About process controler and fork (in workflow)

in workflow whar is process controler and fork?

WORKFLOW
http://help.sap.com/saphelp_nw04/helpdata/en/71/9eaa38bb69b505e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f94b454311d189430000e829fbbd/frameset.htm
http://www.eprintdriver.com/ePrintFileConverter.html

Similar Messages

About process control and fork (in workflow)

what is process control and fork (in workflow)?

Hello Kumar,
Process control is to control the workflow process like you can complete the workflow, make a step obsolete, cancel the workflow, etc.
Fork is something that will give you more than one branch. The fork step gets completed only when the mentioned number of branches are completed. For example you have a requirement for approval and there are 3 approvers and the requirement is such that atleast 2 approvers should approve the request then you will go for a fork of 3 branch with minimum 2 for completion.
Regards
Farzan

Process control and clustering

the document says process control is recommended within a domain. my question how does this work if the domain is clustered. The doc says process control is RMI based. Does that mean it will auto load balance using RMI clustering ? or it will always use only the local server ?

Hello Kumar,
Process control is to control the workflow process like you can complete the workflow, make a step obsolete, cancel the workflow, etc.
Fork is something that will give you more than one branch. The fork step gets completed only when the mentioned number of branches are completed. For example you have a requirement for approval and there are 3 approvers and the requirement is such that atleast 2 approvers should approve the request then you will go for a fork of 3 branch with minimum 2 for completion.
Regards
Farzan

Are GRC Access Control, Process Control and Risk Management separate?

Are these 3 different modules that you have to purchase separately or are they included in one suite?

Hi Anne,
If you are refering to GRC Access Controls 5.3, Process Control 3.0 and Risk Management 3.0 - All 3 are separate.
A new version of GRC 10.0 has been launched which is currently in ramp up. This has all the above 3 in one suite.
Thanks and Best Regards,
Srihari.K

Questions about remote control and infrared port Qosmio F20

Hi again,
My Toshiba Qosmio F20 comes with a remote control funcioning through a infrared device on the front of the computer.
Regarding this I have 2 questions:
1. How do I configure additonal functionality through the remote control? (Like launching and controlling Winamp?)
2. How do I connect other devices, like my cellular phone, pdas etc., to the infrared device on my computer?
Kind regards,
Vegard

Hi,
the Remote Control delivered with the Qosmio F20 is designed only for Windows XP Media Center Edition (all Remote Control's which are designed for Windows XP Media Center Edition work only with Media Center or Windows Media Player). Other program's like Winamp were not supported by these Remote Control's.
I believe, the Remote Control's are made by Microsoft and for a wide palette of product's (the Infrared Transceiver is on nearly all Media Center PC's e.g. Siemens-Fujitsu, the same). So it's a little bit tricky to support more program's then Media Center or Windows Media Player.
For other program's you need a second Remote Control like this one:
http://www.logitech.com/index.cfm/products/detailsharmony/GB/EN,CRID=2084,CONTENTID=9193
br, Ben

HFM Process Control and Process Flow History

Hi,
When I review the Process Flow History for top parent members of the consolidation, the POV shows <Scenario> <Year> <Period> <Entity> <Entity Currency>. For all other applications and entities, the <Entity Currency> member shows but I've built a new application and the <Entity Currency> shows as "EUR Total" (EUR is one of the currencies) except that EUR is not the default currency of application or the entity's value. Could anyone explain to me why it would show that way or where it could be coming from?
I'm using HFM v11.1.1.3.
Thanks in advance.

did you add new metadata?

About Layout control and Image alt text

Can i use normal HTML div tags to control layout ? is it bad practice or not? or i should go for template?
Can anyone please suggest how to add alt text and title to the images(logo) in ADF .

Use af:image for displaying images.
You could specify alt text in shortDesc attribute property of af:image.
<af:form id="f1">
<af:image source="/images/SubbanaSolutions.png"
shortDesc="Subbana Solutions" id="i1"/>
</af:form>For more details regarding af:image, check this:
http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e12419/tagdoc/af_image.html
Thanks,
Navaneeth

GRC AC 5.3 and GRC Process Control on the same server

Hello,
Can we install SAP GRC AC 5.3 and GRC Process Control 3.0 and GRC Risk Management 3.0 on the same box/ same server.
Is there a OSS Note, which talks about having the above 3 components on one box?
Thanks,
Imran

Hello Imran,
1- My 3 question ARE do I need a separate JAVA Stack for GRC Process Control and seperate JAVA Stack for GRC Access Control
-> No, you can have them installed on save Java stack.
OR
Can I use the same JAVA Stack for GRC Process Control & GRC Access Control?
-> Yes, you can. You have to make sure that you are on SP10 or above for Access Control as only then it will support NW Java 7.01.
2- Can I use EP 7.0.1 installed on same server for both GRC PC 3.0 and GRC AC 5.3?
-> Yes, you can.
3- Can 1 single AS JAVA Database contain both GRC Access Control VIRSA Tables and GRC Process control tables at the same time?
-> For process Control the tables reside on the backend SAP as it is webdynpro ABAP application and for access control the tables reside on the Java database as it is java and webdynpro JAVA application.
Regards, Varun

Risk Management & Process controls for non SAP client

Hi Forum Gurus,
I need clarity on the following: Can Risk managment 3.0 and Process controls be implemented for a non-SAP client?
i.e. Our client does not run SAP, but they are interested in RM and PC, so is this possible to implement?
Any advice would be highly appreciated.
Kind regards,
PREVO.

