mastering SAP Netweaver XI - Programming( PDF Book for XI)
    http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
    SAP XI Learning Guide
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html
    SAP Exchange Infrastructure 2.0
    http://www.sun.com/third-party/global/sap/collateral/SunSAPWP_final.pdf
    http://help.sap.com/bp_bpmv130/Documentation/Planning/TechnicalInfrasture.pdf
    Process Integration with SAP Netweaver new features and functions
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4042611d-04e5-2910-bd9d-f97627b1c164
    SAP NetWeaver Process Integration 7.1 –Overview
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
    End To End Process Integration Features in SP15 and higher incl. SAP NetWeaver 2004s
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/54f20a2e-0801-0010-f787-87653d356508
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

  • About license for SAP JVM

    My partner in China is look for alternate JVM to replace Oracle JVM in their solution.
             They want to know the following thing about SAP JVM.
    1.) Can SAP JAVA be opened to the third partner?
    2.) Can the third partner can sell their solution ,which embedded with SAP JVM?
    3.) Can SAP provide the relevant documents(include performance , interface and license authorized information)?

    Hi Kevin,
    it is only allowed to use the SAP JVM in combination with SAP Products.
    For more information/details you can contact me directly.
    Best regards,
    Michael

  • Installing Oracle for SAP on existing non-SAP RDBMS

    The title says it all -
    I haven't been able to find any real docs supporting or not supporting the practice of using an existing Oracle 10.2 RDBMS to add an SAP DB.  I know it's technically possible, but since the SAP Oracle installer is configured to build a new RDBMS for each SAP instance/DB installation, I'm wondering if it can be altered and piggy back on an existing one.
    The reason is I have a customer who would like to do this so they can continue to use an existing DEV Oracle server without adding the stress of an indepedent set of oracle binaries running, and consuming resources.

    > But aside from that - let's assume the release and patch levels from their own DBs are equal to the requirements from SAP.  What other considerations/issues/supportabilty problems might be encountered?
    If it's not a production system you could certainly go for it.
    I think though, that it's MUCH LESS maintenance work using a second ORACLE_HOME than to try to fiddle with the huge amount of single/interim patches SAP requires. If you just check
    Note 871096 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.2 (59 interim patches)
    Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4 (39 interim patches)
    I can imagine you having a pretty hard time aligning that with the other non-SAP databases. On top may come incompatibilities with OPatch (SAP uses a "special OPatch") where you may need to switch between the official one and the "SAP-one" depending on which patch you install.
    The only additional resources the new ORACLE_HOME uses is harddisk space (some GB) - which shouldn't be more expensive than the work you'll need to invest to keep the system and working for both.
    Technically it can be done - certainly.
    Markus

  • Recommended Oracle version for SAP 4.7 and for BW 3.5

    Hi,
    where I can find the SAP's recommended version of Oracle for SAP ERP 4.7 and BW 3.5?
    Thanks
    Message was edited by:
            giovanni maria maccioni

    Hi,
    Recommended would be 10.2.0.2
    Oracle has ended the customer care support for 9.2 in July 2007:
    Note 925871 - Discontinuation of 'Customer Care Support' for Oracle 9.2
    At the same time, SAP customers have a "free" year of  Extended Support for Version 9.2.
    9.2.0.8 is the latest patch set provided for 9.2. (see note 1021844)
    I think that, if you are planning to perform a new installation, it would be better to do it in 10.2

  • ABAP for SAP HANA

    Is there any difference in normal ABAP and ABAP for SAP HANA ? If yes , then please guide me how to proceed for learning ABAP for SAP HANA ?

    Hi Ruchi,
    There is a slight difference between ABAP and ABAP for HANA. If you are well aware of all ABAP concepts then you can easily understand the ABAP for HANA concepts.
    Some of the differnce which I observed.
    1.  New syntax for Open SQL is introduced, which includes support for comma separated lists, enhanced string expressions, the definition of host variables in a more standard fashion, and fewer restrictions for joins.
    eg:  SELECT so.matnr, so.mtart FROM mara AS so INTO TABLE @it_mara UPTO 10 ROWS.
    2.It uses the TOP DOWN approach so we can use HANA databases capabilities. you can get more information on this in this blog ABAP for HANA and "Code Push-Down"
    3. CDS (Core Data Services) View, AMDP (ABAP managed database procedures) are again new features. Refer this document. http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b01089ed-dead-3110-f28e-caa12aeb5e27?QuickLink=index&…
    Please go through this link It is helpful for you. https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0CCsQFjAD&url=http%3A%2F%2Fsapinsid…
    If you want to learn more about ABAP for SAP HANA then please register for the self placed course on OPENSAP. Here is the link (ABAP Development for SAP HANA - Dr. Jasmin Gruschke and Jens Weiler). I have completed this course and it was very helpful for me to understand the concepts of ABAP for HANA, so I will suggest you to enroll for this course.
    Hope this will help you.
    Regards,
    Sneha.

