About project builder wizard!

Hi!
I installed oracle 8i and form 6i. I didn't have any problem in installation and I can use both very well. But when I tried to open the project builder, and when the project builder wizard comes, only "Welcome to Project Wizard" and letters in the buttons are with english and all other words in the screen are with other language which I don't know. Could anybody who know how to correct that, please answer my question. Thank you so much.
SHY

Finally, Oracle Corp. is releasing documentation on its latest version of Forms, called now Oracle9i Forms. To get a better look, access this:
http://otn.oracle.com/products/forms/htdocs/9iforms_fov.htm
Good luck, Jan

Similar Messages

Oracle installer scripts in Delivery wizard is disabled in Project builder

Hi,
I have oracle forms 6i installed on my system. However, I was trying to builld installer scripts for my project. So I open the deliver wizard in Project builder. Select all the parameters, like project name/directory etc.and then when I reach the option of creating installer scripts, it is disabled while the others like,
Deliver to local staging, Deliver to a remote staging etc is enabled.
Any ideas, why I the installer scripts are disabled.?
thnx
S

Soe more.
I read in the Oracle manual under the Guidelines for Building Applications
in the section Managing Your Application the following statement about project builder:
"Remember that you can automate the running of test scripts just as you can automate actions associated with the modules in your application.
How would one do this???
Thanks!
Liza

How can I programmably extract the project build information set in the project build specification. So I can then use the information in an 'About' dialog.

Extracting Project information
How can I programmably extract the project build information set in the project build specification.
So I can then use the information in an ‘About’ dialog.
Dave

In the labview\resource\appbuild folder their are some VI's that can deal with build specs! They return a variant containing the data!
It's the reason I build a variant probe.
Be aware that the build info is not present in th lvproj file of the built executable!
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

New MVC 5 project build fails in Visual Studio Online using TFS

Here are some of the errors I'm getting.
Controllers\AccountController.cs (44): The type or namespace name 'AllowAnonymous' could not be found (are you missing a using directive or an assembly reference?)
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\IdentityConfig.cs (2): The type or namespace name 'AspNet' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
App_Start\IdentityConfig.cs (3): The type or namespace name 'AspNet' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
App_Start\IdentityConfig.cs (4): The type or namespace name 'AspNet' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
App_Start\IdentityConfig.cs (5): The type or namespace name 'Owin' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
App_Start\IdentityConfig.cs (12): The type or namespace name 'UserManager' could not be found (are you missing a using directive or an assembly reference?)
App_Start\IdentityConfig.cs (59): The type or namespace name 'IIdentityMessageService' could not be found (are you missing a using directive or an assembly reference?)
App_Start\IdentityConfig.cs (68): The type or namespace name 'IIdentityMessageService' could not be found (are you missing a using directive or an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\Startup.Auth.cs (1): The type or namespace name 'AspNet' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
App_Start\Startup.Auth.cs (2): The type or namespace name 'AspNet' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
The project builds fine in VS 2013 (since its a new project).
It seems that it is not recognizing all the packages. How do I fix this problem?

It doesn't work for me either. It's an MVC 5.2.2.0 project straight out of the Wizard. It's part of a solution with other projects which appear to be working. I tried configuring NuGet to download missing assemblies on the build machine as it suggested on
some other sites. That didn't help. According to the list of installed software on the Hosted Build Controller, I don't see MVC explicitly listed. (getting-started/hosted-build-controller-..) page in the TFS project site.
It definitely doesn't work. I'm trying out Visual Studio Premium 2013 and Team Foundation Service on the 90 day trial offer. I can't find any mention of an MVC restriction. I don't want to have to include the package binaries in source control.
Edit: I tried a standalone MVC 5 project and it worked fine on the Hosted Build Controller. If you add an MVC 5 project using the wizard to an existing solution with other projects, you get the errors below. So it isn't the Hosted Build Controller.
Strange.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\AccountController.cs (200): The type or namespace name 'ValidateAntiForgeryToken' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (200): The type or namespace name 'ValidateAntiForgeryTokenAttribute' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (226): The type or namespace name 'AllowAnonymous' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (226): The type or namespace name 'AllowAnonymousAttribute' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (234): The type or namespace name 'AllowAnonymous' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (234): The type or namespace name 'AllowAnonymousAttribute' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (242): The type or namespace name 'HttpPost' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (242): The type or namespace name 'HttpPostAttribute' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (243): The type or namespace name 'AllowAnonymous' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (243): The type or namespace name 'AllowAnonymousAttribute' could not be found (are you missing a using directive or an assembly reference?)
Controllers\AccountController.cs (244): The type or namespace name 'ValidateAntiForgeryToken' could not be found (are you missing a using directive or an assembly reference?)
It seems that my working stand alone project has the dlls in the packages folder tree added to source control. Whereas in the composite project, only the corresponding .xml files are added to source control. So with the standalone project, the build server
is locating these dlls and using them.

