About PB 12.6 SP00 PL02 (build 4035).

Hi.
Has anyone tried PB 12.6 SP00 PL02 (build 4035)? I ask because after installation, when I try to launch Powerbuilder Classic 12.6 I receive the following error:
And PBGShare126.dll isn't installed in \Program Files\Sybase\Shared\Powerbuilder folder...
I wonder if there is a problem with the installer...
Andreas.

Hi...
I did found the problem... For some reason (maybe from an old install of 12.6 beta), there were two installation folders, one under Program Files\Sybase and another under Program Files\SAP. I uninstalled PB 12.6, erased Program Files\SAP and reinstalled... After that I was able to setup the last ebf. Now everything works fine.
Andreas.

Similar Messages

How to edit ABOUT and HELP contents after app build operation?

I hope people can read the HELP contents and ABOUT information from the program after I build the VI into an exe file or an install file. I don't know where to edit those informations. Thanks!

After you build a VI into an application, (.exe) nothing in it can be changed since any changes would require the application to be recompiled, and that requires the LabVIEW development environment.
On a Windows PC, the "Help" file is external to the application, so you could setup in the VI Proerties > Documentation the link to the exteranl Help file, then edit that file whenever you need to. This path would have to setup before you build the .exe and would not be able to be changed.
You could use a similar approach for an "About" screen. Make a sub-vi for the About screen, and have the application builder set to "Small target file with exteranl file for suVIs" under the Build Options. This will create two files for your built application. An .exe th
at is your top level VI, and an .llb that contains all your subVIs. When you need to change the About info, you would just need to modify your original About dialog, then copy it into the .llb of the built application overwritting the original one.
If this is not what you are asking, please provide some more detail.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

[Info] Want to know about the existence of Illustrator debug build

Hi All,
I am the new one in Illustrator. and have a query about Adobe Illustrator product.
Question: Does Adobe provide a debug build for Illustrator?
Please let me know about this.
Regards,
Alam

As we have two separate build(debug and release) for InDesign
So let me know clearly - Does we have two separate build(debug and release) in Illustrator or We have only one build.
Regards
Alam

About what can i do for building exchange server

hi ,
i want to know any thing about building new exchange server in my comapny and i want to know some issues about this
- if i build this server in my company and buy server hardware how much of the exchange licence that support 50000 users
and also what meant by " this plane support 1 to 100 mailbox ?? " this means it support from 1 to 100 users ????
- and also what is the best brand of servers that can i use it in my company
50000 user will be in the future not now but i want to know the licence that support this number of user
and i want every user is maximum 2 GB mailbox
also i want to know what the bandwidth should i use for this issues from internet service providers ???
i wand to know general information also with links for each questions that i asked not detailed information
and prerequisites software needed to build this system ??and also prices
thank you and goodbye

what meant by " this plane support 1 to 100 mailbox ?? " this means it support from 1 to 100 users
Call volume licensing expert at Microsoft to help you figuring out this...
Volume License Site: http://www.microsoft.com/licensing/
Blog |
Get Your Exchange Powershell Tip of the Day from here

Question about config the LD SCDF file Builder

How to do this "configure the required database driver jar file", thanks a lot.

Under DB-> Configure Database Aliases -> JDBC Driver -> Add
- Mike
"LiangYi" <[email protected]> wrote:
>
How to do this "configure the required database driver jar file", thanks
a lot.

Newbee questions about XE application builder

Hi
I find that Oracle support someting that we can use to build some real database driven applications
i have some questions about it :
1-Does this application builder differ from Oracle 10g R2 Application builder ? i means is it limited ?
2-Does any one use it to build a real world application that works some where in some business place ?
3-what is its behind code and technology , does it use JSF and managed Beans ? how i can see the generted codes ?
Thanks

Hello,
Here's the link to the Application Express Forum Oracle Application Express (APEX)
You should also look at the Application Express OTN page, http://www.oracle.com/technology/products/database/application_express/index.html there is howtos tutorials all sorts of good stuff.
Carl

Why is Building an exe in LabVIEW 8.6.1 so slow?

