About Screen - Hardware (in Settings)

Storage and Memory is displayed with "NaN GB" or "NaN MB" !!
The same when opening Documents. PlayBook never shows the file size!
Solved!
Go to Solution.

Solved. Change language to english and then do a normal restart!

Similar Messages

Changing heading in Settings "About" screen

On my Ipod Nano, under "Settings", on the "About" screen, the heading comes up as "user's Ipod". I want to change this to my name, but don't know where to go about doing so. Does it have something to do with the way I registered?
Thanks for any help

Hi springahh,
First off, try restoring your iPod. For instructions on how to restore an iPod, see this Knowledge Base article:
Restoring iPod to factory settings
If restoring doesn't seem to help, then let's try reformatting your iPod to FAT32, followed by a restore in iTunes:
1 - Connect your iPod to your computer.
2 - When iTunes has finished syncing with your iPod, open "My Computer".
3 - Right-click on your iPod, and click on "Format". (If your iPod is not showing in My Computer, make sure that disk use is enabled in iTunes).
4 - Here, verify that your formatting settings are "Default", with the format type set for FAT32. Also, make sure that "Quick Scan" is not selected.
5 - Then, click on "OK" to begin the formatting process.
6 - When this is complete (it might take a while), make sure to restore your iPod in iTunes again, so as to properly reload the firmware back onto it again.
Any success?
-Kylene

STUCK in About Screen

Help
my playbook is sort of stuck. Basically i can swipe and take pictures etc, but in the settings screen, it is stuck on the About screen.
i cant do anything else in the settings menu.
i tried the already mentioned reset, by holding down the power button for 10-15 seconds.....and nothing happens.
if i try to turn it off from the power button in the main menu, it just sits at a black screen
i wonder if my power button is screwed. i dont really feel it move, but still i hold my finger on it for over 20 seconds and nothing happens
thanks in advance for any help
"[b][URL=http://www.rsoutlet-4u.com/rosetta-stone-portuguese-c-4.html]Rosetta Stone Portuguese[/URL][/b]
[b][URL=http://www.rsoutlet-4u.com/rosetta-stone-russian-c-15.html]Rosetta Stone Russian[/URL][/b]"

Reset the Playbook by holding down ALL three power, volume up and volume down keys for about ten seconds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why does it show 54 photos on my About screen, when I have only 9 photos on my iPad mini?

Hello,
I have an iPad mini 2 (16GB White Wi-Fi) that I got for Christmas of 2013, and absolutely love it. I have had no problems so far. However, there is one thing that annoys me a little.
On my iPad, I have 9 photos that I took with the camera. On the About screen, it says I have 54 photos, and I have no idea why! I've disabled iCloud photo sharing, but I still have no idea why this is happening.
Does anybody know how to fix this? Any solutions would be greatly appreciated.
Thanks!

Do those 'extra' movies have a little cloud symbol? That means that you have access to the movie but it's stored in the cloud until you download it.
You can go into settings, scroll down to video and then change the setting 'show all videos', if it's showing all of them it shows what's on the device and available in the cloud. If it's not, then all you see is what's actually on your device.

Can I create a short cut on the home screen to accessibility settings on an ipad

Hi, have a partially sighted sister who uses an iPad, is there an easy way for her to switch between voice over on/off and white on black? without having to go into settings and then scroll down to the appropriate menu
thanks

Patrick Duncan wrote:
Can I create a short cut on the home screen to accessibility settings on an ipad
Patrick ~ Yes, see this post:
Shortcut to Bluetooth Settings
...For quick access to Accessibility settings, set up the shortcut icon with this URL(Homepage) — case sensitive:
prefs:root=General&path=ACCESSIBILITY

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

A question about screen updation of T61

Hi there
I got a question about screen updation.
Currently, my T61's screen is 14.1 XGA TFT 1028x768, and it can't work, thus I am considering to replace it with the better 14.1" SXGA+ LCD SCREEN .
However, I am a little concerned about the compatiblility problem, hence I just wonder whether the new SXGA+ screen can fit for my current T61 laptop or not?? Thanks a lot for your answers!
Regards
Peng

you can buy it from IBM parts, and it will then sure to work for your laptop.
Here is the manual that shows you how and what parts you need:
http://www-307.ibm.com/pc/support/site.wss/MIGR-67979.html
P.S. If you have warranty this upgrade will void your remaining laptop warranty, as the LCD is not CRU (customer replaceable unit).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

AA3 keeps losing Audio Hardware Setup settings...