  • Error during the installation of ORACLE 10g for SAP MDM 5.5

    Hi all,
    I am installing ORACLE 10g on a SUSE LES 9 for a future MDM 5.5 system. While I launch the Installer I get the following error:
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/OraDb10g/database> Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-09-26_07-11-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(Unknown Source)
            at java.lang.ClassLoader.loadLibrary(Unknown Source)
            at java.lang.Runtime.loadLibrary0(Unknown Source)
            at java.lang.System.loadLibrary(Unknown Source)
            at sun.security.action.LoadLibraryAction.run(Unknown Source)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
            at sun.awt.DebugHelper.<clinit>(Unknown Source)
            at java.awt.Component.<clinit>(Unknown Source)
    I have installed all the required packages from SUSE :
    binutils-2.15.90.0.1.1-32.10
    gcc-3.3.3-43.41
    gcc-c++-3.3.3-43.41
    glibc-2.3.3-98.61
    gnome-libs-1.4.1.7-671.1
    libstdc++-3.3.3-43.41
    libstdc++-devel-3.3.3-43.41
    make-3.80-184.1
    pdksh-5.2.14-780.7
    sysstat-5.0.1-35.7
    xscreensaver-4.16-2.6
    Any ideas?
    Thanks in advance,
    Loukas

    Hi Elmar,
    I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
    Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
    https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
    So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
    Rgds,
    Louka

  • Oracle AS Adapter for SAP R/3

    Hello everyone.
    I have some questions abuot the Oracle AS Adabter for SAP.
    I have to get values out of miniSAP and integrate them in a BPEL Process. In SAP there is a function to generate a Webservice out of a BAPI for example! This Web Service I want to include in a bpel process. This is the way I try it till now!!!!
    Now I read an article about the Adapter.
    Is the task i explained abouve possible to do it with the adapter?
    If yes, Can I include every BAPI in a bpel process with the adapter?
    What are the prerequisites I need for the adapter? I have installed an Infrastructure, a Middle Tier (Portal) and the BPEL process manager.
    Thanks a lot

    Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
    I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

  • Oracle Integration Adapter for SAP R/3

    I am working with a customer implementing Oracle EBS Release 12.2.
    The customer has implemented SAP for financial modules and the oracle solution considers an EBS - SAP Integration for Receivables. Does anyone have any experience integrating Oracle EBS Receivables with SAP? Can you give us some guidance regarding EBS - SAP Integration best practices?
    We have found a paper regarding Oracle Integration Adapter for SAP R3. We would like to have some information about what are the Oracle products we can integrate with SAP using Oracle Integration Adapter for SAP R3.
    In case Oracle EBS can integrate with SAP using Oracle Integration Adapter, we would like to know if anyone has experience integrating Oracle EBS Receivables with SAP using Oracle Integration Adapter for SAP R3 for AR transactions and Receipts?
    Any help would be very much appreciated.

    Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
    I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

  • Oracle RAC + Clusterware and another Cluster with Clusterware for SAP

    Hi,
    I have some questions about implementation of Oracle RAC and Clusterware with SAP
    For exemple, an architecture with 4 servers ( 2 real and 2 vritual ).
    I would like to know if i can do this
    2 servers for the first cluster.
    First cluster is with Clusterware and Oracle RAC
    This is for all the SAP Oracle databases environment
    I think there is no problem here.
    Now, with 2 others servers il would like to make another cluster (with also clusterware ) for SAP Central services (SCS) and enque replication server (ERS)
    Because all architecture is for only one SAP environment with separate services.
    1 for Database (cluster 1)
    1 for Central services ( cluster 2, virtual machine )
    1 for Dialogue Instance (no cluster)
    To be clear, the second cluster is to make HA of central services SAP (SCS and ERS )
    My question 2 are :
    Is it a good job to do this ? or there is anything wrong ?
    Do i have to install antoher clusterware for this 2 servers or i have to make anything with the existing clusterware + oracle RAC ??
    Thank you very much for you help
    Edited by: user12395221 on 29 déc. 2009 15:36