I have a fairly large application (about 2000 VIs) that I am trying to convert from LV7.1.1 to LV8.6.1 and it is a very challenging process!
I was able to load all of the VIs into LabVIEW 8.6.1 and correct all of the mislinked VIs (such as VI names that changed in the Report Generation toolkit and others), but when I try to create an exe it takes about 1 second per VI to build. Why does it take so long?
Also, when the exe is finished compiling, on the 2 computers I've tried it on, the exe doesn't load (it gives a windows crash!). I tried creating the exe in a "clean" virtual environment and that worked which means I probably have version conflicts with the other 2 "real" computers (I have 4 versions of LabVIEW installed on the real computers). I've also tried loading it into LabVIEW 8.5.1 and the creation of the exe is a lot faster but the exe still does not work.
This is getting really confusing and frustrating!
Thanks,
Bruce

It takes about 10 minutes to compile in LV851 and about 20 minutes to compile in LV861f1. Both take about 5 minutes when the progress bar gets to the last VI.
I was able to get my code to
compile to an exe that is executable by uninstalling IMAQ 4.1 (Vision
Acquisition Software 8.6) and installing IMAQ 3.8 (VAS 8.5). I avoid
IMAQ 4.0 because the structure of the .iid (for instance img0.iid)
files is messed up (see NI forum iid file structure in IMAQ 4.0 changed). This bug is fixed in IMAQ 4.1 but apparently there are other new bugs that were introduced.
I'll try my luck with IMAQ 4.2 when it comes out, but until then I have work to do.
Days
lost, totally frustrating. Not a good LabVIEW/NI experience. And I'm
stuck using old software versions to get things to work.
Bruce
P.S. I've been cross posting to lavag forums as well (exe built with LV crashes) about similar issues regarding my upgrading experience.
Bruce

Can't Build 64-bit Tomcat Connector Module (mod_jk)

I've been using the Tomcat Connector Module on my server so all requests can be logged by Apache, I only need to open port 80 on the firewall, and sites that use jsp with other technologies look more cohesive to the user.
In the past when a new version of the module was released I'd just download the source, unzip it, build it and instal it. Following the included instructions, "for the impatient Apache admins," I used:
./configure --with-apxs=/usr/sbin/apxs
to configure the build, then "make" and "sudo make install" to build and install the module.
This has always worked well (except it always installed the module in the wrong directory, which I never corrected because I liked to test the new module before I got rid of the old one), and when I moved to an Intel Mac, it continued to work. All the Apple-provided modules were universal binaries, but the i386 modules I built worked fine.
Now, with Leopard, we have a new, 64-bit Apache 2. I had been looking forward to working with Apache 2, and 64-bit is nice too, right? But now that it's here I'm not so sure.
My first disillusionment was that, when I downloaded the mod_jk source and built it using the same procedure I had been using, Apache refused to load the module, saying it had the wrong architecture. I checked the provided modules to see what architecture it wanted, and they were all universal binaries with four architectures, which didn't really narrow it down too much, but since I could rule out the ppc and ppc64 architectures, and the "wrong" one I built was i386, that left x86_64 as the only possibility.
Since I barely know what I'm doing, I'm not about to try anything crazy like building a universal binary (although I did try to follow this tutorial, but it didn't work for this project and his instructions didn't provide enough detail for me to even begin to figure out why), but I can't even figure out how to build a 64-bit binary.
I do have Xcode 3.0, so I should have the ability to build 64-bit binaries, and I have the new Java 1.6.0, which is also supposed to be 64-bit, so I should be race-ready, but when I run the configure script, specifying which Java version to use and which architecture to build:
./configure --with-apxs=/usr/sbin/apxs --with-arch-type=x86_64 --with-java-home=/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Hom e
I still end up with an i386 binary when the smoke clears, and in the log is a warning:
configure: WARNING: you should use --build, --host, --target
I'd be happy to do that if I had a clue what values to specify for them. Does anybody want to guess? Here's what it keeps taking for default values:
checking build system type... i386-apple-darwin9.2.2
checking host system type... i386-apple-darwin9.2.2
checking target system type... i386-apple-darwin9.2.2
I have a feeling I can't just substitute x86_64 for i386 (i.e. x86_64-apple-darwin9.2.2). The "x86_64-apple-darwin" part might be right, but I don't know about the 9.2.2. I've poked around the filesystem and gotten thoroughly confused. There seem to be all kinds of headers and compilers for i386 and x86_64 and something called i686, which seems to be related to x86_64 somehow, but I have no idea how to point the makefile to the right ones. I don't even know how or why it seems to be perfectly capable of finding everything it needs to build for i386 without my help, and even when I try to mislead it by suggesting I might want it to build for x86_64, it still unerringly finds all the i386 stuff and builds the module with them.
Since no one seems to provide Mac OS binaries of anything, it would be really nice to understand how to do this. I might even want to go crazy and build a 64-bit PostgreSQL or something like that, but if I can't even build a simple Apache module anymore, my hopes are fading.
If anybody is somehow clued-in on how all this stuff works, I'd really appreciate a brain-dump.
Thanks.

