About qRFC Monitor (outbound queue)

Hi Experts,
we are upgrading the r/3 system from 4.6 to 4.7 and i am responsible for BW activities, i was asked to take care of the outbound queue what does that mean? and what needs to be done with this queue during r/3 upgrade? and there are some queues(in SMQ1) with destination None and entries 1 what are those???
Does any one have the check list what needs to be done on the BW side during R/3 upgrade?
Thanks in Advance.

all the guides can be found on sapnet
https://www010.sap-ag.de/instguides
the particular guide for your particular upgrade is THE place to look for help. it's very detailed w/ links to all the oss notes you need to review as well.

Similar Messages

QRFC Monitor (Outbound queue)

Hello friends,
I have to delete and fill up the setup tables for the application 18. I have successfully deleted the data from the setup tables in LBWG. But when I am going to delete the entries in extraction queue(LBWQ), I find two queus for application 18. They are MCEX18 & MCEX18_1. Could you pls let me know the reason for the 2 entries. Should I delete both? Same is the case for allication 17.
Thanks in advance.
Vishwa

Hi,
The entries in LBWQ are those which have only been captured in outbound queues and have not reached RSA7. It is absolutely normal for them to have destination as NONE.
Go to SMQ1, and execute, there you would find multiple entries for application 18
e.g.
Queue Name                                   Destination                      Entries
BWXXX2LIS_18_I0NOTIF               BWCLNTXXX                      100
BWXXX2LIS_18_I0TASK               BWCLNTXXX                       200
MCEX18                                         NONE                                   2000
The first two entries here are the ones which have already been processed from outbound queue to RSA7. Therefore now they have destination as BW system.
Please check if here you get entries for 2 different BW systems. This may be the reason for 2 entries MCEX18 and MCEX18_1 in LBWQ.

QRFC Monitor (Outbound Queue) Destination

Hi Experts,
In t-code SMQ1, there is no destination defined for the queue name "MCEX03". Although there are LUW entries in the same table column, but no records in rsa7.
How can we input the destination name? Please advise.
Regards.

HI,
MCEX jobs doesn't show any Destination as this job will process the LUW entries of extraction queue....
i.e there'll be corresponding job running in SM37 for MCEX jobs periodically when this is successful the LUW entries from extraction queue will processed to delta queue i.e RSA7.
For eg: if u chk the log of that particular job it'll show the no of LUW's entries moved from extraction queue to Delta Queue for that applciation component, in this case it is '03'.
After every successful job if u monitor closely, the count of MCEX will be reduced and the count in Application component '03' will be increased.
rgds,
Edited by: Krishna Rao on Aug 15, 2009 5:30 PM

QRFC Monitor(Inbound Queue)

Hi Group,
Can any one please explain the purpose of qRFC Monitor, i mean from this what inforamtion we can monitor, and when this queue is filled..............
Thanks in Advance,
Regards
Ramakrishna Kamurthy

If youhave a look at this, it might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/0b/80f83b0255a206e10000000a11402f/frameset.htm
Assign points if useful

QRFC Monitor in R/3

Hey friends
What is the transaction to go to the qRFC Monitor ( Outbound Queue ) in SAP R/3 system ?
thanks

Hi,
SMQ1 is the Tcode.
With rgds,
Anil Kumar Sharma .P

Monitoring qRFC outbound queues

Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?

Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan

QRFC and tRFC outbound-queue

in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?

Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla

QRFC Outbound queue errors

Hi All,
I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
The status is "SYSFAIL " .
Can anybody tell me how to solve them.
Regards,
Anindya

HI Anindya,
It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
Reward Points if helpful
Cheers
Manohar

Why XBTO* is visible in inbound queues monitor if it is an outbound queue

Hi all,
why XBTO* is visible in inbound queues monitor if it is an outbound queue?
Any help will be really appreciated.
Regards,
Ivá

Similar question...
XBTO and XBTS Queues

QRFC outbound queue

Hello all,
In the outbound queue of a R3/ECC system, I find messages with status as "Message edited in the target system".
What could be reason for this and what is the work around to solve this problem ?

