About packing question in outbound delivery

Hi there:
Could you tell me whty some outbound delivery need to be packed before PGI and some do not need? I meant what's configuration to trigger that? Thanks.

Hello
Its definitely depends on the item Category getting determined during delv.
Check TCode VLPP - Packing Control By Item Category (SPRO - LE - Shipping - Packing)
By this you can control for each item category whether it can be packed or whether it requires packing. If an item category is characterized as requiring packing, the item must be packed in delivery, before goods issue. If it can be packed, you can pack it. You cannot pack items with an item category which cannot be packed.
For materials to be handled in batches, you control whether only items with batch available can be packed, or basically the cumulated main item quantity is packed.
For each item category, enter either the packing control "A" for item categories requiring packing or "B" for item categories which cannot be packed or, leave the field empty if you want to characterize the item category as "can be packed".
Regards
JP

Similar Messages

About Packing Instructions for Outbound Delivery

Hi Experts,
I've created a Packing Instruction (POP1 + POF1) for a Material 123456, using the Key Combination Material/Plant.
How can I use those Instructions into VL02n ?
Any idea?
Regards,
David

HI David,
Check whether you have maintained the required config under the following settings.
Logistics - General>Automatic Packing>Determination of Packing Instructions
If you have maintained the procedure as well as the necessary condition records in POF1 for your determination type maintained in your determination procedure, then you can use the Automatic Packing Icon in the delivery to make use of your POP1 & POF1.
You can find the Auto-Pack Icon by clicking the packing button in the delivery.
Hope it helps.
Regards,

Packing logic in outbound delivery VL01N

Hi All,
      We are creating outbound delivery using BDC. I am facing problem, while packing.
      Tcode : VL01n
      Screen PACK (SHIFT + F6 )
     Tab        PACK MATERIAL
             I am building the whole packing logic in BDC.
      Steps
              #1 . Create Handling units - Table control 1
             #2 . Pick the materials       - Table control 2
             #3 . Hit the pack button .
                I do this for all the HUs.
Problem: The table control 2 has only 10 visible line._ I cannot find a consistent method to scroll the table._?
Currently I am using the NEXT_PAGE button to scroll. [ PPLUS ]
     It displays the last 9 line items.
Scenario :
Can you guys suggest me a consistent way to scroll?
Please do not suggest the scroll bar option/ P+ / P++ - These are not working for this screen!!!

Hello,
    There is this program MV50AFZ1 inside that you have the
forms 1)USEREXIT_SAVE_DOCUMENT
         2)USEREXIT_SAVE_DOCUMENT_PREPARE.
I think you can write your code to populate the fields here.
Regards
ashish

Question Regarding Outbound Delivery

Hi,
In our business scenario automatic batch determination happening for creating delivery through VL10B from STO. Now business want if automatic batch determination not happening delivery should not be created.
For Example :
Automatic batch determination is not happening because of batch search strategy is missing in VCH1. So if batch determination is not happening in delivery delivery should not be created.
Normal scenario. If stock in place and batch determination search strategy not maintained it will create delivery without batch detail. They dot want to create the delivery in first place and VL10B should stop it for creating the delivery.
How to resolve the issue?

Hi,
Use incompletion log for Delivery Item and use the status group '04' as below:
Then test and let us know.
Thanks and regards,
Amitesh Anand

How to update packing list inform to an outbound delivery document

Hi all Experts,
I meet with an tough requirements, Is there any solution fuction can use to generate packing to a outbound delivery document?
PLease kindly advice, thanks!
Regards,
wei-guo

Hi,
I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
The picked quantity is generally filled:
u2022     by printing the picking list
u2022     Warehouse Management by creating a transfer order
u2022     or by manual entry
Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
Regards,
Andrea

Packing two HU's - Outbound delivery

Hi,
I am creating a RF transaction to merge two HU's with same delivery.
I want to merge two HU's with packing object 01 - Outbound delivery and same delivery.
I don't want to create a new HU, but merge one HU into another ie, add the source HU line item to Target HU.
I have used BAPI_HU_REPACK Function Module but it was giving an error "HU &1 is assigned to an object that cannot be processed here", where I have passed HUKEY as Target HU and in REPACK table passed the values of Source HU with FLAG_PACKHU as 'X'.
Is there any problem in sending the data.. or else i need to use a different Function Module. Please suggest me.
Thanks in advance... Waiting for ur reply.

Hemanth,
I recall that we used to update the HU status as well when we dissociated HU from delivery, though can't remember the reason now.
Pls check the VEKP-STATUS for HU after you have done with these 3 FM calls, I believe you have to update the status to 'BLANK' with the help of some FM, try it first if it works for you by direct updating it in table in Dev.
BR,
Diwakar

Outbound delivery deletion with shipment cost settled.