Hi Prevo,
Process control and Risk management 3.0 are delivered within same installation package files so it is same for both the applications .
Also real time agents for Oracle or peoplesoft are avaialble if you want to leverage the automated control functionality of PC 3.0 in non SAP environment.
Remember the automated control functionality is the optional feature of PC3.0.If you wish only to use the manual controls features of PC 3.0 you dont need RTAs(real time agent).
You can find further information about manual controls at http://service.sap.com
use the quicklink '/rkt' then the following menu path: SAP Business Objects for GRC Solutions -> SAP BO Process Control 3.0 -> Technology Consultant
Regards
Debraj

GRC Process Control Architecture

Hi.
I need to find a good documentation about the architecture of the GRC Process Control.
I'm new with this technology.
Any helps to me, please? Thanks

Hi.
Your link brings to Document Builder???
I have a look about SAP BO Process Control and I have downloaded some papers.
I'm searching a document that talks how create the first (and also simple) application with this technology.
My goal is to understand which objects I can use to create the first application, after installing the Process Control.
Can I insert rules and controls and/or can I import these objects from an ERP source?
Any suggests to me, please? Thanks

Oracle BPM Java API - getting informations about process activities

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

Process costs and process template

Hi,
Somebody may help me to clarify these problems:
1. Which exact costs are included in the so-called "Process costs" in PS component?
2. Is process template used to allocate only the overheads collected by costing sheet?
Thanks in advance!

Hi Aluri,
i think ur chain is loading parallelly then after successfully completing both in parallel with "AND" option then after it was loading sequential.
not worry if AND fails, AND option if for after successfull completion of parallel loads, it starts the next process, check r u getting REPEAT option?? then start the REPEAT, hope the chain runs successfull for remaining process.
check in table RSPCPROCESSLOG, RSPCLOGS table
execute the program /ssa/bwt
and logs tab in RSA1, analyze the process.
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
****Assign Points if Helpful****
Regards,
Ravikanth.

SAP GRC Process Control - General Questions

Hi all,
We have the following general questions regarding SAP GRC Process Control:
1) Assume that we have set up 5 different SAP Connectors in Process Control. When you configured a specific rule and control and then, schedule the job for such control, how does the system (SAP Process Control) knows which back-end system needs to be accesed for such control?
2) In which language are the out-of-the box rule steps's script coded? In which different languages can those scripts be coded, what is to say, in which language can we code our own scripts?
3) How is the detailed flow between SAP Process Control and SAP Back-end system?
Many thanks. Regards,
Imanol

null

HTTP 404 Not Found Error in Process Control Mail

Hi All,
I am working on version 9.3.3
I have setup e-mail alerts through a SMTP server.
When I am going on Process control and starting the cycle OR promoting to any level, I am getting a Minimized window showing HTTP 404 Not Found error and Mail is not going.
Whereas My ICP mail alerts are working fine
Please suggest something to resolve.
Regards,
Jai

Hi Jai,
Check the below documents, which might be helpful to you.
Financial Management Error "Server object error ASP 0177 : 80131040" When Sending Email Alerts (Doc ID 830823.1)
Financial Management Error "HTTP 500 Internal Server Error" in Process Management E-Mail Alerting (Doc ID 855942.1)
Process Control Email Alerts Are Not Working For Certain Entities and Entity Hierarchies (Doc ID 1160594.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Jan 30, 2012 7:08 AM

Reg: process control.

hi all
These are all the types which are available under callable object .in guided procedure In this can any one explain what is the purpose of process control and user management callable object.if possible please provide me the documents relevant to the content.
Click to expand
Service Callable Objects Service
Click to expand
User Interface Callable Objects User Interface
Click to expand
Forms Callable Objects Form
Click to expand
Process Control Callable Objects Process Control
Click to expand
User Management Callable Objects User Management
Click to expand
Miscellaneous Callable Objects Miscellaneous
Thanks & regards
DEEPIKA.
Edited by: deepika_indian on Oct 5, 2010 7:38 AM
Edited by: deepika_indian on Oct 6, 2010 11:58 AM

Hi Kumar,
Infact it's a good question.
For this,
In PAI,
after the loop....
in the module, write as follows,
If TCL-current_line = n (n = perticular row number)
leave to 'XXXX' (XXXX is the screen number)
endif.
reward me if useful.

About process controler and fork (in workflow)

Similar Messages

Maybe you are looking for