About RG 23D register

Hi
Can one let me know how the RG 23D register works
How the RG 23D gets updated
What are the movements to get updated
what re the settings in spro
Sunil

Hi,
If your plant is depot, then it'll update RG23D, In SPRO, maintain it on plant level setting,
PATH - Logistic General- Tax on Goods Movement-India-Basic setting - Maintain Plant setting
Tick on Depot.

Similar Messages

Wrongly captured in our cenvat invoice and RG-23D Register

Hi Users,
I am facing a problem in CIN- where Excise details are wrongly captured in our cenvat invoice and RG-23D Register can anyone guide me the possibilities of errors, ASAP Please............
Tahnks & Regards
Siva

I have already done that. Paking indicator has also been maintained in the J_1IRG1 as well. I have executed the note as well. Its not that the values are not flowing. It is
for instance
Opening Balance     Quantity Manufactured         TOTAL     REMOVALS
                                                         Quantity     Value
0                                  100                    0     0     0
0                                  100                    0     0     0
0                                  100                    0     0     0
0                                    0                    0     10     0
0                                    0                    0     10     0
If you see above the opening balance in the second line item should be 100 and third should be 200...
Also the removals qty are reflected ut not value. Pls explain. The problem kin the closing balances is of the same type.
regds
Jude
Edited by: jude xavier on Jun 4, 2008 2:51 PM
Edited by: jude xavier on Jun 4, 2008 2:56 PM

I lost my ipad a few days ago, is it possible to find it? and how do i go about it. i registered it already.

I lost my Ipad somedays ago. Is it possible to find a lost Ipad that is being registered?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

About the purchase register

Hi,
can anyone send me the purchase register .
my requirement is as follows
miro no, miro date, po no. po date party code, gl no,
taxes are : basic price, excise duty, ed. higher cess,freight, vat12% vat8% cst4%
thanks
Dinesh

hi dinesh ,
check out t-code J1I2
regards,
praful

HT2534 Ask other users about this articleady registered my self for ITune but while downloading Apps its asking for credit card details when i select none it is saying invalid details

hi All, i have registered my self for Itunes despite of which am not able to download anythign it says enter card details am not able to select none option. phone is bought from UK

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

VAT-Purchase Register

Hi Experts,
I have got requirements for a user about VAT purchase register.As I am new to this module....
Can u please provide me some sample code or any other info. on this....... the details are some thing like this.....
Internal document reference no. Internal document date Inventory Type PO number PO date Vendor Invoice no. of vendor Invoice date Invoice amount VAT registration No. CST registration number State in which Vendor is registered Value of purchases from out of Gujarat State against C form Value of purchases from out of Gujarat State - other than C form Value of purchases from Gujarat State Import Purchase from unregistered dealer

F.12 or S_ALR_87012357 , Hope this reports may fulfill your requirements.

Tables used in sales tax register report

hi
could you please give details about sales tax register tables and relevent fields.
thanks

Hi!
If you mean the tax conditions, they are stored in the following tables:
A003
A080
A086
A087
A088
A094
Or the tables, containing the taxes within a sales order or invoice are
KONH, KONP
Regards
Tamá

Question for register Oracle agent inside Zone

Hi All,
There is a question about register an Oracle agent inside zone:
Let�s say S1, S2 be the global zone for the hosts of a pair of Sun cluster, and zone1, zone2 as the non-global zone respectively.
Zone1 and zone2 with the zone path /dbzone, and the oracle binary is installed in zone1 and zone2�s local disk, with path /home/oracle/10.2 as the ORACLE_HOME.
Therefore, the corresponding path to the host S1 and S2 is /dbzone/root/home/oracle/10.2.
And when we register the Oracle HA resource, with input the oracle home as �/home/oracle/10.2�, it will prompt that the directory is not contain required Oracle file.
And if we change to �/dbzone/root/home/oracle/10.2�, it will prompt with error when create resource, with the message, S1:zone1, path �/dbzone/root/home/oracle/10.2� not exist.
We currently to solve the problem by moving the oracle binary to SAN disk, with mount point name �/u01/oradata/portal/oracle/10.2� on the both global and non-global zone.
I would like to ask that is there any missing syntax or any document about how to register ORACLE_HOME inside zone�s local disk?
Thanks,
Cheung

Cheung,
You probably haven't got the init<SID>.ora file in both ORACLE_HOME/dbs directories or something like that. Have a look at /var/adm/messages on both these zones and the global zone and see if there are any more hints as to what is missing.
Regards,
Tim
---

How to register InfoView licenses as the incremental purchase?