Problem with project builder

dear friends
i use developer 6i for windows 2000 server
i want to deliver my project
i open project builder and i read the help
the help tells me that i must do the following to deliver my project :
- from file menue choose administration then choose deliver .
i click on file menue then chose administration but i do not find deliver in the menue
would any one help me please

Hi,
Please refer this thread http://forums.adobe.com/message/2551218#2551218 for detailed info about deployment.
-radhakrishna

Project Builder 6.0.5.7.0 woes

Couple of questions....
1. Has anyone used this with Oracle Developer 6i? When I started to put in
all my items then picked tools:delivery wizard, the option to "Deliver
locally and create an Oracle Installer Script" is Greyed out. Any body else
experience this?
2. When I add reports objects (rdf), the node "Reports Builder Document" is
added but no "Reports Builder Executable". Ideas?
THIS HAS BEEN RESOLVED (METALINK NOTE)
3. When I click on Ctrl-T or "Build Selection" button on a form, I get an
information dialog: "No items were built". What's up?
4. When I attempt to open a form, right click and select Edit, it opens the
form and can't find referenced objects (or libraries). Should I be placing
ALL SOURCE in one path, with the project file in there too, and then using a
shortcut to startup Project Builder, or putting the path in the registry??
5. The BUILD option for the module type of FMB says "Convert from Text" and
when I try Edit Type, the build Action "display in popup menu" is selected.
However, if I right click a form builder document, I see NO "convert from
text option". I DO get the CONVERT To Text option (The SCRIPT action).
Ironically, both have the same HOTKEY. (which is also used by "c"opy)
6. Why isn't there simply a "Build"/Compile option?
7. How can I specify a different output directory for the BUILT modules.
They are defaulting to the directory containing the project file? I see
this when I turn on Project: Action Preview
mode, the output_file parameter.
8. Also, if I turn this on and Select a Build all, there's NO WAY to stop ALL
OF THE DIALOGS being displayed for each module - what if I want to QUIT in
the middle of this.
Any help appreciated!
null

Hi Ida
Ensure that your Oracle 9i database instance is up and running.
Also, you must have appropriate settings in your tnsnames.ora for using the Oracle 9i database.
Regards
Sripathy.

How to deliver 2-tier project with Project Builder?

Hi all,
I am playing around with Project Builder and try to deliver form with Delivery Wizard in 6i.
However, I am unable to select the radio button where we ask Project Builder to create installation script. It is gray out.
Am I missing something here? Any tip is appreciated.
Cheers,

Hi Wandeson,
The OLAP products are:
Oracle 9i Release 2 Enterprise Edition, which includes the OLAP option.
Front end:
For custom analytic applications, use BI Beans and JDeveloper. Current release is 9.0.3.
For more details, please read the Business Intelligence Technical Overview OTN:
http://otn.oracle.com/products/bi/content.html
http://otn.oracle.com/products/bi/pdf/bi_overview.pdf
Oracle 9i OLAP:
http://otn.oracle.com/products/oracle9i/datasheets/olap.pdf
http://otn.oracle.com/products/bi/9iolap.html
Hope this helps,
Katia
BI Beans PM

Project Build Installer Properties Slow to load, (Maximum vi size)

I have a LabVIEW Project with 450Mbytes of source code, and drivers. The Project was originality in LabVIEW 2009. I upgraded to LabVIEW 2011.
Now the Project Build > Installer Properties Menu is about 10x slower than was in LV 2009.
I've done a mass compile, resolved all error messages in the Project, yet 2011 is still 10x slower than 2009.
The 2011 Project will build an functional exe, and a functional installer given enough time (like 15 minutes). During that time the computer is locked up, no other applications are functional.
The Computer is XP, dual Core, 2.5GHz, 4Gbytes Ram, 4Gbyte Page File.
The NI Support Desk is saying (quote) >>>> seem that the requirements for LabVIEW 2011 are different than the requirements for LabVIEW 2009 <<<<<
Suggestions ???