Thank you, that works for me too!
At first I was worried because, when I ran configure it said:
checking build system type... i386-apple-darwin9.3.0
checking host system type... i386-apple-darwin9.3.0
checking target system type... i386-apple-darwin9.3.0
But I went ahead and ran make anyway, and here's what I ended up with:
apache-2.0/mod_jk.so: Mach-O 64-bit bundle x86_64
which I could install and test. It even works!
Where did you find this information? I did a lot of digging too, but I must have been digging in the wrong places. I always like to go back to the source and see what else I can learn. Maybe then I can take another run at building a universal binary.

Blue screen of death when building blu-ray in Encore CS6

I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
§ Manufacturer: Toshiba
§ Manufacturer Part Number: PSAY1U-05U027
§ Product Line: Satellite
§ Product Series: P755
§ Product Model: P755-S5375
§ Product Name: Satellite P755-S5375 Notebook
§ Product Type: Notebook
§ Processor Manufacturer: Intel
§ Processor Type: Core i7
§ Processor Model: i7-2670QM
§ Processor Speed: 2.20 GHz
§ Processor Core: Quad-core (4 Core)
§ Cache: 6 MB
§ Chipset Manufacturer: Intel
§ Chipset Model: HM65 Express
§ Standard Memory: 4 GB
§ Memory Technology: DDR3 SDRAM
§ Memory Standard: DDR3-1333/PC3-10600
§ Number of Total Memory Slots: 2
§ Hard Drive Capacity: 500 GB
§ Screen Size: 15.6"
§ Display Screen Type: Active Matrix TFT Color LCD
§ Aspect Ratio: 16:9
§ Screen Mode: WXGA
§ Backlight Technology: LED
§ Screen Resolution: 1366 x 768
§ Graphics Controller Manufacturer: Intel
§ Graphics Controller Model: HD 3000
§ Graphics Memory Capacity: 1.65 GB
§ Graphics Memory Accessibility: Shared
§ Ethernet Technology: Fast Ethernet
§ Wi-Fi: Yes
§ Wi-Fi Standard: IEEE 802.11b/g/n
§ Webcam: Yes
§ Operating System: Genuine Windows 7 Home Premium with SP1
§ Operating System Architecture: 64-bit
§ Pointing Device Type: TouchPad
§ Number of Cells: 6-cell
§ Battery Chemistry: Lithium Ion (Li-Ion)
§ Width: 15.0"
§ Depth: 9.8"
§ Weight (Approximate): 5.40 lb
§ Package Contents:
§ Satellite P755-S5375 Notebook
§ Lithium Ion Battery
§ AC Adapter
§ Green Compliant: Yes
§ Green Compliance Certificate/Authority: RoHS
Installed programs:
Name                                                            Version
Microsoft Application Error Reporting                           12.0.6015.5000
Microsoft Office Click-to-Run 2010                              14.0.4763.1000
Microsoft Office 2010                                           14.0.4763.1000
Windows Live Essentials                                         15.4.3502.0922
Apple Application Support                                       2.1.7
Windows Live Writer                                             15.4.3502.0922
Microsoft_VC90_MFCLOC_x86                                       1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application                                  2.0.3.3
Windows Live Messenger                                          15.4.3538.0513
Microsoft_VC90_CRT_x86                                          1.00.0000
Google Toolbar for Internet Explorer                            1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219     10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64)                 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU]                 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219     10.0.40219
Toshiba Online Backup                                           2.0.0.31
TOSHIBA ReelTime                                                1.7.21.64
Windows Live Remote Client Resources                            15.4.5722.2
Windows Live SOXE Definitions                                   15.4.3502.0922
Adobe AIR                                                       3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections        15.4.5722.2
Windows Live Communications Platform                            15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
Apple Software Update                                           2.1.3.127
Windows Live UX Platform Language Pack                          15.4.3508.1109
Windows Live Photo Gallery                                      15.4.3502.0922
bl                                                              1.0.0
Windows Live Mail                                               15.4.3502.0922
Java(TM) 6 Update 25                                            6.0.250
MSVCRT_amd64                                                    15.4.2862.0708
TOSHIBA Face Recognition                                        3.1.17.64
ph                                                              1.0.0
Adobe Widget Browser                                            2.0.348
Windows Live Writer                                             15.4.3502.0922
Mesh Runtime                                                    15.4.5722.2
TOSHIBA Supervisor Password                                     1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch                10.1.1
Adobe Reader X MUI                                              10.0.0
TOSHIBA Media Controller Plug-in                                1.0.7.5
