About QOS Settings with WRt120N router~HELP~

I have a question with the QOS settings, after I set the Priority for my 4 devices via MAC address, including 1 xbox, 2 notebooks and 1 PC with usb wireless adapter. Xbox has the high, and the others are medium. Here is the problem, after I activate the QOS settings, the network on the 2 notebooks and PC is slow.Not entirely slow, but when I try to open a web page, it takes longer time.About the XBOX,I am not sure about its reaction. Please help me out.

Well as you have setup a High Priority for your XBOX under QoS, whenever your XBOX is turned On, Your Router will provide a Maximum Bandwidth of your Internet to your XBOX and it will slower down your Other Devices on your Network.
As you have so many devices in your Network, so i would suggest you not to use QoS Serivce... Or else if you want to use it then you can Turn Off your XBOX whenever you are going to use other Devices ( Computers).

Similar Messages

I can't see DirectTV NFL ticket online. Received message about firewall settings. Can anyone help?

Having trouble seeing DirectTV NFL ticket online. Received message about firewll settings. Can anyone help?

What was the message?

HELP! Can't save QoS settings on WRT120N!

I accidentally removed Ethernet 2 under my QoS list. So I tried it again.
Under QoS, I'm trying to prioritize Ethernet 2 to "high", so I added it to the list. When I click "Save Settings", the page loads and Ethernet 2 isn't saved on the list.
Help? My PS3 is connected 2 Ethernet 2 and now I LAG like crazy!

Try to reset the hard-router for 40 seconds,power cycle the router and try again...Also,reduce the MTU size on the router to 1365.

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Airport Express not working when used with Broadband Router **HELP!!!**

Hello.
I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
Is there a way to configure the router to see the AX?
Thanks for your help!

Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
Hope this might help someone.
Michael
iBook G3 (600 MHz) Mac OS X (10.4.3) D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

No luck with WRTU54g Router - help please

My brother recently purchased a Linksys WRTU54g router and it came today, we were told that we could connect to the internet through this by connecting to our BTHomehub wirelessly and therefore can then plug an ethernet cable from our xbox 360 into the linksys router and connect to xbox live.
However after hours of trying we have had no luck, any help would be greatfully appreciated.
Thank you.
Danielle.

1. If you already have a Wireless Router then you need to connect your existing router from the Ethernet Port on Internet Port of the LInksys router...
2. Connect a computer to the Ethernet Port of the Linksys Router and open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...
Leave username blank & in password use admin in lower case...
3. On the set-up tab, change the Router's IP Address to 10.10.10.1 and click Save Settings...Once you are done wait for 30 seconds and unplug the power cable from the router and wait for another 30 seconds and plug it back in...Your router should be configured for Internet Access...
4. You can then connect your xbox to the linksys router and it should work fine...

Can't browse network with new router - HELP!

My old WRT54G died a few days ago. I replaced it with a WRT54GL which was the closest match. Since installing the new router I can no longer browse my network. I configured the new router with LELA as per the instructions suggested. Could that have changed something? All the machines can get on the internet and I can ping all the machines through the command line but when I try to look at the workgroup in the my network places window I get an error message that says:
"Workgroup not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found."
When I run the net view command in the command line that also results in an error.
When I hook machines together with a crossover cable everything works fine so I have to assume it's some setting in the new router that is preventing the browse list from working. Here's what I've tried:
Turned off firewalls both on the local machines and on the router - made no difference
Made sure all machines are in the same workgroup - they are
Made sure browser service and the peer networking services are running - they are
Made sure all machines are on the same subnet - they are because they can ping each other
Now here's something really strange. When I rename the workgroup on all machines they can see each other. Once I switch back to the name "workgroup" they can't see each other any longer and I get the error message.
I run a small business and need to share files quite often. I would love to be able to get a NAS server but I can't find any that will work with ALL of my machines. Most of my machines are running Vista at this point but a few are still XP Pro. One of my machines is XP Pro and cannot run SP2 which prevents a lot of newer software and devices from running on it. This is why I really need to get my file sharing ability back.
Any help is greatly appreciated.
Mike
Solved!
Go to Solution.

I solved the issue and wanted to post it in case someone else has the same issue. One of the machines uses a Linksys WGA600N Dual Band Gaming adapter as it's wireless adapter. Technically speaking this actually a bridge. I needed to restart it. That solved my issue.
Mike

Intermittent Connection with WRT120N router

Hi, I recently bought a WRT-120N router a week ago for my friends and I to use the internet wirelessly. The package I got supposed to give me speeds up to 25Mbps but I can only access these speeds when I'm directly connected to the router via a cable. When I try to connect wirelessly the connection cuts off every 5 mins or so and the speed is less than a fifth of what it's supposed to be even when my computer is the only one on the network. I want to be able to allow everyone equal access to the full speeds when connected wirelessly and not have it cut off every 5 mins. Also, the wireless internet seems to work better for everyone else when I'm connected using the cable but I want to have it in such a way that even when I'm not there everyone can still access the full speeds. I've tried changing the channel for the router and changing the default i.p. so far. Please help. Thanks in advance.

