About ORACLE_HOME used diskspace

I had install Oracle817 on red hat 6.2,the ORACLE_HOME is use a single partition ,when I use "du" to check the ORACLE_HOME ,it show use 1.2G disk space ,but when I use "df " to check the partition ,it show me 1.4G
disk space is used ,I don't know where are the 200M disk space is use ,why ? thank you !

Three solutions
1) set the registry TNS_ADMIN to point to the correct tnsnames.ora
This becomes the central tnsnames.ora on your machine.
2 issue E:\oracle\product\10.2.0\OraHome10\bin\tnsping
and notice it this time uses the correct tnsnames.ora
3 Use the Oracle Home Selector to make sure
E:\oracle\product\10.2.0\OraHome10
is first in the PATH
Solutuion 1 is preferred.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

Describe about CPU used in the technology of Blackberry?

Describe about CPU used in the technology of Blackberry?

CPU stands for Central Processing Unit. Check the below links -
http://en.wikipedia.org/wiki/Mobile_processor
http://en.wikipedia.org/wiki/CPU_power_dissipation
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Canot erase my macbook air ssd..always create a extended partition with about 5G used space

I cant erase my air ssd, always create about 5G used extended partition..

Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.

Home:about search uses facemood..

home:about search uses facemood...
ive uninstalled it via control panel, disabled and uninstalled it via firefox addons. reset the homepage. went to about:config and reset the following:
browser.search.order.1
browser.search.defaultenginename
browser.startup.homepage_override.buildID
browser.startup.homepage_override.mstone
keyword.URL
but still on the homepage it uses facemood! firefox help

that's '''about:home''' not reversed wording
Your home page is in '''browser.startup.homepage''' your can reset
or change it to whatever you want there, or see
*How to set the home page | How to | Firefox Help
*:https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_set-a-single-web-site-as-your-home-page
In your about:config filter on: facemood
:reset any variable that just has a single value in it, be careful if you see something with several urls named, or several items of any kind within the value.
Check also to see if you have an extension by that name.
These two have to do with Firefox update, they override your home page for one restart and should be unrelated to your problem.
:browser.startup.homepage_override.buildID :browser.startup.homepage_override.mstone keyword.URL

HT4796 I need to transfer my iTunes library, email and a few clean files from my PC to my new Mac. I was about to use the Migration Assistant, however I am concerned that viruses on my PC will tag along. Should I be concerned?

I need to transfer my iTunes library, email and a few clean files from my PC to my new Mac. I was about to use the Migration Assistant, however I am concerned that viruses on my PC will tag along. Should I be concerned?

No.

API indicator about sound using by the Flash Player

Is it possible to add an API indicator which will inform about sound using by the Flash Player?
I mean situation from web browsers where you mostly has few tabs opened and don't know which one is playing the sound. It would be great if Flash Player instance could inform about playing sound. Some kind of API, dynamic HTML tag (playingsound=TRUE/FALSE) or something like this which can give an opportunity to browser to react on. The best example is ofcourse Chrome which has own implementation of Flash Player and adds small speaker icon on tab which is playing the sound.
The main reason of this thread is issue 486262 – Provide visual indicator as to which tab is causing sound from Mozilla Firefox Development but it can be global feature and helpfull for every browser and other applications using FP.

Could you do me a favor and post a screenshot of this box that is appearing?
How do I capture and post a screenshot or video?

About the use of "Cut" on Finder

I'm very concerned about the use of "Cut" on Finder (Finder: Edit->Cut). I mean, when is it activated? What is its functionality?
Sorry but I've never seen it activated!
Very thanks in advance.

Since Windows has a file cut/paste, at some point someone thought about including that in the Finder. It doesn't really fit into the MaxOS though, so it is normally disabled (probably because it was never finished). You can enable it by adding an entry to the Finder's .plist - see this MacOSXhints article.