Hi all,
I am in charge of the report development for an internal project by Business Object XIR2 for the company and get confused about how to register the product keys for more InfoView users.
There are a number of InfoView users for the next release for our reporting system, so we bought a dozen of licenses from BO company. When I recieved the Delivery Note I was quite strange by how to proceed in the CMC.
Item: 51-00636-085 SAP Temp Key Letter V3
Is this a slip containing the prerequisite information for next operation or this should be received as a email with the necessary temporary keys?
I have found this item in the product package and I am not aware of how to do then.
Thanks in advance for the assistance.
Regards,
Joshua

Hello Joshua,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

M Series Counter TC interruption and Gi_Status_1 register

Hello everyone
Q1: About the G0_Status1 register
Everytime I get TC interruption from a board, checking the G0_Status_1 register.
And I could find bit 12 is always TRUE and it is even when TC doesn't hit to 0.
The 660x RLP Manual says the bit 15 is G0 Interrupt and bit 3 is TC interrupt and
I'm sure it working correct. But I don't know why the bit 12 is always TRUE.
Could anyone tell me what the bit 12 is?
Q2: About TC interruption
Also, I could make the TC interrupt count down direction and when it hits to 0.
If there is some configuration the direction inverted, I would like to know how to
do it. I mean it is something like that the Counter0 counts up and when it hits to
specified value, TC interrupt occurs.
Thanks in advance
Ash

Hi fmhess-
I created an example recently for DMA-based buffered period measurement. It's attached as gpctex6.cpp and should be a good starting point (along with gpctex1.cpp from the M Series MHDDK) to get buffered edge counting with DMA working. This should give considerably better performance than interrupt-based transfers; will DMA-based transfers (using the MHDDK's DMA library) work for your app?
Thanks-
Tom W
National Instruments
Attachments:
gpctex6.cpp ‏12 KB

NI PCIE 6259 Register Map

I need to write a custom driver for this board. Does anyone know where I can get a regsiter map?

I had already downloaded DDK and found the Register Map document. At a minumum this is what I need but I thought the information was on the little light side. It would be nice to have some descriptions for the registers and their bit fields. Also, the "M Series Register Map" is a Preliminary document. Any idea when the next version will be available?
I did not find any information about board specific Register Maps so I assume that this map is good for all 'M' Series boards.
I was hoping to find something like the "PCI E Series Register-Level Programmer Manual" at: http://digital.ni.com/manuals.nsf/websearch/5978CE4A83119E50862566FA0075F424 .
Reading through the posts it seems that there is a lot of differences between the 'E' and 'M' series mulit-function DAQs so
Thank you for the reply.

What about all this spam on iphone!

Help! I have a great filter system on my mac and all spam hits the bulk mail folder for deletion, however, on my iphone I spend most of my time deleting spam messages manually. I have been to apple store with no success - they say there is no way to keep the spam out. I think that there must be a way! Suggestions please!!

RonAnnArbor:
You prove my point beyond even my expectations.
I said the additional SPAM was not a result of the iPhone.
I also do not think that it is even part of AT&T.
What I said is that is is interesting that my email SPAM has reached a magnitude higher than I ever experienced since registering my phone approximately 35 days ago.
You merely fortified what I said by telling me that your SPAM has doubled/tripled in the last 30 days. Makes me wonder where all of this SPAM is coming from since I registered my iPhone. Hackers!!! - Hmmm!!! Somebody selling a list of new iPhone users. Not a coincident at all. Think about when you registered your iPhone and when you started getting double the SPAM.
As I said I have been using AT&T for cell phone service for over 12 years and never experienced as much SPAM as since I registered my iPhone.
mikeab ;(