Dears
     I have one question about how to delete one outbound delivery which has one shipment document inside.
Scenarios like:
     we do normal sales order -> outbound delivery -> Picking -> Loading -> PGI -> invoice. and also from outbound delivery to shipment document and shipment cost settled. that means everything is done.
   But next month, the customer said they do not need such goods, they want to return all and take money back. so we need to cancel billing , PGI , and warehouse transactions. as you know , the previous month already been closed. we could not cancel shipment cost settlement . actually, we do not need to cancel it because the shipment is done by 3rd party partner. we need pay the transportation cost.
the problem, is when I use VL02n to delete outbound delivery item, it is not allowed because in document flow, there is one shipment document could not be deleted. but this outbound delivery status is OPEN, it always books some items which we will never delivery.
     is there one can help me about how to delete outbound delivery or how to close it to avoid stock booking ( ATP)?
thanks
jerry W.

hello Jürgen L
thanks for your answer. I fully agree with you. it is just our business user ( specially from warehouse) want to make process simple, so then use this way to cancel billing and PGI, then delete delivery lines. I will push them to use standard process .
thanks again.
best regards,
jerry W.

About packing material type

hi
when i entering Pack material in outbound delivery i am getting this type of error how to solve this
S100 does not have packaging material type and is therefore not a pack.mat.
Message no. HUSELECT041
regards
raj

Hi,
The material what you are trying is not a Packing material type
to check whether the material XXX you are using is a Packaging material
go to MM03 enter the material no
execute
in the next screen you can see "I" button in blue colour
press that button you can see the material type
the error message is that the material what you have selected
is not a packaging material type hope you understand
G.Ganesh Kumar

About packing material

hi
when i entering Pack material in outbound delivery i am getting this type of error how to solve this
S100 does not have packaging material type and is therefore not a pack.mat.
Message no. HUSELECT041
regards
raj

Hello Friend,
Kindly assign your packing material in your Material Master Data: Basic Data Tab: Matl Grp Pack.Matls field, under Packing Material Data which you want pack during delivery.
Take care.
JP

Question about outbound delivery

Hi there:
Here is my scenario,our plant 0001 has two storage location A and B,and one material stored in this plant has respective inventory for those two storage location A 100 pcs and B 100 pcs,once we finish placing sales order to this material and be about to create outbound delivery,my question is what's the logice for system to capture inventory for deliverying? Which inventory of storage location will system to issue material ? Suppose we placed order for this material 50 pcs,which inventory of storage location will be decrease to 50 pcs? A or B? What's the logic?

Dear Allen
Automatic Storage location determination can be configured in the "Logistics Execution" by using the SAP Standard rules
MALA, RETA, MARE
Pls go through the system for the logic of MALA & RETA. ( its easy)
MARE is the combination of MALA & RETA
Meaning,
Systems first uses the logic of MALA,
IF NOT FEASIBLE,
then it uses the logic of RETA
to determine the storage location automatically in the DELIVERY.
Alternatively
You can also enter Storage location manually in the Delivery note.
Hope, it makes you clear.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Packing handling units to outbound delivery with batch management

Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
Isaac

Dear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely

Packing using function modules in outbound delivery

Hi All,
         I am creating a outbound delivery using BDC. I am trying to Create HUs, Pack and assign serial numbers. I wish to do it using standard FMs.
Please advise.
Step # 1. I was able to create HUs using BAPI_HU_CREATE .
               I was not sure on the HU_EXID_TYPE though. I created with
                             'F' -No. rnge obj. HU_VEKP external interval - SSCC18 before GI.
Step #2 I assigned the HU to my Outbound delivery by updating VPOBJKEY and VPOBJ field of VEKP table. QUERY.
                This also successful. I am now able to see the HU attached to the Outbound delivery.:)
Step #3 But I am not sure how to do the packing/ Assign Serial numbers. Need help?
                     I am working with FM WS_DELIVERY_UPDATE...... Pls advice.
                       Not sure on the values that I need to pass. Please help!
Thanks!

hi sridhar,
i have the same requirement as yours....
but i m facing some problems with it....can u please share u r solution ?
thanks and regards,
Omkar

Pack existing Handling Units into outbound delivery

Hi,
The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
Has anybody faced a similar issue.
Thanks
Martin

Hallo!
Yes, I have the same problem now.
In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
Nowadays this solution is not sufficient, because the old hu has serial numbers.
Any solution in sight?
bye
bernhard

Information about outbound delivery and its handling units

Hi All experts,
I am working on a requirement where I have to display information about the following :
1. Outbound delivery number.
2. related Handling units( 1 or 2 ) indentification number.
3. Transport number.
4. Shipping to party.
5. Line items of handling units like material inside the handling unit.
6. Material quantity.
In the selection criteria user is given the choice of entering
1.Outbound delivery number.
2.Transport number.
3. Handling unit identification 1 or 2
4. Shipping to party
Based on this information on selection screen ouput needs to come out.
Could you people let me know about the tables and function modules which gives the informaiton back based on these details.
Thanks,
Mark

Hi Mark,
try out with IDOC_OUTPUT_DELVRY this Function Module.
Reward points if it is useful.
Regards,
Prasad

Packing outbound delivery

Is it possible to pack more than one outbound delivery in the same pack? Can you explain me how can I do this? (consider that we don´t use shipping)
very thanks in advance!!

Hello Andrea
When you say "we don´t use shipping", I am guessing you mean that you don't use Transportation (Shipment) functionality.
You can not pack more than one outbound delivery in the same pack if you don't use Transportation. In Transportation you can create a shipment with multiple deliveries and pack them together.
Please post this in LE forum to get better guidance.

About packing question in outbound delivery

Similar Messages

Maybe you are looking for