    Hi Givre,
    have you checked: Providing High Availability for SAP Resources (http://www.oracle.com/technology/products/database/clusterware/pdf/sap-availability-on-rac-twp.pdf) available on otn.oracle.com/clusterware? Not being an SAP expert myself, I still think, this paper describes the configuration - at least partially - that you are trying to set up.
    Just an idea. Thanks,
    Markus

  • Archiving: experience with Oracle's Archive Adapter for SAP

    All,
    Does anyone have experience to share about Oracle's "Content Database Archive Adapter for SAP Applications"?
    Thanks
    Guenther

    Sasi,
    There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
    12.4.1 MySAP ERP Versions and APIs
    The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
    ERP:
    ■ SAP R/3 Enterprise 47x100
    ■ SAP R/3 Enterprise 47x200
    ■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
    ■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
    ■ SAP Java Connector (SAP JCo) Version 2.18.
    For the current release status of the SAP Java Connector, refer to SAP Note #549268
    in the SAP Service Marketplace.
    Release versions may vary by product component. In addition, SAP functions may
    vary by SAP product version and support package.
    Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
    It is not recommended to use the OracleAS Adapter for MySAP ERP with older
    versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
    example SAP R/3 4.6C, prior approval from iWay Software Product Management is
    required.

  • Volumes and Qtrees set up for SAP and Oracle

    Hi Gurus
    I Need your help Please
    I need to get Volumes and Qtrees set up for SAP and Oracle.
    I found a document from NetApp that helped a lot about the structure.
    But what I donu2019t know and canu2019t find anywhere is sizing for the volumes and Qtrees.
    I really need some guidelines on sizing these below:
    FlexVol saplog
    /usr/sap/SID
    /usr/sap/trans
    /sapmnt/SID
    /home/SIDadm
    /oracle/SID
    /oracle/SID/origlogA
    /oracle/SID/origlogB
    /oracle/SID/oraarch
    /oracle/SID/sapreorg
    /oracle/SID/sapbackup
    /oracle/SID/saparch
    FlexVol sapdata
    /oracle/SID/sapdata1
    /oracle/SID/sapdata2
    /oracle/SID/sapdataN
    FlexVol mirrlogs
    /oracle/SID/mirrlogA
    /oracle/SID/mirrlogB
    Thanks and appreciate your help

    > I have gone through the Inst Guide and I was surprised to see only 50 MB for Oracle software directory ?
    Where did you read that?
    > The sizing given in Installation guide is for typical setup or do we need to size as per our requirement ?
    The sizing give there is for the initial system setup. It does not contain customer specific requirements.
    The usual process is:
    - you contact your hardware vendor
    - you use http://service.sap.com/quicksizer together with him and fill in the data
    - the hardware vendor will offer you the storage and the machines for the setup
    - the vendor configures with you the storage and the necessary filesystem layout based on that sizing
    Each customers setup is different and requires the experience and knowledge from the respective hardware vendor how to set up the system so it performs well.
    You can follow the suggestions given here, this will be enough for the initial setup but the system will grow. This is not taken into account in the installation guide because it's customer specific.
    Markus

Maybe you are looking for

  • Error while trying to access repository from Application Explorer

    Hi All, I am trying to access the targets which I had previously created from AE. Everything was working fine. When I tried running iwae.sh script and open the target from AE it throws below error today. com.iwaysoftware.iwrepository.RepositoryExcept

  • SELECT permission denied with ownership chaining on

      I have a database ('Datamart') that contains views on the tables another database ('Rawdb') on the same server.  All tables and views are in 'dbo' in each database.  I turned cross-database ownership chaining on.  I created the roles RawdbReadRole

  • Column order in Mail (or From column won't stick)

    Not my first post about this, but thought I'd try again. Back in January I was asking if anyone else had the issue where the From column just won't stay on the left side. I like From, Subject, Date, To. But one way or another, the From column jumps o

  • Quarter variable  in Bex reports

    The report need to run for the selected quarter. The time char I am using is 0FISCPER3 The Q1 will be Period 1, 2,3 totals. Q2 will be Period 1 to 6 Q3 will be period 1 to 9 Q4 will be period 1 to 12. The reqiuired quarter will be selected at the tim

  • Why do some pics show up in my iMac photo stream as just a dotted line?

    When I click to enlarge, the actual picture shows up.  Other pics show as they should.  From the image notation, it appears that both are originated from my iphone, and I cannot guess why some are different from others.