Hi,
Did you get resolutoin to your problem here? We have BI queues in ECC which have been running just fine for over a year now and out of no where this just started happening to one of our LO extraction processes in ECC. We have raised our issue to SAP but at this point can not find any notes pertaining to this type of message being in a ECC outbound queue for BI.
thanks

SMQ1 outbound queue

Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.B

Hi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh

Qrfc Monitor

Hi All,
when activating the integration models i receive the message Outbound Queue blocked in a dialog box , In the dialog box i have three options 1. Qrfc monitor , 2. Ignore and 3. Cancel. when i click qrfc monitor , i can see a status SYSFAIL.
how I can i proceed with issue now , how can i release the block in the queue,
becoz whenever i activate any of the integration model , I receive the same error
Outbound Queue blocked in a dialog box .
Thanks
Shan

Hi Shan,
In SMQ1 (Outbound Queue Manager) put in the appropriate Queue Destination and Execute F8. This takes you to next screen - where all the stuck queues/blocks are listed. You need to select each and either double-click on the queue name of press F7 (Display Selection) which takes you to next screen.
This screen shows more details of the queue. You can try selecting the queue block and click on the Matchstick icon F6 (Activate Queue). If there are multiple entires in the queue block then you can doubleclick on the queue name or F7 to list the inidividual queues. Select the queue which says SYSFAIL and try fixing the root cause before you select the queue and press F6 - Execute LUW. Please note unless you have fixed the root cause of the queue you can not process it. It will continue to give you the error.
Also when you are trying to activate the integration model and getting the error - try selecting the Ignore option and see what happens. Sometimes the stuck queue is for something else than what you are trying to transfer and system by design flags it when you do the integration model activation.
Hope this helps. Do provide further details like the type of queue stuck, the integration model you are trying to activate if you continue having the problem. Screenshots are preferable - but then not sure how you can put them here.
Thanks,
Somnath

QRFC monitor activate scheduler

Hi
Can anyone explain me the use of qRFC monitor in R/3 system,what is the use of activate scheduler in qRFC monitor?
and if i do that what effect it will have on tRFC queue ?
Sonal...

Hello Sonal,
The Qout sheduler is fot outbound queue. The activation is required for
any blocked queues. Please refer to following help urls to gain further insight.
http://help.sap.com/saphelp_nw04/helpdata/en/15/0eff40e39ba854e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4c/cf5c3c3b067331e10000000a114084/content.htm
Hope this helps.
Regards,
Asit Ramteke

Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

In SMQ1 (qRFC Monitor) status

Hi,
In SMQ1 (qRFC Monitor) I have status 'NOSEND'. In the table TRFCQOUT, some entries have the status 'READY', others 'RECORDED'. ARFCSSTATE is 'READ'. What do these statuses mean? Which values in the field 'Status' mean what and which values are correct and which are alarming? Are the statuses BW-specific or generally valid in qRFC?
Thanks,
Pradeep

Hey pradeep,
Don't post the interview question over here.
Table TRFCQOUT and ARFCSSTATE: Status READ means that the record was read once either in a delta request or in a repetition of the delta request. However, this does not mean that the record has successfully reached the BW yet. The status READY in the TRFCQOUT and RECORDED in the ARFCSSTATE means that the record has been written into the DeltaQueue and will be loaded into the BW with the next delta request or a repetition of a delta. In any case only the statuses READ, READY and RECORDED in both tables are considered to be valid. The status EXECUTED in TRFCQOUT can occur temporarily. It is set before starting a DeltaExtraction for all records with status READ present at that time. The records with status EXECUTED are usually deleted from the queue in packages within a delta request directly after setting the status before extracting a new delta. If you see such records, it means that either a process which is confirming and deleting records which have been loaded into the BW is successfully running at the moment, or, if the records remain in the table for a longer period of time with status EXECUTED, it is likely that there are problems with deleting the records which have already been successfully been loaded into the BW. In this state, no more deltas are loaded into the BW. Every other status is an indicator for an error or an inconsistency. NOSEND in SMQ1 means nothing (see note 378903). The value 'U' in field 'NOSEND' of table TRFCQOUT is discomforting.
Hopefully this is the correct answer that u were looking for your question
Thanks,
Om Ambulker

About qRFC Monitor (outbound queue)

Similar Messages

Maybe you are looking for