Does the procedure take 30 minutes or 15 minutes (first post)? Also, what is it about the installer build spec that requires further modification after you modify your exe build spec? If the exe is included in the installer, the installer build will automatically re-preview the included exe to get an updated list of files to include next time the installer is built. So unless you need to modify something about the installer spec and not the included source files, no edits would normally be required after changing your exe (or other included source files).
Keep in mind, the previewing of the exe will take about as long as it takes to build the exe -- it's computing a list of the files that would be built without actually creating the files. A data point of interest is how much longer it takes your exe to build, comparing 2009 to 2011. Does your exe take 10 times longer to build in 2011? Longer exe build times mean longer preview operations in Installer Builder.
Another thing to check is which distributions you're including on the Additional Installers page. Are more distributions being included in the 2011 build? Did the distributions change significantly in size since 2009?

Doubts about Query Builder tool

Hi!
We are using database link and the developed querys have many schemas.
There is possible to use the Query Builder tool for multi Database schemas? How to do?
There is possible to create query in Query Builder tool using database link? How to do?
I would like to know about Query Builder tool in the our activies.
*If there is more information about it(Query Builder tool) or documentations, please talk to me.
Best Regards,
Priscila Britto

hi.
try this [http://sourceforge.net/projects/sqleonardo/|http://sourceforge.net/projects/sqleonardo/]
maybe it can help you.

What is project builder

Dear all
Can anyone tell me what is project builder (cj20n) i tried a lot to get some material on net and in my city but was unable to find guidance about it .
What are the future prospects for it.
Please send me some material if possible at [email protected]
regards,
Deepak

Hi Deepak,
The Project Builder is a user-friendly method of accessing the Project System,
which enables you to edit your projects quickly and efficiently.
Its clear screen structure, split into three, and the ease with which you can use it,
combine to provide you with a comfortable working environment that facilitates
your daily work in the Project System.
It also provides you with an overview of all the projects that interest you.
Context sensitive menus, Drag & Drop, and the capability to define your own worklist and
templates pool, further accelerate your work with projects.
kindly check the following PDFs on PS:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PS/PS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_PS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCPS/CAARCPS.pdf
Also, check the following links:
http://help.sap.com/saphelp_47x200/helpdata/en/41/4388389f402852e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e4b97462a11d189000000e8323d3a/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/17/7383216a5d42058a08c5c0ba646a04/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d0/19808efbae11d1a5ee0000e82de7c3/frameset.htm
hope this helps!
best regards,
Thangesh

Error in report builder wizard user interface

I am getting error 'REP-31954: Error in the Report Builder Chart Wizard user interface'.
The help subsystem states that I should make sure that the Chart Builder Wizard libraries are properly installed.
I am sure they are because all other wizards work fine, along with the Forms, Reports, etc.
I searched using Google and found two messages that indicate this is a bug in the program and not library installation related.
Does anyone know if this is indeed a bug that has not been resolved, or do I need to troubleshoot more on my end.
I re-linked Oracle graphics and checked the env variables, but nothing gets the Chart Wizard to work within Reports or Forms.
Any help/advice would be greatly appreciated.
Thank you.

Hi.
I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). I am at work at the moment, and I can't recall what the Reports version is. The same error occurs with Forms.
The filename that I downloaded is called 'd2k6irelease2.tar'.
I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
Thank you for responding!

Logical SQL about Expression Builder

Dear all
I am Michel.
When I was always trouble,
everyone will go to support this Forum, I am glad.
I want to fix Logical SQL about Expression Builder of Oracle BI 11.1.1.3.
In detail, Business each year, fiscal year you want to make is to display
the beginning of the fiscal year of April 1, always, the data,
"OUTPUT_DATE" from April until March the following year.
Currently being output error is as follows.
:[nQSError: 22020] Function Subtring ( argument 1) does not support non-text types. (HY000)
I want to fix logical SQL is as follows.
case when substring("app_support"."TABLE_NAME"."OUTPUT_DATE" from 4 for 5)
in ('04','05','06','07','08','09','10','11','12')
then Cast
     Concat
Substring(
               Cast(
                    "app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
          FROM 4 for 8
     '04-01'
AS DATE
when substring("app_support"."TABLE_NAME"."OUTPUT_DATE" from 4 for 5)
in ('01','02','03')
then timestampadd(SQL_TSI_YEAR,-1,
     Cast
     Concat
          Substring(
               Cast(
               　　　　"app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
               FROM 4 for 8
          '04-01'
AS DATE
For reference, logical SQL follows,
there is no error, and it is operating normally.
Cast
     Concat(
          Substring(
               Cast(
                    "app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
          FROM 0 for 5
     '-01')
AS DATE
I will grad to reply message.
Thanks and regards.