Windows Live Photo Gallery                                      15.4.3502.0922
Windows Live Photo Common                                       15.4.3502.0922
Label@Once 1.0                                                  1.0
PDF Settings CS6                                                11.0
Toshiba Book Place                                              2.2.7530
Windows Live PIMT Platform                                      15.4.3508.1109
TOSHIBA Wireless LAN Indicator                                  1.0.5
D3DX10                                                          15.4.2368.0902
Utility Common Driver                                           1.0.52.3C
Junk Mail filter update                                         15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
TOSHIBA HDD/SSD Alert                                           3.1.64.9
Windows Live Remote Service                                     15.4.5722.2
Toshiba App Place                                               1.0.6.3
Windows Live Mesh                                               15.4.3502.0922
Windows Live Language Selector                                  15.4.3538.0513
QuickTime                                                       7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver              2.0.34.0
TOSHIBA Value Added Package                                     1.6.1.64
Microsoft_VC80_CRT_x86                                          8.0.50727.4053
Google Update Helper                                            1.3.21.111
TOSHIBA HDD Protection                                          2.2.2.15
7-Zip 9.20 (x64 edition)                                        9.20.00.0
TOSHIBA PC Health Monitor                                       1.7.9.64
Windows Live Mail                                               15.4.3502.0922
Adobe Help Manager                                              4.0.244
MSVCRT                                                          15.4.2862.0708
Windows Live Remote Client                                      15.4.5722.2
Blackmagic ATEM Switchers                                       3.0.1.0
Microsoft_VC90_MFC_x86                                          1.00.0000
Windows Live Photo Common                                       15.4.3502.0922
Windows Live ID Sign-in Assistant                               7.250.4232.0
Microsoft Visual C++ 2005 Redistributable                       8.0.61001
Windows Live Messenger                                          15.4.3538.0513
Windows Live Mesh                                               15.4.3502.0922
Windows Live Writer                                             15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17    9.0.30729
TOSHIBA Hardware Setup                                          1.63.1.37C
Microsoft Silverlight                                           4.0.50401.0
PlayReady PC Runtime x86                                        1.3.0
Intel(R) WiDi                                                   2.1.41.0
Windows Live MIME IFilter                                       15.4.3502.0922
TOSHIBA Flash Cards Support Utility                             1.63.0.12C
TOSHIBA eco Utility                                             1.3.5.64
Windows Live UX Platform                                        15.4.3502.0922
TOSHIBA Wireless Display Monitor                                1.0.1
Debugging Tools for Windows (x64)                               6.12.2.633
Windows Live Remote Service Resources                           15.4.5722.2
Windows Live Writer Resources                                   15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17    9.0.30729
Intel(R) PROSet/Wireless WiFi Software                          14.01.1000
Windows Live Installer                                          15.4.3502.0922
TOSHIBA Disc Creator                                            2.1.0.11 for x64
PlayReady PC Runtime amd64                                      1.3.0
Windows Live SOXE                                               15.4.3502.0922
Java Auto Updater                                               2.0.4.1
TOSHIBA Bulletin Board                                          1.6.08.64
Crash details:
Problem signature:
Problem Event Name:            BlueScreen
OS Version:                           6.1.7601.2.1.0.768.3
Locale ID:                              1041
Additional information about the problem:
BCCode:                               d1
BCP1:                                   0000000000000001
BCP2:                                   0000000000000002
BCP3:                                   0000000000000008
BCP4:                                   0000000000000001
OS Version:                           6_1_7601
Service Pack:                        1_0
Product:                                768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ??              ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
00000000`00000001 ??              ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ??              ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0        mov     rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwner

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Wix problem in hosted build, results in BadImageFormatException?

I am about to start using the hosted build in VSOnline. But I have run into a problem with a Wix installer Project.
The build fails with the following error on the hosted build agent:
Unhandled Exception: System.BadImageFormatException: Could not load file or assembly 'file:///C:\Program Files (x86)\WiX Toolset v3.7\bin\Heat.exe' or one of its dependencies. An attempt was made to load a program with an incorrect format.
In the log file I find this (some details has been replaced with xxxxx to protect the innocent):
BeforeBuild:
         C:\Program Files (x86)\WiX Toolset v3.7\bin\Heat.exe dir "C:\a\src\xxxxxxxxxxx\bin\Release" -cg xxxxxxComponents -dr INSTALLLOCATION -sreg -srd -var var.SourceDir -sw1076 -sw1055 -ag -sfrag -sw1076
-sw1055 -t Filter.xslt -out Components.wxs
         Could not load file or assembly 'file:///C:\Program Files (x86)\WiX Toolset v3.7\bin\Heat.exe' or one of its dependencies. An attempt was made to load a program with an incorrect format.
            at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder,
Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
            at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder,
Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
            at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, Boolean throwOnFileNotFound,
Boolean forIntrospection, Boolean suppressSecurityChecks)
            at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean
suppressSecurityChecks, StackCrawlMark& stackMark)
            at System.Reflection.Assembly.LoadFrom(String assemblyFile)
            at Microsoft.Tools.WindowsInstallerXml.Build.Tasks.WixToolTask.ExecuteToolThread(Object parameters)
The build works well from Visual Studio on my local dev workstation (Windows 8.1 x64).
Some details about the project, the solution builds two ActiveX Controls (C++ OCX) and a couple of C# libraries and an application.
Any tips on changes I can try to work around this problem?
/Per
Per Salmi, Software Developer .NET Technologies PerSalmi.NET

Hi Per,
Please let us know if there any update. If the issue is fixed, please share your solution here. If not, you can try to add the heat into source control and check in
to see if the issue can be resolved.
Another option is configure an on-premise build controller to build your project. For how to configure an on-premise build controller, you can refer to this thread
for more information.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

FU4CIListener build.xml not setting properties?