How can i register my ios with apple id

Beste Apple Support,
Ik heb een macbook Pro (oude model) met lion ios erop. toen had ik geen apple id nodig om het apparaat te installeren, ik heb het ios nooit bijgewerkt. nu mijn ios niet meer werkt, heb ik de laptop door middel van fabriek instelling proberen in te stellen. dit lukt niet. ik krijg een foutmelding dat ik mijn apple id aan de toestel moet koppelen. ik heb van u collega begrepen dat ik mijn apple id eraan moet koppelen. kunt u dat in het systeem koppelen zodat ik gebruik kan maken van de fabriek instelling? zo niet wat kan ik verder doen???
Met vriendelijk groet
Dhafar Al fartousi
casusnummer: 541669361

The one year standard hardware warranty comes with iPhone. No registration required.
If you have purchased AppleCare Protection Plan (APP) or AppleCare Protection Plan Plus (APP+) during the purchase of your iPhone, it is Auto-Registered if you purchased it at the Apple Retail Store or Apple Online Store.
If you purchased the boxed APP or APP+ from Apple or any reseller, you will need to go to supportprofile.apple.com and sign in with your AppleID username and Password.
You will need to register your Serial Number (found on iPhone Box or in Settings>General>About) and then register your APP or APP+ with the slip of paper that came in white box with the red Apple Logo.
Hope this helps!

HT1688 how can i register my phone with apple to obtain my 1 year warranty

how can i register my phone with apple to obtain my 1 year warranty

The one year standard hardware warranty comes with iPhone. No registration required.
If you have purchased AppleCare Protection Plan (APP) or AppleCare Protection Plan Plus (APP+) during the purchase of your iPhone, it is Auto-Registered if you purchased it at the Apple Retail Store or Apple Online Store.
If you purchased the boxed APP or APP+ from Apple or any reseller, you will need to go to supportprofile.apple.com and sign in with your AppleID username and Password.
You will need to register your Serial Number (found on iPhone Box or in Settings>General>About) and then register your APP or APP+ with the slip of paper that came in white box with the red Apple Logo.
Hope this helps!

How to arrive the Receipt amount total same as receipt register

Hi All,
The client have a requirement to find the total amount of the receipts for a month. there is a small indifference from the total arriving in receipt register and the query we have written. can any one say on what condition we can arrive the receipt amount same as receipt register.
we are in 11.5.8 version
the query we used to find the receipts
SELECT TYPE, currency_code, customer_number, functional_amount
FROM ar_cash_receipts_v
WHERE gl_date BETWEEN TO_DATE (:p_from_date || ' 00:00:00',
'DD-MON-YYYY HH24:MI:SS'
AND TO_DATE (:p_to_date || ' 23:59:59',
'DD-MON-YYYY HH24:MI:SS'
AND receipt_status NOT IN ('REV', 'STOP')
UNION ALL
SELECT TYPE, currency_code, customer_number,
(-1 * functional_amount)
FROM sona_ar_cash_receipts_v
WHERE reversal_gl_date BETWEEN TO_DATE (:p_from_date || ' 00:00:00',
'DD-MON-YYYY HH24:MI:SS'
AND TO_DATE (:p_to_date || ' 23:59:59',
'DD-MON-YYYY HH24:MI:SS'
AND receipt_status = 'REV'
Regards

Well, what I did is use the an actual Oracle form - Receipts Summary inquiry form. I inquire on what I want to find on that, then can export from there to excel. Then I would start with the AR_CASH_RECEIPTS_ALL table as my starting point for data. This will contain both Cash Receipts and Miscellaenous Receipts, so you have to be careful in your data selection, depending on what you want to compare against.
Another possibility is to use this report to reconcile against - Oracle Deposited Cash Report - Applied Detail. Now this is based on deposit date rather than receipt date, so that could be a problem.
If I remember correctly about the receipts register, it is distributions (G/L date) based. So it includes reversal activity for receipts that happened in a prior period, and will include receipts that are reversed in a later period. That is why your amounts are probably off a bit.
As usual, you have to test carefully to make sure you end up with the correct data.
So a couple of things to consider.
John Dickey

About RG 23D register

Similar Messages

Maybe you are looking for