Dear Fame and all
Hello.Thanks you for reply.
Hi,
You Missed END key word in the statement.Sorry,I mistake copy & paste only.
So,The problem is still not resolved.
The following shows, that the error has been corrected in the first message.
Dear all
I am Michel.
When I was always trouble,
everyone will go to support this Forum, I am glad.
I want to fix Logical SQL about Expression Builder of Oracle BI 11.1.1.3.
In detail, Business each year, fiscal year you want to make is to display
the beginning of the fiscal year of April 1, always, the data,
"OUTPUT_DATE" from April until March the following year.
Currently being output error is as follows.
:[nQSError: 22020] Function Subtring ( argument 1) does not support non-text types. (HY000)
I want to fix logical SQL is as follows.
case when substring("app_support"."TABLE_NAME"."OUTPUT_DATE" from 4 for 5)
in ('04','05','06','07','08','09','10','11','12')
then Cast
Concat
Substring(
Cast(
"app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
FROM 4 for 8
'04-01'
AS DATE
when substring("app_support"."TABLE_NAME"."OUTPUT_DATE" from 4 for 5)
in ('01','02','03')
then timestampadd(SQL_TSI_YEAR,-1,
Cast
Concat
Substring(
Cast(
　　　　"app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
FROM 4 for 8
'04-01'
AS DATE
end
For reference, logical SQL follows,
there is no error, and it is operating normally.
Cast
Concat(
Substring(
Cast(
"app_support"."TABLE_NAME"."OUTPUT_DATE" AS char
FROM 0 for 5
'-01')
AS DATE
I will grad to reply message.
Thanks and regards.

Non-Display of attached word document in Project builder

Hi,
I am not able display / view the word document attached to the WBSE in the Project builder. We are not using DMS for keeping documents. Please suggest to fix the issue.
Thanks & Regards,
Ranjan

Hi,
Thanks for your reply. I am assigning the document to the WBSE and that time it is asking for path of document to be attached. I am assigning the document from my local machines.
While opening the document or displaying, system is showing 46.080 bytes tranfered & no document. However if i will attach excel file there is no issue on that.
Could you please sugegst on this.
Thanks & Regards,
Ranjan

Last projects processed in Project Builder

Hi Experts,
I found these communication which our industry also required this enhancement in project system and Mr.Rakesh Pradhan haven't gave us in full details information. Can I request both of you guys to provide more detail information to us as well. So that we can ful fill these requirement here as well ,-
Hi experts,
We all know that the last five projects processed using the project builder will be stored in the worklist of the project builder. Currently this is a standard SAP functionality where the processed projects are stored under the userID
My question:
1. Is there a way to increase the number of projects in that list?
2. Where these informations are stored? I know that this is userID specific but dont know where.
Any input is welcome.
FATMAN
Hi,
We can increase the number of Projects last processed from 5 up to 20. This can be done through enhancement Package-3, Project Systems enhancements. Please refer the document available in SAP service market place.
Please let me know if you need any details on this.
Hope this will help you.
Regards,
Rakesh Pradhan
Thanks and Regards
Kannika

Hi Kannika,
The enhancement package is for ECC and not for 4.7.
There is another way to increase the number of last projects processed in the transaction CJ20N using ABAP program modification.
In the functional module CNPB_W_UPDATE_HISTORY, line number 109 you have to increase the index from 6 to what ever number you want. I think it can go upto 20 projects.
Beware!!!!!!!!! This is standard SAP program modification.
FATMAN

How to change company code in Assignment tab (CJ20n-project builder)

Dear All,
Is there any config to maintain company code in assignment tab (project builder) ? We have a problem in our project. It shows that in basic data, user put company code A (in basic data) but in Assignment tab they put different company code let say B. When we do settlement , two accounting document created to company code A and B. By right it should be only company code A. In addition, we cannot change the company code, when the status is already Release (REL).
Please help how to change the company code B to A and how to reverse the accounting document that has been created under these two accounting document.
Thank you.
Best Regards,
nies

Now I understand your scenario, you have the Requesting Company Code and the Company Code Different.
You usually use this primarily with IM module if you want to manage the asset under construction (cross company) belonging to a different i.e., company code (Requesting ) than company code on main WBS.
You can not change the company code (Assignment Tab) as you already have actual posted against it.
You've also created an AUC (in wrong company code) and even if you reverse the settlement you would not be allowed to delete the AUC or the delete the settlement rule (its grey out as its already used)
What I can suggest is to reverse the settlement, lock this WBS which was created wrongly, create a new WBS and then continue with you regular process.
Above are my views but you can expect views from others.
Regards
Sreenivas
Please close the post if satisfied.

About project builder wizard!

Similar Messages

Maybe you are looking for