I work in a broadcast center with a number of AA3 machines that keep losing their Audio Hardware Setup settings. It keeps switching from the LynxONE drivers to Audition 3.0 Windows Sound. I can find no documentation on this.
I've found that the trigger is when AA3 has "release ASIO driver in background" NOT checked, and the user minimizes it and plays something from another audio program. Then they have to go in and set it back again before AA3 will pass audio again.
Is there any way to prevent this from happening?
Thanks.

In the Options menu. Device Properties. Then you have tabs for Wave In and Wave Out amongst others. Also you may need to also set Device Order from the same Options menu.

Documentation about Screen, Menu and Field Exits

Hi all!!
I need some documentation about Screen, Menu and Field Exits.
I´m very interested specially on steps by steps.
My mail is [email protected]
Helpful posts will be rewarded.
Thanks in advance and regards,
Manuel.

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits 
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
**** Note that you can write any code that satisfy your needs. ****
**** But in this case, this was wrote as a sample code for reference sake. ****
**** And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
reward points if it is usefull..
Girish

Error in About Screen

Hi
I am using SQL Developer version 1.1.1.25, (Build main25.14) and it has error in About Screen,
i am gettign "null" in front of Version number on about screen.
here is the exect text what i am getting
(null) Verision 1.1.1.25
BUILD MAIN- 25.14
so what is the null mean.
Ravi

Null means no value for the string in java. They forgot to set the product name somewhere. Not a big deal, but they should obviously get it fixed. (And yes, mine is broken too)
Eric

Concerned about screen burn in with alarm clock app

I recently downloaded Night Stand HD, then it occurred to me that the clock display would remain on all night. The auto-lock feature needs to be disabled for the alarm to work. Do I need to be concerned about screen burn with the iPad display? I know the latest LCD displays are not susceptible to it, but I want to be sure before I start using it. The app has a dimming feature, but I'm not sure if that is enough protection.
Thanks

Only CRTs and Plasma screens are subject to burn in. The iPad won't.

Concerned about Screen

I know that apple says that the screen is scratch "resistant" but does anyone have any suggestions (beside the obvious.."dont scratch it) about screen protectors. Will they limit the functions or sound of the phone? Any suggestions on which one might be better or are they all the same basically

I bought this along with the iPhone: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=B31 9498&nplm=TN612LL/A
It's easy to apply and it doesn't interfere with the screen functions at all. Best of all it works via static cling so there's no adhesive to mess the screen.

How can I contact Apple about Screen bleeding issue ?

Hey ,
How can I contact Apple about Screen bleeding issue ?
Because they have very complex website and I couldn't find the email .. !!

think as spam took over the internet most companys stopped having a mail address you could write to
http://store.apple.com/us/help/
http://www.apple.com/support/contact/

IPhone 1.1.3 Crashing Camera, Photos and About screen in Preferences

Hi guys:
I've just returned from vacation and the first thing I did when I got in was update my iPhone to firmware 1.1.3. Sweet! So I now have the jiggling icons on my home screen which is awesome, however I can't open Photos or Camera and I can't get to the About screen in Preferences as they appear to crash and I get taken back to the home screen.
I updated from 1.1.2 to 1.1.3 using iTunes 7.6 on Leopard 10.5.1 if this helps
Any advice would be appreciated!

I would say try restoring your phone w/ iTunes and see if that clears it up. There might just be a glitch in the software after the update.

I can't access "control panel" on my 4s from the lock screen. My settings are active

I can't access "control panel" on my 4s from the lock screen or home screen. My settings are active.

You can try resetting Settings>General>Reset>Reset All Settings
if not
Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

About Screen - Hardware (in Settings)

Similar Messages

Maybe you are looking for