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

How do I know which add-ons have been validated as safe? When clicking "Add to Firefox" I get the scary warning window about only using add-ons from trusted

The scary warning that appears when I click "Add to Firefox" for a certain add-on discourages me from actually installing it.
"Install add-ons only from authors whom you trust. Malicious software can damage your computer or violate your privacy . . . (author not verified)"
In particular, I'm interested in the Password Exporter add-on. I want to be especially cautious as this will access all my passwords stored in Firefox. How do I actually know if an add-on is safe or not?

If you are talking about "Password Exporter 1.2.1", it's safe as I have been using that add-on for years and love it.

Posting here or AskTom about report using xmldb

Hello,
There was a posting here or on the asktom site about using xmldb to build the html for a report in a pl/sql region, I've looked and searched and even asked my buddy google about it and I cannot find the relevant posting if anyone rembers having seen it can you post the link.
Thanks,
Carl

Maybe you have this in mind ?
http://tkyte.blogspot.com/2006/01/i-like-online-communities.html
http://tkyte.blogspot.com/2006/01/9i-10g-version.html
Best regards
Maxim

About tables used in purchase order creation

Hi all,
In which table do th information about purchase organisation and vendor stored.
I am getting error vendor 3411 has not been created for pur organization 4000.
can anyone help me that which is the table used for this..
Regards,
KCV

Hi,
EKKO - po header
EKPO - po item
The error u mentioned could occur when the vender 3411 is not maintained for Pr. org 4000.
Regards
Vadi

Question about planning using serialization point in transaction S2L

Hello colleagues!
Iu2019ve try to implement the supply of production line (supply area) just in sequence. R/3 received dependent requirements and backflushes of serialization point behind target Supply Area from APO.
Then I got a few dependent demands with indicator u201CXu201D in u201Crequirement is serializedu201D field in transaction S2L. I started the automatic planning but replenishment proposal was created to cover all dependent demands. from the selection horizon (with ind. u201CXu201D and without ). But I need to cover dep. demands only with ind. X in u201Crequirement is serializedu201D field. I looked through SAP help and SPRO but I couldnu2019t find helpful information.
Please, help me to find solution.
Thanks.
Ivan.

Thanks for the feedback. I followed the link but I guess I just don't understand about the extended file system. Is HFS+ the same as Mac OS extended (Journaled).
Basically, yes.
I understand that I guess that case sensitive means just that, but what is the difference between journaled and extended? Does it mena that a log file is only saved for the journaled system?
When a filesystem is journaled, all changes to it are written to a log.
Do most people just format as Extended without journaled? I am about to reformat my iMac and install Leopard on there and I was wondering if I should format using the extended or the extended with journal?
Using the journaling option slightly decreases the amount of space on the drive usable by you and increases the chance of recovering data from the drive if a problem occurred. If you want, you can use the Disk Utility to turn it on and off without erasing the drive again.
(25598)

Question about Automator using Spaces.

I don't think this is the right place for this question, but I figured I am probably going to need to write an applescript to do what I want, so I decided to put it here.
I have an automation to open some Word documents on my idisk, then open Dictionary, then open Safari with some tabs. But the problem comes in with spaces. I have Word and Dictionary open on Space 1 and Safari open in Space 3. When the automation ends, I end on Space 3 and would like to know how I add a function to set the focus back to Space 1. It's not all that detrimental to the success of my Automation, but I only use Safari for research and would like to focus to end back on word. I have tried switching which apps open first, but I still end up on the 3rd Space.
My other question is, where can I go for reference to commands in Xcode and AppleScript that deal with Spaces? I love using that function and I have had some ideas about scripts that could help me with them, but I don't even know were I would start with commands.

There are several solutions to this.
The first option would be to send the appropriate key command to switch to space 1. If you've left your preferences as the defaults then you can:
<pre class=command>tell application "System Events" to keystroke "1" using {control down}</pre>
Which will send a Ctrl-1 and switch to space 1.
An alternative, which may be even better, is to activate the application you want to be frontmost:
<pre class=command>tell application "Microsoft Word" to activate</pre>
This should activate the application and switch to that application's space.

About ORACLE_HOME used diskspace

Similar Messages

Maybe you are looking for