It seems that the wireless connection might be dropping on your router.
Try to upgrade/re-flash the firmware on the router. Download the latest firmware of the router from the Linksys website.
While upgrading the firmware of the router, your computer must be connected to the router with the Ethernet cable.
Open the router configuration page. Go to the Administration tab and click on Firmware upgrade sub tab. Browse the Firmware file that you have already downloaded on your computer and upgrade the firmware on your router.
After upgrading the firmware of the router, it is recommended that you should reset the router and reconfigure the router.
Press and hold the reset button on the router for 10 seconds. Release the reset button and wait for 10 seconds. Power cycle the router. Now reconfigure the router.

QoS Settings

Team - I'm looking to ensure I get the highest quality on my Skype calls. I have an ASUS RT-AC66U router which is BLAZING fast but want to I get the best quality on my Skype calls. Does anybody have any info about what protocols I need to prioritize or info on how to ensure I maximize the QoS settings on my router to get top speeds for Skype? Thanks, Jason

my 2 cents: 1. I believe Skype packets don't want to be identified, because this can lead to some sort of sabotage by telecoms / admins. 2. People don't know how to do QOS in Skype (because Skype doesn't want they do this), but the community mecanism forces them to always answer (to get more kudos), so they will reply with unhelpful answers like: "QOS is useless", "try to do with DMZ", but this is not what you are looking for. 3. In technology everything is possible, but sometimes only with hard efforts. I don't know how to do this in Skype in a easy way, but maybe you can force Skype to use a specific IP (by using the proxy setting or using Skype in a virtual machine) and configure your router to do QOS with this specific IP.

Help!! Cannot connect to router settings with IP address

I am trying to access my router by typing http://192.168.1.1 into safari but keep getting the message "Safari could not open the page “http://192.168.1.1/” because the server stopped responding."
Can't understand why this is happening as it is definately the correct IP address.
Can anyone help??
Many Thanks

Then that means you Mac is perfectly communicating with the Router. Just to check open Network Utility and Ping to your Router 192.168.1.1. If you get a reply/responce back then of course that means it does communicate. If you try Safari agin and it does not connect then shut down your mac for 5 min and unplug the electrical cord of your router for 2 min and replug and start your mac. Sometimes there can be electrical "glicthes"

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Connection problems with WRT54G Router PLEASE HELP!!!!

Hello all,
Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

Check the IP address of your computer and see if it's in range with the router's IP.
To learn how to do so, click here.

Need Help with Linksys router broadband-b

I have a Linksys wireless-B broadband router for some reason it just went crazy on me. My wireless card is a wireless - G . Now when i had Verizon DSL i got this router and a USB wireless adaptor from verizon. I had the usb adaptor on my wife computer and the router and modem on my notebook for six months we had there dsl service until we moved to a nother city. Once we had all of our service's transfered to the new home we could not get verizon DSL there.
So for a nother six months we had to use dial up and being that we run a home business dial up was just not up to the task. Well we got rid of dish network just to get cable T.V. just to get the cable broadband service. That's when i got a wireless card for my notebook anyway for six months the network was working just fine with the router and my wireless card.
Until Sept this year just a few weeks ago the router started going crazy. Before my note book was config for windows to connect linksys was connecting and i would see all conection in the site survey, and my own network also. Until a few weeks a go my network would not show .
So i call linksys the have me download some up dated firmware that would not install on my notebook or my wife computer after being on the phone for hours with linksys they come to tell me that the router is ok and working alright after all the test and steps they took me through with the router. Linksys tells me that there is something wrong with my PCM slot on my notebook or either my linksys wireless card. Ok First of all i can pick up signal on other networks and go on line like the Hilton Hotel when i go in there parking lot, Second i can pick up othr networks and get on line that are not secured sometimes so this tells me that there is Nothing wrong with my PCMI slot or the wireless card.
Now i took my router across the street to a friend house and guess what he gets a signal off the router with his notebook but i can not and when we plug the router in the AC outlet the internet light was flashing like crazy and my wireless card was not even in my notebook so that tells me that someone close was pulling signal off my router but i cant.
Can someone please explain this to me i want to get another router wireless - G this time but if there is something that can be done to get this one working like it should that would really help.
The Notebook has been checked out and config and that works well when i hook the either net plug in from the modem the router was config as well but i just can't get a connected to the router when i use the wireless card.

Yes press and hold the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Now connect to 192.168.1.1 username blank, password 'admin'. Now try.

I hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or d an event a window would pop up and sa

i hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or add an event a window would pop up and say "event can't be saved" or "no calendar chosen" or something like "this event doesn't belong with this calendar" and stuff like that.
can you please help me fix this?

You could repartition your drive to have a different OS X with the older iTunes there, and the newer iTunes on the existing partition. Back up everything beforehand. See Kappy's advice in this thread. Partitioning my Hard Drive

About QOS Settings with WRt120N router~HELP~

Similar Messages

Maybe you are looking for