I am following the Ant Task Setup. I have flex sdk 3.6.0.X, apache-ant 1.8.2 and the flexunit source 4.1.0.
When I run > ant -v clean package
function(){return A.apply(null,[this].concat($A(arguments)))}
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: C:\projects\FlexUnit4CIListener\build.xml
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
parsing buildfile C:\projects\FlexUnit4CIListener\build.xml with URI = file:/C:/projects/FlexUnit4CIListener/build.xml
Project base dir set to: C:\projects\FlexUnit4CIListener
parsing buildfile jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
Importing file C:\projects\utils.xml from C:\projects\FlexUnit4CIListener\build.xml
Overriding previous definition of reference to ant.projectHelper
parsing buildfile C:\projects\utils.xml with URI = file:/C:/projects/utils.xml
[macrodef] creating macro gpg
[macrodef] creating macro sonatype-bundle
Overriding previous definition of reference to ant.projectHelper
[property] Loading Environment env.
Property "build.version" has not been set
Property "build.number" has not been set
Property "build.sdk" has not been set
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, report, package, deploy, ]
clean:
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\bin
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\docs
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\sonatype
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
Build sequence for target(s) `package' is [init, compile, report, package]
Complete build sequence is [init, compile, report, package, clean, deploy, ]
init:
    [mkdir] Skipping C:\projects\FlexUnit4CIListener\libs because it already exists.
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\sonatype
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\docs
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\libs
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
compile:
    [compc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [compc] Adobe Compc (Flex Component Compiler)
    [compc] Version 3.6.0 build 16995
    [compc] Copyright (c) 2004-2007 Adobe Systems, Inc. All rights reserved.
    [compc]
    [compc] command line: Error: configuration variable 'output' value contains unknown token 'build.version'
    [compc]
    [compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
C:\projects\FlexUnit4CIListener\build.xml:50: compc task failed
        at flex.ant.FlexTask.executeInProcess(FlexTask.java:299)
        at flex.ant.FlexTask.execute(FlexTask.java:225)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.Main.runBuild(Main.java:809)
        at org.apache.tools.ant.Main.startAnt(Main.java:217)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
build.version, build.number & build.sdk are properties that are not being set. I would assume that they should be set internally somehow. However, if I manually set them via -D switches (with arbitrary values) I get the following:
>ant -v clean package -Dbuild.version=1.2.3.4 -Dbuild.number=666 -Dbuild.sdk=4.1
function(){return A.apply(null,[this].concat($A(arguments)))}
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: C:\projects\FlexUnit4CIListener\build.xml
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
parsing buildfile C:\projects\FlexUnit4CIListener\build.xml with URI = file:/C:/projects/FlexUnit4CIListener/build.xml
Project base dir set to: C:\projects\FlexUnit4CIListener
parsing buildfile jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
Importing file C:\projects\utils.xml from C:\projects\FlexUnit4CIListener\build.xml
Overriding previous definition of reference to ant.projectHelper
parsing buildfile C:\projects\utils.xml with URI = file:/C:/projects/utils.xml
[macrodef] creating macro gpg
[macrodef] creating macro sonatype-bundle
Overriding previous definition of reference to ant.projectHelper
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, report, package, deploy, ]
clean:
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\bin
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\docs
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\sonatype
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
Build sequence for target(s) `package' is [init, compile, report, package]
Complete build sequence is [init, compile, report, package, clean, deploy, ]
init:
    [mkdir] Skipping C:\projects\FlexUnit4CIListener\libs because it already exists.
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\sonatype
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\docs
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\libs
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
compile:
    [compc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [compc] C:\projects\FlexUnit4CIListener\target\bin\flexunit-cilistener-1.2.3.4-666-4.1.swc (11773 bytes)
report:
Skipped because property 'build.report' not set.
package:
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\target
     [copy] Copying C:\projects\FlexUnit4CIListener\target\bin\flexunit-cilistener-1.2.3.4-666-4.1.swc to C:\projects\FlexUnit4CIListener\target\flexunit-cilistener-1.2.3.4-666-4.1.swc
BUILD SUCCESSFUL
Total time: 4 seconds
I can see where the previous 3 properties are being used in the swc output file name, but now there is a build.report property that is not being set. How do I know which properties need to be set, and what to set them to?

I was using the 4.5.1 flex SDK but there seemed to be other issues so I just used the link directly from the Ant Task Setup page (instead of using the newest SDK). Upon following your instructions to ant build from the root directory, everything seemed to work correctly with a few exceptions. Below is the last part of the output from the build.
function(){return A.apply(null,[this].concat($A(arguments)))}
test:
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
Project base dir set to: C:\projects\FlexUnit4Test
      [ant] calling target(s) [test] in build file C:\projects\FlexUnit4Test\build.xml
parsing buildfile C:\projects\FlexUnit4Test\build.xml with URI = file:/C:/projects/FlexUnit4Test/build.xml
Project base dir set to: C:\projects\FlexUnit4Test
[property] Loading Environment env.
Override ignored for property "FLEX_HOME"
Property "env.FLEX_COVER_VIEWER" has not been set
[macrodef] creating macro compile-runner
[macrodef] creating macro execute-tests
[macrodef] creating macro execute-tests-using-flexcover
[macrodef] creating macro generate-html-report
      [ant] Entering C:\projects\FlexUnit4Test\build.xml...
Build sequence for target(s) `test' is [init, test-only, test-and-instrument, test]
Complete build sequence is [init, test-only, test-and-instrument, test, clean, ]
init:
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\xunit\flex
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\xunit\as3
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\flexcover
     [copy] Copying 5 files to C:\projects\FlexUnit4Test\libs
     [copy] Copying C:\projects\FlexUnit4CIListener\target\flexunit-cilistener-4.1.0-x-y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-cilistener-4.1.0-x-y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4FluintExtensions\target\fluint-extensions-4.1.0-x-y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\fluint-extensions-4.1.0-x-y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-flex_y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-4.1.0-x-flex_y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4FlexCoverListener\target\flexunit-flexcoverlistener-4.1.0-x-y.y.y.y. swc to C:\projects\FlexUnit4Test\libs\flexunit-flexcoverlistener-4.1.0-x-y.y.y.y.swc
     [copy] Copying 1 file to C:\projects\FlexUnit4Test\libs\build
     [copy] Copying C:\projects\FlexUnit4AntTasks\target\flexUnitTasks-4.1.0-x.jar to C:\projects\FlexUnit4Test\libs\build\flexUnitTasks-4.1.0-x.jar
test-only:
     [echo] Testing FlexUnit Flex build...
    [mxmlc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [mxmlc] C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf (924564 bytes)
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [C:\projects\FlexUnit4Test]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [C:\flexunit]
[flexunit] haltonfailure: [false]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [C:\projects\FlexUnit4Test\target\report\xunit\flex]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Entry [C:\projects\FlexUnit4Test\target\bin] already available in local trust file at [C:\Documents and Settings\Administrator\Application Data\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexUnit.cfg].
[flexunit] Executing 'rundll32' with arguments:
[flexunit] 'url.dll,FileProtocolHandler'
[flexunit] 'C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
      [ant] Exiting C:\projects\FlexUnit4Test\build.xml.
After this part of the log I get the following:
function(){return A.apply(null,[this].concat($A(arguments)))}
BUILD FAILED
C:\projects\build.xml:103: The following error occurred while executing this line:
C:\projects\FlexUnit4Test\build.xml:180: The following error occurred while executing this line:
C:\projects\FlexUnit4Test\build.xml:62: java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
        at java.util.concurrent.FutureTask$Sync.innerGet(FutureTask.java:252)
        at java.util.concurrent.FutureTask.get(FutureTask.java:111)
        at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
        at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:398)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:3 8)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.Main.runBuild(Main.java:809)
        at org.apache.tools.ant.Main.startAnt(Main.java:217)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Caused by: Socket timeout waiting for flexunit report
        at org.flexunit.ant.FlexUnitSocketServer.start(Unknown Source)
        at org.flexunit.ant.FlexUnitSocketThread.call(Unknown Source)
        at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
        at java.util.concurrent.FutureTask.run(FutureTask.java:166)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
        at java.lang.Thread.run(Thread.java:722)
Caused by: java.net.SocketTimeoutException: Accept timed out
        at java.net.TwoStacksPlainSocketImpl.socketAccept(Native Method)
        at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:396)
        at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:183)
        at java.net.ServerSocket.implAccept(ServerSocket.java:522)
        at java.net.ServerSocket.accept(ServerSocket.java:490)
        at org.flexunit.ant.FlexUnitSocketServer.openClientSocket(Unknown Source)
        ... 7 more
Total time: 1 minute 38 seconds
So everything seems to be building correctly now, but not executing correctly. Also, there are still a number of properties that are not being set:
function(){return A.apply(null,[this].concat($A(arguments)))}
report:
Skipped because property 'build.report' not set.
instrument-compile:
Skipped because property 'build.instrument' not set.
package-instrument:
Skipped because property 'build.instrument' not set.
pmdReport:
Skipped because property 'build.pmd' not set.
Where should these values be set and what are appropriate values? What could be causing the socket timeout and what exactly is it waiting for or attempting to accomplish with the sockets?
The end goal is to be able to use the flex SDK, flexunit and ANT on a linux server to automate my build/test process. I am currently just trying to get ANT to work with the flex SDK and flexunit on a windows XP box so I can see what the output should be and how the whole system works before trying to inject it into my CI system.

Forms Builder 6i & 10gR2

Hi,
Whether the forms builder in Oracle 10g and 6i looks the same?Can a person work in 6i forms builder with 10g experience?
What are the major differences?
Please give an overview about that 6i forms builder by comparing it with 10g.
Regards,

Hello,
It is quite 98% the same ! Don't worry about the different versions of the Builder, because the differences are really small.
The big difference is not with the builder but at runtime, because 6i is C/S (even if it is possible to have it running in Web mode), and 9i/10g is exclusively Web mode.
Francois

Could you please recommend a book or two about data warehouse designing?

Want to read some books about data warehouse and how to build or deal with the problems during the data warehousing process.
Anyone could recommend any book regard to this?
I want the book to mainly talk about the common case scenarios in data warehouse area and the general solutions to those scenarios.
I am quite new in this area, so any recommendation would be highly appreciated.
Thanks.

Perhaps also these resources, if you've not already seen them
DW Best Practices Whitepaper
http://www.oracle.com/technetwork/database/features/bi-datawarehousing/twp-dw-best-practies-11g11-2008-09-132076.pdf
Greg Rahn on the core performance fundamentals of Oracle data warehousing
http://structureddata.org/2009/12/14/the-core-performance-fundamentals-of-oracle-data-warehousing-introduction/

Are there any advanced user manual for Application Builder?

Hi,
I want to find Application Builder user manual that can teach me how to set the Install Settings. For example, I want to know what libraries will be included in the installer if I enable Serial Port Support and Port I/O Support. What's the function of Enable ActiveX server in Application Settings? The Application Builder user guide I found which is a 8 pages installation guide with release note. I hope some NI engineers can answer this question. Thanks.
Best regards
Bill

For information about specific options in the Application Builder, click the Help button in the Build Application or Shared Library dialog box. In the Advanced Installer Settings dialog box, you also can click the Help button to display a topic with information about each option in the dialog box. Here are the descriptions of the two support options you mentioned:
Serial Port Support -- Installs the serial portion of NI-VISA needed for applications that access serial instruments or serial port.
Port I/O Support -- Installs the necessary support files for accessing parallel ports and for using the In Port and Out Port VIs.
The description of the "Enable ActiveX server" checkbox is: "Enables the ActiveX server for the application so it c
an respond to requests from ActiveX clients."
These descriptions also have links to more information about the objects mentioned, such as the In Port and Out Port VIs and the ActiveX server.
If this information is insufficient, please email [email protected] with your feedback so we can improve the help topics.
Thank you,
Kelly Holmes
LabVIEW Documentation
Kelly H
LabVIEW Documentation
National Instruments

DBMS_LOGSTDBY.BUILD Seems to Hang

Hi Group,
One step on the logical standby creation is to execute the package DBMS_LOGSTDBY.BUILD, however it has been executing for almost three days and it does not return the sql promt, I read about metalink note 747495.1 DBMS_LOGSTDBY.BUILD Seems to Hang And Does Not Return To SQL prompt which says that package waits for all transactions to finish, so I restart the primary database in restrict mode, so anybody can connect, and execute DBMS_LOGSTDBY.BUILD again during this weekend. The same result, it didn't finish execution.
Any idea about what it could be.
Thanks a lot.

Imran,
The information from alert log file is not sufficient.
Can you log switch on primary and monitor whether it is archiving in standby or not.
and you can monitor the changes in "v$managed_standby"
Also check for the errors using "v$dataguard_status"
SQL> select error_cdoe, message, timestamp from v$dataguard_status where dest_id=<n>;

About PB 12.6 SP00 PL02 (build 4035).

Similar Messages

Maybe you are looking for